Please can someone help me out here.
My MDA compact V has been playing up and not recognising my SIM after I removed it to copy my contacts onto my new Galaxy S.
I thought I would take it into TMobile store so I used TopazSPLRelocker_SPL133
and flashed the original stock ROM and now my phone starts, comes up with the TMobile bootscreen and sticks.
Cannot connect to Activesync to do anything or install HARDSPL again so i can flash another ROM
I have looked at solutions in the forums and was going to attempt making an HTC goldcard but I don't have a working Windows Mobile Device to read the serial number of the SD card as instructed in the guide.
Can anyone please help or point me in the direction where I can get some help ?
Thanks to all who reply
You can connect through bootloader mode and flash just as with active sync
Thamks for that, after much messing around I have managed to return the phone to the stock release of WM6.5 from TMobile UK
Taking it back to the shop to be sent away hopefully as the blasted thing still will not recognise any SIM that is placed in it ?
Thanks for the help anyway.
Related
Hey there everyone, I am pretty new to this forum so I must apologize for throwing you all into the deep end. I recently purchased an o2 XDA mini S second hand from a guy on boards.ie here in Ireland. I got the phone and really liked it because it allowed me to get rid of my Dell Axim X3i and mp3 player and keep it all in one device.
After a little bit of more research I discovered that I could remove some of the bloatware from the o2 xda mini S by just hard resetting and choosing the basic option which I than did. Still not satisfied with the overall performance of the XDA I decided to try a rom upgrade. Not wanting to do a totall overhaul I decided to just do a radio upgrade first.
My device is sim unlocked, it was like that when I bought it. I used the latest wizard service tool to CID unlock the device before I even flashed the phone. I also used the wizard service tool to change the nk.nbf file within the o2 mini S radio update into 96000000-GSM.nb. I then used this file to write to the GSM radio code (Bdk 1) according to the wizard service tool in the hopes that it would upgrade my radio version.
Well when I restarted, nothing of the sort happened, on the boot screen I noticed I was now missing my GSM version and when the phone finally got into windows mobile, it did not pick up any signal even though beforehand it could. The phone also became super slow to the point where it was unusable.
I have gone into bootloader mode subsequently after reading on this forum and tried to reflash with a number of updates with active sync disabled and nothing else running with the phone connected via usb to the pc. None of the updates would even pick up the phone or allow me to flash it.
My phone is pretty much screwed, I have a spare so it is not that big of an issue but I would like to make this usable again if at all possible. So my question is how do I flash a rom while the phone is in bootloader mode?
P.S I forgot to include the Current boot screen details:
IPL - 1.05
SPL - 1.05
OS - 1.5.4.2
Hi,
You can use the Wizard Love Rom from here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Hey there, thanks for the advice, I did download that ROM but like I said before, none of the roms manage to flash my XDA because they all cannot seem to connect to it. Activesync does not even pick it up in windows mode, and even when I have it connected in bootloader mode via usb and I double click on the love rom, it goes through the motions but never managed to "verify the information with the pda"
Try a stock Tmobile ROM but not from bootloader. Also, I would check the activesync app on the device. Make sure it's set to use USB as the default connection method.
A few other steps to try...
Uninstall ActiveSync and install an older version. If still no go, try a newer version.
Try a different USB cable and/or USB port.
Try a different computer with XP, not Vista.
Try flashing it without the SIM card or any memory cards.
If all else fails, you can try the SD card flashing method. There are instructions in the Wiki on how to do it, but always a stock ROM.
Try this one... http://forum.xda-developers.com/showthread.php?t=311027
Updated IPL/SPL and radio 2.69
Hey Devis, I think I have come one step closer, I tried all the suggestions that you made. Except well now my phone will not even go into the operating system when I switch it on. It will boot and the version numbers show but then it just resets itself.
I tried a different usb cable and I am not using vista, tried a different pc and the same result. The one place I did have some marginal success was the sd card method.
Basically what happened is that It backed up the OS from my phone and then reloaded it, not exactly what I wanted since the OS and rom are both screwed on the phone so my question at this point is, is there anyway using the SD card method to load one of the stock roms onto my phone?
I searched around the net and found the opposite to the "r2sd all" function, would be the "s2d" function, would that allow me to flash the phone with a stock rom?
Thanks for your time, I am going to call it a night here in ireland and head to bed.
Ok, if the phone resets then you probbably have a dead/dying battery. Charge it for about an hour or so using the wall charger, not the USB cable. Try to restart it and see if you can get in the OS. I was looking in the SD card method thread and some guy was successful at restoring the image from the SD even though his OS had died. He then had a fully functional phone.
The other thing to do would be to get the image file from someone that has a living and breathing wizard, preferably one with a stock ROM. Since this method is the equivalent of making an image of a PC using Ghost, the restoration of such an image to your Wizard should work just fine.
Just make sure that the other Wizard is SIM and CID unlocked. Or just go buy a Wizard from the store, unlock SIM and CID, copy the image on the SD and flash your device. Or... since u've got a new Wizard in your hands, just take the freaking thing appart and swap the guts return the store bought wizard to the store saying that the thing just doesnt freaking work!
As for the AT commands... it is possible that s2d would workfor you, it doesn't work in my wizard. from what i have been reading it appears that the bootloader is password protected and that password is randomly generated. I haven't played long enough with it to figure out how to get the password.
It looks like you've got some "trial and error" processes ahead of you. There is a wealth of info on bootloader AT commands on Wiki, nothing for the Wizard though. But something may work... not sure.
I could try to get you a ROM dump from my Wizard but I already am on SPL/IPL 3.08 and running WM6. the SPL/IPL version alone wouldn't allow you to restore from my backup.
Hey Devis, thanks for your time, just woke up here, will work some more on the phone today and let you know what is going on
Hey Devis, I did not even get a chance to fiddle around with the phone today, from being able to switch on less than 24 hours ago, it does not even want to switch on now so I am going to officially declared it a brick and move on. Will see if anyone can fix it for me, spent way too much time already when I should be working on my dissertation, thanks alot anyway
Sorry to hear that...
I have bricked one phone myself in the past... my old Pana GD87 and I absolutely loved that phone. I know how you feel.
Good luck with your dissertation.
Hi,
I got given a couple of Treo 750 phones. Both on the Optus Australian Network so I scratched around for days and found the upgrade software. Shows update 2.27
1st one went perfect.
2nd one on same computer got through copying files and executing update and stalled at the start of completing update.
I got the Windows mobile screen show and it just was not loading for ages. Previous one loaded and then asked for input of Date, touch screen settings etc.
The installer can be re run but says no USB connection at the moment.
I have done a hard reset and get the palm display then locks on the Windows Mobile screen.
I saw procedures to use the Mini SD card but the cards I have won't work in any treo, they are not SDHC type but standard 2G ones.
I next found the recovery tool but holding the left lower button and then hitting reset did not work but does work on my good phone where it shows the coloured bars and SPL....
The left button is a bit dodgy so I suspect it may be faulty. Is there anything else I can try?
EDIT: Ok I pulled apart the phone, looks like it had a hard life as broken case around two screws and they would not unscrew easily. Found the tiny button had dry solder joints. Fixed that up and was able to recover using the reset proceedure.
Phone now working.
could you explain in more detail what you did. thanks man
webafile said:
could you explain in more detail what you did. thanks man
Click to expand...
Click to collapse
What would you like to know?
Once I physicaly repaired the phone as indicated in the edit I was able to hold the left hand button (which was faulty) and the reset at the same time that allowed me to get into the SPL mode and recover the phone.
I understand it very little and most posts on these forums are over my head.
I would like windows 6.1 but there is so much information that seems to conflict that I don't know I am game since it is now working on an official 6.0 Optus version.
I am happy to help but if you can maybe tell me where you are at the moment and what you want to acheive and what you have tried I hope I can fill in the gaps for you.
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
thanks man
webafile said:
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
Click to expand...
Click to collapse
Ok to start with what country are you in and what telco were you with eg Vodafone etc as you will need that as a start.
USA and im with AT&A
Try the method describe in the thread below - Mine work
Hi, you might want to try this method
Follow it one by one and do not skip a step
http://forum.xda-developers.com/showthread.php?t=460783
I just did mine last Saturday (it was a Vodafone phone)
AT&T should be easier since the Windows 6 ROM is easier to get
If you'd like to update to WM 6.1, you should upgrade first to WM 6
Something i read about the radio not working to full capacity if you upgrade straight to 6.1
As for the WM 6 ROM, i'm sure you can find it
Good luck
Hi All,
I have a Treo 750 and it WAS running WM 6.0 Professional (OFFICIAL) and I got it onto the phone and then tried to install WM 6.5 and then I downgraded to 5.0 and tried to update back to 6 and it bricked my treo, any of you wonderful xda ppl have any solution?
Also, I have tried installing the ROM again (via SD updater) and it looks like this:
SPLASH1 OK
BOOTLOAD OK
GSM OK
Micro P OK
EXTROM FAIL
OS
Update Terminate
UPDATE FAIL
I cant install the windows installer one as WMDC 6.1 or ActiveSync 4.5 WILL NOT show the device up on the computer. I have Windows Vista Home Basic, and when I tried MTTY, the only ports I get are COM1, COM2, and COM3. I can't get the usb to show up. Even with MTTY 0.01 when I got the USB connection, it would not open. Is it Vista? Or am I not doing it right? ANY HELP WOULD BE APPRECIATED TO GET MY POOR TREO BACK!!!!!!!!!
Thanks
~Mike
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
simunlocktreo said:
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
Click to expand...
Click to collapse
Is this universal (i.e. Hermes/BA/Trinity) or just for the Treo 750. I think what bricked it in the first place was installing a custom rom by veisen (WM 6.5)
~Mike
Didnt Work
That one thing didn't work. It keeps coming up ERROR 226: FLASH WRITE ERROR Anything else???
~Mike
I've got a HTC Touch 3G that was locked on the Orange network. I've got it unlocked and have it working with my O2 SIM however the wi-fi is a nightmare. I want to get my phone to be like how it is when you buy it offline.
I've tried flashing the ROM and it succeeded but nothing seemed to have changed. Now when I connect the phone to the computer with the USB cable, they don't seem to connect. Whats going on?
Please Help!!!
http://forum.xda-developers.com/showthread.php?t=514406
This is the guide that I was following before but I guess I must've been doing something wrong. I followed the guide again and had it do it the hard way (make a ROM from raw using Jade Kitchen) but got there in the end!!!
Now my phone is as it would be bought offline. Thanks guys!
Well i have got a gift from someone ...
its an HTC 8925 TILT2 MODAL and when i switch on the phone wihtout any sim in it it works fine but when i insert the sim it asks me for a UNLOCK KEY which i do not have .....Can anyone guide me ?
Heres the link of the technical aspect of my phone
http://pdadb.net/index.php?m=specs&id=861&view=1&c=at_t_tilt_8925_htc_kaiser_160
One more question ...am i supposed to get a new drive in my computer when i connect phone to my computer via miniusb ?
You obviously didn't read any stickies. It tells you how in this:
http://forum.xda-developers.com/showthread.php?t=533976
And for your other question, you'll only get another drive show up when all the drivers are installed correctly.
i tried installing the unlocker software as mentioned in the manual .but am getting the error 232 . Any idea on how to resolve it ?
Hey guys,
I've searched everywhere but there's no definitive guide to revert to stock from WP7. Pretty much, I tried out WP7 on my dad's HD2, but he didn't like it. So I need to revert it, but there's so much stuff to know that it all gets pretty intimidating.
Anyways,
HTC HD2 w/ Windows Phone 7 (Using aMAGLDR V1.12 - Build: Jan 12 2001, 21:09:22 - by Cotulla 2011 [this ONLY, no other mods present])
Trying to convert back to Windows Phone 6.5
Using Windows XP
Have d/led Windows Active Sync but it won't connect to the PC even when the USB is plugged in. (I'm guessing this is the reason why I can't revert to stock, it won't even connect to the PC)
I've also d/led the latest stock RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship from the forums.
It looks like I have all the resources but my PC won't even recognize the phone being connected to the computer. Must I do anything else besides attempting to flash the stock ROM?
Thanks A LOOOOTTTTT in advance!
I have the Exact same question anybody help please?
It might be you don't have the drivers installed that are needed, your antivirus could be preventing a connection, I had a similar problem where it seemed that it didn't recognize my phone uninstalled sync when into my bootloader it didn't seem to recognize my phone tasked 29 and it went through without a problem
::BUMP::
PLEASE someone help me out, this is getting soo frustrating, I switched to my laptop running Vista and it still won't recognize it.
I d/led Windows Mobile Device Center and it STILL won't work.
Please anyone.
Enter the bootloader screen then plug phone in and wait for it to say USB at the bottom then flash the stock rom from t-mobile
Sent from my FutureShocks HD2 MIUI using XDA App
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
xmoo said:
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
Click to expand...
Click to collapse
dude u been around here long enough, no need for name calling
actually im having the same issue as of today
http://forum.xda-developers.com/showpost.php?p=11418541&postcount=1526
i was able to flash winmo through sd card but 10 different pcs wont see this phone now, from win xp to vista, win 7, mac !
phone works fine in winmo but cant connect, obviously cant flash hspl3 so im stuck on stock winmo, with both spls 2.8 and 2.10 and none of them makes a different
i'll bookmark this and keep following up and if i figure it out i'll update
back to stock LEO
I have same problem i install 2.2 android on my HTC hd2 (t-mobile) and now i can't sync my phone with computer to install stock LEO as well as there is no option on the 2.2 froyo for sd card if any one know how to get back to stock windows 6.5 let me know
I can't find the stock rom on tmobile
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
tmobile stock rom.
Invalid IMEI???
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
webmanny said:
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
Click to expand...
Click to collapse
sure you dont have a desire?
Yes I do I have a Model HTC Desire A8181. It still says HTC HD2, but it says Desire on the phone data screen.
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Will SW upgrade lock my unlocked HD2 to T-Mobile??
Hi
My HD2 from Tmobile is unlocked & am using it in India.
It has SOFTWARE: OS :5.2.21889 (21889.5.0.87), Manila version:2.5.20121412.1
ROM Version :2.10.531.1 (82076) WWE
I am planning to upgrade the ROM to 3.14.531.1.
I read at forum that Post upgrade, my HD2 will default to factory settings. Does it mean that my phone will again be locked to T-mobile?
Pl confirm asap as I don't want a locked phone
Thanks...
no it will never be re locked again, no matter what you do.
Ahh but which one????
samsamuel said:
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Click to expand...
Click to collapse
Ok dude this makes a lot of sense, but which one should I download? Are those version numbers or radio IDs? I don't want to brick my HD2.
Thanks for any help you may give.
those are rom version numbers. go for either 2.10.0 (not .1) or 2.13, or either of the 3.14
dude u have 2 download zune center if u got the wp7 rom thats how u sync the phone
Yes there is a way go to htcpedia.com register with them make your ocunt..and download htc hd2 stuck rom..then put your phone and bootlouder mode..and put the stuck rom you just download..makesure your phone is conecte it at least 50 % of batery no sim car no sd car.
Good luck bro..
sent it from htc hd2 android nexus one custom rom