hi frnd i own a Xperia Neo V but here i am for my frnd he has did something wrong with his phone and its not booting up i can enter recovery/download mode i just want to knwo how to flash i9000
i have downloaded
Flashprogram Samsung I9000 + Pits
firmware version XAJW5_XEU from samfirmware
i have flashed 5830 and 5801 but i dont find odin to be similar as them
can any1 tell me how to flash i9000 and what pit to use cause i can see 3 pits in it
803
513
512
or a full procedure will be helpful
am just trying to help my frnd to fix his S1
you will need to have the galaxy S drivers installed on the computer they can be downloaded and installed as part of Kies or seperatly from a thread in the I9000 (SGS) section of XDA just search for "Samsung Drivers.exe"
As for flashing Phone put it into download mode and connect USB cable
If the file downloaded is a single file .TAR place into PDA of odin
if 3 file place PDA into PDA, CSC into CSC and PHONE into PHONE and flash.
Most GingerBread ROMs use 512 PIT check on samfirmware as to the suggested PIT file.
NOTE a pit file is not always required but cannot hurt. just ensure that repartition is not checked
what will happen if i re partition it.. will it format everything
imranaryan said:
what will happen if i re partition it.. will it format everything
Click to expand...
Click to collapse
re partition will fully wipe the OS partitions, not the SDcard partition but sometimes errors do occur with the SDcard.
The ROM on the phone does retain a copy of the PIT file and can access it during a odin flash.
it is very important to use the correct pit file for the rom or it will not boot
Related
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Can anyone help me?
Mabumap2k6 said:
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Click to expand...
Click to collapse
No need to use PIT file - put firmware file (DH19 etc) into PDA field
Dont change any options
If your Korean i suggest to check out - matpclub.com - korean smartphone community
I fixed my bricked phone using JP3 firmware from samfirmwares.com and the Korean Froyo 2.2 update (which I found in Google)and used Odin. I'm pretty sure its not supposed to work but it did for me and now I have Froyo on my Samsung Galaxy S Shw-m110s The only problem now is there are two boot screens. The Regular galaxy S boot up and the Korean one lol
brother u have any link for this phone ı have same phone korean galaxy
my shw m110s anycall
i flashed it by odin flasher it was dg24
i flashed it with dg23 firmware and then it field i dont know what to do
plz help me
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
No links to show PIT M110S
mhammadleo said:
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Click to expand...
Click to collapse
hi, i cant find any recovery zip and i cant find m110s.pit...
links not work.
it really works fine?
please, tell me at greater length how i need to do to fix my phone, thank you
sorry my english(
karabey said:
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
Click to expand...
Click to collapse
Hi mate link is not working please can u give me working link?
THANKS
Hello Guys
Well i have m110s 16 gig and it has ginberbread installed couple of weeks back i was copying files and it screwd my phone and since then it gives me an error that damage internal sd card. Guys ofcourse it's not hardware issue because i have seen the motherboard of m110s and thre is CHIP(rom) in there for storage and if i can flash my phone with different vertion of rom back and forth then it means the memory works just fine. I belive it could be problem with partion. because i can see only 98 mb of space which it allocates for cahe. I think possible solution could be stock Pit file or Bootloader or both of them. if i flash it with stock files i guess things would get ok.
But seriously guys it's annoying me now as i can just use it as phone and not smartphone.Can you guys help me out in this.
Thanks
Hi, I got the JPY ROM from the thread in the general discussion, and any time i have tried to flash it onto my phone, the phone refuses to start properly. It just vibrates a couple of times and black screens.
I am using Odin 1.3 and PIT 512 for this as it says on SamFirmware.com.
Is this the ROM not working properly, or me doing something wrong?
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
tackygr said:
Mate did you click repartition in odin?If you did then you SHOULDNT!!!!
Try to get in to recovery mod with the 3 button combo and make a factory reset if yo had NOT clicked repartition.
In case had HAD clicked repartition in Odin then i guess you ll have to download a foul stock firmware and flash it.Meaning a firmeare that has Modem and CSC files aswell and not only PDA file...
Click to expand...
Click to collapse
haha, thanks mate, i forgot to try that, i'll give it a go later.
topcat888 said:
I'm just about to flash XXJPY and I was just wondering, do I have to unroot 'before' flashing the single file (pda) XXJPY or can I leave it as is..?? Does it make any difference..??
Thanks
Click to expand...
Click to collapse
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
hi there same thing happened to me i updated this thru samsung kies im stock at black screen would factory reset make my phone work again? i need help please please please
dopeee said:
nah you dont need to have it rooted to flash JPY.
I believe the JPY file in the general forum is just an upgrade / high level package which is why you dont tick repartition. Usually look for posts by Richthofen- hes the dude who converts it to mid level packages so you can couple it with a CSC and modem.
Click to expand...
Click to collapse
I am already rooted so should I un-root before flashing or just leave it rooted..???
And also have SGS Battery Icon Mod installed, again does this have to be un-installed before flash or not..??
Can someone post a link to the right ROM that I can use to update using ODIN that will not result in existing data lost ? The one that I downloaded is a single tar file (Size - 298,890KB) that contains these files. If this is the right file, do i just specify the tar file in the PDA and uncheck repartition ?
modem.bin
param.lfs
zimage
cache.rfs
factoryfs.rfs
Hi,
Trying to unbrick my phone is driving my mind totally mad!
So far I have tried installing several CF roots with ODIN and tried to reflash the ROM with I9000XWJS3. All of them lead to no success, just a black screen and the phone vibrates every 10 seconds.
Trying to find information on this forum is easy.. but trying to put all those pieces of information together is somewhat impossible for me.
I am from the Netherlands and bought this SGS 2nd hand from someone who has rooted it. However I have no idea how that person has done that with which piece of software. I also have no idea what build number it currently has. However I do know there is no sim-lock, because the owner bought it from the KPN telecom provider and has no problems using a sim-card from T-mobile.
I am able to get into the download mode (3 button combo thingy) and Odin can successfully flash the ROM of my SGS.
Now what I need to know is which PIT, ROM, CSC, Modem files etc. I need to make this phone working again. Preferably I'd like to run it on Froyo 2.2.1 with Android market installed.
try downloading the firmwares from samfirmwares.com
http://forum.xda-developers.com/showthread.php?t=846913 download the firmware from here. preferably JM8 flash that thru odin with PIT and REPARTITION and that should do the trick. then you can flash over a new rom like JPY (2.2.1)
I've successfully unbricked my Galaxy with the 'Froyo ROM that does not brick' here - "h t t p://w w w.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html" (Can't post as actual link because I'm not allowed to yet, just copy and paste the bit between the speech marks into a new window and remove the spaces).
As per previous poster's instructions; flash through Odin as PDA with PIT and REPARTITION (Original instructions for this ROM said not to use repartition but that didn't work for me)
You should then be able to Odin flash any new rom you like, but when you do DON'T use REPARTITION or PIT, otherwise your phone will just get bricked again.
I feel that flashing the firmwares which needs partition is safer and better than those that isn't....for my case I prefer flashing JPU than JPY or JPX...it works every time I got my phone semi-bricked, hehe...
Hello,
Yesterday i had similar problem ater trying to flash Darky's resurrection edition.
After the boot i had a black screen just like you.
Here's how i finally unbricked:
Download
- PIT 803 file multiupload.com/6JX2LEUCTY
- I9000XWJS3 pakcage from samfirmware.com (european for my case), PIT803 version : hotfile.com/dl/100247999/301207f/I9000_XEN_I9000XWJS3.rar.html
(The pwd is samfirmware.com)
The package I9000 XEN I9000XWJS3 contains 3 file (which i think is the key, trying to repartition with only one PDA file seem to soft brick the phone)
In Odin, tick repartition, for PIT select the PIT 803 file
For PDA, choose I9000XWJS3-REV03-ALL-low-CL830616.tar.md5
For CSC, choose GT-I9000-CSC-XENJS3.tar.md5
For PHONE, choose MODEM_I9000XXJPY.tar.md5
After the flash, your phone will reboot in rescue, unplug it and do a wipe/factory reset, then reboot and you should be ok.
The goal was only to unbrick my phone, but i'm totally happy with this firmware for now, my phone is a lot faster than before, and i don't feel the need of a lagfix anymore!!
Please note that this is just my experience, and you should wait for more advanced users help.
I screwed up I know what I did wrong Bell Samsung Galaxy S is now stuck in a boot loop.
But I was had a moment was rushed and didn't write down current phone info.
I need to restore the phone where can I find the .pit file and factory image for this phone?
The phone is currently in Download Mode loaded in Odin awaiting files.
Samsung Galaxy S i9000-M
How do I know which file to get if I didn't check info before getting phone stuck in loop it's a Bell Mobility Samsung Galaxy S i9000M
UGKC1/UGKC1/BMCKC1/Sbl (MultiCSC): Download (143.5 MB) (
UGJL2/UGJL2/BMCJL2/Sbl (MultiCSC): Download (143.3 MB)
UGJK3/UGJK3/BMCJK3 (MultiCSC): Download (142.5 MB)
OK and now I see there is a 512/513 and 803 ipt file which of those would I use... anyone?
DJMic said:
OK and now I see there is a 512/513 and 803 ipt file which of those would I use... anyone?
Click to expand...
Click to collapse
you need 512 pit
flash KG3 in odin as pda, phone and csc
or you could flash JVR as your pda, and use the KG3 phone for your modem and KG3 as your CSC -- this would give you the correct csc, a gb modem and the most recent official samsung firmware, jvr as your pda file
if you are in a bootloop with odin but have download mode showing, no need to panic, I would not even worry about pit, just flash the jvr pda file with kg3 in phone and csc and tick auto boot -- the odin flash will repartition the sd card anyways.
Hello,
i got my hands on an old GT-I9000. The privious owner tried to root it, because when i turn it on it directly boots, without doing anything into CWM(3.0.0.5)
I guess that this CWM version muss be very buggy because it cant access any kind of partion on the device.
Even mounting an SD card is impossible!
What can i do in this case ?
ADB ? an push a new CWM version on it, if yes which version ?
Best regards
Razzor
No, it's not bricked. You have to repartition with a proper pit file from odin. I would flash the original firmware, all the three tar files (pda, phone, csc)+the pit. With the repartition option set to enabled.
pappt said:
No, it's not bricked. You have to repartition with a proper pit file from odin. I would flash the original firmware, all the three tar files (pda, phone, csc)+the pit. With the repartition option set to enabled.
Click to expand...
Click to collapse
I followed it here @ http://www.faq4mobiles.de/samsung-forum/110832-i9000xxjvt-downloadbereich-verfuegbar.html
As you mentioned pda, phone, csc+the pit with odin 3.10 worked really smooth.
Rooting with http://www.faq4mobiles.de/downloads.php?do=file&id=9527 this and odin only PDA option clicked on, nothing else!
After that, cleared all the cash, factory resten in CWM and freesh install of CM11
greets Razzor