Related
Hi!
I've ordered a cappy from ebay, it was listed as bricked with download mode stuck. How can i reflash it if i don't know what rom has been installed on it (froyo or gb)? I don't want to permanently brick it so i ask for your help. I don't have it yet but it's better to know the know hows. Any tips, suggestions would be greatly appreciated! Thanks!
use Odin 1 Click. It will load the bootloaders for Eclair 2.1. As far as I have read, it won't brick it. Earlier, I installed the one click Cognition Gingerbread, and I was able to go back to stock using One Click Odin.
Whatever you do, don't use the 3-button fix to go back to stock from Gingerbread - it will certainly brick it by mixing bootloaders.
Disclaimer: I am not responsible if it bricks!
Thanks, i will try that.
Beware though that My very first captivate had this problem and it wasn't software issue, I had dropped the phone and afterwards it would only boot into download mode, the only way I could get it to boot the OS was a flash, but the download mode would show back up later on. I had it replaced under warranty, that was 3 cappies ago, should be recieving the third today in the mail
Hi!
First of all, I thank you all devs doin so much work on these forums, I am going to donate to most of you developing for my phone. I am new to Android (coming from symbian, FINALLY!!). Maybe this helps, I used to read these forums regarding flashing, ROMs, MODs, etc, it didn't make sense till I purchased this SGN. I have little knowledge. So...
I've installed Titanium Back-up Pro (yes I payed for it) then this asked for root access, then I installed/flashed this kernel with root, CWM, Super User and other stuff.
Everything seems fine so far, Titanium says it's ok, I back-ed up all stuff with it.
My questions are:
1. I want to know if this change will remove completely my Samsung warranty? (the author of the modified kernel says that Samsung can track changes done to the sys files like kernel)
2. If Yes, this also mean I cannot update the firmware via Kies anymore?
3. Is there any possibility that the kernel I use to get updated? Does this mean it could conflict with some new firmware version (If I manage to get it updated)?
4. If I update the firmware (if possible considering existing situation), will this put back the original kernel? Is there any side effect?
Please take a minute to understand my concerns. I payed quite some $$.
Danny
dnp_sgn said:
Hi!
First of all, I thank you all devs doin so much work on these forums, I am going to donate to most of you developing for my phone. I am new to Android (coming from symbian, FINALLY!!). Maybe this helps, I used to read these forums regarding flashing, ROMs, MODs, etc, it didn't make sense till I purchased this SGN. I have little knowledge. So...
I've installed Titanium Back-up Pro (yes I payed for it) then this asked for root access, then I installed/flashed this kernel with root, CWM, Super User and other stuff.
Everything seems fine so far, Titanium says it's ok, I back-ed up all stuff with it.
My questions are:
1. I want to know if this change will remove completely my Samsung warranty? (the author of the modified kernel says that Samsung can track changes done to the sys files like kernel)
2. If Yes, this also mean I cannot update the firmware via Kies anymore?
3. Is there any possibility that the kernel I use to get updated? Does this mean it could conflict with some new firmware version (If I manage to get it updated)?
4. If I update the firmware (if possible considering existing situation), will this put back the original kernel? Is there any side effect?
Please take a minute to understand my concerns. I payed quite some $$.
Danny
Click to expand...
Click to collapse
1.Rooting voids the warranty, but good thing, flashing back to stock, you regains warranty.
2.You can update via kies (If your currant firmware same as it shud be for your country, b'coz if you manually update newer firmware, which was not released over kies in your country, Kies wont recognise and so you cant update) but, You will lose Root + CWM
3.Usually you will get newer kernel according to your firmware from thread you have used early. But to be practical almost newer near release kernel works for others. e.g. I am using CF Root KL7 for LA4
4.It depends on the way you are updating, If tou update over Kies OR with PC Odin, it will replace with original Kernel. Too keep Rooted n preserve CF root Kernel, you have to use Mobile Odin/ CWM to update firmware.
You may get details of updating newer firmware here
http://forum.xda-developers.com/showthread.php?t=1424997
go through post#2 n 3 in detail
Excellent!
Thanks for your quick reply!
Sounds like you have the freedom to do all around upside down: go "illegal", go back to legal, but there seem to be more for me to understand:
Ok, suppose I proceed with update via Kies, I loose ROOT and CWM. Then, if I want to put back the root and the CWM, I need to find one compatible and it's not going to be for the same KKA I have right?
1. If your device is rooted then the their is so warranty.
2. Yes.. you will not get updates from Kies. (if you are rooted)
3. You can flash Official ROM and Kernel via PC Odin. (Warranty Revoke)
4. you have to flash Official PDA, PHONE, CSC Via Odin PC.
Then you ll get complete Official warranty. Be careful while flashing. Read everything.
Follow this thread for more details about flashing and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1424997
---------- Post added at 02:42 PM ---------- Previous post was at 02:42 PM ----------
Doc u too fast..
I don't fully understand this new language, it's a bit confusing.
Anyway, I am now trying to connect Kies and it does not allow it initiated from computer, but from the phone itself, via browser.
dnp_sgn said:
I don't fully understand this new language, it's a bit confusing.
Anyway, I am now trying to connect Kies and it does not allow it initiated from computer, but from the phone itself, via browser.
Click to expand...
Click to collapse
If you are rooted the device then you cant update from Kies. Just forget about kies.
if you want update device, download Firmware from above mentioned thread and extract it.
you should get 3 files.
Download Odin from the same thread.
Open Odin Attach those 3 files as mentioned in thread.
(i.e : PDA= CODE_xxx , PHONE: MODEM_xxx, CSC: CSC_xxx)
UnTick Re-Partition and leave Auto Reset and F.Reset time ticked.
1. turn off your device .
2. Put device in download mode by pressing Volume Down + Home + Power hold it for 3 - 5 seconds.
3. Device will prompt you to press volume up to continue and volume down to cancel. just press volume up then you can see Downloading mode screen.
4. Connect your data cable to device and PC.
now you can see yellow colored block on Odin and shows "Device Added".
5. Click start. Thats it wait until it restarts.
Thanks again, excellent!
dnp_sgn said:
Thanks again, excellent!
Click to expand...
Click to collapse
after install feedback...
Goodluck..
I will give you feedback once I have the chance to update, my phone has the latest update now.
dnp_sgn said:
I will give you feedback once I have the chance to update, my phone has the latest update now.
Click to expand...
Click to collapse
Ok now I understand there is a new update XXKKA but it's not available for Mobiles in my country, but it's available in Germany (everytime they have it first).
I will purchase a MicroSD in the next couple of days and back-up my apps and user data, then I will try to flash this latest firmware XXLA4.
I hope I can upgrade firmware with CWM so I can keep my data, my accounts, my apps and settings.
My question is now, my firmware now is XXKKA (my phone says it's the latest), is there any conflict with this latest XXLA4 or maybe kernel issue? I don't know much about these, I am just concerned.
dnp_sgn said:
Ok now I understand there is a new update XXKKA but it's not available for Mobiles in my country, but it's available in Germany (everytime they have it first).
I will purchase a MicroSD in the next couple of days and back-up my apps and user data, then I will try to flash this latest firmware XXLA4.
I hope I can upgrade firmware with CWM so I can keep my data, my accounts, my apps and settings.
My question is now, my firmware now is XXKKA (my phone says it's the latest), is there any conflict with this latest XXLA4 or maybe kernel issue? I don't know much about these, I am just concerned.
Click to expand...
Click to collapse
Here one think you should notice that LA4 is an official update for only some regions. it means if the LA4 dint released in your region , Kies wont Support LA4 too even it is an Official.
I suggest you to update to LA3 , any way ICS will be releasing soon for our Note. and Don't bother about Kies update. more over in this ROM you ll get warranty too.
Thanks again man, I guess you will be assisting me at that time
dnp_sgn said:
Thanks again man, I guess you will be assisting me at that time
Click to expand...
Click to collapse
any time....
I think I have an idea, what if we will work together to do a documentation here on how to do it, you help with the know-how, I help with the copyright (I used to write documentation, so my language will be clear as the blue sky ).
Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Hey I had similar issue - tried flashing new firmware w/odin & stuck with download only... I finally went to a Bell store to send it in, but they were able to use new firmware recovery software to re-flash stock gb2.3.3! I just said Kies messed-up the phone... Anyway, it will get you back to stock functionality. Good luck!
Sent from my GT-I9000M
vassosman said:
I highly doubt that Bell will release a new update for the i9000m. You are better finding a newer rom (JVT or newer) and flashing that via Odin. Im using CM9 nightlies (but I feel it has too many bugs for daily use). If you can find a newer rom that is tweaked, you should notice better battery, faster, etc.
Just my $0.02
Click to expand...
Click to collapse
I have not found any bugs since I update to the latest update-cm-9-20120425-NIGHTLY-galaxysmtd-signed.zip
bioniceric said:
The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Click to expand...
Click to collapse
Since you can still get into download mode, you're OK.
You can download the UGKG3 ROM files from this thread:
http://forum.xda-developers.com/showthread.php?t=1102881
Search for UGKG3.
The file is in 7Zip format. If you don't have something to unpack it, get IZArc.
Flash the 3 files and you should be up and running.
bioniceric said:
Hi XDA developers,
I'm a newbie. I've been searching posts on xda and still couldn't remedied the problem. I currently have the i9000m from Bell Canada. I upgraded my i9000m to 2.3.3 Gingerbread earlier in Kies. Recently, I've been trying to unlock my phone and without rooting, the best solution seems to be going back to Eclair, so I followed the youtube tutorial by djeddieone and tried to go back to Eclair using Odie. It basically flashes a rom (I suspect that's a T-mobile rom that shouldn't be flashed onto my phone) in Odin. My phone no longer boots and cannot get into recovery mode. (When I try to start the phone, there are random colour dots showing on the screen.) The only mode that works seems to be downloading mode. I think I need to flash a stock rom from bell, but the link on sammobile (i9000ugjk3) seems to be expired and cannot be downloaded. So i'm trying to find alternative ways to see how to remedy this problem.
Thanks in advance.
Click to expand...
Click to collapse
After you restore your phone to KG3 via Odin/Download mode per Black Rose's link earlier in this thread, you should be back where you started on KG3.
Then from KG3 ( 2.3.3),
I suggest:
1) Use SuperOneClick to root your phone (SuperOneClick can also UNroot your phone later if you want).
2) Use Galaxy_S Unlock by Helroz available on the G-store.
This worked well for me with no problems.
And just for reassurance, NEVER flash a ROM that is not explicitly for the i9000/i9000M to this device.
Alright so here goes, I was rooted on GB and I didn't get an OTA notification, so I unrooted (using the latest Open Europe GB stock rom) and I still didn't get an OTA notification. So i went into Kies, updated the it to the latest version before plugging my phone in, and now it says that my device does not support updating via Kies. Is there any way to get official ICS without rooting again (I'm giving the phone to my mom, and when I was rooted there were one too many issues with stability and usability).
You can use PC Odin to get ICS.
Okay, where can I get the rom for it, and will it void the warranty (I know that rooting also does, but I unrooted and I want to have my mom just be able to send it off for repair rather than having me go over there, unroot or do whatever needs to be done before sending it away).
kkg720 said:
Okay, where can I get the rom for it, and will it void the warranty (I know that rooting also does, but I unrooted and I want to have my mom just be able to send it off for repair rather than having me go over there, unroot or do whatever needs to be done before sending it away).
Click to expand...
Click to collapse
Look under the Android Development category for DrKetan's thread with stock ROMs. You can download a non-rooted ICS, I think. And if its not rooted it won't put a triangle on the screen or mess with the binary counter.
Sorry, i know this is a noobish question, but i got kind of confused. When I odin the rom, should I unzip it or not? When I unzip it, then it gives me the md5 (which I know how to flash) but also a .dll so what should I do with that?
Hello There
Try to reinstall the kies with the update version in the official site.
just follow the instructions in Dr. ketan's thread, he even has screen shots for the procedure.
So I was trying to root my i9000m and I read a forum post that advised me to update the soft key fw before doing so... little did I know I was on a custom fw already so it broke my soft key functionality. I've read a few posts that have instructions to fix the problem, by rooting the stock fw for the model and updating soft key fw before rooting again. problem is my phone was originally on FROYO and I can't locate the original file anywhere. can anybody point me to a file dl for the stock fw, or maybe someone has the file on their computer they would be willing to share? it's a bit frustrating not having the keys to go back, and i can't use certain apps due to not having a menu key..
If you don't find what you are looking for, try updating to a custom ROM that includes a Navigation Bar, as shown in the attached pic.
What's the ROM in the screenshot?
It's SlimBean 3.1 = Jelly Bean 4.1.2
With this ROM you can have up to 5 soft keys in the Navigation Bar.
This way you could care less about the phone's soft keys.
There are sites such as this one where you can find official Samsung roms
http://www.sammobile.com/firmware/?page=3&model=GT-I9000M&pcode=0&os=1&type=1#firmware
If you did manage to root your phone, you could also try this: http://forum.xda-developers.com/showthread.php?t=1832638
Thanks nyloncrack, I didn't know that there were roms that included a nav bar! I will try that, and Marshian I've gotten the firmwares from sammobile but apparently my original firmware for the i9000m (Canada) was 2.2.1, which I have found, but apparently not found the proper version of the rom that came stock with my phone. I believe it was 2.2.1 froyo. I am currently running 2.2.1 froyo.xwjsd which seems to not be the correct version.
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Marshian said:
There's a thread here with a couple of roms for the I9000m, other than that I'm afraid I can't really be of any use to you. Good luck though!
Click to expand...
Click to collapse
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
trickassfoo said:
I got the jl2 rom and reflashed and it worked! I downloaded UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): reflashed with pda, phone, and csc checked and then updated the touchkey firmware and voila! I got them from the same link you posted, just before you posted it, bang on Marshian!
It was actually really simple once I wrapped my head around it, now I just need to update to a newer, faster custom rom! now let's see if I can't get this rooted and unlocked again without messing it up . any suggestions for a good, bug free rom? I haven't looked into it too much yet but i hear ice cream sandwich and jellybean are recommended for my device?
Click to expand...
Click to collapse
Good to hear!
I've got the I9001 so I don't really know what kind of roms are available for you, but in my experience for my own phone ICS is currently the best trade-off in features and stability. JB is still quite new and not fully ported yet, while ICS is nearly bug-free. It could be different for your model, that's just my two cents. Either way, as long as you don't brick your phone you could always try out a couple of roms and see what you like best. The only downside is changing a major version requires a full wipe.
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
nyloncrack said:
I used this to go from gb to ics.
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
This way your i9000m becomes a i9000 for searching out new ROMs.
For whichever ROMs (ICS or JB) you'll always need to flash the KG3 modem.
Click to expand...
Click to collapse
I've tried using that guide before but the JVP link is invalid. i did a quick google search am i just looking for Gingerbread? because I have a file already on my computer titled "CF-Root-XX_OXA_JVP-v3.7-CWM3RFS.tar"
Yes, that will work.
Looking at my notes from back then I actually also used:
CF-Root-XX_OXA_JVT-v4.3-CWM3RFS, and
CF-Root-XX-_OXA_JVU_2.3.6-v4.3-CWM3RFS
They were just later versions of GB.
JVU was Samsung's appeasement to i9000 users when they were told ICS wasn't coming. Had a couple of ICS features; window dressing.
Remember to make a full backup before touching anything this time
I've been trying for hours but I cannot for the life of me get windows to recognize the device in download mode. It was working fine until i updated the rom, then intermittently, then i updated the rom again and it has stopped working. i've uninstalled the drivers, tried with debugging on and off, restarted windows, installed the newest version of kies, bought a new usb cable, to no avail. this is maddening. is there a better alternative to do this on my mac? I'm using a virtual system running windows but I'm positive that isn't the problem, since it was working great before on vmware, and parallels. any ideas? I'm about a half hour away from selling this device and going back to the iphone haha.
so basically my question now is how do I downgrade back to the original firmware, so I can put this nightmare behind me? I had it unlocked and rooted on gingerbread before... don't ask me how it took many many hours. now the device isn't even being recognized in kies. If I don't get this figured out soon i'm flipping this b*tch for an iphone 4, because I do appreciate the one touch jb/unlock. I've literally wasted days of my life trying to figure this out and it doesn't seem to be getting me anywhere. too bad because I really appreciate the android system and all its capabilities but I don't have the time to waste on stuff like this
Another Edit! So, after fussing and fiddling, I decided to try one more time, I swear, I was actually going to give up at this point if it hadn't worked. so basically I removed kies, loaded the driver i was using, which was 1.3.450.0 and it didn't work, so I loaded 1.5.5.0 and it connected! My guess is that after updating the rom the driver was outdated, but I figured kies would give me the most up to date driver, seems it didn't oh well, I'm almost afraid to load ics since I've worked so hard and wasted so much time up to this point, but i've come this far...
one more edit, the kg3 modem kept crashing odin on me so I had to stick with the jl2 that was flashed earlier.. which doesn't give me network access, I'll try to find another file but is there any reason odin should be crashing like that due to this particular file?
hahaha, shouldn't speak too soon, jl2 works after reboot, should I update my modem firmware now, and what is recommended for my system {2.3.4} kernel {2.6.35.7} and if i flash to ics will I need kg3? Thanks for all the help with this seemingly never ending process