Help me with unlocking my phone - Tilt, TyTN II, MDA Vario III General

Well i have got a gift from someone ...
its an HTC 8925 TILT2 MODAL and when i switch on the phone wihtout any sim in it it works fine but when i insert the sim it asks me for a UNLOCK KEY which i do not have .....Can anyone guide me ?
Heres the link of the technical aspect of my phone
http://pdadb.net/index.php?m=specs&id=861&view=1&c=at_t_tilt_8925_htc_kaiser_160
One more question ...am i supposed to get a new drive in my computer when i connect phone to my computer via miniusb ?

You obviously didn't read any stickies. It tells you how in this:
http://forum.xda-developers.com/showthread.php?t=533976
And for your other question, you'll only get another drive show up when all the drivers are installed correctly.

i tried installing the unlocker software as mentioned in the manual .but am getting the error 232 . Any idea on how to resolve it ?

Related

Error 114, help me please,I'm helpless.

Hi All
I have a SPV M2000.One day the phone stopped working. Everything was all right, it did ask for pin but then didn't even looked for network,was immediately saying NO SERVICE. I tried few sim cards - the same.
So then I wanted to reinstall the ROM, I downloaded the official from Orange UK , tried to install it,and it shows ERROR 114, Radio Rom Upgrade Error.
And the phone now is in bootloader mode and I can't do anything!
I downloaded different ROM from xda-developers ,at the beggining with a country error, but i managed to fix it and now with this ROM it's the same thing. ERROR 114. I tried everything, hard,soft reset, Pc reset etc. Nothing works!PPC still in bootloader mode!
Please tell me if you know what else can I try!
Guys,come on,really noone knows???
Have you read WIKI? Follow the first method to flash your ROM. Have you remembered to plug in your power supply to your cradle when you flash your device?
Heres another thread on NO SERVICE Plz help... No Service after radio upgrade. Happened to me. Read it and see the advise by MDAIIIUser and TheLastOne. If all else fails, bring it to the shop.
I had a very similar problem....
First I tried to update a whole package that means rom, extended rom and radio
The radio update is always the first one and there always upgrade error 114 occured.
So I updated every part seperately and it works except the radio. So I tried alot but it just didn't work..even downgrading was impossible. MDAIIIuser and happy goat tried to help me as well as they could but nothing had an effect.
So I read in another forum that asus mainboards have some problemes with these radio updates....I thought they were joking...but I tried the radio pdate at another pc and it worked!
I know it sounds a bit stupid but I was desperate and at last it worked!
You can read it here :
http://forum.xda-developers.com/viewtopic.php?p=89657#89657
TRied that method.Doesn't work
Any other ideas?
One more thing.Is it normal that in bootloader mode when I plug the power cable in the charging LED is not working?it was working before.
The battery is charged ,but shouldn't it show that the power is connected anyway?
EDIT: this is a reply to the first answer.
So you think I should try on another PC?I will today!Hopefully it will work.
So I managed to install new rom on a different computer! I think that there was a problem with active sync.I used the one that was installed from my old XDAII.Could that be the reason?Now i installed the one provided with a M2000.
But it doesn't work anyway
Still NO SERVICE message.
ANy other ideas different than taking it to Orange?
Hi rottie,
No Service could mean anything. Could your SIM card be faulty? Device SIM locked? Or hardware faulty? You cannot just use any ROMs you find at ftp. Try to flash your device with full shipped rom at http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade. Use the first method and upgrade using MaUpgradeUt_noID.exe to bypass the Country code error. Remember that you'd need to run MaUpgradeUt_noID.exe twice.
Read wiki carefully, it has alot of precious information. Cheers ^^
Before you update any version you should be sure that your radio is
compatible with your device. Usually all radio upgrades should be
independent off the language of the device but as I understood (could be
wrong) there are differences because of the servicenetwork frequency.
So you must be sure that the chosen radio is compatible and that your
device is not simlocked.
So perhabs you should chose an upgrade of your provider.
But perhabs itis better not to risk your guarantee of your provider by
using updates or components of other providers! Because there could be
the possibility that your device is damaged and you should bring it back!
Good luck!
Guys, you get me wrong.I'm not trying anything what I'll find.
1)One of the ROMs that I tried and the one that I left now is a ROM downloaded from orange.co.uk for SPV M2000. So there can't be any incompatibility, don't you think?
2)I have 2 sim cards,both from Orange,I was using both of them before in my M2000 which is sold only through Orange so there can't be any simlock problem,don't you think?
3)I used only that orange ROM, original and the I-Mate one.None of them were working good,always NO SERVICE.
I bought the phone second hand,with box,all accessories etc. But I don't have a receipt :? And of course have lost the guy's number.That's why I want to try everything before going to the service.
I think this phone is network blocked, probably been reported damaged or stolen, once the insurance or replacement is issued a block is put on the imei of the phone that was subject to claim.

[Help] T-Mobile wiza200

i got a wiza200 G3 IPL/SPL 1.0.6 that is locked to T-Mobile, now the problems are:
1) that i cannot access the Bootloader, i hold down the keys but it just resets and no bootloader comes on.
2) tried hard resetting it, the procedure goes just fine, but does not reset.
3) In addition to my problem the phone has a password set at the boot of windows but i do not know the password
4) when i connect the usb nothing happens(i tried all the possible solutions for this one but i think my usb slot is broken)
5) its SIM/CID locked
6) theres no way of fixing this isnt it?i have searched the whole forum for a possible CID unlock through an SD Card
but as I can see noone has found a solution about that yet..and probably never will..
Update: I managed to hard reset it and it gets in Windows now but the usb still does not work, I have established a connection with ActiveSync through Bluetooth and im trying to use WST and i do 'Enab RAPI + Unsigned Apps' and get good results:
Uploading files...
Running Cert_SPCS.cab to change Unsigned
Prompt policy...
Running EnableRAPI.cab to remove restrictions
on RAPI communications...
All Done!
You can fully use this service tool now.
Repeat procedure only after a hard-reset.
Click to expand...
Click to collapse
but the problem is when i try to CID Unlock i get this error:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
Click to expand...
Click to collapse
Update 2
I Fixed this by manually put EnableRapi in the windows folder of the device and running it.
I used Lokiwiz and tried to CID/SIM Unlock it, but im not sure if it worked, after each step the device rebooted just
like it said in the 'readme' file, now is there any chance to put custom ROM to the device through bluetooth?
any help is much appreciated, thanks in advance
also i have another HTC wizard with custom WM6 if that helps..but its G4
Okay, first of all, your post is somewhat confusing, but it appears you are trying to get a custom rom onto your G3, right?
You already hard reset your phone, so now to deal with the bootloader problem...
1. turn your phone off, and remove the battery just to be sure.
2. hold the camera button on your phone.
3. insert USB cable into the phone.
Now your phone should be in the bootloader mode, and you are ready to start the flashing process!
Flash to the most recent Official ROM. Then follow whatever tutorial you found to flash your phone.
Oh, and I am not sure, but I do not think you should use the bluetoth connection to do the lokiwiz stuff. Use the USB cable. Also, I would suggest you find and learn to use the Wizard Service Tool. It does more, and I think the GUI might be just right for you.
thanks for the reply, but the problem is that my usb port is damaged and i cant get it to work. i managed to unlock cid/sim through lokiwiz using bluetooth, i tried flashing the rom with bluetooth but it wouldnt work and that is normal because when you use a custom ROM installer the installer makes the device go to the RPG mode and there it loses the bluetooth connectivity, is there any other way to install the ROM?maybe with SD Card or something? I have the searched the forums but cant find a solution that actually works
I did a search myslef, and all I came up with was this: http://forum.xda-developers.com/showthread.php?t=366894
My only problem is this: I have never been able to sync a phone through bluetooth without first making a USB connection.
I do not want to upset you, I just want to make sure you don't give up on a possibly working phone.
i can make a connection using bluetooth and unlocked my sim/cid, now i just need a solution to flash the rom without the usb
then you will have to find someone with a G3 that is willing to do what is described in the link I posted above.
can anyone from here help me make this backup sd card?

How to get my jade to be like a new office jade

I've got a HTC Touch 3G that was locked on the Orange network. I've got it unlocked and have it working with my O2 SIM however the wi-fi is a nightmare. I want to get my phone to be like how it is when you buy it offline.
I've tried flashing the ROM and it succeeded but nothing seemed to have changed. Now when I connect the phone to the computer with the USB cable, they don't seem to connect. Whats going on?
Please Help!!!
http://forum.xda-developers.com/showthread.php?t=514406
This is the guide that I was following before but I guess I must've been doing something wrong. I followed the guide again and had it do it the hard way (make a ROM from raw using Jade Kitchen) but got there in the end!!!
Now my phone is as it would be bought offline. Thanks guys!

Hard SPL via MicroSD card

Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
I don't believe it is possible unfortunately.
What issues are you having? Have you tried updating (or even downgrading them depending on what you currently have) the usb drivers?
The probleme that most of us flashing new cooked ROMs & my device get stucked several times. Likely it is connected via USB, Otherwise I can not do any thing.
Also due to several ROM flash times the USB connection in HD (or other devices) might broken.
This why we need a way to install USPL or HSPL via SD card.
Can some one help?
Regards
What I don't understand is how can a usb port become 'broken' due to flashing several custom build roms?
I too having a problem with the usb port on my blackstone. It can only be charged but not synchronized with pc anymore. I had HTC pick up my phone to have the mainboard replaced. Luckily the phone was still under warranty, so it won't cost me much.
Can someone explain?
i had similar probs ...
went to regedit , local maschine, software, microsoft,
windows ce services and changed to (1) the key : hasusbdevice
after this no problems anymore
it seems that a program installation changes this number from 1 to 0.
i have win 7 32
kersey said:
Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
Click to expand...
Click to collapse
This is not possible infortunately. However you do not need your device sync'ed with your pc to run HSPL. You only need to put device into bootloader and then connect it to pc. Bottom of bootloader should change from 'serial' to 'usb'. If not, you will need to update usb drivers. All this info can be found on this thread, no need for another
Thread closed

[Q] Bricked Phone ?

Please can someone help me out here.
My MDA compact V has been playing up and not recognising my SIM after I removed it to copy my contacts onto my new Galaxy S.
I thought I would take it into TMobile store so I used TopazSPLRelocker_SPL133
and flashed the original stock ROM and now my phone starts, comes up with the TMobile bootscreen and sticks.
Cannot connect to Activesync to do anything or install HARDSPL again so i can flash another ROM
I have looked at solutions in the forums and was going to attempt making an HTC goldcard but I don't have a working Windows Mobile Device to read the serial number of the SD card as instructed in the guide.
Can anyone please help or point me in the direction where I can get some help ?
Thanks to all who reply
You can connect through bootloader mode and flash just as with active sync
Thamks for that, after much messing around I have managed to return the phone to the stock release of WM6.5 from TMobile UK
Taking it back to the shop to be sent away hopefully as the blasted thing still will not recognise any SIM that is placed in it ?
Thanks for the help anyway.

Categories

Resources