[KERNEL][GT-I9100G] ClockworkMod Recovery 6.0.1.2 - Galaxy S II I9100G Android Development

CLOCKWORKMOD-RECOVERY FOR GALAXY S II (GT-I9100G)
Click to expand...
Click to collapse
This is a kernel including ClockworkMod Recovery for use on Samsung roms.
Don't use this kernel on aosp based roms like CyanogenMod!!!
Instructions
Power your device off
Boot into Download-Mode using Volume Down + Home + Power
Hit Volume Up to accept the warning
Start Odin
Choose "GT-I9100G_XX_ClockworkMod-Recovery_X.X.X.X.tar" as PDA (no repartition)
Connect your Phone
Start flashing
After reboot you can easily root your device using SuperOneClick
Usage
Volume Up + Home + Power boots your Phone into Recovery Mode.
Volume up: Highlight up
Volume down: Highlight down
Home: select
Power: back
Downloads
ICS - 6.0.1.2: Download
SOURCES
Click to expand...
Click to collapse
https://github.com/teamhacksung/GT-I9100G_ClockworkMod-Recovery
Instructions
- git clone git://github.com:teamhacksung/GT-I9100G_ClockworkMod-Recovery.git
- modify build.sh to fit your needs
- execute it, the final zImage and a flashable tar for odin will be at out/ dir
This is a good base for kernel cooks to start hacking.

Thanks,wish that cm7/9 will follow very soon : ) Cheers

Thanx man ....
Sent from my GT-I9100G using xda premium

great work man...finally got the chance to running a kernel from CM master in my device...

is this kernel modified ? or is it just stock kernel with cwm?

thanks man XD

Toenizz said:
is this kernel modified ? or is it just stock kernel with cwm?
Click to expand...
Click to collapse
dont think its a stock kernel..u might want to see his work through his git source..link in the first OP

using it now.. thanx!

Fast and stable! Really nice kernel! Thank you Codeworkx for your work!
But using Voltage control and save profile for 1200mhz after a few minutes it changes automatically to 1008mhz.. should i use another cpu controll app?

Toenizz said:
Fast and stable! Really nice kernel! Thank you Codeworkx for your work!
But using Voltage control and save profile for 1200mhz after a few minutes it changes automatically to 1008mhz.. should i use another cpu controll app?
Click to expand...
Click to collapse
I think it works depend on ur usage..will go to 1200 once needed like when u playing a game or so on..
Sent from my GT-I9100G

Code the kernel is very smooth..thanks for that...but i found that the vibration is too low...hope u could fix it in the next update
Sent from my GT-I9100G

Toenizz said:
Fast and stable! Really nice kernel! Thank you Codeworkx for your work!
But using Voltage control and save profile for 1200mhz after a few minutes it changes automatically to 1008mhz.. should i use another cpu controll app?
Click to expand...
Click to collapse
Same issue here
Sent from my GT-I9100G using XDA

codeworkx Thanks Bro.

Same here. Love the smoothness!
Sent from my GT-I9100G using XDA

+1
Sent using Tapatalk

vibration is not working
thanks bro..everything is great..but vibration/haptic feedback is very minimal, or can say its not working..also can't use pattern unlock

Thank. Pro that is very smooth.
Sent from my GT-I9100G using xda premium

hi codework , problem is i'm on mac ...can't use odin , so can't i use mobile odin instead ? thank you anyway caring about maldito G man take care

DocteurT said:
hi codework , problem is i'm on mac ...can't use odin , so can't i use mobile odin instead ? thank you anyway caring about maldito G man take care
Click to expand...
Click to collapse
Yes u can..tested and works
Sent from my GT-I9100G

Codeworkx. Thank you very much.. At least you are playing something with your G.
Sent from my GT-I9100G using XDA

Related

[ROM] Fusion Rom

Hi guys!
This is my 2nd custom rom based on Froyo 2.2.2
Its fusion of some of the best roms like megatron(Thanks Noejn) & Mik's Kernel (Thanks Mik)
FEATURES:
Android 2.2.2
Miks Kernel
Sleek & Fast
Better Battery Life
Custom Boot Animation
Root + superuser + busybox
Deodex & Zipalign apks
HW acceleration enabled + JIT enabled
Video & Photo quality enhanced
Build.prop hacks
Thanks all @ XDA for their work and help
ENJOY
If you Want You can Use DarkSky theme as well as Cloudia on this ROM
Download link
http://www.mediafire.com/?t8cu8qbg1660lvs
Glad to see another ROM developer
Thanks!!!
Sent from my LG-P500 using XDA App
Another Great ROM ! Its just perfect for original rom lovers (battery), but added performance tweaks. So all in all - very good combination ! Thanks.
PS: downloading in now, just to test it.
This is good news for when the official 2.3 pops-up, more people to work on making something special.
any1 tried plz leave ur comments so that i can try
hi
looks nice
can we flash franco's latest kenrel on this one??
question, on all the roms i use, when i use internet, charger cannot conpensate the batt loss due to internet usage, how bout on this rom?
Sent from my LG-P500 using XDA Premium App
is it support RTL language ?
@ keypaderror
can you not include the power menu including restart button
and also just wanted to confirm if this rom has inbuilt dt app2sd??
if it doesn't then its fine but id it does, can you make another version that doesn't have app2sd inbuilt?
TIA
cyber_avijit said:
@ keypaderror
can you not include the power menu including restart button
and also just wanted to confirm if this rom has inbuilt dt app2sd??
if it doesn't then its fine but id it does, can you make another version that doesn't have app2sd inbuilt?
TIA
Click to expand...
Click to collapse
I have tested and the rom is working well. Thanks !
cyber_avijit: It includes as2d.
Another ROM by a fellow indian. Its really nice
Thanks
can be flashed with CWM or only AmoRA
iamrajeev said:
can be flashed with CWM or only AmoRA
Click to expand...
Click to collapse
I used AmoRA.
mansirawat said:
I have tested and the rom is working well. Thanks !
I used AmoRA.
Click to expand...
Click to collapse
Thanks mansirawat ....
iamrajeev said:
can be flashed with CWM or only AmoRA
Click to expand...
Click to collapse
All upto you. Else you can flash it with any recovery
Doesn't matter its CWM or AmoRA
What values do I set in the Partition SD-Card in the amonRA recovery??
zekesic said:
What values do I set in the Partition SD-Card in the amonRA recovery??
Click to expand...
Click to collapse
Ext 2,3,4=512mb
Swap = 0
Sent from my LG-P500 using XDA Premium App
I have 3 questions .....
Is it necessary to partition my sd card or not????
what about benchmarks on this rom,can you post some???
And can anyone confirm that divx player works??????
Sent from my LG Optimus One P500 using XDA App
docjayesh said:
hi
looks nice
can we flash franco's latest kenrel on this one??
Click to expand...
Click to collapse
not francos 2.6.35 kernel. only his 2.6.32 kernel
Sent from my LG-P500 using XDA Premium App

[CUSTOM][KERNEL] iDUOS Kernel 1.3.1(Bug Fixed), For Samsung Galaxy Y Duos GT-S6102

Mod Edit: Thread closed due to not complying with the GPL.
Hello XDA Galaxy Y Duos Friend....​
My First Kernel For Galaxy y Duos GT-S6102
Big Thanks To Help Me To Build Custom Kernel
irfanbagus
kurotsugi
Click to expand...
Click to collapse
Big Thanks To Millan.SIS For Great CWM , KernelFlasher And Install Guide And Great TD ROM
FEATURES OF iDUOS Kernel :
INIT.D Support
BusyBox Support
Root Support [ADB Root]
NETFILTER Compatibility with DROIDWAL.
Added Swap Support.
Kernel Info Fix
Added EXT2/EXT3 & EXT4/JBD2 support.
Added NTFS File System (not tested .........)
Added IO Scheduler. {Deadline, CFQ, noop (Default)}.
Added CPU Governor Feature. { Conservative, Ondemand, Userspace,Powersave, performance, bcm21553 (Default) }
Other Patch for Performance
Click to expand...
Click to collapse
Coming Soon Features:
Permanent CWM
And More..
Click to expand...
Click to collapse
HOW TO INSTALL :
Millan.SIS Method
1:/Copy both KernelFlasher.zip & boot.img(kernel) to the root of your sdcard.
2:/ Boot into Recovery using 3 button combo
3:/ apply update from sdcard
4:/ select your ___cwm___.zip Find CWM Hare
5:/Select zip from sdcard... => KernelFlasher2.zip DOWNLOAD
6:/Reboot
IF YOU GOT PROBLEMS PLEASE GO BACK TO THE STOCK KERNEL DOWNLOAD Stock Kernel
Change Log ​
iDuos 1.0
INIT.D Support
BusyBox Support
Root Support [ADB Root]
NETFILTER Compatibility with DROIDWAL.
iDuos 1.1
Added Swap Support.
Kernel Info Fix.
iDuos 1.2
Added EXT2/EXT3 & EXT4/JBD2 support.
Added NTFS File System (not tested .........)
Added IO Scheduler. {Deadline, CFQ, noop (Default)}.
Added CPU Governor Feature. { Conservative, Ondemand, Userspace,Powersave, performance, bcm21553 (Default) }
Other Patch for Performance
iDuos 1.3
init.d Problem Fixed
iDuos 1.3.1
Some Bug Fixed
GOV Problem Fixed
Click to expand...
Click to collapse
Click to expand...
Click to collapse
DOWNLOAD​
Download Odin Package
Download Only Boot.img {Flash it Using KernelFlasherv2(By My Friend Millan.SIS)}
USE IT AT YOUR OUWN RISK IT'S WORKS AND CONFIRMED FROM ALL TESTERS BUT ... ​
Don'T Forget To Say Thanks​
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Reserved For Later.
Reserved For Later.
Reserved For Later. ROM
Reserved For Later. ROM
Reserved For Later.
Reserved For Later.
Sorry For One More..............
thanks for this !
Kernel from a 6102 user will be more stable..
i'll now focus only on rom dev..
Can i use this kernel with techno duos
Sent from my GT-S6102 using Tapatalk 2
yes
dr.manoj_n said:
Can i use this kernel with techno duos
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
yes friend ............ u can use iDUOS kernel With TD...
BTW : my Device is now iDUOS + TD
Thanks... For the Custom Kernel
dr.manoj_n said:
Can i use this kernel with techno duos
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
Same Question for Me...
Can i Use these kernel with TD 1.1 from Milan.SIS
Also I'll waiting for "Coming Soon Features:"
Thanks...
May God Bless U Both...
MNgez said:
Same Question for Me...
Can i Use these kernel with TD 1.1 from Milan.SIS
Also I'll waiting for "Coming Soon Features:"
Thanks...
May God Bless U Both...
Click to expand...
Click to collapse
yes friend ...... u can also use with DT1.0 /1.1/1.5/stock
Sent from my GT-S6102 using Tapatalk 2
Thanks friend! Downloading..
Sent from my GT-S6102 using xda premium
Usin with td1.1
Working fine. Thanks
Sent from my GT-S6102 using Tapatalk 2
dr.manoj_n said:
Usin with td1.1
Working fine. Thanks
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
plz check droidwall or avasti firewall ......
Sent from my GT-S6102 using Tapatalk 2
Allready checked droidwall working well.
Sent from my GT-S6102 using Tapatalk 2
manoranjan2050 said:
plz check droidwall or avasti firewall ......
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
Nice work buddy!! Can you provide me with the latest firmware for this phone?? or the /system folder would be good!
i am using TD 1.1 and this kernel bricked my duos. twice.
at first it was fine but some time after startup my duos got freeze.
can't do a thing and all i can do is remove the battery and wait some time then reinsert it then boot.
the 2nd boot it was smooth until some time it freezes again. this time it shuts down by itself.
fortunately i have backed up by cwm so i revert back to my previous (stock) kernel
FYI: TD kernel doesn't work on me too, i get trouble when installing from google play, it restarts by itself.
thanks for your attention
freakwithy said:
Nice work buddy!! Can you provide me with the latest firmware for this phone?? or the /system folder would be good!
Click to expand...
Click to collapse
Thanks For Testing Info..........
Latest Firmware Hare .......Also Check My Sig.....
http://forum.xda-developers.com/showthread.php?t=1656825
What is ur Build No.... Check it (Type *#1234*)
zereon said:
i am using TD 1.1 and this kernel bricked my duos. twice.
at first it was fine but some time after startup my duos got freeze.
can't do a thing and all i can do is remove the battery and wait some time then reinsert it then boot.
the 2nd boot it was smooth until some time it freezes again. this time it shuts down by itself.
fortunately i have backed up by cwm so i revert back to my previous (stock) kernel
FYI: TD kernel doesn't work on me too, i get trouble when installing from google play, it restarts by itself.
thanks for your attention
Click to expand...
Click to collapse
may be somthing worng .... reflash and try agn.............
Duos works great
Flased IDUOS with kernelflasherV2, works great. It/s faster and smoothier than stock kernel or than stock duos kernel. Will report on stability, still testing. Congrats!
you finally release it...congrats dude
Ey man, great kernel, now the apps that previously have a crash, take less time to show any notice of crashed, has been greatly reduced. Thanks.

[i9001]Is it possible to lower vibrations' sensitivity?

Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?
Magic Stick said:
Hey, I just wanted to ask is it possible to lower the vibrations? Since I moved to ICS/JB i just can' t get used to it. In 2.3 roms they were much lower or i even could set them in settings.
So, is it possible to lower vibrations on JB?
Click to expand...
Click to collapse
I think the kernel semaphore has that option
Alexis0o said:
I think the kernel semaphore has that option
Click to expand...
Click to collapse
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device
Magic Stick said:
Thanks for reply, but as u can see from thread name, i do not own i9000, i have i9001 so this kernel would brick my device
Click to expand...
Click to collapse
Ops im sorry, i didn't see this..
What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium
Hr Kristian said:
What rom are you on? CM has vibration settings in system settings
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I' m using unofficial port of CM10 by ivendor, and looking in settings --> system i don' t see vibrations option.
If your kernel have a kernel manager, like:
Devil kernel - devil kernel manager
Semaphore - semaphore manager
You can look at your's if your kernel have one, google it
Sent from my GT-I9000 using xda premium
Under "about phone" you can see your kernel info, the stock CM10 kernel allows vibration control, and the setting is located in system settings somewhere, so you'll have to check your kernel, and then if the one you have isn't the stock, if it has a management app.
Sent from my GT-I9000 using xda premium

[Q] CyanogenMod 9 RC (Build 2) and gt-i9001

I just installed CyanogenMod 9 RC (Build 2) by arco68 on my samsung galaxy S+
and all is fine except when i try to reboot from the reboot menu (in normal reboot or in download mode or in recovery). When i try this the phone reboot but blocks at the samsung logo and never go ahead. I have to switch off the phone by pressing the power button a long time and after the switch it on.
I have also another question about kernel. I have to uodate the kernel separately from the ROM and if yes which on to choose ?
Thanks
Eric
tanguy44 said:
I just installed CyanogenMod 9 RC (Build 2) by arco68 on my samsung galaxy S+
and all is fine except when i try to reboot from the reboot menu (in normal reboot or in download mode or in recovery). When i try this the phone reboot but blocks at the samsung logo and never go ahead. I have to switch off the phone by pressing the power button a long time and after the switch it on.
I have also another question about kernel. I have to uodate the kernel separately from the ROM and if yes which on to choose ?
Thanks
Eric
Click to expand...
Click to collapse
I only can help you with the second question
Yes you have to update only kernel if you want to switch to another one
If you want a 2.6 kernel try the CastagnaIT 7.4 CFS extreme UV kernel and if you want 3.0 kernel you could try the one by jaggyjags but its a bit laggy. Its in the jaggyjags kernel thread in the attachments
Hope i helped
About first question, deactivated touch sound and dial pad sound from settings => sounds. And try, that should help you.
Thanks now it works fine. Is it a bug?
Sent from my GT-I9001 using xda app-developers app
tanguy44 said:
Thanks now it works fine. Is it a bug?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
yes, but its a bug in every cm9 rom
Sent from my GT-I9001 using xda premium
Jonboy2011 said:
yes, but its a bug in every cm9 rom
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Thanks
In this ROM is the radio tuner supported and if yes why there is no native soft to use it ? Which one i have to use ?
Eric
tanguy44 said:
Thanks
In this ROM is the radio tuner supported and if yes why there is no native soft to use it ? Which one i have to use ?
Eric
Click to expand...
Click to collapse
This is the comment from another cm9 thread, this applies for Arco's cm9 as well:
FM radio (you can use Spirit FM Free with Audio->Method = "qdsp5v2 Altern", there isn't an FM Radio app in CM9)
Verstuurd van mijn GT-I9001

I9000 cm10.1 with speed kernel:?

Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Zahovay said:
Hello guys.
I am about to use cm10.1. I would like to make my phone faster but overclock is rebooting my phone too often, also it gets hot really easily. Is there anything 'speed kernel compatible with cm10 / up ?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Overclock
quack75 said:
Semaphore kernel is compatible and fast
however, you have to play with the governors and scheduler to change speed without overclocking (also in stock kernel)
look your best configuration
Click to expand...
Click to collapse
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Zahovay said:
Could u give me a link about a thread that includes the kernel and the way how to set it up? I haven't done kernel change for ages..
And amm.. I don't mind overclocking but if I have to, I need one that does not reboot every 3rd minute...
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
quack75 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1786220
and a tread for the app to manage the kernel ( is in a play store)
http://forum.xda-developers.com/showthread.php?t=1886686
Click to expand...
Click to collapse
I have to flash the kernel right after the flashed rom?
Zahovay said:
I have to flash the kernel right after the flashed rom?
Click to expand...
Click to collapse
yes

Categories

Resources