Related
HI there, I have the dreaded 'unable to scan networks' wifi problem- it started after I set up a mobile AP (I didn't turn the AP service off after I'd finished with it- I wonder if that's what caused it?)...
Anyway, I've since learned via this board that I can fix my wifi by 2 methods: 1) performing a reset (would rather not) and 2) editing a line somewhere, root access is required.
I do have a third option- waiting until the 2.2 OTA update comes through, which I understand will require (and perform) a reset anyway.
However, I'm sick of waiting for 2.2.
What I'd like to know is: If I root my phone & fix my Wifi, will I still receive the OTA update?
Anybody?
TIA.
the 2.2 froyo is not OTA
it is OTK (over the kies)
just turn off your phone, then turn it back on, that should reset your WiFi stuck i/o
some times the GPS does that too, just turn off the phone, turn it back on and they work right away.
in contrast to the HTC Windows Mobile phones, the SGS is much much much better, i barely have to do any restart of the phone with Android
with Windows Mobile it was at least 10 reboot a day
Restart doesn't fix it... Tried removing battery, etc. etc.
The 'unable to scan networks' problem is a known issue- at least to this board, If not to samsung.
Sent from my GT-I9000 using XDA App
Im in the same boat as you mate with my Samsung galaxy s, i have tried turning it on and off with alternate battery in and out methods, my wi-fi just wont work now, it turns on, comes up saying "Unable to scan networks" and turns the wifi off.
I have read on many posts about the issue and the best fix appears to be here:
hxxp://forum.xda-developers.com/showthread.php?p=8062313
*Sorry its not linked, this is my first post so i assume it wont let me post links until im roughly around the 25th post mark.
The issue i find with using this method is that in order to browse the phone at a root level to get to that file, you need to pay for the App in the android market to do it.
I have rooted my phone already and already applied the lag fix (boy did that change things), but im more contemplating doing the upgrade to 2.2 than buying the app just to fix a wifi issue. Im hoping this gets fixed in 2.2, or at least a more easier solution / fix.
My question is, if i did buy the app to browse the phones file system and i fix the wifi, does it fix it permanently or just until it happens again and i will have to follow the same process again... ?
did you both turn off Bluetooth when using WiFi?
you can't use BT when using WiFi
I've never had to turn off bluetooth to use wifi before...
However: PROBLEM IS NOW FIXED!!
Here's how I did it:
First, bluetooth was off.
Tried to upload a video shot on the phone to youtube. Got message along the lines of 'will only upload video over wifi'
Next message pops up: 'waiting for wifi'
THEN message box saying' signal strength excellent' & asking for my wifi password!
I've been without wifi for 2 weeks, this is brilliant. Give it a go, try uploading a video to youtube.
I reckon it overwrites the bad line, but who knows. Maybe its a bluetooth thing. I don't care, it worked for me.
Spread the news!
Sent from my GT-I9000 using XDA App- over wifi!
how would I go about updating, when 2.2 is official, without kies or rooting? I've lost patience with kies!
This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies
AllGamer said:
This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies
Click to expand...
Click to collapse
cool, cheers! I think I will try Odin!
Hey everyone, I just recently got a Samsung Captivate with Rogers, which is the i896.
I've been hearing a lot about rooting lately and i'm starting to understand a little more about what it is exactly. I'm interested in the idea that it can help speed up the phone and allow for more apps, but I have a few questions.
1) Where can I find the most recent way to root a ROGERS Captivate? I was reading around and read that the "One click fix" does not work anymore
2) Will rooting my phone change the interface of the phone?
3) If something goes wrong and my phone doesn't root, can I go back to the default settings easily?
I might have more questions later on but thats it for now. I'd just also like to hear your opinions on rooting and what exactly YOU have been able to do with your phone by rooting.
Thanks!
welcome ill answer your qs first then ill give you some links to help you out
A)rooting and flashing roms (2 diff things) are easiest done from STOCK 2.1 (which you should have) if you plan on flashing custom roms DONT do the rogers/samsung keis firmware update. it changes the recovery to 3e. (ink below if needed)
B) rooting does not change the interface. ROMS DO
C) if you cant successfully root, nothing has changed. you should be able to tho. and you can UNROOT, and wipe to factory too. for warranty repairs and they will never know.
OPPINION:
custom roms are the way to go, more current, full featured complete and on time, cutomizable, fun, and brain-power using than stock roms.
MY ADVICE: DO IT but TAKE YOUR TIME AND READ. I READ FOR 3 or 4 days before i touched a thing!! and still had very minor issues and things that had to be ironed out. dont let that scare you. its a learning experience. hopefully with the links i give you you will have less SEARCHING TO DO. but you my freind, are in the right fourm and right section, too! i have a good feeling about you already!
YOU CAN DO IT WATERBOY!!!
LINKS!!!!
http://forum.xda-developers.com/showthread.php?t=858765 start here.
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896 i896 specific crap but see i897 page too, same phone same guts (see rooting, hell read the whole thing)
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897 i897 wiki
http://forum.xda-developers.com/showthread.php?t=872455
http://forum.xda-developers.com/showthread.php?t=905042
http://forum.xda-developers.com/showthread.php?t=909213 (3e recovery if you run into that)
oh and it took me forever to learn that there is an ODIN one-click, and an Odin3 1.7, both flashing programs but DIFFERENT, we can use ODIN one-click but not recomended it flashes AT&T stock back. ALSO not to be confused with one-click ROOT,,,
Typically its best to read around but you can use the following for rooting and unrooting
It doesn't change the interface
http://forum.xda-developers.com/showthread.php?t=803682
I used it, no issues and now with a new ROM as well - you will stumble on many thing but this site has everything but u need to read a bit
Hey there, the rogers captivate is the same as the at&t captivate. I found a rogers phone in the snow, wiped, rooted and unlocked it. Installed at&t firmware and then flashed serendipity. I'm using it on telus no problem. Everything in this captivate forum will work great.
Sent from my SAMSUNG-SGH-I897 using XDA App
First of all, thank you guys so much for giving me real replies instead of a bunch of "Go read for yourself" or "try the search button" lol... I've been doing some reading but I needed to ask a few direct questions.
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
gs1003 said:
First of all, thank you guys so much for giving me real replies instead of a bunch of "Go read for yourself" or "try the search button" lol... I've been doing some reading but I needed to ask a few direct questions.
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
Click to expand...
Click to collapse
Just rooting the phone does not change the interface at all. Rooting just allows you access to the locked system files so you can change them.
Also you won't have to use terminal commands to do hardly anything, but it would be a good practice to learn how to use it.
From there you can change your keyboard if you like. There are a few keyboards out there that are better than the stock keyboard is, as far a functionality.
Be warned once you get onto flashing and modding your phone, its like an addiction, and you probably wont be able to stop.
thatguysteve said:
Hey there, the rogers captivate is the same as the at&t captivate. I found a rogers phone in the snow, wiped, rooted and unlocked it. Installed at&t firmware and then flashed serendipity. I'm using it on telus no problem. Everything in this captivate forum will work great.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did you try and find the actual owner first?
Keithyv` said:
Did you try and find the actual owner first?
Click to expand...
Click to collapse
Ya, but no one called the phone. The screen was locked and I couldn't get into the phone. I think it was outside for a while, reported lost and deactivated.
Sent from my SAMSUNG-SGH-I897 using XDA App
gs1003 said:
@Trusselo, i'm not too ignorant to computers. I know my way around a computer and used to do some web design and basic coding so i'm somewhat okay.
My only concern is that once i've rooted my phone, I have to use some sort of unix/linux commands to work around my phone and do things? Is this true? Also, I read that the rooted version has a different keyboard? I still have a hard time getting used to this touchscreen board.
SIDE QUESTION ABOUT CAPTIVATE AND WIFI: This is my biggest problem right now, its actually a small problem but it gets annoying. Basically, my WiFi stays connected when i'm at home but sometimes it seems like it slows done or the connection lags or even stops working. I can usually tell if this is happening because pages don't load fast enough in the browser or don't load at all. While this is happening, my wifi connection still says "Connected" though. I always have to go back, disconnect, re-type my password, connect again. Then I go back and it works fine. Is there any way to fix this?
Click to expand...
Click to collapse
i really hope that you didnt think i was accusing you of not being good with computers or being patronizing, i was just trying to provide you (or anyone else that reads this) with as much info as i could, while not doing the work for you.
terminal commands: ive never had to use them, no adb shell, no terminal emulator on phone, although it wouldnt be outside of my skill, i just prefer to do it without learning something i dont need to. (yet.. still thinking about learning some apping)
keyboard: rooting does not change any part of the UI at all, all rooting does is allow you to access (read / write / copy /delete) protected system files. And you can only do those scary things with use of other root apps after rooting your phone.
wifi: this is why some people flash new modems, if you still have issues and really want to send it back for warranty, dont worry, you can have it back good as new in no time!
Not too sure what you mean by flash new modems... ? And I wasn't accusing you of anything lol. Just letting you know that i'm not 100% dumb when it comes to computer but even then I don't know if I would be ready to use typed commands and stuff to use my phone.
gs1003 said:
Not too sure what you mean by flash new modems... ?
Click to expand...
Click to collapse
The modem is simply what the phone uses for connectivity. It is a separate piece of the firmware that can be flashed on its own. It is a topic that is a little beyond the scope of this post. However, there is a stickied thread in the Captivate development forum called 'the modem thread' that outlines a lot of the information. The main reason many people do this change is that some experience better connectivity, lower battery consumption, and some other benefits. Again modems are beyond the scope of this post, so I encourage you to read that sticky, as there can be some pitfalls to changing modems. Best of luck and enjoy the great phone!
Oh okay thank you. I thought you meant I would have to take my phone back and get a new one. The WiFi works fine, its just that I have to disconnect, enter my wifi password, then reconnect sometimes for it to work properly.
Do you mean that the WiFi is something that can be changed after the phone is rooted to work better?
Can't say for sure, but it's always worth rooting anyway.
Sent from my SAMSUNG-SGH-I897 using XDA App
I been having weird issues with my captivate. Latley on wifi connection I would have no internet, YouTube, or market. Even sometimes on 3g my YouTube will say no communication or server error as well as android market. It started happening a month ago where my phone kept saying force close cause of facebook and android something and I had to reset it back to default. (People said there was no fix).
Last night I had to reset it again because it kept saying it was downloading a program from the market and never stopped for 2 days. It also disabled any downloadable update. So before I reset I unrooted it with z4 mod and reset. Also wiring stopped working.
It was OK until I rooted with z4 and now I'm starting to get connection issues. It doesn't matter what house I'm at its the same. I rooted it before by using the computer and busybox and it was fine
If the issues only happen when its on wifi....YouTube will never work. It will say error or no network and refuse to do anything even on 3g. And it will never ever let me log into my Google account anymore. I know I'm using the right password cause I can log into my home computer
Also my TV out is all static and blurry regardless of pal or NTSC output and it doesn't work regardless of the plug I use and TV. I even switched all rcas to make sure the video isn't in another output
I'm on eclair 2.1. I am really irritated and tired after a day of searching. Thanks!
An easy way to check to see if its software and not hardware would be to flash stock with Odin. And test again.
Sent from my SGH-I897 using XDA Premium App
Unfortunately I didn't back it up: :/
Also I never flashed before
I was going to try to learn how to flash and I just remembered this phone would never go into its boot menu. I used to be able to use sdk to do it but after my last reset it doesn't work
I'm not dumb I done every method that people said many times with no luck. It has never went to it manually
Try using Titanium Backup to back up important data you might have on your phone. If you're having market problems, connect your phone to your computer and manually backup files. Then, follow the instructions here: http://forum.xda-developers.com/showthread.php?t=731989 to get Odin3 One-Click and the necessary drivers, and then use it to flash back to stock JF6 (2.1). Then, once you're back in stock JF6, enable USB Debugging in your phone settings, change USB Connection type to Mass Storage, and with Odin3 open, plug in your phone and mount the internal SD card, then click on Master Clear in Odin3, which will wipe all your user data. Then, if you decide to install ClockworkMod Recovery, use it to format cache, user data, and Dalvik cache. Hopefully, this will solve all of your problems
OK...there is nothing much on my phone. All the goods are on the SD card that I can easilly put back on the computer.
I will try what you say. I really want to get everything working before I start having fun with themes and other things to make my phone unique
Thanks. Ill report back later tonight!
My phone works, and for the first time ever I was able to go into the boot screen! lol.
I did the flash, and then master reset.
So what now, should I root it again? Or wait, or fiddle with themes? Or just run stock to see if I have issues?
Will this correct my video output to?
Well I went to the dark side. I felt overconfident in flashing my phone so I decided to learn how to install another ROM. Now I am running cognition 4.3.
I like the new look. The speed is crazy compared to stock 2.1 eclair.
I want to officially thank you for the help that you given me. Its hard to understand sometimes on this forum. But with the assistance of the tutorials on this site, and YOUTUBE everything works out ok. I wish you guys lived closer, id hook you up with some beer lol.
Now I got to figure out why ADB doesnt work on my computer =).
Ill check my video output tomorrow as well.
No problem, I'm just glad your phone works again
And btw, no need for beer because I'm only 16 lol
Hi All,
I'm in the UK and have a US version P7310 wifi only (Samsung refurb bought off ebay)
Up until the ICS update 3 days ago it was in my opinion an awesome piece of kit
however, since the update, my wifi connection (or data transfer) is down at least 70% to what it was on HC 3.2
I am NOT losing the connection to the router, it is the data transfer that is down!
Many times I get the page is not available try later link might be down or if the page does load most of the data many images do not!
Repeated refreshes seem to have no affect! It was super fast before the update!
I have rebooted and still nothing, so I feel it is an issue in the tab rather than any other kit I have at the moment?
I have a wifi laptop and other android device and they perform as before on wifi so it's not the router!
I have also put the tab next to the router and it has made no difference!
I have searched the settings in the tab for anything obvious like load images or choke the bandwidth or whatever
and have turned many things on and off without success! I use the standard browser and the dolphin browser and both
act the same!
The tab has never been routed, it came with HC3.1 then I updated over the air to HC3.2 and then to ICS4.04
I know there is a folder for wifi in the settings and wondered if there was anything I could change to see if it improves anything?
Or has anyone else found their wifi is poor?
The 70% was accurate, not exaggeration, so much so that the tab is unusable for me like this!
I know it is early days for the ICS and the 8.9 world but would REALLY appreciate some advice for things to try please?
Kind regards
PS loved the noob video
Is it possible to go back to 3.2? I I restore factory settings it shall go to 3.1 and I assume 4.04? Would it go to 3.2 first?
Hmm...
Well, the support thread for the official ICS update has no mention of such issues.
Doing a factory reset will only reset the current ICS 4.0.4 to its default settings and will not revert the tablet to Honeycomb 3.1 or 3.2.
To downgrade, you should attempt through Kies, though I am not sure it offers the feature.
What I am certain of is that you can downgrade to 3.2 fairly easily by manually flashing a 3.2 firmware release.
You can download an official Honeycomb 3.2 United Kingdom release for the P7310 HERE
If you have no idea how to flash it through ODIN, please download this .zip archive that holds all the necessary tools. Then refer to THIS thread (where the archive came from) and read the short instructions on using ODIN in the How-to Section, last topic named "Using ODIN 1.85".
If you proceed to downgrade, consider to load the provided .pit file in ODIN 1.85's folder and checking "Repartition" in the program. Clicking Start with the .pit file loaded will wipe all data from your device, including everything that resides on the SD card.
After successfully downgrading to Honeycomb 3.2, you can attempt the ICS upgrade once again, but make sure to execute a factory reset from within Honeycomb's settings (or through recovery mode) on your device, before doing the update.
If the Wi-Fi issues continue within ICS, I am afraid I am short of knowledge to help track down the issue.
Good luck.
Solution?
Hi.
Maybe this will work for you: http://forum.xda-developers.com/showthread.php?t=1846766
strange
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Did you go to ICS using Odin, Kies or OTA?
Have you tried flashing the Stock ICS through Odin?
Have you tried doing a full data wipe? (reset to Stock)?
If you need to keep your app data, then save it with something like Titanium Backup (or make a Nandroid backup so you can return to current state, after experimenting)
What is your router? anything "exotic" about your WLAN settings?
fred_be9300 said:
I doubt this is related to the 5ghz issue (that has different symptoms = not being able to connect).
Click to expand...
Click to collapse
Not different symptoms. Equal symptoms. nakedninja42 was referring to the 5GHz band in his post,
[Guide] Enable Wifi 5GHz Stock ICS: I noticed that I could not connect to 5GHz after updating to stock ICS.
Click to expand...
Click to collapse
but did not say that he couldn't connect at all. And thus it makes sense to try it. Especially since Bananajet writes
that he doesn't lose connection - only speed (transfer).
Connection
Gentlemen,
thank you for your concise replies! To answer the points I think worth noting!
I downloaded OTA using the tabs own system (the 300mb file) it updated ok!
I did notice that I had to download 3 times as each previous one did fully download but didnt do anything!
On these downloads, I did not have the charger plugged in but had approximately 75+% of battery!
When I did do it the third time with charger plugged in, it updated as you would expect!
Strangely the tab has improved today and I would say 95% of clicks to a website or a refresh have performed as usual!
However (using dolphin browser) with one site open and a new tab for another, it would again not load all the images on the second page
but did NOT give me the page down link like the day before!
I would say it was a bad day for my wifi BUT the other bits of kit I use ALL performed as usual when the tab didnt
so I am still unsure of the problem? I did consider that the other bits of kit (nokia phone, Android Phone and a Laptop)
although NOT actively connecting to anything to download except being on whatsapp might be bullying the tab out
but I tried turning them off and it didnt change anything!
So I think I shall watch what happens and report back and see if anyone else mentions poor transfers?
By this I mean I REMAIN connected to the router and im NOT sure of the actual transfer rates BUT its like
the connection stops half way when the page loads (link down or photos half loaded) and no amount of refresh makes them reload
until such a time (usually 5 mins) that it does! This then does NOT start working normally (fast loading) but usually repeats itself
and doesnt load again! I do feel that any sites with mainly text and mininal graphics did load ok giving the impression
of a burst of power and then giving up hallf way if there was too much to load (my words, not one from a tech manual haha)
So just to say, the tab is working much better but not perfect! Shall report again when have more hours online!
Thank you again for your help
Kind regards
Bananajet
Update
Gentlemen (and any ladies)
after a few weeks using ICS 4 here are my findings! If anyone can help I would be very grateful as right now, the frustration doesnt compare!
I also realise my original title was slightly misleading, please note I NEVER lose connection to the router, it is the data that seems to
be choked! Almost like the tab only allows a bit through at a time and if there is a load to come through (images or streaming television), it chokes it and very little gets through? Interesting though I dont seem to have any issues wastching youtube much!
To recap, p7310 8.9 wifi version which was a refurb from the US direct from Samsung! Im in the UK! Originally came with HC3.1
I downloaded 3.2 straight away and have done nothing to this machine to alter what came out of the box!
I was very very happy with it and 3.2! Of course, as everyone else, was excited to get ICS 4.04
Downloaded ICS OTA with the update on the tab
I have noticed nothing for my type of usage much difference in ICS apart from possibly better battery but battery was ok anyway!
Back to my problem!
Web pages which contain any amount of thumbnails which might change (alter their positon on the page) when requested as a new page or refreshed very rarely load all of the images! It might load about 5-10% of them when the problem exists which is about 75% of the time! Also streaming live television is very poor to connect although when connected, it works perfectly!
On 3.2 even in my garden I could load web pages that were graphic intensive (nothing extreme, just were there might be mulitple thumbnails etc)
they would load as quick as you would want, reloads, new pages, browsing etc all worked perfectly and streaming television too!
I use the stock browser and one called dolphin
On ICS I would say about 75% of the time, any pages as mentioned above do not load all of the images, only probably about 10% of the images would load, the reast would have place marks showing where the other images should go! It would then stop! Any amount of recycle does not improve it until such time (can be a minute, can be 5 minutes)! The other 25% it works basically as it should, quite fast and normal!
One other issue is IF it is working correctly and I try and load a new tab or page in the background then the new page is highly unlikey to load correctly with any images it might want to display! Like "You cant have both mate" haha
On 3.2 any streaming video or television was perfect, fast and never failed! On ICS it has a 80% failure first time and requires usually 3-4 recyles to 'hook it'! Once it is in, it stays in and works well! If I try and change channel or view something else, it reverts to failure again!
I have changed no settings on router, changed nothing about anything! All other items in the house that might use wifi still perform as before!
The change in the quality happend immediately after ICS download.
This issue has left what was a fantastic bit of kit very frustrating to use and almost unusable!
I would really like to go back to 3.2 if I can but am unsure how easy this is although I do understand that was mentioned in an earlier post
I cannot try the 5ghz method as it is not rooted and to be honest, I am in the UK and that issue is regarding the US networks! My ccode says GB and not ALL btw.
To summarise, it seems that any new or data that requires a lot of refreshing rather than drawing from a cache doesnt want to load?
Any advice would be very helpful,
thank you all again.
Bananajet
Perhaps to do with the wifi channel used by router? Try to use channel 1 (or 6 or 11, avoid higher)
Try an app that gives WiFi diagnostics, like WiFi Analyzer.
Alternatively, reflash any other stock HC or ICS Rom through Odin... You might lose data (downloaded apps, settings, ...) along the way though (not sure, depends on exact approach, etc)
Have you try to test the speed connection wit your tab? I try whit speedtest.net in that site you can find the version for mobile, download it and try, just to see if it is a problem related whit your browser or with you wifi drivers
hope it could help
PS. you can find the app in play store too (same name)
I have a Samsung Captivate i897 and just put 4.4.4 KitKat on it. Running a bit slow. Not horrible but noticeable. How does OS version 5 work on the Captivate? Guessing slower than KitKat as OS versions usually get more enhanced?
If people had to recommend a particular OS that was the most current you could get without any real loss in performance what would it be? Found 2.3.5 was fine the few minutes I was on it. But that's pretty old. Was originally going to go for 4.2.2 but found an article on 4.4.4 so went straight to it. Curious other's opinions.
Thanks.
jR
jriker1 said:
I have a Samsung Captivate i897 and just put 4.4.4 KitKat on it. Running a bit slow. Not horrible but noticeable. How does OS version 5 work on the Captivate? Guessing slower than KitKat as OS versions usually get more enhanced?
If people had to recommend a particular OS that was the most current you could get without any real loss in performance what would it be? Found 2.3.5 was fine the few minutes I was on it. But that's pretty old. Was originally going to go for 4.2.2 but found an article on 4.4.4 so went straight to it. Curious other's opinions.
Thanks.
jR
Click to expand...
Click to collapse
Try CM10.1.3 stable it best
Thanhtho96 said:
Try CM10.1.3 stable it best
Click to expand...
Click to collapse
Thanks for the help. Excuse my naiveté with this process, first time upgrading an old Android phone last night. Actually got me more interested in Android devices than I ever was. I installed CM11 nightly and as mentioned with 4.4.4 it was a bit slower than I'd like. What OS gets installed as part of 10.1.3? Is that 4.3? Also as far as "stable", is it very responsive if that's the case?
Thanks.
JR
jriker1 said:
Thanks for the help. Excuse my naiveté with this process, first time upgrading an old Android phone last night. Actually got me more interested in Android devices than I ever was. I installed CM11 nightly and as mentioned with 4.4.4 it was a bit slower than I'd like. What OS gets installed as part of 10.1.3? Is that 4.3? Also as far as "stable", is it very responsive if that's the case?
Thanks.
JR
Click to expand...
Click to collapse
10.1.3 is android 4.2.2 and it very stable, responsive, fast and smooth
Thanhtho96 said:
10.1.3 is android 4.2.2 and it very stable, responsive, fast and smooth
Click to expand...
Click to collapse
Sweet appreciate your input. Is there a good way to backup the contacts and stuff? This is a relatives phone and I think they are getting tired of having to re-enter the contacts every time I try a new OS version. I did have the contacts entered this time as "google sync" contacts, but not sure if that will be accessible in 4.2.2 and a few I entered as local contacts before I knew I couldn't change it to google synced contacts later.
Thanks.
JR
jriker1 said:
Sweet appreciate your input. Is there a good way to backup the contacts and stuff? This is a relatives phone and I think they are getting tired of having to re-enter the contacts every time I try a new OS version. I did have the contacts entered this time as "google sync" contacts, but not sure if that will be accessible in 4.2.2 and a few I entered as local contacts before I knew I couldn't change it to google synced contacts later.
Thanks.
JR
Click to expand...
Click to collapse
The 'google sync' contacts should be accessible from 4.2.2. As a precaution you could also open the contacts app and export contacts to your external sdcard. Then, if 'google sync' does not replace your contacts you could import them from the external card after flashing the replacement ROM.
BTW, I am using GamerzRom 4.0 Legend Edition on my Captivate. It is based on CM 10.1 which is android 4.2.2. It runs well for me. I saw it recommended several times by @BWolf56. I maintain my Captivate as a backup device to my SGS3. While I do not use it as a phone, I do use it constantly as an mp3player, sports tracking device, etc. I am still able to load new apps and update current apps.
Thanks for the tips and reference to GamerzRom 4.0 Legend Edition. One question unrelated to the nature of the thread. Captivate currently has 4.4.4 installed. When a text message comes in, and has pictures included, which is all that came in so far, it fails to return the message. I can't recall the message as at work now but says it couldn't connect or something. I just know it's a picture as the person who sent it told me they would be texting me with some pictures. Is this something broken in 4.4.4 that may work in 4.2.2? Otherwise may have to go to Samsung default 2.3.5.
Thanks.
JR
jriker1 said:
Thanks for the tips and reference to GamerzRom 4.0 Legend Edition. One question unrelated to the nature of the thread. Captivate currently has 4.4.4 installed. When a text message comes in, and has pictures included, which is all that came in so far, it fails to return the message. I can't recall the message as at work now but says it couldn't connect or something. I just know it's a picture as the person who sent it told me they would be texting me with some pictures. Is this something broken in 4.4.4 that may work in 4.2.2? Otherwise may have to go to Samsung default 2.3.5.
Thanks.
JR
Click to expand...
Click to collapse
It could be a couple of things, a few things to check before flashing anything are:
1) Check in settings to ensure that the APN settings are recognized.
2) Make sure your modem is recognized.
3) Check the settings of the messaging app you are using.
4) Make sure data is turned on. On one of my devices I routinely keep data turned off. I will get notified of an incoming MMS with pictures, video, group messages, etc, with a icon to click to download the message. If I try to download the message before turning data on I will get an error message. After that I am unable to download even after turning data on.
On the Captivate you can reflash your modem separate from flashing the entire stock ROM, which I would do before flashing back to stock Gingerbread. If flashing the modem only doesn't work that's when I would flash stock GB 2.3.5.
I'm now at 4.2.2. Texting working but sometimes pictures are a bit laggy coming in. Sometimes come in out f order if I send a text then a picture then another text, I'll get two texts and then the picture. But it shows up. I do have one thing that concerns me. When I first upgraded Mobile Network State was Connected, now it's disconnected. Not sure if that's something that happens once you switch from 3G to being connected also to wifi.
JR
jriker1 said:
I'm now at 4.2.2. Texting working but sometimes pictures are a bit laggy coming in. Sometimes come in out f order if I send a text then a picture then another text, I'll get two texts and then the picture. But it shows up. I do have one thing that concerns me. When I first upgraded Mobile Network State was Connected, now it's disconnected. Not sure if that's something that happens once you switch from 3G to being connected also to wifi.
JR
Click to expand...
Click to collapse
Some of that may be related to the modem version. I guess you could try another and see if it works better.
As of one of the Jellybean releases, I don't recall which, the network data connection is automatically disabled when you are connected to wifi (IIRC).
Been running since last post now. Been working good. Only issue I have is the soft buttons. When unplugged it turns off in the odd setting of 1.6 seconds but when I plug in the charger the soft buttons stay lit up all the time. Can't get them to turn off as long as plugged into the USB port and charging. Thoughts?
Thanks.
JR
jriker1 said:
Been running since last post now. Been working good. Only issue I have is the soft buttons. When unplugged it turns off in the odd setting of 1.6 seconds but when I plug in the charger the soft buttons stay lit up all the time. Can't get them to turn off as long as plugged into the USB port and charging. Thoughts?
Thanks.
JR
Click to expand...
Click to collapse
Mine is turning off after the set time (1.6 sec) when plugged into a wall charger, and when not plugged in. I may have other things on/off different from you that is affecting this; such as notification lights turned off. Also, I haven't tried with the USB cable set into a computer port.
Thanks. Doesn't help but thanks. Mine is out of the box settings. Tried a bunch of changes but nothing works.
JR
jriker1 said:
Thanks. Doesn't help but thanks. Mine is out of the box settings. Tried a bunch of changes but nothing works.
JR
Click to expand...
Click to collapse
Which ROM did you end up installing?