Database Develop

can't overclock more then 748mhz using nAa11 nd custom rom xperience v4

Sent from my E15i using xda premium

oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate

More is not a good idea for daily use... You will get some lag in multitasking..
Best for daily use (to my point of view) is 122 / 729.. More my phone was very laggy sometimes..

how to overclock in the first place?
can someone please give me the link on how to do it??
thanks!

Bah,
Go on parameters > cyanogemmod > performance > CPU : select your frequencies, check overclock and keep on boot and reboot.
If you've got the good kernel (as naA), that's all

i'm using gingerdx v22 with stock kernal
and i can OC it To 787
but i prefer 748 or 768
it's just luck!
but 748 is good,isn't it? at least for me

You can try and play with various governors,i think some go higher....

Guys, in general, there are 2 kinds of X8 concerning hardware.
If you got lucky, then you can overclock your X8 up to 806.
On the other hand, if you are unlucky (like me), then you will NEVER be able to have a stable OC over 719. It is just a matter of hardware

i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android

wilbso said:
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
Click to expand...
Click to collapse
or no..for me it's the same..but i use alfs and i can go up to 768mhz..in nAa i only can 748mhz..
then OP, CHANGE KERNEL!

I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock

signashoes007 said:
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
Click to expand...
Click to collapse
Follow the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1020313) and then you will be able to overclock your X8, even without unlocked bootloader.

if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??

boisdulait said:
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
Click to expand...
Click to collapse
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Sent from my XPERIA X8 using xda premium

signashoes007 said:
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
Click to expand...
Click to collapse
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.

I can Oc to 691mhz only ....
guess am the most unlucky here... ;(

I can overclock to 729 mhz!!
After dat phone works like a charm!!
SONY ERICSSON XPERIA X8
ACHOTJAN SEMC DEBRAND ENGINE V1.0 FINAL
bootloader unlocked ;-)
nAa -11 kernel

NIMBAH said:
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Click to expand...
Click to collapse
Yes I saw.. I should have edited my post.. but thx

Triptamine said:
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
Click to expand...
Click to collapse
nice to hear that..thanks!
anyway, when I went from v22 to v23b, the x8oc.ko on the module folder has been deleted..so i guess(not really sure) that it would be deleted when you install another rom..
-gab-
earth android

Module-OC

Hello,
My phone -xperia x8 white e15i
Kernel - Stock
It don't matter what Rom I use I can only OC till 691 MHz at 710mhz my.phone freeze and reboot.
also I get reboot time to time on 691.
I heard that very x8 should atleast be stable at 710
my question is.
Do I get a higher stable frequency if I use a different module other than Dix's???
I came across a module which offers a higher frequency .... search for better overclock you will find the thread.....so will I get a higher frequency? ?? using the other module???
I USED THE SEARCH BUTTON BEFORE POSTING.
so don't yell at me. : )

Help
I'm not too sure about this one since I'm a part noob much like you but have you tried flashing a different kernel such as Alfs? linuxxd is really good but doesn't allow overclocking as I found out with the same problem as yourself Sorry I meant stock kernel doesn't allow overclocking ...
If I helped you please answer my question on a new thread I made

It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.

A custom kernel allows better overclocking most of the time. When I was on stock kernal the highest I could get to was 710Mhz before rebooting. With a custom kernel I can get to 787Mhz before rebooting.
Sent from my E15i using xda premium

@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????

Chris95X8 said:
It's up to your phone. Your processor can go till that frequency without freezing. Other X8s can go higher. It doesn't depend on the ROM or kernel.
Click to expand...
Click to collapse
dependent on yes. with stock kernel to kernel naa 691 Mhz 806 big diference

what about.a different module??? it can increase potential? ??

noobismyname said:
@guys above thanks for answering ...
but I still don't get the answer ....
anyways if I change my kernel then I will be changing the software part only .... so how can it increase my CPU potential .. ?????
Click to expand...
Click to collapse
You need to understand that the stock kernel is not designed for overclocking, it's only possible with modules for stock kernel.
You can try the other module but I doubt it'll be any improvement, if you want better overclocking you really should install a custom kernel.
Sent from my X8 using xda premium

[Q] KERNEL UPGRADE or OVERCLOCK?

How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..

if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman

derekgabs said:
How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..
Click to expand...
Click to collapse
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..

chepoz said:
if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman
Click to expand...
Click to collapse
Uhm.. can you please direct me to one of that threads.. and can you also please give steps? Uhm.. totally pardon me from my ignorance.. im still a newbie in overclock and kernels.

kitrax59 said:
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..
Click to expand...
Click to collapse
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..

derekgabs said:
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..
Click to expand...
Click to collapse
no problem.. just play more with the ROM, as what others say. hehe anyway, mebitek's build is speedy already even at default freq.. 710 is enough for me.. min of 245 or 122.. mine is stable at 787 max only.. higher freqs than 787, it reboots itself. Could be different on yours.. just remember, OCing too high will also cause faster battery drain..

ok.. thank you kitrax.. i'll try to play more with the frequency now that i understand what it is.. hehehe .. thank you..

[Kernel] Overclocked (Confirmed to be not working)

Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS

Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
I installed it...its very slow....I changed the governor and I/o then it worked....bt its booting too slow and boot animation is also very slow.....

Re: [Kernel] Overclocked (Need testers)
Great work !!!!!!!!!!!
Now we have a kernel with overclock function..
I will try this later......
sent from my gt-s5830i using xda premium

Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
according to the no frills stats both the frequencies are working fine....
on 936 mhz and governor smartass v2.+ cfq(io).i have a stable stock rom..but battery drains quiet fast..i think the higher frequencies are not undervolted.thanks for the kernel..it would be better if cm support is added..i have found many tutorials for app building..but never found some for kernel building..can u help me with some online stuff.??
edit:-headphones donot work with stock rom..music only work with speakers.

Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?

Re: [Kernel] Overclocked (Need testers)
Alucard1989pl said:
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Click to expand...
Click to collapse
I think your right 1.2 ghz not good for our phones
1 ghz is good for our phones.....
sent from my gt-s5830i using xda premium

Re: [Kernel] Overclocked (Need testers)
They should remove 1.2GHz overclock
Otherwise many noobs will blame u if the burn thier processor and ask u for money
Sent from my GT-S5830i using xda premium

Re: [Kernel] Overclocked (Need testers)
First of all let us confirm that...the overclock is really working or not.
Sent from GT S5830i from Broadcom Headquarters.

Odp: [Kernel] Overclocked (Need testers)
Downloading on my ace...
Sent from my X10Mini using xda app-developers app

Re: [Kernel] Overclocked (Need testers)
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......

Odp: [Kernel] Overclocked (Need testers)
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app

-HellRaiser- said:
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Click to expand...
Click to collapse
If it works on merruk kernel it has to work on this one too.No?
daxanh said:
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
No you don't need em to change frequencies.

Re: [Kernel] Overclocked (Need testers)
Styrke said:
If it works on merruk kernel it has to work on this one too.No?
No you don't need em to change frequencies.
Click to expand...
Click to collapse
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....

-HellRaiser- said:
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
Click to expand...
Click to collapse
Yes it's true I just installed SetCPU and none of the frequencies 416 936 1248 are shown.I tried adding 1500 and the is stable because its always running on 832mhz.
But I didn't understand why 416mhz didn't work did I messed sth ?

hi everyone
to my knowledge, the frequencies are selected by register, According to what we said at the time Rafael in his forum.
The only possibility was to examine some new devices with the chip bcm21553 having frequencies above 1Ghz
Not answer how i know that, i only readed in the rafael kernel section
have a nice day :victory:

overclock function not working

sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Yes dude we can read the title too.

sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Damn! My eyes! I can't see anything now >.< . . .

[Q] Overclocking

i am trying to overclock my bionic to 1200mhz or more. im running CM10.1 and when i go into cpu settings it just says max is 1000mhz and i cant mess with the minimum clock. ive tried setcpu and no luck. any help. is there a kernel i need or what? or is it even possible? Please let me know

ModestMouse1312 said:
i am trying to overclock my bionic to 1200mhz or more. im running CM10.1 and when i go into cpu settings it just says max is 1000mhz and i cant mess with the minimum clock. ive tried setcpu and no luck. any help. is there a kernel i need or what? or is it even possible? Please let me know
Click to expand...
Click to collapse
Right now you will need to install a Kernel that allows for OC on top of your current custom ROM. OC Kernels are marked with "OC" so that you can find them easily.

dragonstalker said:
Right now you will need to install a Kernel that allows for OC on top of your current custom ROM. OC Kernels are marked with "OC" so that you can find them easily.
Click to expand...
Click to collapse
I'm also running CM 10.1 on my bionic, where can I find a OC kernels? -Thanks

ske1555 said:
I'm also running CM 10.1 on my bionic, where can I find a OC kernels? -Thanks
Click to expand...
Click to collapse
you can overclock your device here http://www.droidrzr.com/index.php/topic/16813-kexec-code-kernel-42413/ i hope it runs good for you just flash in safestrap

Will look into this
Sent from my XT875 using xda app-developers app

This kernel is no longer being developed, so it does not incorporate any recent changes from the Cm builds.
Sent from my XT875 using Tapatalk 4 Beta

Blurry 2.5 has a oc kernel built in with it. 1.2gig. Has CPU sleeper an custom governers with it.. Only bad thing is its on 4.1.2 not 4.2.2. In my opinion I'd rather be on 4.2.2 then gain 200mhz