Database Develop

[q] lg l90 d415

After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.

nemesis101x said:
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
Click to expand...
Click to collapse
See FAQ thread for getting into recovery.
[SIZE=+1]Q14: I've flashed a custom recovery but what are the key combos to get there?[/SIZE]
Power off the device
Press and hold Power + Volume down
When the LG logo appears on the screen, quickly release the Power button, still holding the Volume down button, and press and hold Power again until the "Factory Reset" screen appears. Don't worry, this won't reset the device.
Use the volume keys to navigate up and down and Power to select. Scroll down and select "Yes" and repeat once more. It may take up to 10 seconds for the device to boot to recovery.

I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?

nemesis101x said:
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
Click to expand...
Click to collapse
You've got an older recovery it seems. Download Philz-Touch from my thread, the link you posted, or get TWRP from this thread
Since you're having booting issues, use fastboot to flash the recovery.

Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Edit: I formatted everything again and tried to reinstall the cyanogenmod and GApps. Seems like I just had to wait for the boot screen.

nemesis101x said:
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Click to expand...
Click to collapse
Put device in fastboot mode. ADB can't detect the device when it's in fastboot mode.
Type:
Code:
fastboot devices
You should see a listing similar to "adb devices" output.
Copy recovery image to the same folder fastboot is in. Then type:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot boot recovery.img
First one will only write the recovery image to the device. The second on will write the image to the device and should then boot the device to the recovery.
EDIT:
Yes, the first boot takes a couple minutes.

Seems I just had to wait for bootscreen.
How do I turn data on and off?

nemesis101x said:
Seems I just had to wait for bootscreen.
How do I turn data on and off?
Click to expand...
Click to collapse
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
There are several ways. I'm guessing you're new to CyanogenMod ROMs?

shinobisoft said:
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
Click to expand...
Click to collapse
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?

nemesis101x said:
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
Click to expand...
Click to collapse
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk

shinobisoft said:
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
Yeah, I got it.
Thank you for all your help!

LG-P880 Firmware flash,upgrade,downgrade improved.

So as LG-P880 flashing instructions were too much hassle for my taste
Here it is a very simple way to upgrade/downgrade your phones easy peasy
Everything will be gone so backup first!
Download this:
Mirror 1:
http://s000.tinyupload.com/index.php?file_id=01589528474127578975
Mirror 2:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Unrar and copy your downloaded new firmware inside LG Flash Tool 2014 folder
Browse to Driver folder and install/double click LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe file.
Shutdown and remove SIM&EXTSDCARD from the back of the phone. Leave battery in-place don't take it out.
Press and hold Vol(-) connect usb cable coming from pc->download mode
Run LGFlashTool2014.exe
Selections
CDMA or 3GQCT doesn't matter really
DIAG
KDZ file location
then select preferred flash mode
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Done, enjoy!
Update:
If you get
This mode is for data backup at service center ...
Click to expand...
Click to collapse
in recovery repeat flashing the KDZ and you will get the stock recovery this time.

Wow, thx Demetris, you are my savior just in time.
With the online upgrade the phone is always stuck in a bootloop and the old offline method just didn't work as it gave me a file extract error, although I know I've done everything correct (maybe the issue was leaving the sim and sd card inside or selecting 3GQCT?)
Btw and fyi, the CSE method is only available if CDMA is selected.
Thanks for making this fast and simple tutorial that even works ^^

Thank you for the great tutorial. I tried exact accordance with my LG-P880 to update. Unfortunately it did not work, the device starts but then remains at the LG logo, no further reaction. Restart / reset no improvements. Options in Android System recoveryy <3e> do not work. Do you have an idea how I can still save my beloved P-880?

Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol +(99% of times you need to use - but for me was +) and press power on. On stock recovery factory reset and now phone will boot

I did and the unit freezes. The figure Android is flat and shows an exclamation mark.

jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f

KDZ
where can we find the original KDZ files?
Thanks in advance! :highfive:

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
For me it worked without a factory reset, just flashing and restarting.
Forget what I said, i think I did a factory reset and wiped nv partition before I flashed the new firmware with this tutorial.
@alberteske all firmwares can be found here: http://lg-phone-firmware.com/index.php?id_mod=15
but some links are broken, after clicking on a link you have to replace the "%2F" at the end of the adress with a "/"

Demetris said:
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
Click to expand...
Click to collapse
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.

baseband change without flashing whole kdz?
isn't a way to extract the baseband files and flash them without having to flash kdz + unlock + re-install everything...?
thanks a lot in advance Demitris!

jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
You sure is a P880 and not a P880G?

Demetris said:
You sure is a P880 and not a P880G?
Click to expand...
Click to collapse
Yes, LG-P880

jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
also for me it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
---------- Post added at 07:49 PM ---------- Previous post was at 07:45 PM ----------
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset

I cant go on... stucked on Bootloader..:
S/W Upgrade
Please wait
while upgrading...
i did what you wrote but cant go forward. I got this message after trying to put: normal flash: Please run or install ActiveSync program
/edit:
Connection to server fialed. Try again in a moment. (pressed OK).
now i am stucked at:
Upgrading your phone....
Do not disconenct your phone or remove you battery until upgrade is completed. Calling and messagin functions are not available druging the update process......

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
ok.
Think here you mean:
press and hold [vol -] and [power] until you got the "android recovery figure"
then clear cache and make factory reset

Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
Somehow my phone got to the LG logo but is in bootloop. Tryed vol+ and power. I can get to stock recovery, but how to factory reset from there?

Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app

xperia u20i said:
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
correct.
used his new tool and tutorial. It worked then.

EB20XY said:
correct.
used his new tool and tutorial. It worked then.
Click to expand...
Click to collapse
i am stucked (again on LG logo)... pressed vol+ and power on and i see the Revocery mode (by LG) - written: This mode is for data backup at service center. After removing and reataching batter press power key to reboot and keep it using. Well this aint working... Only home button works (in recovery mode) and i dont see anything else, where to make a factorty reset...
/edit:
vol- and power got me into the recovery menu. Factory reset and now its no bootloop. Well let me see on...

Vol- was the key
Sent from my Optimus 4X HD using XDA Free mobile app

[Q] Followed directions and.. nothing

So i recently bought a nexus 6 from att..
I had rooted it an unlocked the bootloader.
after a few days OI have decided that I dont really like the size of it and want to return it for something else.
I followed the guide to unroot it and all that, but when I get to the step of booting into recovery, it says no command..
So i tried to continue to follow directions by holding the power+ volume up key to boot into recovery, and then it just boots through to the setup screen..
am i finished or do I need to re flash the recovery?
Thanks in advance for any help provided.

i dont know what you did, but all you have to do is flash the factory img via fastboot.

simms22 said:
i dont know what you did, but all you have to do is flash the factory img via fastboot.
Click to expand...
Click to collapse
Okay, so I should be good to go to return the device?

Danger_zone0 said:
Okay, so I should be good to go to return the device?
Click to expand...
Click to collapse
if you did the factory img, then yes. is your bootloader locked? if it isnt, via fastboot.. fastboot oem lock

simms22 said:
if you did the factory img, then yes. is your bootloader locked? if it isnt, via fastboot.. fastboot oem lock
Click to expand...
Click to collapse
I followed this guide to the letter, except for this part:
"- After everything finished, select "Recovery" using the volume buttons.
- When a small Android appears, press Power Button + Volume UP.
- Select "Wipe data/factory data reset"
I didnt get the option to do any of that, should I assume that its all good and clean?
I do appreciate your help, and I am just trying to cover my tracks haha.
I was just concerned that I couldnt get it to go into recovery to do that final wipe, I dont want to have to pay for it from ATT..

Danger_zone0 said:
I followed this guide to the letter, except for this part:
"- After everything finished, select "Recovery" using the volume buttons.
- When a small Android appears, press Power Button + Volume UP.
- Select "Wipe data/factory data reset"
I didnt get the option to do any of that, should I assume that its all good and clean?
I do appreciate your help, and I am just trying to cover my tracks haha.
I was just concerned that I couldnt get it to go into recovery to do that final wipe, I dont want to have to pay for it from ATT..
Click to expand...
Click to collapse
if you boot into your bootloadee, then press the volume keys to choose recovery, then press recovery, do you boot into its recovery or do you get an error?

simms22 said:
if you boot into your bootloadee, then press the volume keys to choose recovery, then press recovery, do you boot into its recovery or do you get an error?
Click to expand...
Click to collapse
I get the little dead android that says no command, and I hit the volume up+power and when I release the power button, it just boots like normal

Danger_zone0 said:
I get the little dead android that says no command, and I hit the volume up+power and when I release the power button, it just boots like normal
Click to expand...
Click to collapse
well, you can easily flash the recovery via fastboot, just to make sure you got it.

simms22 said:
well, you can easily flash the recovery via fastboot, just to make sure you got it.
Click to expand...
Click to collapse
okay! thanks so much for your help!
think I should just do it all over again?

Danger_zone0 said:
okay! thanks so much for your help!
think I should just do it all over again?
Click to expand...
Click to collapse
reflash the stock img? na, your probably fine. you can reflash just the recovery, if you want. but i think youll be fine.

[Q] DBI Apps Watchdog Reset I can't do factory reset or go to recovery

(Sorry for my eanglish)Hi gyus. I broke ma phone, but not totaly. I just want to install cyanogen, so I do much things on phone, but all of my guides are in Polish. I can paste it here but i don't think it will be helpful. So I install revowery TWRP from XDA using aboot v10b when I have v10f system and flashify, but i can't install CM. So i downgrade my system to 10b and than i install recovery. Showed up purple screen, so I turn phon on in download mode and by LG Mobile Support Tool I install oryginal system. Now I can use phone, but I cant go to recovery or do factory reset. When i wan't to do factory by kesy combination vol- + power i can see "Factory Reset Processing..." and after that only black screen. When I wan't to go to recovery by flashify I can only see
DBI Apps Watchdog Reset
DmiGod Crash Handler: DBI Apps Watchdog Reset
Option: SD card ram dump mode.
Push below files to sdcard before test.
rdcookie.txt, rtcookie.txt
Please do following action
1) Ram dump Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
3) If sdcard ram dump enabled just wait for reboot.
4) Collect ramdump files from your pc to sdcard.
5) Send e-mail to [email protected]
What I must to do now?

Like you said:
"LG Mobile Support Tool I install oryginal system"
If you flashed the KDZ with LG support tool you don't have a custom recovery now, so your phone doesn't boot to it because it's locked.
You must root, unlock bootloader and install a custom recovery again.

my phone screen is purple with a written white letters: "DBI Apps Watchdog Reset" among other writings as well. What I have quefazer to be able to use it again?
My mobile phone is a L40

Has anybody over come this problem. I have it on my LG L40.
Thanks

mnico1973 said:
Has anybody over come this problem. I have it on my LG L40.
Thanks
Click to expand...
Click to collapse
Have you try to connect your phone to pc when holding vol- button? It works on l90

leserti said:
Have you try to connect your phone to pc when holding vol- button? It works on l90
Click to expand...
Click to collapse
Hello thanks for the reply.
Yes I tried that and it still comes up with the purple screen and the DBI Apps Watchdog Reset message.

mnico1973 said:
Hello thanks for the reply.
Yes I tried that and it still comes up with the purple screen and the DBI Apps Watchdog Reset message.
Click to expand...
Click to collapse
Try all combnations, that You can made, so vol+ and power button, vol- and power button etc. I'm sorry, but I forgot how I made this trouble. I'll serch on computer, and i will try to remind every steps that I made.

leserti said:
Try all combnations, that You can made, so vol+ and power button, vol- and power button etc. I'm sorry, but I forgot how I made this trouble. I'll serch on computer, and i will try to remind every steps that I made.
Click to expand...
Click to collapse
I will keep trying thanks

ey... grettings i cant find solution to watchdog reset.... anybody could find how fix that?

I have the same problem. LG D290N purple screen "DBI Apps Watchdog Reset". Cant enter download mode

I am extremely late to this but has anyone been able to solve it? I have an lg class/zero

help me please. i did ****.

Wave I have a lg l90, as reported here:
Http://forum.xda-developers.com/lg-l90/help/help-to-install-cyanogenmod-lg-l90-t3489414
I installed cm13 with gapps successfully ...
I've been using it normally since then...
But in an attempt to run the "es file explorer" in root mode, I installed the supersu from the play store. I opened it, and he asked to restart by TWRP.
It restarted, opened the twrp... And after restarting, the CM will be booting forever.
Can someone help me?

fluiz said:
Wave I have a lg l90, as reported here:
Http://forum.xda-developers.com/lg-l90/help/help-to-install-cyanogenmod-lg-l90-t3489414
I installed cm13 with gapps successfully ...
I've been using it normally since then...
But in an attempt to run the "es file explorer" in root mode, I installed the supersu from the play store. I opened it, and he asked to restart by TWRP.
It restarted, opened the twrp... And after restarting, the CM will be booting forever.
Can someone help me?
Click to expand...
Click to collapse
Try wiping Dalvik and cache..
To get into twrp Turn off phone then Turn on with power button and pressing volume down button.. when lg logo appears release both buttons and press again both until a white screen appears. Use volume keys and power key to select yes.
If wiping cache and Dalvik dont work probably u have to flash cm again.

Warimation said:
Try wiping Dalvik and cache..
To get into twrp Turn off phone then Turn on with power button and pressing volume down button.. when lg logo appears release both buttons and press again both until a white screen appears. Use volume keys and power key to select yes.
If wiping cache and Dalvik dont work probably u have to flash cm again.
Click to expand...
Click to collapse
thank you warimation... but when i tried that, appears the white screens... but is the "Factory Data Reset" that appears... this will erase all data, photos, etc, correct?

fluiz said:
thank you warimation... but when i tried that, appears the white screens... but is the "Factory Data Reset" that appears... this will erase all data, photos, etc, correct?
Click to expand...
Click to collapse
If you have twrp recovery installed it will enter twrp instead reseting your phone

Warimation said:
If you have twrp recovery installed it will enter twrp instead reseting your phone
Click to expand...
Click to collapse
how i can do that, now that the only thing that appears it is the CM logo pulsing in loop(without restart) ?

fluiz said:
how i can do that, now that the only thing that appears it is the CM logo pulsing in loop(without restart) ?
Click to expand...
Click to collapse
Do the steps above.. when it asks for factory reset choose yes. It will take you to twrp recovery instead factory reset your phone

Warimation said:
Do the steps above.. when it asks for factory reset choose yes. It will take you to twrp recovery instead factory reset your phone
Click to expand...
Click to collapse
really?
Really, I have no problem unbrick/formatting my cell phone... In losing data, information, etc.
This time, I would just like to save some pictures of my son that are in this device.
So by pressing "yes" to that question, it will not erase the data, but call the twrp?

fluiz said:
really?
Really, I have no problem unbrick/formatting my cell phone... In losing data, information, etc.
This time, I would just like to save some pictures of my son that are in this device.
So by pressing "yes" to that question, it will not erase the data, but call the twrp?
Click to expand...
Click to collapse
If you have twrp installed no, it wont erase anything..

Warimation said:
If you have twrp installed no, it wont erase anything..
Click to expand...
Click to collapse
Well, is there any other way to access my files, before doing this?

fluiz said:
Well, is there any other way to access my files, before doing this?
Click to expand...
Click to collapse
Dont think so..
And u have root mode in cm13.. just have to toggle it on in developer mode. Check Google to access that..

Warimation said:
Dont think so..
And u have root mode in cm13.. just have to toggle it on in developer mode. Check Google to access that..
Click to expand...
Click to collapse
perfect... I accessed the twrp, but neither from file manager nor the terminal i found my files....
so I remembered that I used sdcard as internal memory...
how can I access your content now?

fluiz said:
perfect... I accessed the twrp, but neither from file manager nor the terminal i found my files....
so I remembered that I used sdcard as internal memory...
how can I access your content now?
Click to expand...
Click to collapse
That I cant help you as I never used SD card as Internal memory..

solved:
http://forum.xda-developers.com/lg-l90/help/decrypting-aes-128-encrypted-ext4-t3521625