Database Develop

[Q] What ROM is the best for X8?

Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!

Luescoff said:
Hi everyone!
I would like to know which one of the ROMS for X8 is the best in performance for dailly tasks. Because i have tested 3 ROMs and none of have good battery perfomance on a daily basis.
What ROM should I try? Thanks for all your answers. Take care!
Click to expand...
Click to collapse
I find gdx v20 best for day 2 day use
Sent from my MOLEY_X8 using xda premium

for me..
and hightly recomment is GingerDX v20
and when you know after reading thread by thread you can match with kernel
linuxDX, or Alfs kernel, or nAa kernel...
it can simply make your device faster and smootherst
but beware if you new on kernel
(make sure your know what are U doing when playing with kernel and unlock bootloader)
because it can brick you phone!
and then I sure after this you will screaming here and asking how to save your bricked phone!!
here the answer use SEUS

gingerdxv20 for sure

ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?

tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
what apps that keep crash on ur droid?? i had no problem at all with gingerdxv20 rom..

tohno said:
ginger x20 keeps on crashing my apps non stop why?? downloaded 10 apps and 6 of them crashed and had to install again..is this normal?
Click to expand...
Click to collapse
U have to follow installation properly
make sure install GDX with CWM instead Xrecovery
and fullwipe..
or maybe your device 'special' same like my friend phone
(when I flashing GDX 20 and GDX v19 on his phone)
I found this problem = sdcard no show
but when in recovery = all files and folder prety there
and I have no idea why....

Gx with custom kernal no lag 8 day use
Sent from my E15a using XDA App

CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?

No you need tap on the screen,also you need to have installed.
Sent from my XPERIA X8 using Tapatalk

froyopro incase of daily tasks and battery performance

for me gingerdx v20 is the best rom for x8 super fast and no lag

tohno said:
CWM? whats that?? i only had xrevocery no CWM ..is it like xrecovery where u click back when you see SE ?
Click to expand...
Click to collapse
when u reboot..
press volume down key or/and tap screen (when u see SE white logo)
u'll see CWM recovery and install GDX by this way
or if u can get into CWM th8 mean U don't have CWM
so install dual recovery.zip first (u can use search button)
or install other rom which one have dual recovery pre install
sorry long explaination
and hit thanks button twice!

thanks! (thanked already )
so in summary ...
open xrecovery and find CWM
if CWM is missing then go donwload it...
is cwm same with xrecovery?or is it and extension?
then use cwm and install the mod instead of xrecovery (do i need to system wipe?)
reboot phone then done?
hmmm just wondering will my link2sd apps will stay?
does it have anything to do with busybox? according to dotsen i must not update busybox

Need Clean Gingerbread rom for X8/W8

I really need clean gingerbread rom... there anyone can help me??
not the modded one... no special setting or anything new... just clean one...

the best GB roms for me are MiniCM7 and GingerDX, you need to try them both and then choose the better one somebody likes MiniCM, somebody likes GingerDX

fifo171 said:
the best GB roms for me are MiniCM7 and GingerDX, you need to try them both and then choose the better one somebody likes MiniCM, somebody likes GingerDX
Click to expand...
Click to collapse
About Minicm7, sadly I cant unlock my BT... because mine is 12v07... About GDX, I already type that I need the clean one no special setting or anything mod... Just clean one...

what do you mean by "special setting"?

Then go for PrimeHD , clean CM7 Rom.
Sent from my X8 running nAa and D_d piece of art called MiniCM9.

Clean ROM = PrimeHD

fifo171 said:
what do you mean by "special setting"?
Click to expand...
Click to collapse
by clean it is no gdx setting in cyanogenmod setting...

CosminAdriaan said:
Then go for PrimeHD , clean CM7 Rom.
Sent from my X8 running nAa and D_d piece of art called MiniCM9.
Click to expand...
Click to collapse
Godra said:
Clean ROM = PrimeHD
Click to expand...
Click to collapse
about this primehd, it has a problem with radio...

what about this? it should be cleaner than PrimeHD (PrimeHD has gingerDX settings), but the radio doesn't work too. but if you don't use radio, it shouldn't be a problem

fifo171 said:
what about this? it should be cleaner than PrimeHD (PrimeHD has gingerDX settings), but the radio doesn't work too. but if you don't use radio, it shouldn't be a problem
Click to expand...
Click to collapse
Only PrimeHD 7.0 had GDX settings because it was based on GDX. Last one (8.0) doesnt have it.

Godra said:
Only PrimeHD 7.0 had GDX settings because it was based on GDX. Last one (8.0) doesnt have it.
Click to expand...
Click to collapse
oh, i didn't know this

fifo171 said:
oh, i didn't know this
Click to expand...
Click to collapse
But thats on Alfs version. Stock version still may have it, not sure, I have never tried it.

On stock no more GDX settings in 8.0... but the radio still don't work..:/

Install GDX and remove things you do not need by any root browser
GDX v22 is open to mod so DIY
Hope this helps

fifo171 said:
what about this? it should be cleaner than PrimeHD (PrimeHD has gingerDX settings), but the radio doesn't work too. but if you don't use radio, it shouldn't be a problem
Click to expand...
Click to collapse
I really need radio...

Copy the Radio.apk from GingerDX and use the rest of the ROM of PrimeHD then.

tahsin.arnob said:
Copy the Radio.apk from GingerDX and use the rest of the ROM of PrimeHD then.
Click to expand...
Click to collapse
ha3.. already try that before make this thread but cant open it FC..

You should try minicm7 2.0.7 you dont need to unlock bootloader, im using it and it is clean

BB00mLD said:
You should try minicm7 2.0.7 you dont need to unlock bootloader, im using it and it is clean
Click to expand...
Click to collapse
can u share the links....

BohArie said:
ha3.. already try that before make this thread but cant open it FC..
Click to expand...
Click to collapse
Try the miniCM7 radio.apk !

[Q] GingerDX v029 Bugs..

Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC

ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
tell me why i shouldnt report this thread

fotak-x said:
tell me why i shouldnt report this thread
Click to expand...
Click to collapse
Cause i need help and my Xperia X8 is stucking all the time , you cant handle or must wait 1min fpr one click-.-"

ProSafe38 said:
Cause i need help and my Xperia X8 is stucking all the time , you cant handle or must wait 1min fpr one click-.-"
Click to expand...
Click to collapse
there is GDX bug report thread and GDX dev thread you should post there Do you think i should report it because you are not only one with GDX v29 problems
overclock it or swap

fotak-x said:
there is GDX bug report thread and GDX dev thread you should post there Do you think i should report it because you are not only one with GDX v29 problems
Click to expand...
Click to collapse
and why so mean ? Cant you say normal ?
Iam a newbie is this forbidden ? -.-"

ProSafe38 said:
and why so mean ? Cant you say normal ?
Iam a newbie is this forbidden ? -.-"
Click to expand...
Click to collapse
nope its not forbidden just read rules and im sorry for being mean :angel:

ProSafe38 said:
Hi all
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
Yes, I have this bugs too. Additionaly, CWM is in 4 version - in GDXv28b was CWM 5 and it was better.
I have FC in all apps, so I can't use this ROM.
My X8 is in Stock Kernel - what about others?
Edit: In 2nd version GDXv29 for Stock Rom works so much better, but Settings app is old.

michal95 said:
Yes, I have this bugs too. Additionaly, CWM is in 4 version - in GDXv28b was CWM 5 and it was better.
I have FC in all apps, so I can't use this ROM.
My X8 is in Stock Kernel - what about others?
Click to expand...
Click to collapse
Hi , This is a known issue for stock kernel.
Even I am on stock kernel.
Try downloading and flashing the last beta build which eagleeyetom has uploaded,
Check the first page of GingerDx thread.
GingerDx beta build for stock works awesome on my X8

ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
I dont have any of this problems
Sent from my X8 using xda premium

Wifi Problem
I have flashed Gingerdx v29 with nAa kernel and everytime i try to connect to wifi settings fc

Mayank77 said:
Try downloading and flashing the last beta build which eagleeyetom has uploaded,
(...)
GingerDx beta build for stock works awesome on my X8
Click to expand...
Click to collapse
Is it beta version? It works very good, stable and smooth now - v2 of GDXv029

yhui07 said:
I have flashed Gingerdx v29 with nAa kernel and everytime i try to connect to wifi settings fc
Click to expand...
Click to collapse
Did you wipe dalvik cache & cache?

I can't find the page of download for stock kernel, I tryed the one on the official page but it's full of bug... the rom can't recognize the ext2 partition of sd card to increase the internal storage! can anyone help me? any link?

Dede525 said:
I can't find the page of download for stock kernel, I tryed the one on the official page but it's full of bug... the rom can't recognize the ext2 partition of sd card to increase the internal storage! can anyone help me? any link?
Click to expand...
Click to collapse
just repair it with PCC and you will be on stock rom and kernel

fotak-x said:
just repair it with PCC and you will be on stock rom and kernel
Click to expand...
Click to collapse
no bro, maybe I have not explained well ... I downloaded the rom GDX v29 for the stock kernel, but is unable to recognize the ext2 partition of the SD card (which increase the internal memory), it is a bug heavy for me, because I many app installed, does anyone know how to solve this problem or know why I have it?

no wifi on alfs8a
hi all.. i have alfs v8a, and ginger dx v28b, working great with an average antutu score of about 1940 when overclocked to 748.
i downloaded and installed ginger dx v29 and it is great, nice look, nice feel and all.
i got good signal, feels smooth, bluetooth is good and overall its great.
however, i have the same issues with most who are using this rom.
i did not notice the auto brightness if it is working, have not confirmed it yet for myself coz i only got the rom about an hour.
and the biggest issue is that wifi is not working. i dont know what i did wrong but i think i did evrythng ryt, i already flashed the libsensorspatch and still, wifi says error when turning it on.
i will attach a screenshot from my about phone so you guys can check if i have the right kernel for this.
as i saw this post from the dev section:
Originally Posted by burnoutslo View Post
To everyone whose WiFi isn't working. The point is that you use normal Alfs kernel, not the Alfs GDX kernel, because the new version uses different driver!
This ones are ok:
X8_v08a-cm7_Alfs&djnilse.zip
X8_v9-cm7_Alfs&djnilse.zip
X8_09a-cm7_Alfs&Djnilse.rar
This ones are NOT ok:
X8_08-GDX_Alfs&Djnils.rar
X8_09a-GDX_Alfs&Djnilse.rar
i just wanna make sure if im using the right kernel or not because i really dont want to have the kernel changed if i have other options

ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
I have installed GDX v29 on stock kernel and i have no bugs except that when i have activated oc module it works aparently but decreases performance a little (i.e. without oc module v004 at 600 mhz antutu benchmark scores are 1656, but with oc module v004 at 748 1550-1640), this is a bug?
Sorry for my bad English

Dede525 said:
no bro, maybe I have not explained well ... I downloaded the rom GDX v29 for the stock kernel, but is unable to recognize the ext2 partition of the SD card (which increase the internal memory), it is a bug heavy for me, because I many app installed, does anyone know how to solve this problem or know why I have it?
Click to expand...
Click to collapse
I have the same problem, and i think that the error is on /system/etc/init.d/10app2sd the script doesn't work on stock kernel.
Solution: I changed it to the 10app2sd GDX v28b version and now a2sd works correctly.

dsolis87 said:
I have the same problem, and i think that the error is on /system/etc/init.d/10app2sd the script doesn't work on stock kernel.
Solution: I changed it to the 10app2sd GDX v28b version and now a2sd works correctly.
Click to expand...
Click to collapse
thank U a lot man! i'll try it soon! you should post it on the page of GDX v29...

phone stuck at boot screen,dead sd card after flashing gingerdx v029

[Q] Help with GingerDX v29

Hello there, i have a problem with gingerDx v29, im using v28 atm with alfs v09a, so far so good, but when i instal v29 i get a com.android.phone error as soon as i put the ping and then the error keeps looping. i tryed re-instal, wipe data, (wipe everything that i could with CMW actualy) but it still doesnt work, i read the forum in order to find an answer but didnt find it with this SO, (also tryed a solution that seams to work in others so like fix permisions). How do i solve this?
I really hate to bother but its been 5 days and i can make it work.
Thanks in advance!

i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.

update Ginger DX v29
Hello i am a new user asking about the update of DX v29. i recently purchased X8 having
Configuration .
Model no E15i ,
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .

it worked!
playjun said:
i think your kernel is alfs gdx.try to use alfs 8a / 9a for cm7.
Click to expand...
Click to collapse
thanks man, that was the problem, i cant belive i didnt saw that, thanks a lot
And for the guy asking a guide this is what i did:
download the alfs v09a kernel right in the rom page
download the rom
download the libsensor patch
download the addon
put the rom, the libsensor patch and the addon in ur sd card
flash the kernel
start in cwm
go to instal zip option, instal the rom, the libsensor and the addon
restart
enjoy
i just did it and its working fine but im finding a strange bug though, my screen seams to be moving a little bit to the left everytime :X
when i fix it i let you know how xD
Thanks again to playjun _o_

(Q) overclock in GingerDX V29 dont work?
Hi, I was trying to place GingerDX v29 overclock and does not work, any suggestions?
sorry my english,

problem
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail

Answer
terrordroid said:
Hello i am brand new to this forum and i have an x8 i rooted it via x8toolbox and i installed xrecovery via x8toolbox tried to install ginger cruzt but i bricked it and thx to xda i unbricked it, i rooted and installed xrecovery again so i can install gingerdx now but i cant open xrecovery now i follow the guides and averything but i always fail
Click to expand...
Click to collapse
open it by touching the screen on the Sony Ericsson logo.

GingerDX v029 version selection help
First of all thanx to all
by reading a lot of stuff in this forum .successfully root the phone and install xrecovery and its working .
but i have some confusion about the
[
1 .GingerDX-v029-shakira-stock.zip GingerDX v029 nAa/alfs
2. GingerDX-v029-robyn.zip GingerDX v029 for robyn
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
The confusion is which one is for my xperia X8 .
Please help me for this My xperia configuration is
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.
I request to all please guide me to for an update .

Hey man... ur x8 also knwn as shakira... use that rom
Sent from my X8 using xda app-developers app

stone009 said:
3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2
Click to expand...
Click to collapse
get the number 3 (i think your still in lock bootloader) and dont forget the addons.and read the standard procedure.goodluck
sent from my x8™ using gingerDX®

The diferent versions are for diferent kernels, for example im using Alfs kernel so i instal the number 1, i think u still using stock kernel so instal the stock one, the number 3
if you have any problems you can allways find the default rom and flash it back or try another one
Good luck

need help
(3. GingerDX-v029-shakira-stock.zip GingerDX v029 stock v2 is for my x8 .
do i need the update Kernel version ?
or its work on my original configuration as below
My xperia X8 configuration is
Rooted by Superoneclick.
Model no E15i , 11W22
Firmware 2.1 ,
Baseband M76xx-----------------15.,
Kernel version 2.629 [email protected]#1,
Build 2.1.1.A.0.6.

get that number 3
and addon( standard settings for stock and superuser ) and read some fix in the thread...
opps your on 11w22?
read a bit about unlocking bootloader.
sent from my x8™ using gingerDX®

alfs v9a
im having a little screen moving problem, i think its the kernel alfs v9a, i'll try v8 and let you know
Edit; Alfs v8a solves the problem

Hey guys i'm having the same problem with the screen moving bug, it moves to the right a little bit. I tried alfs v8 and it solved the problem but I still don't think it's the best answer since the combo gdx v29 and alfs v8 has A LOT of battery drain on 3g and sync on (in 8 hours it drains 90 percent of the battery just in standby).
Is there any other thing I can do to fix this screen problem? If not i'll just go back to stock kernel

Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app

cascabel said:
Afaik alfsv9 has that bug. Try oc'ing above 690 and use on demand.
Sent from my rooted tomato using xda app
Click to expand...
Click to collapse
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.

Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Sorry. I meant 691.
Sent from my rooted tomato using xda app

Destroseitor said:
Hey thanks for answering, I'm on demand right now, and the cpu is set to 122 mhz min and 691 mhz max (basically I didn't change anything). Any other ideas?
Pretty weird bug I hope there's a good fix for this, cos alfs v9+ is the kernel with the best performance I've tested so far.
Click to expand...
Click to collapse
Try other frequencies
Sent from my X8 using xda premium

Help Choosing Custom Rom

Hi, for the first time I'm planning to install a custom rom so infact I'm doing this only because of native app2sd support:fingers-crossed: but to be honest I want a full compatible custom rom which should support and run most applications from market and performance should be good just like the stock 2.1 if not better... and if possible then camera and all other major functions should be working in it without any bugs.
That's all I ask .. currently I'm thinking about :
cyanogenmod
GingerDX
GingerZaraki
but I don't know which one is better Don't really want to unlock bootloader / kernels unless really necessary..
Thanks in advance.

orangzeb said:
Hi, for the first time I'm planning to install a custom rom so infact I'm doing this only because of native app2sd support:fingers-crossed: but to be honest I want a full compatible custom rom which should support and run most applications from market and performance should be good just like the stock 2.1 if not better... and if possible then camera and all other major functions should be working in it without any bugs.
That's all I ask .. currently I'm thinking about :
cyanogenmod
GingerDX
GingerZaraki
but I don't know which one is better Don't really want to unlock bootloader / kernels unless really necessary..
Thanks in advance.
Click to expand...
Click to collapse
Unlocking bootloader & installing a custom kernel is highly recommended ( if u don't know how to unlock & required build date DON'T TRY IT)
Best rom for stock is Gingerdx (my opinion) very stable, smooth.
Camera, etc works fine & without bugs.
Native app2sd is also supported
Sent From My Black DRAGON

orangzeb said:
Hi, for the first time I'm planning to install a custom rom so infact I'm doing this only because of native app2sd support:fingers-crossed: but to be honest I want a full compatible custom rom which should support and run most applications from market and performance should be good just like the stock 2.1 if not better... and if possible then camera and all other major functions should be working in it without any bugs.
That's all I ask .. currently I'm thinking about :
cyanogenmod
GingerDX
GingerZaraki
but I don't know which one is better Don't really want to unlock bootloader / kernels unless really necessary..
Thanks in advance.
Click to expand...
Click to collapse
Gingerdx stock kernel
Easiest to install...
But if u unlock bootloader performance will definetly increase
BTW what's ur phone's manufacturing date(remove battery & see)
sent from my W8 using xda app(paid/free doesn't matter)

Hi thanks for answering both of you.. it says : cb5 10w36 , if unlocking bootloader is highly recommended then I think I might try that but with a full guide. then what rom would you recommend ?
edit : i'm gonna follow this guide for now to unlock my bootloader with stock 2.1 x8 2.1.1.C.0.0 , is it safe ?
okay I successfuly unlocked bootloader I think co'z in status it says "r"
now what ? which kernel do you guys recommend and which custom rom ?

orangzeb said:
Hi thanks for answering both of you.. it says : cb5 10w36 , if unlocking bootloader is highly recommended then I think I might try that but with a full guide. then what rom would you recommend ?
edit : i'm gonna follow this guide for now to unlock my bootloader with stock 2.1 x8 2.1.1.C.0.0 , is it safe ?
okay I successfuly unlocked bootloader I think co'z in status it says "r"
now what ? which kernel do you guys recommend and which custom rom ?
Click to expand...
Click to collapse
Congratulations!
I recommend u nAa-14-gb for shakira + iXperia 8s v1.9.0 rom!
------Best performance for gaming(no lags on sixguns !)
------no radio (bug)
------ios interface
If u don't like iXperia try minicm7
Sent From My Black DRAGON

Thanks alot for replying mate but my main focus is not gaming but I see what you mean there... I hate iphone graphics but I like Minicm7 I think I'll stick to it but for now I'm leaving this thread for more replies so I could decide something tomorrow. I kinda like vista / aero graphics , will minicm7 support such themes?
edit : after alot of reading here , I'm stuck with minimc7 or gingerdx 0.29 ? plz help me choose.

orangzeb said:
Thanks alot for replying mate but my main focus is not gaming but I see what you mean there... I hate iphone graphics but I like Minicm7 I think I'll stick to it but for now I'm leaving this thread for more replies so I could decide something tomorrow. I kinda like vista / aero graphics , will minicm7 support such themes and what's the real difference between 7 and 10 ?
edit : after alot of reading here , I'm stuck with minimc7,latest or gingerdx latest ?
Click to expand...
Click to collapse
I think gingerdx for NAa kernel will be great
BTW which Android version you need? Roms are based on them (froyo,gingerbread, ICS,Jelly bean)
sent from my W8 using xda app(paid/free doesn't matter)
---------- Post added at 01:07 AM ---------- Previous post was at 01:03 AM ----------
saurabh singhal said:
I think gingerdx for NAa kernel will be great
BTW which Android version you need? Roms are based on them (froyo,gingerbread, ICS,Jelly bean)
sent from my W8 using xda app(paid/free doesn't matter)
Click to expand...
Click to collapse
& when someone replies you don't forget to hit thanks button don't be lazy
sent from my W8 using xda app(paid/free doesn't matter)

I don't care about android version that much as long as it is bug free , stable, fast, compatible and graphically appealing...
& when someone replies you don't forget to hit thanks button don't be lazy
Click to expand...
Click to collapse
I always try to hit that man.

orangzeb said:
I don't care about android version that much as long as it is bug free , stable, fast, compatible and graphically appealing...
I always try to hit that man.
Click to expand...
Click to collapse
Then GingerDX for nAa kernel is best...
sent from my W8 using xda app(paid/free doesn't matter)

okay I'm going for DGX0.29 + nAa kernel , just installed clockwork recovery from xda, now should I install the kernel first or the rom ?

orangzeb said:
okay I'm going for DGX0.29 + nAa kernel , just installed clockwork recovery from xda, now should I install the kernel first or the rom ?
Click to expand...
Click to collapse
No need to install recovery if u are flashing kernel......
It's present in the kernel..
sent from my W8 using xda app(paid/free doesn't matter)

lolz, I didn't know that, I think GDX0.29 contains nAa kernel ? if not should I install the kernel first or the rom ?

orangzeb said:
lolz, I didn't know that, I think GDX0.29 contains nAa kernel ? if not should I install the kernel first or the rom ?
Click to expand...
Click to collapse
First kernel ..
& wait(if you can) gdx v030 is coming soon...
sent from my W8 using xda app(paid/free doesn't matter)

hmmm okay I think I should wait then as currently I have a 2 gb class 4 sd card planning to buy a 16 gb class 6 or better card next month. thanks mate.

orangzeb said:
hmmm okay I think I should wait then as currently I have a 2 gb class 4 sd card planning to buy a 16 gb class 6 or better card next month. thanks mate.
Click to expand...
Click to collapse
You just have to press it no need to say it
sent from my W8 using xda app(paid/free doesn't matter)