No zv8 OTA update after MT's zv7tozv8 flash. - LG Revolution

First off, here is what I was following: http://forum.xda-developers.com/showthread.php?t=1583023
I have followed instructions and am stuck on step 4: Update to zv8. I cannot get the OTA update to initiate. I have waited 48 hours for it to automatically push and have tried to manually get it by initiating Check New under About Phone. It states that I do not have an update.
Before MT's instructions, I was on GV2.0 with Blitzkreig on zv7. Flashing his zip file was smooth. Just not getting the zv8 OTA.
Here is my phone's current state:
SW Version: VS910ZV7
Build #: GRJ22
Kernel: 2.6.35.7-perf [email protected] #1
Android Version: 2.3.4
With Root Checker Pro, it states that I have root. I have Superuser installed. I checked in Titanium Pro to make sure I don't have Software Update 1.0 frozen, and I do not. In Rom Manager, I tried flashing CWM and did not have issues. When trying to boot into recovery via Rom Manager, it just sticks on a blank black screen after the LG splash screen. When booting after a poweroff using Power+Vol Down, I get a prompt asking whether or nt I want to do a factory reset. I can accept or cancel. I do not get to the CWM recovery menu.
Not really sure what I need to do. The phone is functional, just hate LG's UI.
I would like to get to Breaked Out on zv8 if possible. I would probably even be fine with GV2 on zv7, but I cannot get to CWM to flash GV2. I still have that zip on my external SD.
I did some searching and did not find answers on similar issues like mine. If I missed it, my apologies. Please direct me to the thread I missed if I have done so.
Thank you!

The first time you boot into revovery you go through the "delete everything" screen. I freaked my first time and prayed I didn't lose everything.
Edit: Be 100% positive you are rooted and have CWM installed before though. Don't blame me if it all goes to hell..
Sent from my VS910 4G using xda premium

There is a method now for rooting zv8 without the need to downgrade. So I would suggest grabbing the zv8 tot file and using lgnpst to flash to the most current software, then use the root method found here:
http://forum.xda-developers.com/showthread.php?t=1621625
[root] root for vs910zv8 without downgrade
Then you should be able to push cwm using mts aio package and flash broken out, plus the fantastic oc kernel
Sent from my VS910 4G using xda premium

keynith said:
The first time you boot into revovery you go through the "delete everything" screen. I freaked my first time and prayed I didn't lose everything.
Edit: Be 100% positive you are rooted and have CWM installed before though. Don't blame me if it all goes to hell..
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
I did that actually. The phone just rebooted. Right now, I don't care about losing apps. All my personal images and what not are on my External SD, so not worried about losing that info either.
elreydotcom said:
There is a method now for rooting zv8 without the need to downgrade. So I would suggest grabbing the zv8 tot file and using lgnpst to flash to the most current software, then use the root method found here:
http://forum.xda-developers.com/showthread.php?t=1621625
[root] root for vs910zv8 without downgrade
Then you should be able to push cwm using mts aio package and flash broken out, plus the fantastic oc kernel
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
OK... so this sounds promising, but if you don't mind asking a couple of my questions before I go down this road.
I looked at your link and didn't find an answer to the following questions:
1. Are there any pre-requisites to following your linked method? (Like do I need to be on a particular Kernel, SW or ROM for that method to work?)
2. The final result will be rooted stock zv8, correct?
My current state is zv7. My main concern is that you need to be on zv8 already in order to run through the method you Linked.

winabi said:
My current state is zv7. My main concern is that you need to be on zv8 already in order to run through the method you Linked.
Click to expand...
Click to collapse
That's right - you can use LGNPST to get to ZV8, then use that Root Method. I had the same trouble as you did with getting the OTA - I kept getting errors and could not get the update, even though a month ago it worked fine with mt's zv7 to zv8 root zip (I actually was the first person to test that method). I finally gave up and figured out how to do it using the new root method and one of mt's other tools and I am back on BO 1.1 now. I detailed how I did it here:
http://forum.xda-developers.com/showpost.php?p=25483585&postcount=15

winabi said:
I did that actually. The phone just rebooted. Right now, I don't care about losing apps. All my personal images and what not are on my External SD, so not worried about losing that info either.
OK... so this sounds promising, but if you don't mind asking a couple of my questions before I go down this road.
I looked at your link and didn't find an answer to the following questions:
1. Are there any pre-requisites to following your linked method? (Like do I need to be on a particular Kernel, SW or ROM for that method to work?)
2. The final result will be rooted stock zv8, correct?
My current state is zv7. My main concern is that you need to be on zv8 already in order to run through the method you Linked.
Click to expand...
Click to collapse
Nothing particular that you need to be on as far as ROM is concerned. I can't find the thread right now but in the development section there is a list of the stock software versions, the most current being zv8. Essentially all you will need to do is download that and use lgnpst to load it on your phone. it's basically forcing the latest update to your phone instead of waiting for the ota to happen. After that, follow the link in my previous post to download the root script and run that. The end result is stock rooted zv8.
Sent from my VS910 4G using xda premium

I rooted it with the new method for zv8, and MTs CWM package didnt work...
follow the directions in the first post on this thread to get cwm...
http://forum.xda-developers.com/showthread.php?t=1594885

OK... so it looks like I'm going to attempt:
http://forum.xda-developers.com/showthread.php?t=1621625
I'll let you know the results once I have something to report back. Thanks for the assistance so far. I really appreciate you guys taking the time to respond.

OK... so I misread some things.
http://forum.xda-developers.com/showthread.php?t=1621625
is for those already on ZV8. So I am still on ZV7.
I will attempt http://forum.xda-developers.com/showthread.php?t=1211295 with dl'ing PS910ZV8 and using LGNPST to install it even though i'm currently ZV7.
Then, I'll use the Esteem Root method to gain root and MT's AIO for CWM.
Is that good?

that should be the ticket.. Good luck!
Sent from my VS910 4G using xda premium

OK... so the upgrade to ZV8 was so smooth. Thanks for pointing me in the right direction! The only snag is that when registering the .dll, I had to do it through cmd as an administrator since I'm on W7 64bit. No worries though.
Now I have run into a snag where MT's CWM Recovery for ZV8 is failing. Please see the attached screenshot of the failures.
With Root Checker Pro, it says that i have successfully rooted my phone and BusyBox is successful too.
When I try to reboot into CWM from MT's CWM Recovery for ZV8, it sticks on a blank screen after the LG logo splash screen. The same thing happens when rebooting into Recovery from Rom Manager.
Am I missing something?

RESOLVED!
OK... so I did some searching and found this thread: http://forum.xda-developers.com/showthread.php?t=1594885&page=2
On page 2 about halfway down, I find a post by Slimzim of a discussion with MT:
slimzim said:
I finally got this to work much more easily thanks to a quick talk with mtmichaelson. Here's the method:
1) Get to ZV8 (I got there via LGNPST)
2) Root using the tool found here: http://forum.xda-developers.com/showthread.php?t=1621625
3) Open a Terminal Emulator
4) Type: su
5) Hit enter
6) Type: echo 'ro.kernel.qemu=1' > /data/local.prop
7) Press enter
8) Reboot
9) Use the ZV8CWMRecovery.bat found here: http://forum.xda-developers.com/showthread.php?t=1583023
Good luck!
Click to expand...
Click to collapse
I dl'ed a terminel emulator and followed the instructions. I now have CWM!!!!!
Now... time to get broken out!
Thanks to everyone's help! I seriously appreciate it.

winabi said:
When I try to reboot into CWM from MT's CWM Recovery for ZV8, it sticks on a blank screen after the LG logo splash screen. The same thing happens when rebooting into Recovery from Rom Manager.
Am I missing something?
Click to expand...
Click to collapse
Yes - same thing happened to me when I followed your steps. Follow this:
http://forum.xda-developers.com/showpost.php?p=25483585&postcount=15
Steps 3 through 8 are what you haven't done yet. Try them and see if it works. If it doesn't work try using LGNPST to go back to unrooted zv8 and try again (not sure if that'll be necessary).

Related

[Q] HTC HERO 2.32.651.2 Root Help

PLEASE SEE BOTTOM OF OP FOR STEP BY STEP WALKTHROUGH
Hello Guys,
I’m a Sprint HTC Hero owner who is trying to get CM 6.1
My device has the latest OTA update 2.32.651.2
I went ahead and tried z4root which has 2 options, temporary and permanent. Went ahead and did temporary and it stated that it was rooted. Superuser shows up in my apps, so I went ahead and installed ROM manager as a youtube video said (gave a full successful walkthrough)…I open ROM Manager up and it says – You must root your phone for ROM Manager to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
Now using Astro File Manager, I checked those directories and it wasn’t there as ROM Manager stated, but in my SD Card, I see su-2.3.1-bin-signed…
Now my question is, should I try it with permenant root?
If not, what is the recommended next step?
Should I delete/uninstall everything I have that’s related to my previous root attempt and do the following:
http://forum.xda-developers.com/showthread.php?t=804296
I’m an Accounting major and a noob at this stuff…and I see people helping each other out here which is awesome, but I get confused trying to keep up with some posts where people are sent to other posts and so forth :/
Thank u in advance! Happy Holidays!
-------------------------------------------
Below is the process on a step by step basis from which i was able to complete it with the help of skndeep102. Thanks again buddy!
-Download z4root here: http://forum.xda-developers.com/showthread.php?t=833953
-Install and run app, press on Permenant Root
-Let it run until it says it has completed
-Once it has completed you will see the Superuser app in your drawer
-Download Rom Manager from the Market
-Open Rom Manager and press on Flash ClockworkMod Recovery at the top (give it a bit as it has to download it and then install)
I had already downloaded the CM 6.1 rom and had it on the SD card
-So i went ahead and hit reboot to recovery in ROM Manager
-Once it is in recovery, go ahead and scroll down to Nandroid and do a backup
-once you do a back up press back and reboot
-Once it starts up again head over to ROM Manager and select Install ROM from SD Card
-Look for the Rom, select it, and it asks you to Wipe Device and Cache, select both
-It reboots to recovery, select the rom and install
I hope i didnt miss a step, but thats pretty much it if i remember it correctly (spent much more time reading than actually doing, lol) Also, if there is something that isnt touched upon here just go ahead and read through as several questions were asked and answered along the way.
Hope it helps!
* Process confirmed to still be working as of 1/5/2011
da305kratos said:
Hello Guys,
I’m a Sprint HTC Hero owner who is trying to get CM 6.1
My device has the latest OTA update 2.32.651.2
I went ahead and tried z4root which has 2 options, temporary and permanent. Went ahead and did temporary and it stated that it was rooted. Superuser shows up in my apps, so I went ahead and installed ROM manager as a youtube video said (gave a full successful walkthrough)…I open ROM Manager up and it says – You must root your phone for ROM Manager to function. Superuser was not found at “/system/bin/su” or “/system/xbin/su”.
Now using Astro File Manager, I checked those directories and it wasn’t there as ROM Manager stated, but in my SD Card, I see su-2.3.1-bin-signed…
Now my question is, should I try it with permenant root?
If not, what is the recommended next step?
Should I delete/uninstall everything I have that’s related to my previous root attempt and do the following:
http://forum.xda-developers.com/showthread.php?t=804296
I’m an Accounting major and a noob at this stuff…and I see people helping each other out here which is awesome, but I get confused trying to keep up with some posts where people are sent to other posts and so forth :/
Thank u in advance! Happy Holidays!
Click to expand...
Click to collapse
I used permanent root when I did this
Sent from my HERO200 using XDA App
i am in the same position...the recommendation to me was to RUU to an older version and then root. I am not sure how to do that, so im hoping someone has another solution.
I personally dont trust those one click root options. Manual root requires a little more reading but I have never had an issue that way.
You can always try the permanent option. I dont see why you wouldnt want permanent anyway. If you use the temporary, its gonna unroot you when you reset your phone.
skndeep102 said:
I used permanent root when I did this
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Did the permenant root allow you to continue with the process?
RUU back to an older version just requires that you have the htc drivers installed and the ruu exe. You just double click the ruu exe and follow the instructions.
da305kratos said:
Did the permenant root allow you to continue with the process?
Click to expand...
Click to collapse
Yeah it worked for me I was rooted and had clockwork mod in about 10 minutes
Sent from my HERO200 using XDA App
kbizzle said:
RUU back to an older version just requires that you have the htc drivers installed and the ruu exe. You just double click the ruu exe and follow the instructions.
Click to expand...
Click to collapse
Where can I find the RUU? HTC's official site?
skndeep102 said:
I used permanent root when I did this
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I'm in the process of trying it...its been stuck at Rebooting for a couple mins now... :/
Wait and see at this point, i guess...
OK so I did the permenant root...and appearantly it worked since z4root is telling me it is and it now gives me the option to re-root and undo root...Also, when I open Rom Manager, it isn't telling me to root the phone...
However, I saw in another forum that a way to check if it is rooted is to download a terminal emulator and type in "su" after the $ ...When i do that it tells me permission denied....
What next?
da305kratos said:
OK so I did the permenant root...and appearantly it worked since z4root is telling me it is and it now gives me the option to re-root and undo root...Also, when I open Rom Manager, it isn't telling me to root the phone...
However, I saw in another forum that a way to check if it is rooted is to download a terminal emulator and type in "su" after the $ ...When i do that it tells me permission denied....
What next?
Click to expand...
Click to collapse
Just use room manager to flash clockwork mod recovery and you're done flash the rom of your choice
Sent from my HERO200 using XDA App
I went into ROM Manager and pressed on Flash ClockworkMod Recovery, it does its loading thing on the bar right ontop but it doesnt say anything...normal?
skndeep102 said:
Just use room manager to flash clockwork mod recovery and you're done flash the rom of your choice
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
It says that I must have ClockworkMod Recovery installed to flash and restore roms.
Where do I get this?
Just a heads up, it seems the root works, the su file is in bin and i tested out drocap2 screencapture app and gave it superuser permission. Worked perfectly...now if i could know where to get ClockworkMod Recovery as the Rom Manager I got from the market did not bring it :/
Use the "un-option" and try another method. I installed a stock ruu on my phone this morning to update my prl and tried the same app. It doesn't flash everything you need like the "flash_image" file. You need that to flash a recovery. I just re-rooted my phone the same way I did back in July. Take note that I am with cellular south and all I had to do is run a batch file and oila, there I am sitting in recovery. If you want to try another "root via app" method, you can try this-->View attachment UniversalAndroot.apk .
Instructions:
Open app and root
Download Rom Manager(which you have) and flash cm recovery.
I still think it probably won't work, but you can try anyway. I think these "rooting apps" only do enough so you can use apps like "AddFree"(or whatever it is) and others like it.
EDIT: In Rom Manager, the very first tab(up at the top) should say"Flash ClockworkMod Recovery". Press that one. It would ever flash for me until I went back to me nandroid.
dean.d said:
Use the "un-option" and try another method. I installed a stock ruu on my phone this morning to update my prl and tried the same app. It doesn't flash everything you need like the "flash_image" file. You need that to flash a recovery. I just re-rooted my phone the same way I did back in July. Take note that I am with cellular south and all I had to do is run a batch file and oila, there I am sitting in recovery. If you want to try another "root via app" method, you can try this-->View attachment 465856 .
Instructions:
Open app and root
Download Rom Manager(which you have) and flash cm recovery.
I still think it probably won't work, but you can try anyway. I think these "rooting apps" only do enough so you can use apps like "AddFree"(or whatever it is) and others like it.
EDIT: In Rom Manager, the very first tab(up at the top) should say"Flash ClockworkMod Recovery". Press that one. It would ever flash for me until I went back to me nandroid.
Click to expand...
Click to collapse
I see what you mean...Can anyone else pitch in on the aprt in regards to the rooting apps only doing enough for rooted apps use?
I read in another forum that I could just get the apk for ClockworkMod Recovery, install it, and then Head Over to ROM Manager and continue the process? any truth to that?
da305kratos said:
I see what you mean...Can anyone else pitch in on the aprt in regards to the rooting apps only doing enough for rooted apps use? I read in another forum that I could just get the apk for ClockworkMod Recovery, install it, and then Head Over to ROM Manager and continue the process? any truth to that?
Click to expand...
Click to collapse
Found the same thing. Just didn't work like that for me.
dean.d said:
Found the same thing. Just didn't work like that for me.
Click to expand...
Click to collapse
quick question, performance difference between stock 2.1 and lets say most roms out there a huge difference?
anyone else care to throw some input into my situation?
Happy Holidays btw...
Just a heads up, what worked for me, once I was rooted and downloaded ROM Manager I had to install Superuser.apk, then when I tried to flash clockwork recovery I got the Superuser dialog box asking for permission, then select allow. another awesome program to help is Android Commander that you install on your PC and it provides a gui adb access but you have to have sdk and adb installed on your pc, but if you look around there is info about it available. hope this helps, wish i had more time but i was just home on my lunchbreak, good luck

[Q] Rooted and installed the ICS Rom. Can I go back to Stock if necessary?

Hello. First off, I want to thank everyone for their hard work here. I have followed many tutorials and have seen many great conversations to keep noobs like me from making mistakes when trying to delve into the world of ROMs and rooting. However, I did encounter some troubles while installing the ICS rom onto my bionic (running on .902). I think I may have accidentally overwritten the stock rom backup that I made with safe strap or whatever that app is (I'm sorry, like I said, I am a complete noob). Is there a way to restore the phone to stock, as in before I even touched it, even if the backup I made during the process is gone by my mistake?
I'm sure this has been asked a million times, and if so, I apologize, but as I noob, I have no idea how to even begin to search for clues. Walkthroughs would be nice, but links are fine too, since I'm sure there are plenty of the same questions out there.
Thanks!!!
Pete's motorola tools check it out you will find what you need there just google Pete's tool bionic
Sent from my XT875 using XDA App
Also I believe if you disable safe mode it will boot up rooted stock from don't quote me on that I am not for sure. Also I believe there is a unroot method in development not sure if it is for 902 or not though..
Sent from my XT875 using XDA App
Thanks for the info!
No problem here to help
Sent from my AXI0M IONIC using XDA App
R3l3as3DRoot and for3v3r root will take you back to 886
Sent from the Evil Empire
Thanks! Can that be used after the .902 update? Is it possible to do a dual-boot type deal between stock and the ICS version I have installed? I've seen mentions of dual-boot around here, but I can't get a clear grasp on whether it is possible or not, or if so, how to do it. Thank you very much!
Lonepalm said:
Thanks! Can that be used after the .902 update? Is it possible to do a dual-boot type deal between stock and the ICS version I have installed? I've seen mentions of dual-boot around here, but I can't get a clear grasp on whether it is possible or not, or if so, how to do it. Thank you very much!
Click to expand...
Click to collapse
Yeah I'm sure you can.
Get on stock .902(here).
Install SafeStrap.
Backup Stock Rom by Toggling "SafeMode"
Boot up ICS.
When you want to go to Stock .902 undo "SafeMode" and the Stock Rom should boot up on Reboot
Thanks for the answer! Hopefully I can give this a shot soon!
Lonepalm said:
Thanks for the answer! Hopefully I can give this a shot soon!
Click to expand...
Click to collapse
Yeah those instructions above are correct. I just came back from the AOKP ICS Rom to stock. 902. Worked fine. I have all my apps and stuff too.
Sent from my DROID BIONIC using Tapatalk
Don't know what I'm doing wrong here, but when I plug my phone in to my PC, the phone realizes it, but doesn't seem like the PC does. Also, when I open RSD Lite and try to load the file, it doesn't do anything after clicking "Start". Please help me try to diagnose what I may be doing wrong if you can! Thank you!
Lonepalm said:
Don't know what I'm doing wrong here, but when I plug my phone in to my PC, the phone realizes it, but doesn't seem like the PC does. Also, when I open RSD Lite and try to load the file, it doesn't do anything after clicking "Start". Please help me try to diagnose what I may be doing wrong if you can! Thank you!
Click to expand...
Click to collapse
Enable Usb Debugging and Unknown Sources. Download Motohelper drivers
Sent from my DROID BIONIC using Tapatalk
I'm sorry I probably should be a little more specific. I have both of those enabled and I do have the Motohelper drivers installed. I am following the steps here: http://forum.xda-developers.com/showthread.php?p=22758211#post22758211
On step 8, I do not see a file named FXZ or a file with that extension, but I figured it was the file with the name that the zip file had. I chose that file after clicking "..." and hit Start, but it doesn't do anything.
I am running the ICS version cyanogen mod 9.0.0-rc0-droid_bionic-kang build number alpha_2012_02_10
I already have SafeStrap installed (used that to get this rom on). So, looks like I'm stuck on or around step 8 from the other steps posted. Once I can get past that, I can continue with the steps posted in this thread!
Thanks!!!
Lonepalm said:
I'm sorry I probably should be a little more specific. I have both of those enabled and I do have the Motohelper drivers installed. I am following the steps here: http://forum.xda-developers.com/showthread.php?p=22758211#post22758211
On step 8, I do not see a file named FXZ or a file with that extension, but I figured it was the file with the name that the zip file had. I chose that file after clicking "..." and hit Start, but it doesn't do anything.
I am running the ICS version cyanogen mod 9.0.0-rc0-droid_bionic-kang build number alpha_2012_02_10
I already have SafeStrap installed (used that to get this rom on). So, looks like I'm stuck on or around step 8 from the other steps posted. Once I can get past that, I can continue with the steps posted in this thread!
Thanks!!!
Click to expand...
Click to collapse
SafeStrap disables ADB(that Im sure of) which will not let RSD run(im pretty sure) you have to select the xml file
Sent from my DROID BIONIC using Tapatalk
Yes, the XML file is the one I select. However, it will not do anything in RSD. Is there anything I can do to enable ADB in order to let RSD run?
Update: I found a way to do it. I think things are going okay so far. Looks like it is installing. If it does install successfully, I would like to do everything perfectly right going forward.
So, after this is installed, I will want to:
1. Get root access again using Motofail? I assume doing this return to stock will remove root access.
2. Install SafeStrap. Once that is done, I toggle Safemode to enabled, which will backup my stock rom and protect it from being overwritten?
3. Then, flash ICS from the zip files on my sdcard?
Lonepalm said:
Update: I found a way to do it. I think things are going okay so far. Looks like it is installing. If it does install successfully, I would like to do everything perfectly right going forward.
So, after this is installed, I will want to:
1. Get root access again using Motofail? I assume doing this return to stock will remove root access.
2. Install SafeStrap. Once that is done, I toggle Safemode to enabled, which will backup my stock rom and protect it from being overwritten?
3. Then, flash ICS from the zip files on my sdcard?
Click to expand...
Click to collapse
Yes sir.
Sent from my DROID BIONIC using Tapatalk

[Q] Error while updating from rooted zv7 to zv8 using Mt's AIO. Please help!

I'm baffled as to what I did wrong during the initial root of zv7 software. I can't unroot, can't recover, can't root to zv8 or upgrade. I'm using MT's AIO root app and just can't seem to understand. I guess there's a reason I'm a noob. this is what i get:
unable to open log device "/dev/log/main" no such file or directory
And then from there it won't add new root files, remove trash etc.
Revolution zv7 zv8 help please!
I would like to just have CWM and Root access on ZV8. On rooted gingervolted zv7. Please help! I will donate money if I have to! I understand a person's time is worth something!
n00bzilla said:
I would like to just have CWM and Root access on ZV8. On rooted gingervolted zv7. Please help! I will donate money if I have to! I understand a person's time is worth something!
Click to expand...
Click to collapse
Root only... update... rootzv8
Sent from my VS910 4G using XDA
You can't keep gingervolt as of right now, but I'm sure a vz8 gingervolt will be coming out. I would first make sure you take an image with cmw before you do anything with your phone.
I first rooted the the device like in the first thread about maintaining root from vz7 to vz8 thread. It worked after I got LGNPST working, but I still wanted CWM. When MT came out with the script, I gave that a try but had permission issues. If you have an image you can restore to pre gingervolt, I would try that, then use MT's tool to apply stock recovery. I had to run the tool twice before it would take and I didn't get anything puking at me and I got stock recovery. Make sure you still have root. I then prepare for update, update, then apply root and cmw.
If you don't have a pre gingervolt image, Follow the instructions to put the vz7 tot back on your phone found here. Then root only. After you have root, I would then prep for vz8, update, then root and install cmw.
If everything is successful, I would take a post install image with cmw.
Thanks a bunch. I will get to this tonight and let you know the results. I have confidence it will work. Since I'm a noob, it won't let me post an image, but I'll upload it to photobucket and hyperlink. Thanks again! PM me your paypal and I will throw some scratch your way.
I'm new to this also so it is some trial and error. Just keep working at it. No need to send me any money. If you want to make a donation, send it to MT, Spc.Hicks or one of the other developers who keep this phone going.
Here's where I'm at with the process.
Still rooted on zv7. Tried to do stock recovery (unroot with zv7 stock rom) but wouldn't recognize my battery or sim card. I am only able to run rooted zv7 with GV 2.0 in order to use all functions of phone. Unable to update OTA to zv8. The stock zv7 will not work, therefore had to flash GV2.0 with root. The problems I had before was sound not working, music player plays, but no sound, and when the phone was on and the screen would turn off automatically, it wouldn't turn back on. The buttons along the bottom would light up, but no screen. It was at this point that I had to return to rooted zv7 with GV2.0.
The Update Process
Hey I had a lot of trouble coming from MT's 2.0 V7 to V8 Root with Revovery. Let me see if I can help. This method worked for me. Follow it if you like.
1. First start from scratch using LGPST and V7 .TOT. Just follow the instuctions from the [FIX] Updated by accident? thread by hilong08.
http://forum.xda-developers.com/showthread.php?t=1211295
I did have trouble installing the .dll. Just run the CMD as an administrator to install it without errors.
2. Run the old All in one from MT to root your phone only.
http://forum.xda-developers.com/showthread.php?t=1348557
3. Once its rooted download terminal emulator from the market and do this
Type su and then enter you should see a "#". Next type echo 'ro.kernel.qemu=1' > /data/local.prop. It should create a file called local.prop in your /data directory.
you could manually do it with root explorer too.
4. Now wait for the Verizon OTA (over the air) update or manually search.
5. Now you should be on V8.
6. Run the AIO bat by MT to root and install CWM , option 2. I believe we manually did option 1 so theres no need to do it once on V8.
http://forum.xda-developers.com/showthread.php?t=1566729
7. You should be root with CWM. I thought I didnt install this right the first time after about 3 fresh installs over a period of 2 days. CWM is installed man, even if you dont see it, i had to use quick boot from the market to boot into revovery.
Another thing if your phone loses sound check your /data/local.prop and change it to local.prop.bak and reboot. I also had a problem and it was freaking me out.
good luck
Stop V8 notifications
If you want to keep your phone from trying to update while in V7, use root explorer to rename /system/lib/ libdme_main.so to libdme_main.bak; I renamed three days ago with no update notifications to date. http://forum.xda-developers.com/archive/index.php/t-1236896.html
I'm still not getting anywhere. I'm back to root with gv2.0 with no sound. I'm just afraid to do anything else. Can someone call me or do a remote session? I'm ****ing retarded.
No no no. Go to development section and flash the v8 tot. Easiest way to get to v8
Sent from my ADR6425LVW using Tapatalk
pdriscoll2 said:
If you want to keep your phone from trying to update while in V7, use root explorer to rename /system/lib/ libdme_main.so to libdme_main.bak; I renamed three days ago with no update notifications to date. http://forum.xda-developers.com/archive/index.php/t-1236896.html
Click to expand...
Click to collapse
I'm actually considering going back to ginger volt 2.0. I really don't notice any differences on v8 except that I have a bunch of bloatware. I lost all the things I loved about my phone, like the number percentage on the battery status. now I have a huge E911 cross hair icon I can't seem to get rid of.
DelFrogo said:
I'm actually considering going back to ginger volt 2.0. I really don't notice any differences on v8 except that I have a bunch of bloatware. I lost all the things I loved about my phone, like the number percentage on the battery status. now I have a huge E911 cross hair icon I can't seem to get rid of.
Click to expand...
Click to collapse
I hear you. I'm holding off until MT gets a new and stable Gingervolt released for it. My phone works just fine on V7 w/GV2.0. Why fix something that isn't broken?
Ok I finally got my phone back to stable working condition with gingervolt and root on zv7. Can someone tell me step-by-step how to stop the zv8 update? Were going to have to dig deep on this one. I'm shallow on my terminology, and have no clue if I even have root explorer, or how to use it. I really wish there were college classes on how to understand this stuff. I know it's linux based, but you really have to be passionate about this stuff to understand. If you guys wanted to know about bikes, I could tell you how to build one from scratch! To each their own i suppose. Thanks in advance for everyone's help getting me this far. I really do appreciate all your hard work.
Freeze ZV8 update
n00bzilla said:
Ok I finally got my phone back to stable working condition with gingervolt and root on zv7. Can someone tell me step-by-step how to stop the zv8 update? Were going to have to dig deep on this one. I'm shallow on my terminology, and have no clue if I even have root explorer, or how to use it. I really wish there were college classes on how to understand this stuff. I know it's linux based, but you really have to be passionate about this stuff to understand. If you guys wanted to know about bikes, I could tell you how to build one from scratch! To each their own i suppose. Thanks in advance for everyone's help getting me this far. I really do appreciate all your hard work.
Click to expand...
Click to collapse
Noobzilla,
Here is how another user took care of the update. Take some time and look through the development section here as well. I know there are some ways to move to the update and maintain the root as well.
Originally Posted by brad6360 View Post
MT doesn't have GV working on V8 yet, but he's working on it. I used Titanium Backup to freeze my 'software update 1.0' app. There are other ways around it though that other people have posted.
Noobzilla
Lot of us are waiting for MT to release GV 2.1 with V8 update. I was in your boat and planning to go back to stock just to see how V8 updates looks like. After reading the forms a lot of us decide to wait for new release. I would honestly suggest to wait for few weeks, stock V8 has so much bloat that you may not like it. I would suggest to donate to MT and other developers because they really rock. Just my 2 cents.
Darn i didn't know about ur service sold my Yamaha R1
Sent from my VS910 4G using XDA
Noob you need to get back all the way stock on zv7 so either use the zv7.tot file or flash the zv7 backup my has posted in the development section after you have flashed the zv7 backup your going to run the zv7 all in one and select unroot this will unroot and put stock recovery on your phone after you have stock recovery and no root your going to run Mrs new all in one to get you where you need to be I haven't done this yet so you may have to run the other all in one selecting the option root only then run the new all in one easiest way for help is getting on the irc channel you might have to wait a little bit for help but someone will show up. Also give thanks to mt for creating this all in one for you guys eliminating the need for you guys having to learn how to use adb but I encourage everyone to get the sdk and learn how to use adb as your next phone may not have options such as a all in one check out this thread in the thunderbolt forum on how to root unlock and install cwm recovery on it. It will really make you appreciate all the work my has put into making these all in ones the script doesn't know what to do until my has typed all this stuff already.
Here is the thunderbolt method. http://forum.xda-developers.com/showthread.php?p=12159325 that's not exactly what's being done on the revolution but still a good read but imagine having to do all that to get root on your phone I encourage reading it as it will help you understand what's going on in a script that particular method was published by jcase who is an awesome exploit finder and this method includes getting temp root in order to flash an older hboot version allowing you to downgrade to a version that had already been unlocked and getting root there enabling you to get perma root and a unlocked bootloader and involves using a terminal and adb and will really get you comfortable with adb and appreciate all the keystrokes mt has saved you. *Also do not try that thunderbolt method on your revolution* I'm not positive what will happen but I am confident it will not be good.
Sent from my Galaxy Nexus using xda premium
Sounds like everyone is waiting for MT to push a new version of GV. I have decided to do the same. I used Root Explorer to change the file extension of the update file. I did this about a day after my last post on this thread and had no problems. Running GV and flashing Fusion as we speak on ZV7. Phone works great. Thanks for everyone's help!

Stock ZV8

Hello all! I am currently on Stock ZV8. Is there any probability that the All-in-one root tool will be updated to support getting root from ZV8? I've tried the downgrade to ZV7 and it just so happens I'm not that skilled to get it to work. Thanks for your thoughts,
-Trevor
I should have updated here and not at the end sorry!
WOW was that fun! I followed the instructions on your link and was able to successfully downgrade to ZV7 non root.
Then I used the Allinone to root while on ZV7.
I then used MT's method here: http://forum.xda-developers.com/show....php?t=1583023 to keep root through ZV8 and get CWM back.
Then I just wiped and flashed breakout.
It wasn't hard, I just took my time and followed each instruction very deliberately. I got confused because it said to extract the .tot file. Well there was no need for that.
It's all fresh in my memory if anyone needs any help Thanks for everyone here helping me!
What kind of problem do you seem to have???
The AIO is simply plug in your ZV7 phone click #1
Update the phone
Click #2.??
The problem is I'm stock ZV8 (not rooted). I cannot get CWM to install so I can't flash to ZV7. It is unfortunate
when i got to ZV8, running #2 didn't work, so i reran #1 from the aio tool then ran #2 and it got me all squared away. i then downloaded quickboot to access cwm.
I guess I'll give it a shot, I didn't think I could root from ZV8
capt730 said:
when i got to ZV8, running #2 didn't work, so i reran #1 from the aio tool then ran #2 and it got me all squared away.
Click to expand...
Click to collapse
I did everything you did up to there but the #1 and #2 didn't work as I ended up in unrooted VZ8.
I though I was screwed so I figured I'd Factory Reset.
Selected Factory Reset.
It rebooted the phone and I suddenly found my self in CWM..
SO I factory reset from there and flashed Break Out..
Reset the phone and ended up back in CWM and I'm currently trying to get around this because it keeps taking me back to CWM no matter what I do
I'm still stock ZV8 I got this error:
http://imgur.com/MZPie
ATM I've gotta say consider yourself lucky your phone boots up. I'm messing around in CWM with backups to see if anything will fix my broken phone. Luckily I've got a backup that used to work, the Stock 7 rom and Breakout and Gingervolt. I'm hoping I can restore/wipe/replace something to let my phone boot
Yeah I think I'll just wait till a ZV8 All-in-one root comes around.
bjordont said:
I did everything you did up to there but the #1 and #2 didn't work as I ended up in unrooted VZ8.
I though I was screwed so I figured I'd Factory Reset.
Selected Factory Reset.
It rebooted the phone and I suddenly found my self in CWM..
SO I factory reset from there and flashed Break Out..
Reset the phone and ended up back in CWM and I'm currently trying to get around this because it keeps taking me back to CWM no matter what I do
Click to expand...
Click to collapse
This might help you get past CWM if you're stuck there:
http://forum.xda-developers.com/showthread.php?t=1525921
It did but I found it here.. http://forum.xda-developers.com/showthread.php?t=1161537&highlight=factory+reset
So you may be able to put this file on your SD card Factory reset your phone from where your at. install your new rom (if thats what you were trying to do) then flash the file above.
I'm just hoping with all the flashing I did above I didn't loose the ZV8 part needed for Break Out to work..
Hey I didnt.. Sweet ish. Now I'm getting the force close which apparently is fixable. I'm happy now
whhs41 said:
The problem is I'm stock ZV8 (not rooted). I cannot get CWM to install so I can't flash to ZV7. It is unfortunate
Click to expand...
Click to collapse
You do not need CWM installed to get to V7. Just go here, follow instructions and choose the V7.tot http://forum.xda-developers.com/showthread.php?t=1337386
If you are using Windows 7, I would recommend turning UAC off before installing LGNPST. It will save you alot of headaches.
sleepycarl5150 said:
You do not need CWM installed to get to V7. Just go here, follow instructions and choose the V7.tot http://forum.xda-developers.com/showthread.php?t=1337386
Click to expand...
Click to collapse
WOW was that fun! I followed the instructions on your link and was able to successfully downgrade to ZV7 non root.
Then I used the Allinone to root while on ZV7.
I then used MT's method here: http://forum.xda-developers.com/showthread.php?t=1583023 to keep root through ZV8 and get CWM back.
Then I just wiped and flashed breakout.
It wasn't hard, I just took my time and followed each instruction very deliberately. I got confused because it said to extract the .tot file. Well there was no need for that.
It's all fresh in my memory if anyone needs any help Thanks for everyone here helping me!

[Q] I Still Don't Get It...

Hello all,
Okay, I'm a total noob when it comes to the LG Revo. I had my D1 and my DX and I worked it all out and had it setup and rooted just fine, but the LG and this OTA ZV8 update is killing me. So here is my dilemma.
First I don't get the lingo...clockworkmod (CWM) = boot screen/command screen, right...like dos kinda?
Second, flash? What is that is that where I hold power + volume down button to get boot/command/dos screen, when phone is powered off?
Okay now for the good crazy stuff. I had my Revo rooted, got the update, failed. Figured it was because the root was on it, so unrooted to push OTA update, still fail...is still epic failing and is getting on my last nerve, so badly I'm ready to throw my phone...and I've never wanted to that to my babies (phones). Anyway, unrooted still failing update.
Was on another forum where very nice guy gave me stuff to do, tried it however, when did the "Flash" it only wiped my phone and put it back to stock. Had phone plugged into computer via USB...tried to follow http://forum.xda-developers.com/showthread.php?t=1583023 but after phone wiped didn't know what to do. This is where I am now, with a wiped phone and this has been since 9am pdt.
Hope this all makes since. Can anyone offer any help here? I'd like to get my Revo back up and running and I'd really love to get my apps back on so I can function.
Thanks for understanding and your help is greatly appreciated. Oh, please talk to me like I'm a noob lol...Or I won't get it, I promise I will do my best and try not to sound as dumb as I feel right now.
Thanks &
*Edit* I forgot, I read somewhere that in order to use CWM the phone had to be rooted so I couldn't've flashed to it anyway? Is that wrong information?
The reason why your update fails is because you haven't taken off CWM I'd point you in the right direction but I'm doing this by phone
Sent from my VS910 4G using XDA
Thanks Gel, at your earliest convenience will you please walk me through it? I'd really appreciate it and would be a very happy camper if you get back functioning.
I wish I could explain how I did it. I thought I updates to V8 with no root and was really mad but then somehow I had root.
Sent from my VS910 4G using xda premium
SmokinHawtVegasChic said:
Thanks Gel, at your earliest convenience will you please walk me through it? I'd really appreciate it and would be a very happy camper if you get back functioning.
Click to expand...
Click to collapse
I'm currently at a computer until around 8:15 so I could assist you whenever you get back on.
Gel Pen6 said:
I'm currently at a computer until around 8:15 so I could assist you whenever you get back on.
Click to expand...
Click to collapse
Getting on comp now.
Sent from my VS910 4G using XDA
I'm here.
SmokinHawtVegasChic said:
I'm here.
Click to expand...
Click to collapse
Use this http://webchat.freenode.net/ then go to #lgrevolution so it'll be easier to communicate.
Waiting patiently.
So still not fully functioning. Gonna just reinstall my apps and let the update keep trying to push. Have a great day all.
Sent from my VS910 4G using XDA
Guess what...phone has not tried to update since I wiped it. Running fine though. Uh...have only tried to push update manually once. Had guy here try to help me but we got lost with the zv7 it wouldn't let me upload from the site linked here. As I'm running 2.2.2. He said I needed to be on zv7 before I could get to zv7. Anyway all is okay so far will try this again this weekend.
Sent from my VS910 4G using XDA
SmokinHawtVegasChic said:
Hello all,
Okay, I'm a total noob when it comes to the LG Revo. I had my D1 and my DX and I worked it all out and had it setup and rooted just fine, but the LG and this OTA ZV8 update is killing me. So here is my dilemma.
First I don't get the lingo...clockworkmod (CWM) = boot screen/command screen, right...like dos kinda?
Second, flash? What is that is that where I hold power + volume down button to get boot/command/dos screen, when phone is powered off?
Okay now for the good crazy stuff. I had my Revo rooted, got the update, failed. Figured it was because the root was on it, so unrooted to push OTA update, still fail...is still epic failing and is getting on my last nerve, so badly I'm ready to throw my phone...and I've never wanted to that to my babies (phones). Anyway, unrooted still failing update.
Was on another forum where very nice guy gave me stuff to do, tried it however, when did the "Flash" it only wiped my phone and put it back to stock. Had phone plugged into computer via USB...tried to follow http://forum.xda-developers.com/showthread.php?t=1583023 but after phone wiped didn't know what to do. This is where I am now, with a wiped phone and this has been since 9am pdt.
Hope this all makes since. Can anyone offer any help here? I'd like to get my Revo back up and running and I'd really love to get my apps back on so I can function.
Thanks for understanding and your help is greatly appreciated. Oh, please talk to me like I'm a noob lol...Or I won't get it, I promise I will do my best and try not to sound as dumb as I feel right now.
Thanks &
*Edit* I forgot, I read somewhere that in order to use CWM the phone had to be rooted so I couldn't've flashed to it anyway? Is that wrong information?
Click to expand...
Click to collapse
Ok... here is what you do to get root. Follow that thread and install the v8 tot.
http://forum.xda-developers.com/showthread.php?t=1337386
After the lgpnst program completes (around 20min) successfully you will be running the latest v8.
Once that is done. Connect your phone set the usb to internet and turn on debugging from the settings | applications | development section and then follow this the instructions in this thread. Unzip the file and run the bat file and follow the directions in the command window.
http://forum.xda-developers.com/showthread.php?t=1621625
As for clockwork mod (which a basically is a program that can be run before android loads that allows you to make low level system changes, when you make these changes it is called flashing) I am not running it on my phone but I am sure someone here can tell you how to put it on your phone running v8 rooted.
Here are the instructions for getting ClockWork Mod onto your phone with rooted v8 (located at the bottom of page 2)
http://forum.xda-developers.com/showthread.php?t=1594885&page=2
Haxcid said:
Ok... here is what you do to get root. Follow that thread and install the v8 tot.
http://forum.xda-developers.com/showthread.php?t=1337386
After the lgpnst program completes (around 20min) successfully you will be running the latest v8.
Once that is done. Connect your phone set the usb to internet and turn on debugging from the settings | applications | development section and then follow this the instructions in this thread. Unzip the file and run the bat file and follow the directions in the command window.
http://forum.xda-developers.com/showthread.php?t=1621625
As for clockwork mod (which a basically is a program that can be run before android loads that allows you to make low level system changes, when you make these changes it is called flashing) I am not running it on my phone but I am sure someone here can tell you how to put it on your phone running v8 rooted.
Here are the instructions for getting ClockWork Mod onto your phone with rooted v8 (located at the bottom of page 2)
http://forum.xda-developers.com/showthread.php?t=1594885&page=2
Click to expand...
Click to collapse
Hello, followed the instructions all the way to:
10. Right Click "VS910.dll" and click on Install/Register.
Note: DLL WILL NOT INSTALL UNLESS COMPONENTS AND GENERICMODELS PLUG-INS ARE INSTALLED!!!
IF YOU CANNOT INSTALL IT ON A RIGHT CLICK GO TO "C:\Windows\System32" and drag the VS910.dll on "regsvr32" and it should install.
It won't VS910.dll dragged onto "regsvr32" will NOT install. I get an error message:
The module "C:\LG Electronics\LGNPST\VS910.dll" was loaded but the call to DllRegisterServer failed with error code 0x80020009.
What do I do now?
Are you using windows 7? If you are, disable user acct control and try it then. I had issues with windows 7 64 bit?
Sent from my VS910 4G using xda premium
capt730 said:
Are you using windows 7? If you are, disable user acct control and try it then. I had issues with windows 7 64 bit?
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Thanks, it helped, however, now I'm stuck here:
16. Select "VS910ZV4_04.S4_04.P58008.R5.user.tot" and Click OK
17. Then click on Upgrade
It says "The file can't be open.
Any ideas?
SmokinHawtVegasChic said:
Thanks, it helped, however, now I'm stuck here:
16. Select "VS910ZV4_04.S4_04.P58008.R5.user.tot" and Click OK
17. Then click on Upgrade
It says "The file can't be open.
Any ideas?
Click to expand...
Click to collapse
Type". " and then go to the tot file and you should be able to open it.
Sent from my GT-P7510 using xda premium
Sharkeyd said:
Type". " and then go to the tot file and you should be able to open it.
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
Typed "." with both just the dot and then again with the quotes and nothing. According to my computer the file is on C:\ but I can't find it in LGNPST there. And it's not in any of my other files that I can see.
I think I did something wrong...But I followed it exact. Becoming very disconcerted with my Revo.
At that point you should explore into the directory where you put the .tot file. Copy the location, go back to the LG tool and paste the directory location. It should allow you to open the file. If you have any problems please respond.
gimpcell said:
At that point you should explore into the directory where you put the .tot file. Copy the location, go back to the LG tool and paste the directory location. It should allow you to open the file. If you have any problems please respond.
Click to expand...
Click to collapse
Ok, so moving along on this lol...I've followed all of the instructions. Downloaded, uploaded, installed, copied, pasted, created new folders, dragged and dropped everything it told me to do.
This file "C:/VS910ZV4_04.S4_04.P58008.R5.user.tot.bin" is only showing up in my computer as a shortcut, not as a file. This is after researching and finding it on my computer. Did I do something wrong? Am I downloading an incorrect file? I'm not sure where this particular file came from as, everything else is as described in the "how to" threat.
I think I may have figured it out. Will get back to you. Thanks again!!
*EDIT* Was told to use VS910ZV7_10.S7_10.P58008.R5.tot ... did...it updated...now to see what to do next. That other was was ZV4 and the one I just updated to is ZV7... woot wish me luck...manually pushed zv8 update...no failure this time...it was successful. yay!
Haxcid said:
Once that is done. Connect your phone set the usb to internet and turn on debugging from the settings | applications | development section and then follow this the instructions in this thread. Unzip the file and run the bat file and follow the directions in the command window.
http://forum.xda-developers.com/showthread.php?t=1621625
Click to expand...
Click to collapse
Now for this part. It's not rooting. And yes, I have ZV8 on my phone, now. I have a root-required app on my phone just to test to see if it's rooted and it keeps saying that it is not. I'm such a noob, I know. Sorry :-/

Categories

Resources