During update phone get stuck i canceled the updated now hd7 do no re-boot it stuck on htc logo and vibrates few times. However i am able to get into boot loader mode my spl is SPL-5.11.2250.0 and it belongs to O2 UK any help to store the phone ? I dont have zone backup and zune does not recognize the fone how ever i am able to see usb mode while in bootloader.
Thanks in advance for help
thanks
.....
sounds like the memory card chip is fraaaaaaaah'd boi
ubfortunately, and obviously, there is no way to unfry it, however you can replace it.
Follow the instructions in another thread in this forum on how to change the memory card (i think its called "upgrade your hd7 to 32gb" or something
you have to buy a new sd card, id recommend that you go for a 32gb rather than the same size
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Related
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
I don't think you'll get much help here as this is the WIZA100 & WIZA200 forum, not the HERM300...
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
You say that your device is still able to enter bootloader...? If this is correct then you do not have a brick. I understand that you do not have a Wizard, but a Hermes.
This is what you need to do:
Download the Hermes Official WM5 T-Mobile Rom
Put your Hermes in bootloader mode
Connect to your PC via USB
Run the ruu_hermes_tmhu_1.21.116.4_1.05.02.00_wwe_ship.exe that you just downloaded and you should have a working Hermes again.
Next time you want to upgrade your phone, you will want to read into what you are doing VERY extensively. You will find volumes of information under the Hermes sub-forum or in the WIKI under Hermes.
Good luck. Post back here if this was helpful just so I know I didn't waste my time.(thanks)
Non-Free Way to Unbrick
I bought one of these that was bricked one time. (for super cheap). After hours of trying stuff I broke down and paid $30 at imei-check.co.uk They sim unlock and CID unlock all at once. The result was an UNBRICKED phone. I still sold it and made about $100 profit. I think an HTC employee with insider info runs the site. Good luck.
I recently flashed my opal to wm 6.5 and it worked perfectly fine. Yet today when I tried to install a software which would help display chinese character, after reboot, it got stuck in the smart mobility screen. I have tried hard reset and it didnt work. HELP ME!!!
Try entering the bootloader, plugging it in, and on a PC, flash the stock ROM back with the RUU. And for future reference, questions should be posted in the Q&A forum or in you device's relevent forum instead of here, as Development and Hacking is reserved for the development of software.
Dave
try this ...
if you can't enter boot-loader, and obtain a regular active sync connection (in order to reflash) you must try to flash from your sd card.
here you will find some instructions for htc Polaris (i own one) but you have to search the forum how is that to be done for htc touch opal.
it should be something similar there for your opal, and this worked for me in the same situation on my polaris.
good luck !
Hello guys, I'm very new in this forum, and I have 3pcs. htc G1 from Tmobile U.S.A that I only can do go to TRI-COLOR mode ( by pressing END button + BACK button ) or ( END button + CAMERA button )
I never ever fix any of HTC G1 before so please kindly help me on this process.
all 3 pcs. of HTC G1 are all can do this mode only byHARD reset won't work so I know have to flash it but I don't know how to do it and what flash file or ROM I have to use. I have made GOLDCARD from my sd card already I know that is the first step to do!
Please help thank you all
I would help but I don't even understand the question lol.
Just copy the DREAMIMG.nbh to the sdcard and start bootloader. It'll install and boot.
follow instructions... http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_HTC_Dream
mymiela0419 said:
Hello guys, I'm very new in this forum, and I have 3pcs. htc G1 from Tmobile U.S.A that I only can do go to TRI-COLOR mode ( by pressing END button + BACK button ) or ( END button + CAMERA button )
I never ever fix any of HTC G1 before so please kindly help me on this process.
all 3 pcs. of HTC G1 are all can do this mode only byHARD reset won't work so I know have to flash it but I don't know how to do it and what flash file or ROM I have to use. I have made GOLDCARD from my sd card already I know that is the first step to do!
Please help thank you all
Click to expand...
Click to collapse
G1ForFun said:
I would help but I don't even understand the question lol.
Click to expand...
Click to collapse
ok, let try to explain to be clear
I have 3 pcs. of HTC G1 from Tmobile U.S.A that can only goes to boot mode ( TRI-Color mode ) every time I press regular TURNON keypad it won't work
but when I press END button + BACK button it will go to boot mode ( stripe color ) where it say all version of the HTC G1.
And I do have have called AXEBOX it is unlocking repairing tool for HTC but no one in support team help me how to solve the problem and I made a GOLDCARD ( from SD card ) using this tool.
Now, my problem is that I don't know how to flash ROM for ANDROID PHONES, this is my very first time to encounter a a HTC G1 to repair a software.
understand now?
so the problem is how to use GOLDCARD & to try to flash new ROM to my 3 pcs. G1 to repair the software issue.
I have the ROM flash file on my SD card but cannot flash it from SD card only, I think I need to flash it via usb cable to computer. and every time I plug the G1 it doesn't recognize from my computer even though I have the active synch already
try the link that i showed u.. takes u from rooting, to flshing new rom....and read a lot, u know too little, anything anyone would say, wud confuse u...
mymiela0419 said:
ok, let try to explain to be clear
I have 3 pcs. of HTC G1 from Tmobile U.S.A that can only goes to boot mode ( TRI-Color mode ) every time I press regular TURNON keypad it won't work
but when I press END button + BACK button it will go to boot mode ( stripe color ) where it say all version of the HTC G1.
And I do have have called AXEBOX it is unlocking repairing tool for HTC but no one in support team help me how to solve the problem and I made a GOLDCARD ( from SD card ) using this tool.
Now, my problem is that I don't know how to flash ROM for ANDROID PHONES, this is my very first time to encounter a a HTC G1 to repair a software.
understand now?
so the problem is how to use GOLDCARD & to try to flash new ROM to my 3 pcs. G1 to repair the software issue.
I have the ROM flash file on my SD card but cannot flash it from SD card only, I think I need to flash it via usb cable to computer. and every time I plug the G1 it doesn't recognize from my computer even though I have the active synch already
Click to expand...
Click to collapse
Welcome to XDA-Developers.com. I hope you enjoy your stay.
That said, please do not post non-development threads in the development subforum. Any questions should be posted in the Q&A subforum. For that reason, I have moved this thread.
ivanmmj said:
Welcome to XDA-Developers.com. I hope you enjoy your stay.
That said, please do not post non-development threads in the development subforum. Any questions should be posted in the Q&A subforum. For that reason, I have moved this thread.
Click to expand...
Click to collapse
sorry... I'm new user. Hope someone can help me on this problem with 3 pcs. G1
Hello guys I manage to repsit one of the G1 that is in my hand by using the sd card with DREMING.nbh and flash it via sd card. The problem now is the other 2 pieces is not responding every time do the procedure it gives me error...
after ( tri-color )
loading....
say NO image file! then goes back to tri color mode!
Any other solutions or how to flash this via usb from computer...
Thank you all
Please can someone help me out here.
My MDA compact V has been playing up and not recognising my SIM after I removed it to copy my contacts onto my new Galaxy S.
I thought I would take it into TMobile store so I used TopazSPLRelocker_SPL133
and flashed the original stock ROM and now my phone starts, comes up with the TMobile bootscreen and sticks.
Cannot connect to Activesync to do anything or install HARDSPL again so i can flash another ROM
I have looked at solutions in the forums and was going to attempt making an HTC goldcard but I don't have a working Windows Mobile Device to read the serial number of the SD card as instructed in the guide.
Can anyone please help or point me in the direction where I can get some help ?
Thanks to all who reply
You can connect through bootloader mode and flash just as with active sync
Thamks for that, after much messing around I have managed to return the phone to the stock release of WM6.5 from TMobile UK
Taking it back to the shop to be sent away hopefully as the blasted thing still will not recognise any SIM that is placed in it ?
Thanks for the help anyway.
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as ;
PD29*** SS-BC(4K)
SPL -5.11.2250.0(134400)MNG
sd sandisk 15193MB
partition info-v211v413
F400
but it doesn't shows "serial" and it doesn't connect to pc.
what should i do,pls help
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Evo4eva said:
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Click to expand...
Click to collapse
thanx for your reply,as i have never challenged u or my customer that i can repair any handset that i have recieved.i have discussed here the fact that its the customer's fone.and your reply is not to the context.Just read my problem and u have any solutions pls advice for the same if not just go to other post.
hi majeed
i have read in another post, that someone else has had the same problem...no seriel or usb on screen, dont worry about it.
once in bootloader just plug phone to pc and do what you have to do...still worked for them.
cheers and have a gr8 day
Thanx bro for reply but i have tried connecting in same condition to different pc's but i get error :260
not sure what your trying to do after you are in bootloader??
you have bootloader 5.xx
therefore you can only install same stock rom or find same but earlier rom to downgrade ur hspl. must be same region too.
cheers and have a gr8 day
Hi jhonny,
i tried to downgrade bootloader according to tutorial of ansar and his rom found somewhere in this forum and got hspl and rspl.first i tried to use rspl of dft but i could not succeed and got an error and then onwards no "serial" in boot loader screen and the result not at all connecting to pc.tried again resurrectin with riff but no use.
majeed said:
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as...
Click to expand...
Click to collapse
hi majeed, is the unit still under manufacturer warranty
HI MAJEED...
WHAT EVER I UNDERSTAND THAT YOU HAVE HALF BRICKED YOUR DEVICE.
YOU CAN ONLY REPAIR YOUR DEVICE USING GOLD CARD METHOD.
http://forum.xda-developers.com/showthread.php?t=893152