Everyone is in a panic (well almost everyone), how many of you guys are braving it out on the ICS release with CF Kernel?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7000 using xda premium
Lol.. I am its fine
No probs here
Narada2XK said:
Everyone is in a panic (well almost everyone), how many of you guys are braving it out on the ICS release with CF Kernel?
View attachment 1056426
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I too, am on LPY and everything is fine. while others have issues on battery and wifi, i don't have these problems. i just can't change boot animation.
previous: LC1 with CF-Root for LC1
current: LPY with CF-Root for LPY
4 me LPY and CF is working great. There was no problems on flashing LPY nor the CF-.
Ps. Battery life is so good with ICS vs GB.. I used to get 14h via GB and had to put it to charge (medium usage) and with ICS i have been running on battery 20h36min and still got 39% battery. (3g/HSDPA+ on all the time and email syncs and Gps)..
And screen mode Dynamic and brightness around 35%...
Never gona go back to GB..
No problems for me. Its all cool.
In fact wifi on mine is mad - its giving me a rock solid connection over a much wider range than i had on the Chinese repack version.
Fully rooted ICS here (CF-Kernel). No problems so far. Flashing was smooth apart from some self-inflicted problems which caused the loss of my data. Luckily I had a backup
dont see hwat the big fuss is about to be honest. sure, a few people have had major problems, but that is just a couple out of a community of several thousand. Sure it sucks for thoose who have had problems, but its a very small minority.
back to the op, yes i am sticking with it
No problems with CF here too... expect that it didnt automatically install S note which it did on the first boot up on stock ICS without CF root.
Did anyone else have a missing S note after mobile odin flash?
uva2212 said:
No problems with CF here too... expect that it didnt automatically install S note which it did on the first boot up on stock ICS without CF root.
Did anyone else have a missing S note after mobile odin flash?
Click to expand...
Click to collapse
I installed cfroot kernel with LPY simultaneously. I had to reboot twice for the "installing apps" message to appear. But it installed snote fine. I did full wipe. Flashed thru mobile odin pro
No problems with CF here too... expect that it didnt automatically install S note which it did on the first boot up on stock ICS without CF root.<br />
Did anyone else have a missing S note after mobile odin flash?
Click to expand...
Click to collapse
Really? That's interesting, S Note installed with a few extra applications on start-up. I used Mobile Odin with the untouched LPY.
Sent from my GT-N7000 using xda premium
Im currently running LPY everooted with mobile odin. I am however NOT using the CF Root kernel at this moment in time.
Well i had not wiped, so maybe that is why the issues were faced.
Thanks to Dr. Ketan, I tried the other method that gives a stock LPY root permissions without adding CWM. so ill have to flash that manually whenever i see custom roms or need a backup.
But for the moment the objective has been met... rooted to use titanum backup, SetCPU and Adfree... works for me.
with SetCPU i am able to address my battery drain to quite an extent..atleast the standby has gone up tremendoously compared to the first 2-3 hrs before SetCPU install.
for those looking for the alternative method given by Dr. Ketan, click here
Well I am on LPY with CF Kernel at the moment via the Mobile Odin method, but I'm suffering with worse battery life than Ginger Bread.
Is there anything I can try to remedy this?
Also, what are the steps I need to take if I want to go back to Ginger Bread? Can I use Mobile Odin?
Thanks
never flashed cf_root in the first place, what does it even do?
well, I just got rid of cf rooted kernel,
my flashing history is as follows:
Updated the note when I bought it 4 weeks ago with OTA to LC1
then rooted phone using abyss Kernel using abyss 4.2 and ended up with root
and a yellow triangle and flash count 1.
I used the note with LC1 for 2 weeks, then flashed Cyanogen 9 V3 -V7.
while I was on Cyanogen, I purchased Triangle away and worked like a charm resitting the flash count back to Zero and got rid of the yellow triangle.
when official ICS was released, I purchased mobile Odin and flashed with keeping root to ICS LPY.
then did a Wipe to data and delvick Cache using stock rom manager with no problems.
after that I restored all my apps using titanium back up.
then using Mobile Odin I flashed CF LPY kernel.
did couple backups but never restored. then horror stories started emerging and scared the hell out of me, so I have been contemplating getting rid of CF kernel ever since.
I took the plunge 10 minutes ago with total success.
here is what I did:
I unfroze all system apps that I have frozen.
Made sure that there was no apps were running.
put the phone into airplane mode and no wifi.
flashed the official LPY rom on top of the old keeping everything ticked.
all went well and took around 2 minutes.
Now I have official kernel with ever root, still being able to use titanium backup to freeze and back up my apps and have no adds running.
Hope this help someone who is worried for having the CF LPY kernel.
Cheers
I'm sticking with it for now, but I don't seem to have full root (cannot delete files in system/apps) but I do have root enough for things like Titanium. Does anybody know if this is normal?
Sent from my GT-N7000 using XDA
pezx44 said:
I'm sticking with it for now, but I don't seem to have full root (cannot delete files in system/apps) but I do have root enough for things like Titanium. Does anybody know if this is normal?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Just tried with root explorer, clicked on Mount R/W and I was able to delete facebook apk with no issues.
Barracuda77777 said:
Just tried with root explorer, clicked on Mount R/W and I was able to delete facebook apk with no issues.
Click to expand...
Click to collapse
Thanks for the reply. Guess something went wrong somewhere along the line. I haven't tried with root explorer (been using es file explorer with root option checked) but I don't want to derail this thread. I guess it's time for me to figure out where things broke down!
Sent from my GT-N7000 using XDA
I flashed LPY over stock GB rom (UK CPW 2.3.6) and the update went really well and I have rooted. It is working fine only comment I would make is that the resulting touchwiz launcher seems a bit laggy and I have been afraid to do a wipe after all of the hype about CWM. I am staying with ICS LPY though.
Related
Hi guys, I really need some help. Every ROM I install gets this weird display problem. It changes the screen to like 4-bit color, and sometimes just blue, and sometimes red. I tried almost all ROMs i can get my hands on, and they all do the same.
I'm really new at this and here are the steps I have taken to root my phone and install the ROMs:
I followed this guide to install GOT in my milestone. I purchased my Milestone online, so I wasn't sure it's origin. It says EMEA in my About Phone page, so I went with the G.O.T RETAIL EUROPE (RTEU) version. I was stuck in one of the steps in the recovery mode where I have to apply the update.zip to get into OpenRecovery. It greeted me with the an error message. I did some googling and found out it might have something to do with the vulnerable recovery. So i downloaded it and flashed my phone. Somehow, that worked. I have used the G.O.T thing for about a day and decided to install the ROMs. First, I deleted the G.O.T Openrecovery file from the sd card and copy the ANDROIDIANI files into sd card. I also did the wipe dvlivk/data/cache before applying the ROM. And the clock speed is in default.
What did I do wrong?? Any help will be greatly appreciated.
Here's how screen looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you'll be answered shortly..
may I suggest you to flash stock rom.. from the following link
http://and-developers.com/sbf:milestone
choose your area & try..
hope this will help
Thanks for the respond. I forgot teo mention that the 2.2.1 G.O.T SBF that I flashed with does not have this problem. But it presents in all the different ROMs that i have tried. This is so weird. Anyone have any idea of what might cause this problem?
I'm sorry to bring up this post, but I can barely use my phone because of this problem. I desperately need help with this. My english is not very good. Can someone please provide the correct words to describe my problem. So i can do some proper google search and hopefully, it will come up with something.
if by spf you are not having this problem, true?
then, can you give us an example of one rom you used that creat this problem?
I tried the Froyo Mod, Cyanogen Mod, Cronos Mod, MIUI mod and HoboMod. They all have the same problem. =(
I still can't a solution to my problem yet. Any help will be greatly appreciated.
So just to be sure... it runs fine on a stock rom right?
Most roms when they install they are overclocked.
Did you try setting the clock back to 550mhz after installing one of these roms?
Also, maybe one of the new leaks will work for you.
that's weird, sorry but I can't help
Really weird. You can try to do all again. Put the original SBF file and the using ANDROIANI openrecovery put a Ho!no nandroid or other system with a nandroid archives.
njmata said:
Really weird. You can try to do all again. Put the original SBF file and the using ANDROIANI openrecovery put a Ho!no nandroid or other system with a nandroid archives.
Click to expand...
Click to collapse
Thanks for the reply. I'm going to try that now.
I'm trying to get the original sbf from this page. http://and-developers.com/sbf:milestone
The thing is that I live in the US and I got mine from Newegg.com. Which one should i download??
EDIT: What is the difference between service and non service?
Never have that problem. Maybe should flash back to stock to see if hardware problem.
It works fine with the stock ROM and the GOT SBF. And with anything else, I will get that stupid screen. =( This is so weird. I have flashed back to stock ROM. And now, how do I install HO!NO!? I can't seem to get into the Open Recovery with the Stock ROM. Any help please??
EDIT: When every time I install a new ROM, I don't get that problem until like after 10 minutes when I installed a bunch of apps. Could it be the apps that I installed that caused that problem??? But it's the same apps that i run in the GOT SBF.
which apps are you applying?
try adding by group, or left out any game (can be a problem).
Are the apps ready for your phone? perhaps some app is for other phone and works bad in MM.
Yo mention that applying the ROM works UNTIL applying apps, so it is very possible that some app is not for your hardware or need some special feature from display.
zeppelinrox said:
So just to be sure... it runs fine on a stock rom right?
Most roms when they install they are overclocked.
Did you try setting the clock back to 550mhz after installing one of these roms?
Also, maybe one of the new leaks will work for you.
Click to expand...
Click to collapse
Did the OP try this...it seems like the most likely explanation.
Your phone could be very bad at overclocking. My first milestone was, but it didnt experience these exact symptoms.
Try flashing a rom and downclocking it to around stock (550 or 600).
Your phone could be fine until it heats up due to the 3g/wifi being used. Combine this with the added heat of upped vsels €nd you have general weirdness.
Sent from my Milestone using Tapatalk
I have this exact same problem - when I used the stock rom on my hong kong milestone and overclocked modestly (800 52vsel) I was fine. As soon as I installed my first rom (in my case Shadowmod 2.5 via update.zip from AOR 3.3) I had this problem. It happens most often when the keyboard is open.
In additon to the screen yellow/red colour problem it will also just go blank, while the touch buttons stay lit. For either problem, simply turning the screen off and on again using the power button clears it, so it is more annoying than a show stopper.
Now I am using the APAC jan 25 leak and still have the issue. I only used an sbf to install the vulnerable recovery, and have used nandroid/updates to install everything else (never used the GOT thing). SBFs are annoying for me as I have a mac.
Anyway, I plan to recover my stock 2.1 nandroid and see if the problem is still there. Too bad, I love the battery life of the 2.2 roms, and the apps2sd native as well.
Sent from my Milestone using XDA App
Lleviathan said:
I have this exact same problem - when I used the stock rom on my hong kong milestone and overclocked modestly (800 52vsel) I was fine. As soon as I installed my first rom (in my case Shadowmod 2.5 via update.zip from AOR 3.3) I had this problem. It happens most often when the keyboard is open.
In additon to the screen yellow/red colour problem it will also just go blank, while the touch buttons stay lit. For either problem, simply turning the screen off and on again using the power button clears it, so it is more annoying than a show stopper.
Now I am using the APAC jan 25 leak and still have the issue. I only used an sbf to install the vulnerable recovery, and have used nandroid/updates to install everything else (never used the GOT thing). SBFs are annoying for me as I have a mac.
Anyway, I plan to recover my stock 2.1 nandroid and see if the problem is still there. Too bad, I love the battery life of the 2.2 roms, and the apps2sd native as well.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
Wow I thought I was the only one with this problem. I have been testing with different kernels and ROMs. Well, basically every ROM posted on this forum, and the new and old kernels. I have also tried the leaked 2.2.1 sbf as well as the offical 2.2.1 release SBF(UK and EU version). Played with different clock speeds. They all have the same issue. The only thing that doesn't have that issue are the original 2.1-update1 and the GOT sbf. I'm using GOT sbf so I could use app2sd, but the battery life is absolutely horrible.
development stopped
Selling phone
FOR TESTING AS I DO NOT HAVE REPLACEMENT PHONE SENT TO ME YET
Based on 03D gingerbread. Heavily themed with a stock like look... just does not have a stock LG look.
This is not my first rom. I have modded and/or ported roms for the x10 and the motorola bravo. I am slowly getting used to lg files.
This rom is a diet of the original with some tweaks. Thanks to all the other developers in the thrill and o3d Roms. My base file is used gingerbread 21a with some parts of framework from THAIZ (used mainly for battery step xml. It is overclocked with THAIZ kernel and picked up on some modding tricks from several developers. You can use most gingerbread kernels from 03D with this rom. I will add miscellaneous files to be added later i.e. games, and apps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Must have cwm recovery to install and already be on the gingerbread baseband or Gingerbread 03D rom from kdz. Tutorials for gingerbread are in the development section of 03d and thrill. This install does not erase data so you may have to manually erase in recovery menu depending on what rom you come from. PLEASE USE APN BACKUP AND RESTORE IN MARKET BEFORE INSTALLING
Just put in sdcard and install as zip in recovery.
Widgets and other files that can be installed by market are not included in rom.
I am not responsible for what you do to your phone. Use at your own risk.
Rom download
http://hotfile.com/dl/137107632/79c3607/GB_P920.zip.html
want your 3d games than just install this in recovery
Not uploaded yet
GB P925
removed tons of apps
apn backup and restore to restore your apn (please back it up before install)
sony ericsson wallpaper and picker
Ultima battery notifications 1%
tons of changes to icons and appearance
looks like a new phone
removed lg home (used Arc Launcher)
astro file manager
xda app
many .png files I made myself from original .png files
3d game converter
SONY BRAVIA ENGINE
removed apps that can easily be downloaded from market
made some modifications and tweaks to make it snappier and faster. Give me some time and I will do some other mods to it, maybe make a new lockscreen and stuff. I haven't had the phone very long.
upload is done
http://hotfile.com/dl/135976654/a6670ad/GB_P925.zip.html
whats working/broken? want to give my co-worker some GB love, but hes afraid of the "beta" tag
Give me one more day and the beta tag will be done. Only not working is 4g but 3g is pretty fast... i get similiar download and upload speeds
Just have to do some minor cosmetic changes....
Im going to release a o3d version and a thrill version
nickL0V3 said:
whats working/broken? want to give my co-worker some GB love, but hes afraid of the "beta" tag
Click to expand...
Click to collapse
Sent from my LG-P925 using XDA App
Uploading rom... please try and leave some feedback
Sent from my LG-P925 using XDA App
Can you post up a link to the GB baseband for the Thrill? I went perusing around the O3D forum and didn't see it there.
Thanks in advance.
kiltedthrower said:
Can you post up a link to the GB baseband for the Thrill? I went perusing around the O3D forum and didn't see it there.
Thanks in advance.
Click to expand...
Click to collapse
Sadly its not out anywhere yet :-/ we have to wait for a leaked p925 GB or better yet an official release from ATT to get it.
Sent from my LG-P920 using XDA App
AeRo0 said:
Sadly its not out anywhere yet :-/ we have to wait for a leaked p925 GB or better yet an official release from ATT to get it.
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
I find it to be pretty much bs that GB is out yet to get official ATT update we have to wait for them to dumb down the system and add their bloat. I probably wont even update to it when it comes out i will just flash baseband and keep this euro open version, much nicer not being restricted.
...fighting ninjas at night. Talking about this and that.
Urabewe said:
I find it to be pretty much bs that GB is out yet to get official ATT update we have to wait for them to dumb down the system and add their bloat. I probably wont even update to it when it comes out i will just flash baseband and keep this euro open version, much nicer not being restricted.
...fighting ninjas at night. Talking about this and that.
Click to expand...
Click to collapse
Lol that's what I'll probly end up doing too I just meant that official is usually better than a leak
Sent from my LG-P920 using XDA App
bugs?
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Did you install new baseband?
mafiadesi said:
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Click to expand...
Click to collapse
Sent from my SGH-I997 using XDA App
well i used this method to install the original files
http://forum.xda-developers.com/showthread.php?t=1287236
i just assumed that this installed the new gingerbread baseband. when i finished the process, it said everything was successful. am i missing anything?
---------- Post added at 04:13 PM ---------- Previous post was at 03:24 PM ----------
i guess something went wrong with the kdz steps.
i redid it, but now im having a problem rooting with superoneclick. im using super one click v.1.9.5.0. is there some newer one i should be using??
cuz it gets stuck on "running psneuter" and it wont root
thanks!
mafiadesi said:
well i used this method to install the original files
http://forum.xda-developers.com/showthread.php?t=1287236
i just assumed that this installed the new gingerbread baseband. when i finished the process, it said everything was successful. am i missing anything?
---------- Post added at 04:13 PM ---------- Previous post was at 03:24 PM ----------
i guess something went wrong with the kdz steps.
i redid it, but now im having a problem rooting with superoneclick. im using super one click v.1.9.5.0. is there some newer one i should be using??
cuz it gets stuck on "running psneuter" and it wont root
thanks!
Click to expand...
Click to collapse
There is a newer version 2.2, I used it to root my again.
Sent from my LG-P920 using XDA App
yup! new 2.2 version did the trick!
thanks guys!
mafiadesi said:
super fast and nice looking rom!
just a few things (not sure if they're bugs or just something im doing wrong):
1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
2. i cannot download some programs via market. its says "your device is not compatible with this item"
someone PLEASE, quickly help me with this....the market, i'll survive with...the network not working will only last so long...im going to have to leave the house sometime....
thanks!
Click to expand...
Click to collapse
Do you have the gingerbread baseband?
i'm wondering what tweaks need to be applied to the o3d rom to make it stable on our thrill.
I'm happy with King 3D except I have a wierd battery issue. When I reboot the device, i lose 30% of my battery and have to recharge. It seems like a software issue because on stock roms that issue doesn't happen.
King 3D is an 03D rom, so im thinking its something slightly different, perhaps you've cracked it.
I don't know what he did to tweak his Rom.. Probably a memory leak causing it
Sent from my SAMSUNG-SGH-I997 using XDA App
Hello guys,
I am having the same problem as mafiadesi: I HAVE NO PHONE OR MOBILE NETWORK CONNECTIVITY. AND ALSO, MY HOME SCREEN AND ALL THE SCREENS DOES NOT SHOW THE NOTIFICATION BAR.
"1. i have no network connection. im an AT&T customer, but im not getting any signal or data. when i go into the APN setting area, it says "reorganizing internal processes. please try again after a short while."
This is what I did, I restored my Thrill to the Android 2.2 stock, and then I used this method on
http://forum.xda-developers.com/showthread.php?t=1343915
It worked fine to get to the stock android 2.2.
Then i used his step 23 to install the O3D ROM. It looked okay, but it had no mobile connectivity neither.
"23. Boot into CWM recovery and wipe data/factory reset, wipe dalvik cache, install zip from sdcard, choose zip from internal sdcard, select Rom. Reboot system and enjoy."
I used the GB_P920.zip to get to the O3D rom.
So, I repeated the method to go to new GBP925 using the same method, and like I said, the cellular modem or radio and the notification is not showing.
PLEASE TELL ME WHAT I DID WRONG, AND WHERE I COULD FIND THIS BASEBAND, AND HOW TO INSTALL IT, IF YOU THINK THAT IT IS MISSING.
THANK YOU SO MUCH.
Maybe try the kdz method first.
Sent from my LG-P925 using XDA App
Hi
Thanks for the quick reply. I just tried the KDZ method of this site:
http://forum.xda-developers.com/showthread.php?t=1287236
I used the V21A_00.kdz file ... and I had no error messages that I could noticed,... It finished the upgrade, and then the phone rebooted and stayed on a loop, with teh LG logo and the lg animation... I tried removing the battery and but now it is stuck on this loop boot.
I tried the recovery mode, (Vol - + Power button) and it goes to the Android recovery, and no longer the CWM recovery. The only option now is the to errase all data. But even that option is not available.. the Power button option to say Yes does not respond, so the only option is the pull the battery.
I am stuck.. please help me. any ideas?
I am thinking about going back to Stock 2.2, if i can do that.. i will try it now.
This is based on the official 4.5.2A-51_OLL-17.8 firmware (its the 2.3.6 Bell rom) and will work with both INTL & AT&T users. Most of the Blur apps have been updated in this version with new looks and features. The Camera on this version is really good. Takes much better images then any of the other BlurCamera's I have tried. Also the gallery is a huge improvement over the older ones, looks much better and a lot faster. Plus as this is the Bell firmware it hasn't got all the AT&T menus in the settings.
The only changes I have made is removed the bundled Bell apps plus added a few tweaks that I see as a must as it fixes or addresses issues that people have with the default Atrix software.
If anyone wants to fork this and add extra features please feel free to do so. You do not need to ask me before hand. I am even willing to host the ROM if you have no where to store it. So if you feel you can improve upon the ROM please do.
Changes Made:
The ROM is SuperCharged.
Its Rooted and has Busybox installed.
Fully DeOdexed and zipaligned
No changes made to the theme so no more disappearing status bar.
1080p video recording and 5 finger multi touch.
Raindrop Fix
Beats Audio + XLound
Bravia HD Mobile
Jug6 Battery FIX + tweaks I have made. Gives the best battery performance of any Blur ROM when set to 1.0 GHz.
Improved AGPS
Adblocker
faux123 026 1.45 GHz kernel with a CPU app to under-clock it for even better battery life.
Using the CM7 APN list. AT&T users that are having data problems try this.
Due to this only having a few locales I have added MoreLocale 2 so you can select your language. I'm from the UK and its not one of the locales that is listed in the blur setup. It can be set to English UK, its just a bit of a pain setting up as you need to skip setup, select MoreLocale 2 and put in en GB and then run blur setup. But you only need to do this once. So its not a huge deal. This also goes for anyone else that haven't got their locale listed. Just skip the blur setup and select MoreLocale 2 and select your locale.
Root Uninstall is also added so you can easily remove system apps you don't want. Its also a pretty nice app to manage your normal installed apps.
You install this like you would with any other ROM. Make sure you have a fairly well charged phone before attempting flashing this. Because this also comes with the webtop it does take awhile to install.
*NEW* [Dec 10] Vanilla Download: 423 MB
http://tinyurl.com/vanilla-stock-blur-webtop
MD5: 6e08268f5798123664f9ec4b15d7bfd1
Wish/To-do list:
LS HDMI
WebTop over HDMI
HDMI Mirroring
Toggles in notification bar - Can now be added with this zip.
Multilingual in blur setup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IF YOU GET A BOOTLOOP PULL THE BATTERY AND REBOOT.
will this work for att guys too?
looks good
any way to make the luncher with 4 rows instead of 5?
miko85 said:
will this work for att guys too?
Click to expand...
Click to collapse
Unsure if it will work as is, but if you install the ATT kernel from here after flashing the ROM it will work then.
wow makes sense im back to nottach right now been on miui and cm9 for so long i forgot how to work factory **** i will reply back after flashing thanks for your work
I had stock 2.3.6 on my bell atrix when I first rooted my phone back in February???
ATRIXXIRTA said:
I had stock 2.3.6 on my bell atrix when I first rooted my phone back in February???
Click to expand...
Click to collapse
I am from the UK. We haven't seen a 2.3.6 update. We could get 2.3.6 working with a custom kernel but I had problems with random reboots and calls getting cut off. It also had really bad battery life and over heated often. But this version is using the new bell kernel that was only released a few weeks ago here and I haven't had any of them issues since I have been using it.
The bell kernel is the first official kernel that will work for international users on 2.3.6
When I was on 2.3.6 my battery life was ****!! lol
Hopefully the kernel in this build is better then the one that came with the bell 2.3.6 update back in feb
I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first :-(
Sent from my MB860 using xda premium
EDITED
Does it contain polish language?
pinguy1982 said:
Unsure if it will work as is, but if you install the ATT kernel from here after flashing the ROM it will work then.
Click to expand...
Click to collapse
Works great !!!!!
Thanks, i have had many reboots with nottach4g and none now
Sent from my SGH-T989 using xda premium
i flashe this ROM like Nottach ROM ?!
OP..........Might want to change the thread title to reflect this has the 2.3.6 webtop and not the "new webtop", as some people may think it has Webtop 3.0 from the upcoming ICS update.
decker39 said:
I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first :-(
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
nevermind
wobo said:
Does it contain polish language?
Click to expand...
Click to collapse
Yes.
CaelanT said:
OP..........Might want to change the thread title to reflect this has the 2.3.6 webtop and not the "new webtop", as some people may think it has Webtop 3.0 from the upcoming ICS update.
Click to expand...
Click to collapse
Who in there right mind would think this comes with Webtop 3.0? Webtop 3.0 is just ICS in tablet mode. This is GB so would never be able to run Webtop 3.0. Also I give the version number of the Webtop in the OP. This is the latest webtop for GB.
Saying this is Webtop 2.3.6 means nothing. The latest Bell firmware that is 2.3.6 is running an older version of webtop. That version comes with Firefox 7.
decker39 said:
I've got a UK Atrix and tried to install this 3 times earlier, just stays on the unlocked screen, i waited 20 mins before i did a battery pull. Come from CM7, and did all of the neccessary wipes first
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Try wiping dalvik cache or re-downloading. Could be a bad download.
capercb said:
nevermind
Click to expand...
Click to collapse
What's that supposed to mean ??
Sent from my MB860 using xda premium
decker39 said:
What's that supposed to mean ??
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i was having the same problem as you . try everything and still nothing ...i tried twice and nothin ..thats all
I think its likely that this is in fact NOT stock 2.3.6 but just a striped down version of the 2.3.6 Nottachtrix rom. i'm pretty sure that stock 236 doesn't have the toggle in the notification area. and in the first post for this rom it says based heavily on Notatchtrix.
I have tried EVERY rom, available for attrix in every flavor flashing multiple time to try to achieve stability and maximium hacability and performance. i think i'm sad to say i'm at the end of my tether as this place were all searching for just doesn't exist.
I regularly return to the only real rom to supply true stability and regular performance. 2.3.4 international ram fix.
On top of this not being a true stock rom. it's not perfect and i wish i could have some of the features of notachtrix but without the reboots and un-reliable behaviour.
I think the sun is most likely setting on our beloved Atrix. this may well not be the case for some US users. I wouldn't even mind being able to get hold of the TRUE stock SBF for my handset which i know just isnt available i have tried two orange sbfs that are in circulation and neither are quite right. 2.1.1 and 1.3 something.
We all need to appreciate that Nottachtrix is pretty much as good as it gets for us and if your after stability then use 234! simple.
i invite the opinion of others who consider me wrong!
Hi installed this rom got unlock screen hang so flashed 2.3.6 kernel works now but me fingerprint reader is not work can anyone help?
hello everyone,
please post the problems here i try everything to get you guys out of trouble!
do not spam the cm9 thread spam here
i read sometimes here since today that some users had brick there tablet by installing the new cwm 6.0.1.2 or the CM9
the problems are:
# cwm version broken
# the 3.1 kernel is broken
after you have flashed one of these things your tab will stay black!
we still sourcing for a solution
kallt_kaffe's tab is also bricked lucky my tab is still alive!
very sadly for alk the peoples that have bricked there tablet and kallt_kaffe good luck i hope you can get your tab up and running again!
#YOU HAVE BEEN WARNED#
support
SUPPORT:
we have not found any working solutions yet as we have found one you will hear from me
maybe this will work: http://forum.xda-developers.com/showpost.php?p=31166314&postcount=3
or this maybe: http://forum.xda-developers.com/showthread.php?t=1478361
ALWAYS FEEL FREE TO PM ME!
or message me:
[email protected]
[email protected]
you might want to change the title.
bricks brick support? lol
would be great it getting bricked would get bricked and bricking your tab would no longer be "supported"
pseudoheld said:
you might want to change the title.
bricks brick support? lol
would be great it getting bricked would get bricked and bricking your tab would no longer be "supported"
Click to expand...
Click to collapse
haha yes im using swype on my tablet so there went something wrong i think
CHANGED!
i flashed the latest error prone cwm and luckily didn't have any issues. now im contemplating flashing back the old one 6.0.0.8 i think but i don't want to risk getting a brick whilst flashing back the old cwm.
does the brick only occur when formating something? is there any further info on that.
i think i will just keep my tab running as it is for the time being until there really is the need to flash sth (ie ics 7300 coming out) then i will try and go back to the old cwm
pseudoheld said:
i flashed the latest error prone cwm and luckily didn't have any issues. now im contemplating flashing back the old one 6.0.0.8 i think but i don't want to risk getting a brick whilst flashing back the old cwm.
does the brick only occur when formating something? is there any further info on that.
i think i will just keep my tab running as it is for the time being until there really is the need to flash sth (ie ics 7300 coming out) then i will try and go back to the old cwm
Click to expand...
Click to collapse
you can just flash back from 6.0.1.2 i have also done that now running on 6.0.0.8!
now i need some sleep see ya tommorow guys!
i have problem after using cm10 preview and the cmw from kallt_kaffe thread , it's probably cmw that caused the problem because JB was running smooth without any issues but when i tried to restore the stock HC the cmw stuck for some time but i was able to return back to HC .
after this the device was lagging a lot and couldn't enter cmw again the screen was black but the device still wasn't dead , i managed to turn it off and reboot it again and used it for two days before it's completely dead and connects only as APX device, i will try you the first method you posted and post back here .
there also this method form tab 10.1 sections for the unlocked devices: http://forum.xda-developers.com/showthread.php?t=1130574]
my device is locked and can't Bass (rcm version 0x4) error . so if there is anyone can help figuring out or providing the secure boot key for the locked devices that will be great .
Im not really sure what makes this bugs happen..
But this issues is not new for me in galaxyNOTE gt n7000 and Sgs2 I9100 we call this as EMMC superbrick..
It happen in ICS kernel stock if you operates some EMMC_CAP_ERASE in kernel such as wiping your data or system.. Format.. Or deleting large file in recovery operation or factory reset in EMMC with firmware revision 0x19(firmware of this chip)..
It cannot recover with regular utility like JTAG coz This superbrick makes EMMC faulty in /data partition or /system partition blocks..
If you go to Samsung Service Centre.. Your device should be on mainboard replacement..
Sorry for my english.. You could use this app for testing your emmc has a bug or not..
If you had the emmc bug.. Dont use any recovery from ICS sources until someone with expert knowledge confirm that everything is fine..
Please read this thread for complete issues and discuss..from recognized developer entropy512
http://forum.xda-developers.com/showthread.php?t=1633938
Edit:
After testing i got my EMMC had a bugs warning from chainfire got brick bug app...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tested my tab apparently it got the bug too. So, have anyone know what the problem exactly? Is it the ICS kernel or CWM which causing the brick?
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
Is it safe to flash KK's CM10 ROM cause it still using GB kernel? And what CWM version to use for flashing? I know CWM versions 5. cannot use to flash CM10. Thanks
nexus_g said:
I've tested my tab apparently it got the bug too. So, have anyone know what the problem exactly? Is it the ICS kernel or CWM which causing the brick?
---------- Post added at 02:26 AM ---------- Previous post was at 02:21 AM ----------
Is it safe to flash KK's CM10 ROM cause it still using GB kernel? And what CWM version to use for flashing? I know CWM versions 5. cannot use to flash CM10. Thanks
Click to expand...
Click to collapse
Use CWM 6.0.0.8 NOT CWM 6.0.1.2!
You still have the 2.6.36.4.... Kernel Yes I know You can just upgrade to cm10 no problem!
nexus_g said:
I know CWM versions 5. cannot use to flash CM10. Thanks
Click to expand...
Click to collapse
I can't recall reading that before... What happens if you would do so?
Kallt_kaffe is currently recommending 6.0.0.8, post 2 of cm9 thread.
I heard of changes in the nandroid backup file structure in 6.x that I don't like, personally, but that's IMHO I'm still on 5.1 because the menu structure of 5.5.0.4 is incomplete (e.g. no shutdown)
fred_be9300 said:
I can't recall reading that before... What happens if you would do so?
Kallt_kaffe is currently recommending 6.0.0.8, post 2 of cm9 thread.
I heard of changes in the nandroid backup file structure in 6.x that I don't like, personally, but that's IMHO I'm still on 5.1 because the menu structure of 5.5.0.4 is incomplete (e.g. no shutdown)
Click to expand...
Click to collapse
From what I remember from the cm10 or AOSP JB thread, somebody tried to use cwm 5. to flash cm10 and he was getting error massage and cwm won't let it flash. That is why persoot and KK recommend cwm 6.
Could someone confirm using the good old CWM 6.0.0.8 or below and has flash ICS kernel and do wipe recover and survive the brickbug? Thanks.
safariking said:
you can just flash back from 6.0.1.2 i have also done that now running on 6.0.0.8!
now i need some sleep see ya tommorow guys!
Click to expand...
Click to collapse
Could you tell us what is the best way to flash back to CWM 6.0.0.8? Do you use cwm 6.0.1.2 or Odin? Thanks
nexus_g said:
Could you tell us what is the best way to flash back to CWM 6.0.0.8? Do you use cwm 6.0.1.2 or Odin? Thanks
Click to expand...
Click to collapse
I have flashed CWM 6.0.0.8 from 6.0.1.2!
So, yesterday I flashed Cynogenmod 11.0 on my Kindle Fire HD 7. After sometime I noticed that the left speaker isnt working at all. Right one is working fine. I tried to Reset and Flash again, but nothing is helping.
I have some other issues with the new ROM, but this one is major.
Thanx,
adnanbhatt7
adnanbhatt7 said:
So, yesterday I flashed Cynogenmod 11.0 on my Kindle Fire HD 7. After sometime I noticed that the left speaker isnt working at all. Right one is working fine. I tried to Reset and Flash again, but nothing is helping.
I have some other issues with the new ROM, but this one is major.
Thanx,
adnanbhatt7
Click to expand...
Click to collapse
CM11 is in it's infancy still. If this is not an issue with 4.3 ROMs I would just post a note in Hashcodes thread and drop back to 4.3 until there are some updates so things work better. I didn't have that issue but all hardware is not made equally.
LinearEquation said:
CM11 is in it's infancy still. If this is not an issue with 4.3 ROMs I would just post a note in Hashcodes thread and drop back to 4.3 until there are some updates so things work better. I didn't have that issue but all hardware is not made equally.
Click to expand...
Click to collapse
Thank you for the reply, one more thing. Videos doesn't work as they used to on Stock ROM. And the system crashes frequently. Are the previous versions more stable?
Can suggest me a ROM? I use Kindle for Internet and Movies, suggest me a ROM accordingly.
Thanx again.
adnanbhatt7 said:
Thank you for the reply, one more thing. Videos doesn't work as they used to on Stock ROM. And the system crashes frequently. Are the previous versions more stable?
Can suggest me a ROM? I use Kindle for Internet and Movies, suggest me a ROM accordingly.
Thanx again.
Click to expand...
Click to collapse
I use 4.3.1 JB CM10.2 (recently refreshed) http://forum.xda-developers.com/showthread.php?t=2388341 I also use 3.99 Paranoid Android 4.3 JB. http://forum.xda-developers.com/showthread.php?t=2270831 Those are the two I use but I can't suggest a ROM directly to you or the mods will not like it. The best I can say is read through the topics before deciding on a ROM and see which ones are still having some heavy beta testing. http://forum.xda-developers.com/kindle-fire-hd/7-development
Edit: Goo.img is still getting their servers straitened out so downloads from there can be corrupted and not flash. For now, look for crackflasher mirrors in OP's or a download option from some other cloud/server.
LinearEquation said:
I use 4.3.1 JB CM10.2 (recently refreshed) http://forum.xda-developers.com/showthread.php?t=2388341 I also use 3.99 Paranoid Android 4.3 JB. http://forum.xda-developers.com/showthread.php?t=2270831 Those are the two I use but I can't suggest a ROM directly to you or the mods will not like it. The best I can say is read through the topics before deciding on a ROM and see which ones are still having some heavy beta testing. http://forum.xda-developers.com/kindle-fire-hd/7-development
Edit: Goo.img is still getting their servers straitened out so downloads from there can be corrupted and not flash. For now, look for crackflasher mirrors in OP's or a download option from some other cloud/server.
Click to expand...
Click to collapse
Thank you again.
I Flashed the 4.3 now, but same issue. So I went back to the Stock Amazon OS. But it didnt fix it either, I think its a hardware problem. I followed many Discussions about problem, But havent found a Solution yet. Sadly, I cant get a Replacement besause the Warranty is over.
I just want to know what caused this? FACTORY cable?
Try finding a place whers they sell the speaker and replace it. Its fairly easy to take kindle apart... Ive done it just to get the experience in case i needto replace something
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304
adnanbhatt7 said:
I Flashed the 4.3 now, but same issue. So I went back to the Stock Amazon OS. But it didnt fix it either, I think its a hardware problem. I followed many Discussions about problem, But havent found a Solution yet. Sadly, I cant get a Replacement besause the Warranty is over.
I just want to know what caused this? FACTORY cable?
Click to expand...
Click to collapse
You can try going back to bone stock with no root and let Amazon update to 7.4.6. A complete factory reset is one of the better ways to fix bugs. Not just using a restore tool but full restore. I had a glitch like that one time. Other than that, perhaps you do have a weak speaker or a loose wire.
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
south956 said:
Try finding a place whers they sell the speaker and replace it. Its fairly easy to take kindle apart... Ive done it just to get the experience in case i needto replace something
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304
Click to expand...
Click to collapse
Can I buy a speaker online?
If yes, then can you send me then Link from where I can buy one.
LinearEquation said:
You can try going back to bone stock with no root and let Amazon update to 7.4.6. A complete factory reset is one of the better ways to fix bugs. Not just using a restore tool but full restore. I had a glitch like that one time. Other than that, perhaps you do have a weak speaker or a loose wire.
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
Click to expand...
Click to collapse
If I do that, I mean back to stock with no root and update to 7.4.6. Will I be able to root again and Flash a Custom ROM afterwards?
And whats the procedure to do that (back to bone stock). I did a factory Reset yesterday also, but Kindle was still having Root.
adnanbhatt7 said:
If I do that, I mean back to stock with no root and update to 7.4.6. Will I be able to root again and Flash a Custom ROM afterwards?
And whats the procedure to do that (back to bone stock). I did a factory Reset yesterday also, but Kindle was still having Root.
Click to expand...
Click to collapse
Yes, you can do everything you normally could to it again but if that doesn't fix problem i found a posting for speaker here
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304
adnanbhatt7 said:
If I do that, I mean back to stock with no root and update to 7.4.6. Will I be able to root again and Flash a Custom ROM afterwards?
And whats the procedure to do that (back to bone stock). I did a factory Reset yesterday also, but Kindle was still having Root.
Click to expand...
Click to collapse
Sure you can. Removing root does not remove the little super user app even though your table no longer has root. Use the same binary tool you rooted with. Here's a video Arash did that can help you a bit https://www.youtube.com/watch?v=CpN6f0OqX3s
Thank you both of you. Its fixed now. Here is what I did, I simply opened the back cover to see how the speakers were connected and will I be able to Replace one myself or not. I played a music track to see if both the speakers of One side were working or just one. The moment I played a track I noticed that the volume was somehow increased. So, I cheked all the speakers one by one, and they all worked just fine.
I dont know what solved this, maybe wiring was lose or someting. I was lucky I guess
Thanx Both of you again.
But I still think that the Volume of Left speakers is low as compared to Right speakers. I will still Unroot My Kindle and Restore it to Factory settings just to be sure. And if evryting went well, I will Flash Kinnoloy tomorrow.
Now i have this problem with right, thankfully i got 2 kindles..... Also an offtopic suggestion, seems buying a broken digitizer screened kindle is cheaper than buying motherboard.
For your own custom Sig : http://forum.xda-developers.com/showthread.php?t=1922304