hi, my galaxy mini turned off itself and restarted, but my lockscreen button wont work anymore, and now my only starts up when I connecgt it to my laptop with a usb cable, but it turns off every time after e few minutes and now i want to flash
stock gb rom 2.3.4 but I can't enter download mode because my lockscreen button doesn't work anymore
i'm using miui gb rc1 rom
if someone can help me please do! thx
yusisushi said:
hi, my galaxy mini turned off itself and restarted, but my lockscreen button wont work anymore, and now my only starts up when I connecgt it to my laptop with a usb cable, but it turns off every time after e few minutes and now i want to flash
stock gb rom 2.3.4 but I can't enter download mode because my lockscreen button doesn't work anymore
i'm using miui gb rc1 rom
if someone can help me please do! thx
Click to expand...
Click to collapse
Hmm! strange problem.... Go For samsung service centre i think they can help u.
Odin can detect ur phone? If yes just flash a right rom in odin downloader...
Sent from my GT-S5570 using xda premium
try with jig usb
no odin doesn't detect cause i can't enter download mode
Can't you even enter recovery mode if you can just restore one of your backups. Else you have no choice but to give your mobile to the service center.
Sent from my GT-S5570 using XDA
(Not recommended) you can also try to open up your phone and manually initiate the part that is pressed by the lock key and enter download mode just a suggestion but it is always safe to give it to the service center. Here in India the people at the center are noob and so they don't even know what is root sobthey didn't charge me money when I had the same problem.
Sent from my GT-S5570 using XDA
If u can enter recoverymod and i am sure u have cwm...wipe data cache or everything and try reboot ...or u can restore back up .
Power button not work......u must go service centre and u must know ur phone not under warranty if u rooted ur phone.
Sent from my GT-S5570 using XDA
I am sure there's a rom which have the option to boot into download mode just search in development forum
or
set up adb then connect your phone in debugging mode
open adb command line and type "adb reboot download" without quote
Wipe data.. from recovery
yusisushi said:
hi, my galaxy mini turned off itself and restarted, but my lockscreen button wont work anymore, and now my only starts up when I connecgt it to my laptop with a usb cable, but it turns off every time after e few minutes and now i want to flash
stock gb rom 2.3.4 but I can't enter download mode because my lockscreen button doesn't work anymore
i'm using miui gb rc1 rom
if someone can help me please do! thx
Click to expand...
Click to collapse
pull of battery, wait 3-4 seconds, put battery in device, press Volume Down + Home + Power
follow this simple steps:
1-put off your battery
2-put off your sd card
3-put your sd card in a card reader or something else (for example another phone with usb cable and micro sd slot...) and connect it to your pc
4-download another rom into your sd card
5-put your sd card in your galaxy mini and put on your battery
6-hold pressed home+power button to go into recovery mode
8-wipe data,cache,dalvik cache battery stats and recommended to format system in mount menu
9-install your just downloaded rom (install zip from sd card,choose zip,select your rom and press yes instal)
10-reboot your device
11-enjoy XD
if u cant enter into recovery mode just boot up your device and when you are in homescreen hold pressed power button then choose reboot and select recovery
hope this will be useful
just go to recovery and mount storage to pc...then download and transfer new custom rom and flash it...
Nixoman said:
just go to recovery and mount storage to pc...then download and transfer new custom rom and flash it...
Click to expand...
Click to collapse
+1
MAD_psycho_Zz said:
follow this simple steps:
1-put off your battery
2-put off your sd card
3-put your sd card in a card reader or something else (for example another phone with usb cable and micro sd slot...) and connect it to your pc
4-download another rom into your sd card
5-put your sd card in your galaxy mini and put on your battery
6-hold pressed home+power button to go into recovery mode
8-wipe data,cache,dalvik cache battery stats and recommended to format system in mount menu
9-install your just downloaded rom (install zip from sd card,choose zip,select your rom and press yes instal)
10-reboot your device
11-enjoy XD
if u cant enter into recovery mode just boot up your device and when you are in homescreen hold pressed power button then choose reboot and select recovery
hope this will be useful
Click to expand...
Click to collapse
oh, sorry for my response , i didnt realise that is almost same as mine
Nixoman said:
oh, sorry for my response , i didnt realise that is almost same as mine
Click to expand...
Click to collapse
don't worry no problem
Related
was trying out the app "Anim Mod" installed chose animation reboot..... now stuck in a bootloop. volume and power combo dosent work please please help!!
What?you mean you can't enter software upgrade mode?
nope i cant.... tried the known key combinations cant even get it to go into recovery or s/w update mode
tried pulling out the battery sim card and micro SD and then hold volume up and plug in the usb cable?
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Troubleshooting required..!!!
Hey guyz I need some help in getting down to download mode. I have a out of the box Captivate. I flashed and installed the latest version of Cyanogen mod 9 and was facing a problem in connecting to my laptop as it was not detecting and then downgraded to previous version to check.
Got stuck in boot and restarts repeatedly and the 3 button mode is not working. Could you help me get into Download or Recovery mode ....?
Sorry dude but people from thecaptivate forum could help you best
Sent from my LG-P970 using Tapatalk
Zaihanzainal said:
got it sorted.... the ONLY key combo that worked to get into recovery for me was Huexx method
-------------------------------------------------
WHAT TO DO IF GOT A BOOTLOOP
1.- Remove battery *edit** I didnt remove battery, I plugged out the usb instead**
2.- Power on your phone again, and once the 4 leds start flashing, repeatedly press a physical key (g-button or volume rocker) until your phone reboots and ir access to CWM
3.- Wipe Cache and Dalvik Cache, then reflash the ROM again
4.- Reboot and wait
http://forum.xda-developers.com/showthread.php?t=1454274
--------------------------------------------------
!!NOTICE!!
Stay clear of the app "Anim Mod" it bootloops your phone!!! (for Zues rom at least...... true story bro.... =P)
Click to expand...
Click to collapse
And if it doesn't work, you can connect your phone to your computer, start adb shell and type in 'reboot recovery'. Your phone will enter cwm and you can restore a backup, reflash a rom..
I use this method if I get a bootloop. (I'm developing a rom.) I think it's very helpful, because you don't must use smartflashtool.
cakebomb.
in some situation adb cannot connect the phone and you have to use the smartflash tool
Anim Mod bootloop
I have the same problem here! I got bootloop after using anim mod. I'm able to go to stock recovery. I had backup my file then did factory reset but problem still not solved. I had backup my framework-res.apk file but it's not on a flashable zip format.
i've tried using apk multi tool on trying to do and adb push but it's not working
what can I do next?
connect your phone to pc in s/w upgrade mode->pull out your battery, hold + and plug in the usb in phone..and after that, use smart flash tool to flash firmware(v20) with CWM included..and after firmware flash your phone will enter in CWM recovery, now from CWM you need to flash supersu from sd card..after flashing firmware and superuser, DO a data,cache,davlik cache wipe !..and just after this you can exit from CWM(reboot)
Here's a link to all tools that you need to repair your phone. You need to use smartflash tool, a V20 firmware with cwm( you can download it from here), and put the Superuser.zip to your sd card..and install USB driver if you haven't installed it yet
I use this method every time when my phone is stuck on bootloop or if I've flashed a ROM that doesn't have root..or other situations.. This method brings you to a rooted gingerbread with CWM(this is all what you need, because from here you can do what you want..for example flashing which ROM you like )
!!! You can use this method anytime...doesn't matter which ROM you have or if your phone is rooted or not. After using this method your phone will be fully rooted, will have CWM recovery and android 2.3 gingerbread !!!
I tried to flash a Stock rom with ODIN 4.38 and after the rom has finished downloading it didn't reboot. Now it won't turn on or even show the Samsung glowing logo.
azadazad said:
I tried to flash a Stock rom with ODIN 4.38 and after the rom has finished downloading it didn't reboot. Now it won't turn on or even show the Samsung glowing logo.
Click to expand...
Click to collapse
You should flash with at least 50% of the battery.
Try charging or make this:
Take out the sim card, sd card and battery.
Connect to pc.
Press download mode buttons combination for 6 secs or more.
Put the battery.
Run Odin as administrator.
Sent from my GT-S5830i using xda app-developers app
Thanks
Hyoz said:
Take out the sim card, sd card and battery.
Connect to pc.
Press download mode buttons combination for 6 secs or more.
Put the battery.
Click to expand...
Click to collapse
This solution worked for me thanks you :good:
SGA
I have a galaxy ace!! It wont turn on until i connect to pc! and it goes till samsung logo n turns off.
and if i go to download mode it shows downloading on the screen but does not recognized by pc
pac3mak3r said:
I have a galaxy ace!! It wont turn on until i connect to pc! and it goes till samsung logo n turns off.
and if i go to download mode it shows downloading on the screen but does not recognized by pc
Click to expand...
Click to collapse
Can you try going to the recovery mod and doing a "Wipe Data/ Factory Reset"? Make sure you have all the necessary drivers installed in your pc. Do post the results. Hope I Helped
my ace is just showing the samsung logo afterthat is switching off plzzz say how to do
my ace is just showing the samsung logo afterthat is switching off plzzz say how to do
Click to expand...
Click to collapse
Type:
adb reboot - for normal boot
adb reboot recovery - for recovery mode
adb reboot bootloader - for download mode
from your PC
hello every body, im hellvis.
i know the androd scene and i've work with it.
im a happy user of the lg 2x but yesterday appned a strange fact.
i use a miui 2.7 and when i restar in recovery (i've installed cwm by rom manager)
my lg sow only the lg logo, and after 2-3 seconds the lg logo are 2 lg logo displaced one in front at other.
my lg DONT BOOT IN RECOVERY AND DONT GO ON NVFLASH MODE!
i've think the cwm is im my external mico sd card...(it's possible??)
i need a serius help. my lg is full bricked?
hellvis93 said:
hello every body, im hellvis.
i know the androd scene and i've work with it.
im a happy user of the lg 2x but yesterday appned a strange fact.
i use a miui 2.7 and when i restar in recovery (i've installed cwm by rom manager)
my lg sow only the lg logo, and after 2-3 seconds the lg logo are 2 lg logo displaced one in front at other.
my lg DONT BOOT IN RECOVERY AND DONT GO ON NVFLASH MODE!
i've think the cwm is im my external mico sd card...(it's possible??)
i need a serius help. my lg is full bricked?
Click to expand...
Click to collapse
Hi!
I didn't noticed that your phone doesn't go to nvflash mode. Try to press the two volume buttons really really hard. My volume buttons got really unsensitive after 2 years. So I am also strugling with my phone to get it to nvlfahs mode.
Go to this thread.
Download AIO-TOOLKIT.
Install AIO-TOOLKIT.
Remove the battery from your phone
Connect the USB cable to your phone while you are pressing volume up & down buttons.
If you haven't installed APX drivers before, then windows will notice a new hardware and it will try to install the drivers for it, but it will fail.
Start AIO-TOOLKIT.
If you already have APX drivers installed skip this step. If you don't have the APX drivers installed, then press "I" (capital i), After that a window will apear. Just follow the instruction.
In AIO-TOOLKIT at the Main menu press number 4.
On the next screen you can decide between the new and old pt layout and bootloader. Keep in mind that whatever you choose you have to flash the correct rom for the correct bootloader+partition layout. So the new MIUI roms are only for the new bootloader and layout, old miuis like the 2.7 is for old bootloader. Here in the developement forum you can find CM10.1 roms which are made for new and old bootloaders, you just have to download the correct one to your actual bootloader. So press number 1 or number 2
Whatever you choosed at the previous step, press number 1, unless you want to do dualboot (two type of andorid on your phone). If you want dualboot then press number 2 and follow the instructions on the screen.
On the next screen you have to choose between 3 cwm version. If you selected the new bootloader I recommend to use cwm 6.0.2.5 or twrp 2.5.0.0. If you choosed oldbootloader I recommend you to use cwm 5.0.2.8 or twrp 2.5.0.0.
On the next screen, after you choosed your custom recovery, type "ok" (without the " marks) and hit enter.
Now the phone is going to be reparititonated and etc... so your phone will work again.
After the flashing ended wait about 10-15 secs then unplug the usb cable.
Reinsert your battery, then turn on your device. It should boot up into the selected custom recovery. If it does not boot up into recovery then turn off your phone and turn it on again while you are pressing and holding volume_down and power button.
Enable usb mass storage in the cwm recovery then plug the usb cable back. Format the internal SDcard to FAT32 then copy the zip file of the selected rom you want to flash (like miui or cm)
Flash your prefered rom
Restart phone.
Done
bitdomo said:
Hi!
I didn't noticed that your phone doesn't go to nvflash mode. Try to press the two volume buttons really really hard. My volume buttons got really unsensitive after 2 years. So I am also strugling with my phone to get it to nvlfahs mode.
Go to this thread.
Download AIO-TOOLKIT.
Install AIO-TOOLKIT.
Remove the battery from your phone
Connect the USB cable to your phone while you are pressing volume up & down buttons.
If you haven't installed APX drivers before, then windows will notice a new hardware and it will try to install the drivers for it, but it will fail.
Start AIO-TOOLKIT.
If you already have APX drivers installed skip this step. If you don't have the APX drivers installed, then press "I" (capital i), After that a window will apear. Just follow the instruction.
In AIO-TOOLKIT at the Main menu press number 4.
On the next screen you can decide between the new and old pt layout and bootloader. Keep in mind that whatever you choose you have to flash the correct rom for the correct bootloader+partition layout. So the new MIUI roms are only for the new bootloader and layout, old miuis like the 2.7 is for old bootloader. Here in the developement forum you can find CM10.1 roms which are made for new and old bootloaders, you just have to download the correct one to your actual bootloader. So press number 1 or number 2
Whatever you choosed at the previous step, press number 1, unless you want to do dualboot (two type of andorid on your phone). If you want dualboot then press number 2 and follow the instructions on the screen.
On the next screen you have to choose between 3 cwm version. If you selected the new bootloader I recommend to use cwm 6.0.2.5 or twrp 2.5.0.0. If you choosed oldbootloader I recommend you to use cwm 5.0.2.8 or twrp 2.5.0.0.
On the next screen, after you choosed your custom recovery, type "ok" (without the " marks) and hit enter.
Now the phone is going to be reparititonated and etc... so your phone will work again.
After the flashing ended wait about 10-15 secs then unplug the usb cable.
Reinsert your battery, then turn on your device. It should boot up into the selected custom recovery. If it does not boot up into recovery then turn off your phone and turn it on again while you are pressing and holding volume_down and power button.
Enable usb mass storage in the cwm recovery then plug the usb cable back. Format the internal SDcard to FAT32 then copy the zip file of the selected rom you want to flash (like miui or cm)
Flash your prefered rom
Restart phone.
Done
Click to expand...
Click to collapse
my device dant want to go on APX mode.
when i plug on computer nothing appair *like magickcarp using splash*
quote police!
60nine said:
quote police!
Click to expand...
Click to collapse
I do not understand what you mean by
"quote police!"
excuse my crappy English
Do you remove the battery?
Try to enter s/w upgrade mode by press and hold volume down key and plug the usb cable. Then use smartflash to flash rom
Sent from my LG-P990 using xda app-developers app
nope
bitdomo said:
Do you remove the battery?
Try to enter s/w upgrade mode by press and hold volume down key and plug the usb cable. Then use smartflash to flash rom
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
do nothing
hellvis93 said:
do nothing
Click to expand...
Click to collapse
You have no drivers installed....Check the aiot and you will have the menu to install drivers...
If not installed..your pc will not recognize your device
@bitdomo
Great tutorial once again...thanks
Sent from my LG-P990 using xda premium
SREEPRAJAY said:
You have no drivers installed....Check the aiot and you will have the menu to install drivers...
If not installed..your pc will not recognize your device
@bitdomo
Great tutorial once again...thanks
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
the driver are installed propery!! i know is as!
now my battery ar dead and i dont know how to start the phone, or how to unbrick thaht
hellvis93 said:
the driver are installed propery!! i know is as!
now my battery ar dead and i dont know how to start the phone, or how to unbrick thaht
Click to expand...
Click to collapse
For the battery...use an universal battery charger my friend...
Sent from my LG-P990 using xda premium
I dont really know what drivers did installed succesfully, but you don't need battery to use smartflash or nvlfash. If you want to use smartflash without battery then first flash the .fls file and for the second attempt flash the .bin file.
My samsung galaxy ace 5830D wont turn on just stays on a blinking samsung screen can you help?
you must flash a stock rom with odin
sorry for my bad english
grace5 said:
My samsung galaxy ace 5830D wont turn on just stays on a blinking samsung screen can you help?
Click to expand...
Click to collapse
Boot into recovery mode (with your phone off hold HOME BUTTON + POWER BUTTON until your phone boot into recovery mode) and then do wipe data/factory reset and wipe cache partition finally reboot your system
Phone doesnot progress past blinking screen with the word samsung. No other way...ple
Phone doesnot progress past blinking screen with the word samsung. No other way...please?
grace5 said:
Phone doesnot progress past blinking screen with the word samsung. No other way...please?
Click to expand...
Click to collapse
As Viper stated in his Comment above, you have to do the Wipes by entering into Recovery Mode(press & hold your Power Button & Home Button simultaneously till you see Samsung Logo). Then enter Download Mode(by pressing Volume Down+HOme Button+Power Button simultaneously). Use Odin to flash your Stock Firmware & then again enter into Recovery mode to do the Wipes. After that reboot your Phone & your done.
grace5 said:
Phone doesnot progress past blinking screen with the word samsung. No other way...please?
Click to expand...
Click to collapse
so you can't boot into recovery mode?
Follow keylocker steps to boot into download mode and flash a Stock rom via Odin using this guide http://forum.xda-developers.com/showthread.php?t=1034145
Thanks ripper and Key locker. Please breakdown for me (on a step by step basis) how I can successfully flash with ODIN. There seems to be a lot of confusing blogs about this.
thanks again
grace5 said:
Thanks ripper and Key locker. Please breakdown for me (on a step by step basis) how I can successfully flash with ODIN. There seems to be a lot of confusing blogs about this.
thanks again
Click to expand...
Click to collapse
A useful Q&A THREAD
http://forum.xda-developers.com/showthread.php?t=2313363
Install the drivers and follow the steps:
C. Flashing the newest firmware:
Turn off your phone
Remove your SIM Card and SD Card
Extract previously downloaded firmware
Open ODIN 4.38 on your PC and change OPS file name to
Code:
Code:
Cooper_v1.0.ops
Select from extracted archive: OPS-OPS, Boot-APBOOT, Phone-MODEM, PDA-CODE, CSC-CSC (leave EFS and One Package empty)
If archive contains only <filename>.tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Connect your phone via USB into PC
When the screen is turned on hold POWER+VOLUME DOWN+HOME and wait until the phone enters the Download Mode
If ODIN detected and recognized your phone should light up the first square to the left side
Press "Start" button and wait, the process should take ~5 minutes
If all goes well your phone should reboot automatically
Square should change the color to blue and display "PASS" it means that flashing process was successful and we have the newest firmware
Disconnect your phone
Turn off your phone
Insert your SIM Card and SD Card again
Turn on your phone
Now you have the newest firmware!
Click to expand...
Click to collapse
After flash a Stock rom via Odin you might get a bootloop, to avoid it boot into stock recovery (Holding HOME BUTTON + POWER BUTTON) and do wipe data/factory reset and wipe cache then reboot
Phone doesnot reboot automatically after flashing with ODIN. However ODIN indicated the blue light and the word passed. Is there any further steps required?
Thanks
tick auto reboot in odin
Sorry for my bad English, I am Frensh
I ticked it but it went back to the same blinking samsung logo.
I ticked it but phone did not reboot. it went back to the same blinking samsung logo after I pressed power button.
grace5 said:
I ticked it but phone did not reboot. it went back to the same blinking samsung logo after I pressed power button.
Click to expand...
Click to collapse
Did you try booting into recovery mode and doing wipes(data/factory reset and cache partition) after flashing the stock rom??
If it doesn't work put out the battery and then try it again
It does not boot into recovery mode after pressing Home+ Power buttons. Only brings blinking samsung.com words
it's home + volume up + power for recovery
edit : oups it's not for 5830 but for 5830i
Sorry for my bad English, I am Frensh
grace5 said:
It does not boot into recovery mode after pressing Home+ Power buttons. Only brings blinking samsung.com words
Click to expand...
Click to collapse
With phone off hold those bottons (HOME and POWER) until your phone boot into recovery mode!!!!
Viper The Ripper said:
Boot into recovery mode (with your phone off hold HOME BUTTON + POWER BUTTON until your phone boot into recovery mode) and then do wipe data/factory reset and wipe cache partition finally reboot your system
Click to expand...
Click to collapse
Hello im wondering if I reboot my system does that mean I will lose all of my music. but if I remove the memory card will that still remove my music if I remove the SD card
Chloebryan said:
Hello im wondering if I reboot my system does that mean I will lose all of my music. but if I remove the memory card will that still remove my music if I remove the SD card
Click to expand...
Click to collapse
Rebooting your system is just like restarting your system. You will not lose your music or any other file just by rebooting. If your music is in your SD Card, unless you format your SD Card, nothing will remove it. Hope I Helped
Chloebryan said:
Hello im wondering if I reboot my system does that mean I will lose all of my music. but if I remove the memory card will that still remove my music if I remove the SD card
Click to expand...
Click to collapse
Executing wipe data/factory reset you'll delete all installed applications, messages and contact numbers, system preferences, profiles, clean the internal memory of your device, but it will NOT delete your external memory (sdcard) so you won't lose your music files, fotos, videos, documents, others.... Don't worry about that
I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?
damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img
Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?
sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.
I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!
which rom did you install?
maybe try to do full wipe and reinstall it
olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse
olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!