Database Develop

stuck in odin

<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> Enter CS for MD5..
<ID:0/006> Check MD5.. Do not unplug the cable..
<ID:0/006> Please wait..
<ID:0/006> Checking MD5 finished Sucessfully..
<ID:0/006> Leave CS..
<ID:0/006> SetupConnection..
how long does it stay like this for?
What will i do if it doesnt do anything ?

ok think ive done it . hopefully it doesnt get stuck at factoryfs.rfs . all i did was go on process kill kiestrayagent. then i did download mode while the phone was off. not turn the phone on then do download mode as i did. just a care for any1 else . thanks

that should fix it.... never use odin if kies is running thats probably what caused your problem

marcon10 said:
ok think ive done it . hopefully it doesnt get stuck at factoryfs.rfs . all i did was go on process kill kiestrayagent. then i did download mode while the phone was off. not turn the phone on then do download mode as i did. just a care for any1 else . thanks
Click to expand...
Click to collapse
My last odin flash failed on the factory.rfs don't know why ive flashed the phone many times before with odin never had any problems. So i Removed the battery and re flashed with re-partition 512.pit. Working again

Well that was my first flash to darkys 9.2 resurrection and went well. Just learning to configure battery. Just reading on darkys 9.3 .
Sent from my GT-I9000 using XDA App

Hi,
Im stuck at SetupConnection....

smartin said:
Hi,
Im stuck at SetupConnection....
Click to expand...
Click to collapse
Did you close all Kies processes in task manager? If not do so and you should be able to flash now

Odin Problems or im doing Crap? Please Help
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Doesn't switch on after flashing HELP NEEDED

Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
EDIT 2: now, after 12 hours wait, the device doesn't do anything anymore when I connect it to the PC, no USB connect, no sign of adding it in Odin. It seems like the charging mechanism doesn't work anymore either. The deivce appears totally dead.

Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
[REQUIRED FOR FROYO-BASED TABS ONLY:] Your Tab must be rooted. (Please look for SuperOneClick root method as it’s usually the safe bet! But for more information on rooting, please refer here: http://forum.xda-developers.com/showthread.php?t=812367)
Click to expand...
Click to collapse
I hope someone can help us, or else, no choice but to bring this to service center.

itenos said:
Hi,
my girlfriend just came back from China with a P1000 from her friend. As the whole device was running on chinese language and for some strange reason it was not possible to enter System Setting to change the language, I decided to flash her the latest firmware and just make a fresh start. (i'm a flash veteran on my SGS since 2 years, so I know how to use Odin)
I downloaded the P1000XWJQ8 from Sammobile, fired up Odin and flashed the new ROM with repartition enabled.
The procedure went through without errors:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P1000XWJQ8_P1000XXJPZ_P1000DBTJQ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> cache.rfs
<ID:0/003> hidden.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
At the end of it the device didn't auto-boot as expected, it just stayed there with a black screen!!!!!!
Disconnecting and reconnecting it triggers in Odin the REMOVED and the ADDED lines but nothing happens.
I cannot switch on, cannot go into download nor recovery, the device just seems to stay dead :-(
My next idea was trying to pull the battery but apparently the battery is glued to the casing, so before I do more damage, I better start asking here.
Hope someone can help, my girlfriend will kill me if I can't repair this damn thing...
EDIT: after having closed Odin on the PC I tried to connect the device again and it started to play the startup song and Win7 started to install the new drivers from the new firmware. 7 out of 9 found drivers installed correctly, 2 instead failed.
But nothing changed to the vegetarian state of the P1000
Click to expand...
Click to collapse
MarlX said:
Did you see my thread http://forum.xda-developers.com/showthread.php?t=1769144? This problem is totally the same as mine.
Is yours rooted? Coz it says here http://www.teamovercome.net/p1000/?page_id=17 that :
I hope someone can help us, or else, no choice but to bring this to service center.
Click to expand...
Click to collapse
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.

qm4n76 said:
hey guys, are sure your gtab is P1000??
see the back cover, and chek your gtab model to make sure.
Click to expand...
Click to collapse
Yes, 100% sure, my one is a P1000. As wrote in EDIT2 my device now seems to be totally dead

[Q] Galaxy note Help.. I think it's Bricked!!

I have a Note N7000, It is rooted with Philz Touch 5. I had issues with it last friday where it would restart when trying to start any random app.
Thought it weird, maybe it's the last app to be put on - but no. Went into the phone and cleared the cache in Philz Touch 5. After this the phone would not start again.. much to my disappointment.
I have downloaded Odin3 v1.87 and have downloaded the attachment from this thread. http://forum.xda-developers.com/showthread.php?t=1354888
i have also purchased a JIG from this Ebay ad. http://www.ebay.co.uk/itm/141209048811?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The JIG doesn't work, ODIN can read my phone when it's plugged in - and has successfully done the PDA & BOOTLOADER tasks.
I hope & feel that I can bring my phone back to life - I would someone to help me to understand what next steps I can take to do this.
Thanks for all your help in advance..

Can you boot into recovery?

Azeazezar said:
Can you boot into recovery?
Click to expand...
Click to collapse
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.

marmyte said:
I unfortunately can't get it to do anything.. I am hoping there's something I can do that i haven't tried.
Click to expand...
Click to collapse
What the PDA and bootloader task? How did you do it?

nokiamodeln91 said:
What the PDA and bootloader task? How did you do it?
Click to expand...
Click to collapse
Used C:\Users\Stev\Downloads\removeyellowtriangleNEW\2-ZSLPF.tar for BOOTLOADER
And C:\Users\Stev\Downloads\removeyellowtriangleNEW\1.tar for the PDA
All went well -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Used Odin3 v1.87

EDIT
I just noticed those files are from triangleaway. NOT the stock rom. What you flashed is to remove the big yellow triangle at boot.
Download Stock GB or Jellybean, and flash those with odin. That should fix your phone.

Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.

marmyte said:
Can you put me in the right direction for the stock roms, I've tried a download for uk vodafone but it goes to hotfile with a warning message
Thanks.
Click to expand...
Click to collapse
Why did you even flash those files? Go to www.sammobile.com and download a firmware. Then flash it using Odin. Just use the PDA tab to flash the rom.

It failed, can i try to flash with an older rom?

You can flash any rom from that site. i recommend avoiding the ICS roms though.

marmyte said:
It failed, can i try to flash with an older rom?
Click to expand...
Click to collapse
How where why?

Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

marmyte said:
Using Odin3 v1.85
It gets to this stage and... How long does it take?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
There is some connection problem with phone and PC.. so kill all kies processes.. run odin as admin.. reboot into download mode and try again.

killed all kies processes.. run odin as admin.
Got this..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLT9_N7000XXLT3_N7000VODLT4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help please:crying:

marmyte said:
killed all kies processes.. run odin as admin.
Help please:crying:
Click to expand...
Click to collapse
Flash a tar version of Philz kernel like XXLTA or DDLSC. using odin. The power off the device and boot into recovery. This should get you into CWM. Format system, data, cache and preload. Then reboot into download mode and flash this rom again OR you can flash any custom TW or CM rom.

I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me

marmyte said:
I'm really sorry, but I don't understand what you've just said - can you make it any easier for a novice like me
Click to expand...
Click to collapse
go to this link and in post 3.. there is download for TW kernels. download the latest tar version.
boot the phone to download mode and select the tar kernel in PDA and flash it. Odin will say KERNEL.. If it completes. power off the device and try to boot into recovery.

Odin successful - but can't boot into recovery..

marmyte said:
Odin successful - but can't boot into recovery..
Click to expand...
Click to collapse
Why not? Power off the device. In fact remove the battery for a couple of seconds.. Then put it back. Press volume up home and power together till you see the N7000 logo and let go..

Tried it.. Nothing happens - but i can touch the screen and it'll vibrate?

HELP !!!!!!! Unrooting Samsung S6 fail

Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks

Must use Odin v3.10.6
Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse

wp4jot said:
Must use Odin v3.10.6
Click to expand...
Click to collapse
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks

I don't. Did you flash all 4 files at once?
Neostatic17 said:
Hi wp4jot,
i have used odin 3.10.6 but it still don't work do you have an idea why its not working , or how can i solve this problem
Thanks
Click to expand...
Click to collapse

I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.

vontokkerths said:
I had this problem.. You must have v3.10.6 and flash every file in the corresponding place, after that I still got a fail message but I tried un-checking the auto reboot option and that did the trick (this will make the phone stay in download mode even after you complete the flash, to quit download mode you must press the volume down button and the power button at the same time for about 10 seconds) hope that helps, let me know.
Click to expand...
Click to collapse
I Have the same problem with S6- SMG20T (Dutch) Now trying to un-check the auto reboot otion. Hope it works for me.
didn't worked for me

wp4jot said:
I don't. Did you flash all 4 files at once?
Click to expand...
Click to collapse
What do you mean with that? witch 4 files?
Hope you can help me.
After a factory swipe and installing vodafone wallet on my S6 it says that it doesn't work on a rooted Phone

You have to put each file in the corresponding place, when you download the stock rom after you've extracted the zip you're supposed to have a file called AP, BL, CSC, AND the other which I cannot remember, those are the files you're supposed to flash, if you try to flash just AP like on the screenshot it's not going to work.

Neostatic17 said:
Hi everyone,
I bought a new samsung s6 and rooted it using pingpong, now i must unroot it so i can install the new update, well i downloaded the firmware stock odin 3.10, but everytime i try unrooting it usin odin i have this message
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My samsung is a G920F
firmware i trying to use is G925FXXU1AOCV_G925FH3G1AOC1_G925FXXU1AOCW_HOME.tar.md5
im so desesperate i tried so many time but no changing at all can someone help Me please
Thanks
Click to expand...
Click to collapse
I think you downloaded the wrong firmware for your phone, your phone is G920F and the firmware you are trying to flash is G925F.

@Neostatic17, it looks like you downloaded the wrong file. The file should be a tar.zip, not tar.md5. Once you download the correct tar.zip, extract the file and you will see 4 files within the one file you downloaded. Then flash all 4 files with odin.
Edit...Ok, I've checked my pc and the file is a tar.zip before you extract it and once it's extracted, there are 4 tar.md5 files. All you have to do is put the AP file in the AP slot, BL file in the BL slot and so on. I leave auto reboot checked, but that is up to you.

[Unbrick Help]! RP/No Load, BL/Wont Install N/A

Hey guys need a little help here, i just bought a motherboard for my girlfriends s5, the old one seemed to overheated and died, yeah seriously. was just sitting on the bed.
I just spent $100 to get an AT&T Mobo, cracked open the phone and installed it. (The LCD is really thin, but to my suprise is really strong)
Stock Android 5.0 L, tried to to downgrade to 4.4.4, realize i cant now because of locked bootloader. trying to just restore back to Android 5 now.
Recovery mode presents " Firmware upgrade encountered an issue, Please select recovery mode in kies"
Download mode presents " SW Rev Check Fail : [aboot] fused > 4 Binary 3 "
I suppose this is because i flashed 4.4.2 in Odin the following
AP, CP, CSC
BL was NOT flashed!
Currently tried to find BL, AP, CP and CSC for 5.0 L, figure it would solve the problem
However my google-fuu leads me no awnsers, Closest thing i could find was.
theandroidsoul dot com /att-galaxy-s5-lollipop-update-odin-firmware-80652/
looks like it will flash 5.0 software, but.
My odin fails everytime i try, I have tried this on two computers, Windows 7 & 8
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
I really dont think its a driver issue., tried multiple cables.
Thanks