[Kernel] Overclocked (Confirmed to be not working) - Galaxy Ace S5830i General

Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS

Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
I installed it...its very slow....I changed the governor and I/o then it worked....bt its booting too slow and boot animation is also very slow.....

Re: [Kernel] Overclocked (Need testers)
Great work !!!!!!!!!!!
Now we have a kernel with overclock function..
I will try this later......
sent from my gt-s5830i using xda premium

Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
according to the no frills stats both the frequencies are working fine....
on 936 mhz and governor smartass v2.+ cfq(io).i have a stable stock rom..but battery drains quiet fast..i think the higher frequencies are not undervolted.thanks for the kernel..it would be better if cm support is added..i have found many tutorials for app building..but never found some for kernel building..can u help me with some online stuff.??
edit:-headphones donot work with stock rom..music only work with speakers.

Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?

Re: [Kernel] Overclocked (Need testers)
Alucard1989pl said:
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Click to expand...
Click to collapse
I think your right 1.2 ghz not good for our phones
1 ghz is good for our phones.....
sent from my gt-s5830i using xda premium

Re: [Kernel] Overclocked (Need testers)
They should remove 1.2GHz overclock
Otherwise many noobs will blame u if the burn thier processor and ask u for money
Sent from my GT-S5830i using xda premium

Re: [Kernel] Overclocked (Need testers)
First of all let us confirm that...the overclock is really working or not.
Sent from GT S5830i from Broadcom Headquarters.

Odp: [Kernel] Overclocked (Need testers)
Downloading on my ace...
Sent from my X10Mini using xda app-developers app

Re: [Kernel] Overclocked (Need testers)
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......

Odp: [Kernel] Overclocked (Need testers)
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app

-HellRaiser- said:
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Click to expand...
Click to collapse
If it works on merruk kernel it has to work on this one too.No?
daxanh said:
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
No you don't need em to change frequencies.

Re: [Kernel] Overclocked (Need testers)
Styrke said:
If it works on merruk kernel it has to work on this one too.No?
No you don't need em to change frequencies.
Click to expand...
Click to collapse
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....

-HellRaiser- said:
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
Click to expand...
Click to collapse
Yes it's true I just installed SetCPU and none of the frequencies 416 936 1248 are shown.I tried adding 1500 and the is stable because its always running on 832mhz.
But I didn't understand why 416mhz didn't work did I messed sth ?

hi everyone
to my knowledge, the frequencies are selected by register, According to what we said at the time Rafael in his forum.
The only possibility was to examine some new devices with the chip bcm21553 having frequencies above 1Ghz
Not answer how i know that, i only readed in the rafael kernel section
have a nice day :victory:

overclock function not working

sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Yes dude we can read the title too.

sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Damn! My eyes! I can't see anything now >.< . . .

Related

New Kernel For Gingercruzt V2(sonygen) (nims11) with All feature and OC 883Mhz

first, dont forget to give a thanks to nims11, because of him, i can publish this kernel
this kernel MAYBE only work for [ROM]Gingercruzt V2(sonygen)[Update8/11/2011]
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (883Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?05d2zri7b8a7pye <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 806 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 883Mhz
for reference about Governor and I/O scheduler
thanks to knzo
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
If you try on other rom, just please report if work
i will update feature if i can
FOR GALAXY ACE GT-S5830B ( Brazillian User ) Thanks to traduz
go to this post
OC kernel for GT-S5830B ( Brazillian User )
It will work with all cm7 roms for ace
nims11 said:
It will work with all cm7 roms for ace
Click to expand...
Click to collapse
Thanks buddy,
works for me using grif's cm, thanks people
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
^Deadly_Sin^ said:
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
Click to expand...
Click to collapse
if get unstable , please set max 806 Mhz again, enjoy
Click to expand...
Click to collapse
...................................
EmoBoiix3 said:
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I dont understand what are you talking about ??
sorry for my english
denzel09 said:
...................................
Click to expand...
Click to collapse
Yeah i know, i just posted my personal experience. works ok for me at 844 without any problems. thanks anyway for taking time to reply
Too cool for school!
Sent from my GT-S5830 using XDA App
Using gingercruzt v2 without latest update @883 stable for now viewing youtube videos, angry birds, camera working... dont ask about governors, they are to many now loool...
Good work
Edit: First reboot 30 min after flashing kernel
ti is a stable version???
---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------
<witch is the best governor for powersave and for performence
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
downloadonlyaccount said:
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
Click to expand...
Click to collapse
please read link on the page one, from knzo
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
No, thats bug came from cm7 rom, not the kernel
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
Good choice not implement this, for all that use oc kernel.
In this way to boot phone should use always basic default frequencies, so avoiding fake boot ;-)
---------- Post added at 08:53 PM ---------- Previous post was at 08:43 PM ----------
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
I dont think that overVolt is possible..
squadzone said:
No, thats bug came from cm7 rom, not the kernel
Click to expand...
Click to collapse
the problem is from the kernel dude,I'm running gingercruzt V2 on ketut's kernel everyting is fine on yours dosn't show min/max frequency in performence settings
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
Can you build the kernel??
i read many reference what the best max freq for kernel, and the 883Mhz, is enough for hardware,
so this kernel not just compile, but i read every log when build this kernel and try to fix, to minimize error mod post
if you dont like, dont use it, i just want to share, what i'm doing, and if you like, just give a thanks
maybe i can give a clue, just read below
see this code
Code:
/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
enum {
VDD_0 = 0,
VDD_1 = 1,
VDD_2 = 2,
VDD_3 = 3,
VDD_4 = 3,
VDD_5 = 3,
VDD_6 = 3,
VDD_7 = 7,
VDD_END
};
max freq use code 7, its mean corresponds to 1.325V ( max volt )
go, and build your self,
if you know the bug,
please report, not complain
every device with same type is not same on hardware, some people can boot at 883Mhz, but some people cant, and my kernel freq 883Mhz, but not default, all people will know, if freq is bigger than default its mean OC kernel
all feature is not just add but with some modification that need by device for get best result
sorry for my english

[Q] [HELP] CPU Only 600Mhz

I have only 600Mhz.
I cant overclock only underclock, even with OC-Kernel.
The problem is on Stock Firmware 2.3.3 and Costoum Roms.
Is there a Hardware-Bug or what else?
Not all chips are made to the same quality. They only have to reach a certain clock speed to pass quality checks. Certain devices can be overclocked due to being of higher quality.
Sent from my HTC Desire S using XDA App
Yes but the default clock of the ACE is 800Mhz right? But MY default clock is 600Mhz.
I dont have any options to overclock only from 124Mhz - 600Mhz.
The default clock of 800Mhz would be ok for me..
You sure its a ace? Galaxy fit / mini & 551 / europa are 600mhz MSM7227 vs 800mhz MSM7227-t 800mhz galaxy gio / ace.
Yes! Its definitely a ACE i have the Samsung box here .. and there are a big label Galaxy ACE "800Mhz CPU"
Which rom are you using? Did you have the same problem on stock rom?
Do you have setcpu, if you do go on Info ; CPU what does it say ; Cpu Part / Cpu Revision / Hardware / Revision ?
If problem presist then go to Samsung service centre and change your phone dude
Sent from my GT-S5830 using xda premium
GerasVille said:
Which rom are you using? Did you have the same problem on stock rom?
Click to expand...
Click to collapse
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Cr0nFixXx! said:
Yes the problems are also on stock rom.
I have the costoum rom "CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7" with OC-Kernel
Here are some Screenshots
Click to expand...
Click to collapse
Hi @Cr0nFixXx!...
It would seem to me that your problem is your Kernel... The details in your first thumbnail show the kernel to be that of a different dev to @Ketut...!!! Your OC Kernel details should read as this : 2.6.35.7-perf-CL562111 [email protected]#4
The frequencies of the Cpu are governed solely by the kernel, so this is without a doubt your limiting factor...
The below kernel is tried & tested by thousands of users & is stable under OC...(check my sig for details)...
You can download this kernel from my dropbox here : http://dl.dropbox.com/u/44779766/cm-7.1-oc-kernel-2.6.35.7-perf-CL562111.zip
Flash this kernel from CWM recovery... Reboot phone, go to cyanogen setting/Performance & you should get the full cpu range for OC...
To see stable max OC set governor to "Performance"... Remember, only increase cpu frequency a little at a time & test for stability before increasing further...
Only when you have found your max stable clock speed can you tick "set on boot"...
FYI : OC kernels can only be used with custom roms... They will not work with stock roms... @Ketut's OC kernel will only work with CM7.1 / 7.2 Roms... Do not try with any other rom...
Stay Breezy n Be Lucky...
Pe"ACE"...
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Cr0nFixXx! said:
Thanks for your help but .. same problem
I even cant get it to 800Mhz Default Clock
Click to expand...
Click to collapse
Hey Dude...
This is a very strange problem indeed... The Armv6 cpu is standard 600mhz cpu but samsung factory OC it when it is used in our aces... so we end up with an end-user frequency of 806mhz... Yours won't even reach that out of the box...?
Do me a favour... Flash this rom here : http://dl.dropbox.com/u/44779766/IceCreamSundayFinal_Tweaked.zip
It is IceCreamSunday Final by @Jusada... It is considered the fastest & most stable rom available on XDA & the OC kernel is inclusive of the rom...
Once flashed, go to cyanogenmod settings, performance, cpu & tell me what frequencies you get offered...?
FYI : It doesn't matter what your baseband or firmware version is... Ensure that you are using CWM 5 to flash with... Also ensure that before flashing you do a full system, cache, data, Dalvik wipe to ensure a clean flash... This rom is 7.2 btw...
Stay Breezy n Be Lucky...
Pe"ACE"...
I dont know whats my phones problem but it dont worked for me -.- even max. 600Mhz...
But great thanks for your help!
LoL the first thing that entered my mind is "maybe samsung forgot to overclock" my suggestion is go to samsung and tell them to overclock that.. or simply say it's defective
approach samsung and get new phone..
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
LazySam said:
man if it showing 600 dont overclock
as overclock can damage your cell
be happy with what you are having
Click to expand...
Click to collapse
but he should get 800 which he paid for
hey wait isnt ace's cpu like the 600mhz ones but only OC'ed to 800?
I'm done explaining
A fault with the processor probably.. ARMv6 anyway has 600Mhz by default and Ace has been factory overclocked to 800Mhz.. which is the simple reason why each Ace is so different and has so many problems regarding battery life. Overclocking is a delicate procedure..
To the point:
Just take it to the service center to get what you paid for!

overclock

Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
Of course the life of the cpu is reduced but not so much. I think it is not dangerous unless you set performance for scaling. I usually overclock it at 729 Mhz and have not problems at all
dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
i don't think it's dangerous if it still around 7xx, cuz i've use that for a while now n it's ok.
but i've try oc once with 864mhz and i found some problem that it suddenly get stopped working(hang), i try to reboot n it still the same.
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
dosdos said:
Hello
I overclock my mini at 710 mhz
It stable but is dangerous for cpu ?
The life of cpu is reducted ?
Thanks for you
Click to expand...
Click to collapse
I use it almost all the time at 844mhz...i hv no problems...but i think it reduces life to someextent
Sent from my GT-S5570 using xda premium
techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
Here u go...i hope this might help
http://forum.xda-developers.com/showthread.php?t=1485122
Sent from my GT-S5570 using xda premium
techlearn said:
will you guys tell me how to overclock to 700+ i tried using setcpu...but dont know what to do next, currently using stock ROM 2.3.6, Rooted
Please post the link or pm me
Thanks
Click to expand...
Click to collapse
If you have stock, then there is no overclock for you. Usually, custom ROMs have overclock feature and apps like setcpu, nofrills, etc works on these ROMs.. You'll have to flash custom ROMs first before you can OC or you can check this page from godell:
http://forum.xda-developers.com/showthread.php?t=1485122
OC kernels for stock rom.. Disclaimer: Read first before you do anything. Do it at your own risk..
710 MHz is veeery safe. I only stopped my OC at 806 MHz because on 825 Mhz it was not stable.
At 806 MHz my phone do not heat up, and I didn't notice my battery dying faster.
PS: I OC my phone for more than 6 months continuously (GOvernor: LilgV2; I/O: noop). And use No Frills CPU.
I am having S5570DDKQ7 BaseBand Version, coz in thread he has mentioned not to use this for DDKQ7 version. Please post it in the thread.
as i am not able to post in thread coz i am having less than 10 posts.
thank for all

Editing a kernel

Hey guys I dunno why all devs use 604MHz as the default frequency for their roms. I wanna how how to lock a kernel to a max frequency of 600MHz. Can anybody help me?
u can set that frequency ur self by usin "cpu frills"
avilove4u said:
u can set that frequency ur self by usin "cpu frills"
Click to expand...
Click to collapse
600MHz isn't available. below 604 is 595mhz..
Boss.bhavesh2 said:
600MHz isn't available. below 604 is 595mhz..
Click to expand...
Click to collapse
I do think that the values are preconfigured when the devs compile their kernel. Not sure though why exact values cannot be set such as 600 or 700 Mhz as I don't know how to compile one..
avilove4u said:
u can set that frequency ur self by usin "cpu frills"
Click to expand...
Click to collapse
I think it call no-frill cpu control
Sent from my GT-S5570 using Tapatalk 2
kitrax59 said:
I do think that the values are preconfigured when the devs compile their kernel. Not sure though why exact values cannot be set such as 600 or 700 Mhz as I don't know how to compile one..
Click to expand...
Click to collapse
I found a guide to compile kernel on the fit forum I thinl it will work on our rom with some change
http://forum.xda-developers.com/showthread.php?t=1467149
Sent from my GT-S5570 using Tapatalk 2
try This one, but this built from cm9 kernel sources(for cm9) which stunned white exist, wait bout 8-10sec to boot homescr.
(if stuck try to remove tass.rle,on latest cm9 kernel there is no tass.rle)
page table change (eg.528>600>644>etc,et).
im no expert, please DWYOR.
aprizND said:
try This one, but this built from cm9 kernel sources(for cm9) which stunned white exist, wait bout 8-10sec to boot homescr.
(if stuck try to remove tass.rle,on latest cm9 kernel there is no tass.rle)
page table change (eg.528>600>644>etc,et).
im no expert, please DWYOR.
Click to expand...
Click to collapse
Will this work on cm7? I wanted mebitek's kernel @ stock 600mhz. I don't have linux i don't know how to mod a kernel in windows..
Sent from my GT-S5570 using XDA App

[Q] overclock gpu to 400 mhz

hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
up
pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
pikaone said:
hi guys,
I come from a gs 2 and i just bought a note and install alliance rom (gb)
what kernel can overclock the gpu to 400 mhz as the gs2 with siyah kernel and extweaks.
Thanks for your answer ; ) and sorry for my english i'm french
Click to expand...
Click to collapse
The only one I know of that allows GPU over clocking and voltage control is Thor kernel. Not found on xda as the creator is persona non grata. Google it.
I use the app Voltage Control to specify frequency and voltage settings, very useful. Give it a try.
Sent from my GT-N7000 using xda premium
eug3n91 said:
You should probably check in the Alliance Thread if it's supported and works ok, but I remember from my GB days that Abyss 4.2 (Redpill Touch) was about the best kernel you could flash for our Note...
Also when you say "overclock to 400 MHz"...I suppose that you're talking about the minimum frequency. You can overclock your minimum frequency with mostly any kernel that has root.
I use AnTuTu CPU Master from the Play Store. It's free and really easy and intuitive to use.
Click to expand...
Click to collapse
He is saying GPU not CPU thus the 400Mhz.
I use Tegrak to oc the GPU with Franco kernel.
Sent from my GT-N7000 using XDA
Yeah use tegrak overclock but m using Abyss kernel nd my phone is buttery smooth
thanks shaolin95 but i don't find franco kernel for gingerbread, the only i found is for ics, can you give me a link please
edit: i've installed abyss kernel + bought tegrak kernel ultimate and it works ! thanks for your answer
i wanted to ask does overclocking the gpu help alot in games like more 10 fps ? and does it shorter the gpu's life ?
thanks alot

Categories

Resources