Wave I have a lg l90, as reported here:
Http://forum.xda-developers.com/lg-l90/help/help-to-install-cyanogenmod-lg-l90-t3489414
I installed cm13 with gapps successfully ...
I've been using it normally since then...
But in an attempt to run the "es file explorer" in root mode, I installed the supersu from the play store. I opened it, and he asked to restart by TWRP.
It restarted, opened the twrp... And after restarting, the CM will be booting forever.
Can someone help me?
fluiz said:
Wave I have a lg l90, as reported here:
Http://forum.xda-developers.com/lg-l90/help/help-to-install-cyanogenmod-lg-l90-t3489414
I installed cm13 with gapps successfully ...
I've been using it normally since then...
But in an attempt to run the "es file explorer" in root mode, I installed the supersu from the play store. I opened it, and he asked to restart by TWRP.
It restarted, opened the twrp... And after restarting, the CM will be booting forever.
Can someone help me?
Click to expand...
Click to collapse
Try wiping Dalvik and cache..
To get into twrp Turn off phone then Turn on with power button and pressing volume down button.. when lg logo appears release both buttons and press again both until a white screen appears. Use volume keys and power key to select yes.
If wiping cache and Dalvik dont work probably u have to flash cm again.
Warimation said:
Try wiping Dalvik and cache..
To get into twrp Turn off phone then Turn on with power button and pressing volume down button.. when lg logo appears release both buttons and press again both until a white screen appears. Use volume keys and power key to select yes.
If wiping cache and Dalvik dont work probably u have to flash cm again.
Click to expand...
Click to collapse
thank you warimation... but when i tried that, appears the white screens... but is the "Factory Data Reset" that appears... this will erase all data, photos, etc, correct?
fluiz said:
thank you warimation... but when i tried that, appears the white screens... but is the "Factory Data Reset" that appears... this will erase all data, photos, etc, correct?
Click to expand...
Click to collapse
If you have twrp recovery installed it will enter twrp instead reseting your phone
Warimation said:
If you have twrp recovery installed it will enter twrp instead reseting your phone
Click to expand...
Click to collapse
how i can do that, now that the only thing that appears it is the CM logo pulsing in loop(without restart) ?
fluiz said:
how i can do that, now that the only thing that appears it is the CM logo pulsing in loop(without restart) ?
Click to expand...
Click to collapse
Do the steps above.. when it asks for factory reset choose yes. It will take you to twrp recovery instead factory reset your phone
Warimation said:
Do the steps above.. when it asks for factory reset choose yes. It will take you to twrp recovery instead factory reset your phone
Click to expand...
Click to collapse
really?
Really, I have no problem unbrick/formatting my cell phone... In losing data, information, etc.
This time, I would just like to save some pictures of my son that are in this device.
So by pressing "yes" to that question, it will not erase the data, but call the twrp?
fluiz said:
really?
Really, I have no problem unbrick/formatting my cell phone... In losing data, information, etc.
This time, I would just like to save some pictures of my son that are in this device.
So by pressing "yes" to that question, it will not erase the data, but call the twrp?
Click to expand...
Click to collapse
If you have twrp installed no, it wont erase anything..
Warimation said:
If you have twrp installed no, it wont erase anything..
Click to expand...
Click to collapse
Well, is there any other way to access my files, before doing this?
fluiz said:
Well, is there any other way to access my files, before doing this?
Click to expand...
Click to collapse
Dont think so..
And u have root mode in cm13.. just have to toggle it on in developer mode. Check Google to access that..
Warimation said:
Dont think so..
And u have root mode in cm13.. just have to toggle it on in developer mode. Check Google to access that..
Click to expand...
Click to collapse
perfect... I accessed the twrp, but neither from file manager nor the terminal i found my files....
so I remembered that I used sdcard as internal memory...
how can I access your content now?
fluiz said:
perfect... I accessed the twrp, but neither from file manager nor the terminal i found my files....
so I remembered that I used sdcard as internal memory...
how can I access your content now?
Click to expand...
Click to collapse
That I cant help you as I never used SD card as Internal memory..
solved:
http://forum.xda-developers.com/lg-l90/help/decrypting-aes-128-encrypted-ext4-t3521625
Related
Hello,
Here is my problem, wanting to flash a theme on my Xperia Z, I had to perform a cache cleaning, this one was unusually long (~5minutes), so I brutally shut down the phone via power + volume up.
I wasn't aware of:
Phone hangs when cleaning cache?
Just leave it for a few minutes, it's needs some time to clean cache
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Unfortunately it is now impossible for me to get back to the recovery (LED turns green but does not change to purple while holding volume up).
I already tried:
- Reinstall CWM recovery
- Install TWRP recovery hoping "overwrite" CWM (does not work either)
- Uninstall TWRP recovery
- Use the "reboot in recovery" option via clockworkmod and application TWRP (just reboot the phone normally)
edit:
- I now tried to do a factory reset but it's not working, nothing happen when I click "erase all data", can't tell if it's related though...
Having no other ideas I think it would be best to totally remove CWM recovery (via adb ?) and then reinstall it "properly"
Thanks
Update: Just tried to do a factory reset via settings but I doesn't work, nothing happen when I click "erase all data", can't tell if it's related though. Is there any other way to do a factory reset so I can go back to normal ?
Thanks
I use this guide: http://forum.xda-developers.com/lg-l90/general/guide-unlock-bootloader-flash-custom-t2839690
But I cant find recovery.img on my phone and I use another recovery. Now I want to go in Recovery Mode but I have only LG logo and in left up corner is:
[490] fastboot_int()
[590] USB init ept @ 0xffdc000
[610] udc_start()
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
damianww said:
Besides when I restart phone, my phone turn on normally. I think that the fault of a bad file recovery.img. Someone can send me recovery.img on D-405N? Or help me with this problem? Best Regard, Damian.
Click to expand...
Click to collapse
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
olinojephanko said:
here is the thread with latest twrp http://forum.xda-developers.com/devdb/project/?id=6543#downloads
Click to expand...
Click to collapse
But which is on my D-405N?
damianww said:
But which is on my D-405N?
Click to expand...
Click to collapse
all of them, its for all lg l90 D4xx devices.
I recommend using this one TWRP_2.8.4.0_160115_L90.img
Ok It's done, thank you. But i have another problem... I put on my SD card ROM but Team Win Recovery Procjet doesn't see zip file. Why? SD card must be in Ext2?
sd card should be in fat32
make sure you are looking into right directory, in twrp you can choose between internal and external sdcard. if you cant see it on external memory try putting it into internal.
I have another problem... -.- I install ROM but when i turn on phone is LG logo, T-mobile logo and I wait and nothing. Someone can help me?!
which rom did you install?
maybe try to do full wipe and reinstall it
olinojephanko said:
which rom did you install?
maybe try to do full wipe and reinstall it
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/development/rom-crystal-pa-8-0-crx-team-t2928842
But how can I go into Recovery Mode? System stopped on T-mobile logo..
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery.
Click to expand...
Click to collapse
olinojephanko said:
just pull your battery out
and this how you can get into recovery, its from that thread for unlocking bootloader etc
Click to expand...
Click to collapse
I make factory reset and i have Crystal PA (I don't install that after factory reset O.O) Thanks a lot!!
So i recently bought a nexus 6 from att..
I had rooted it an unlocked the bootloader.
after a few days OI have decided that I dont really like the size of it and want to return it for something else.
I followed the guide to unroot it and all that, but when I get to the step of booting into recovery, it says no command..
So i tried to continue to follow directions by holding the power+ volume up key to boot into recovery, and then it just boots through to the setup screen..
am i finished or do I need to re flash the recovery?
Thanks in advance for any help provided.
i dont know what you did, but all you have to do is flash the factory img via fastboot.
simms22 said:
i dont know what you did, but all you have to do is flash the factory img via fastboot.
Click to expand...
Click to collapse
Okay, so I should be good to go to return the device?
Danger_zone0 said:
Okay, so I should be good to go to return the device?
Click to expand...
Click to collapse
if you did the factory img, then yes. is your bootloader locked? if it isnt, via fastboot.. fastboot oem lock
simms22 said:
if you did the factory img, then yes. is your bootloader locked? if it isnt, via fastboot.. fastboot oem lock
Click to expand...
Click to collapse
I followed this guide to the letter, except for this part:
"- After everything finished, select "Recovery" using the volume buttons.
- When a small Android appears, press Power Button + Volume UP.
- Select "Wipe data/factory data reset"
I didnt get the option to do any of that, should I assume that its all good and clean?
I do appreciate your help, and I am just trying to cover my tracks haha.
I was just concerned that I couldnt get it to go into recovery to do that final wipe, I dont want to have to pay for it from ATT..
Danger_zone0 said:
I followed this guide to the letter, except for this part:
"- After everything finished, select "Recovery" using the volume buttons.
- When a small Android appears, press Power Button + Volume UP.
- Select "Wipe data/factory data reset"
I didnt get the option to do any of that, should I assume that its all good and clean?
I do appreciate your help, and I am just trying to cover my tracks haha.
I was just concerned that I couldnt get it to go into recovery to do that final wipe, I dont want to have to pay for it from ATT..
Click to expand...
Click to collapse
if you boot into your bootloadee, then press the volume keys to choose recovery, then press recovery, do you boot into its recovery or do you get an error?
simms22 said:
if you boot into your bootloadee, then press the volume keys to choose recovery, then press recovery, do you boot into its recovery or do you get an error?
Click to expand...
Click to collapse
I get the little dead android that says no command, and I hit the volume up+power and when I release the power button, it just boots like normal
Danger_zone0 said:
I get the little dead android that says no command, and I hit the volume up+power and when I release the power button, it just boots like normal
Click to expand...
Click to collapse
well, you can easily flash the recovery via fastboot, just to make sure you got it.
simms22 said:
well, you can easily flash the recovery via fastboot, just to make sure you got it.
Click to expand...
Click to collapse
okay! thanks so much for your help!
think I should just do it all over again?
Danger_zone0 said:
okay! thanks so much for your help!
think I should just do it all over again?
Click to expand...
Click to collapse
reflash the stock img? na, your probably fine. you can reflash just the recovery, if you want. but i think youll be fine.
I wanted to sell my nexus 6 so I decided to flash to stock rom. Everything seemed perfect until I realized I needed to wipe my data. I restarted in custom recovery and by mistake wiped all data. After that my phone will turn black/dark after booting into the home screen. I reinstalled the stock rom but same results. Even in safe mode. I know my phone is one because I can see the power menu after pressing the power button. Can anyone please help?
trineomorph said:
I wanted to sell my nexus 6 so I decided to flash to stock rom. Everything seemed perfect until I realized I needed to wipe my data. I restarted in custom recovery and by mistake wiped all data. After that my phone will turn black/dark after booting into the home screen. I reinstalled the stock rom but same results. Even in safe mode. I know my phone is one because I can see the power menu after pressing the power button. Can anyone please help?
Click to expand...
Click to collapse
Try issuing these commands from fastboot:
fastboot format userdata
fastboot format cache
Evolution_Tech said:
Try issuing these commands from fastboot:
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
That worked!! Thank you so much!
trineomorph said:
That worked!! Thank you so much!
Click to expand...
Click to collapse
No problem.
Im using a infinix hot 10S (X689B), that i recently rooted. Just today when i opened magisk i enabled zygisk anti detection and it told me to restart device, when i did restart my device it got stuck in the XOS logo and i waited for quite a while and it didnt open, when i formatted my device thru recovery mode, the problem still persists. I have tried flashing again but its not working anymore. My phone is currently bricked, no recovery, no OS. Please help me with my problem as i am still a 13 year old and i dont have money to repair my phone.
infiniUser1008 said:
Im using a infinix hot 10S (X689B), that i recently rooted. Just today when i opened magisk i enabled zygisk anti detection and it told me to restart device, when i did restart my device it got stuck in the XOS logo and i waited for quite a while and it didnt open, when i formatted my device thru recovery mode, the problem still persists. I have tried flashing again but its not working anymore. My phone is currently bricked, no recovery, no OS. Please help me with my problem as i am still a 13 year old and i dont have money to repair my phone.
Click to expand...
Click to collapse
Boot to stock recovery and do the Wipe Data/Factory Reset
Don't worry, it's not hard and doesn't cost you anything for repair, i've done it everytime
Stillhard said:
Boot to stock recovery and do the Wipe Data/Factory Reset
Don't worry, it's not hard and doesn't cost you anything for repair, i've done it everytime
Click to expand...
Click to collapse
thats the problem, whenever i try booting to recovery nothing is showing its just a black screen
infiniUser1008 said:
thats the problem, whenever i try booting to recovery nothing is showing its just a black screen
Click to expand...
Click to collapse
how did you try to boot the recovery?
i boot recovery by power button and volume up, but nothing showing
infiniUser1008 said:
i boot recovery by power button and volume up, but nothing showing
Click to expand...
Click to collapse
you can try to boot it over adb and fastboot. That you try to boot the image.
NikOverflow said:
you can try to boot it over adb and fastboot. That you try to boot the image.
Click to expand...
Click to collapse
can i get a tutorial on that?
infiniUser1008 said:
can i get a tutorial on that?
Click to expand...
Click to collapse
yeah.
1. Download the recovery image on your pc.
2. Boot into fastboot mode.
3. enter "fastboot boot image-file.img"
NikOverflow said:
yeah.
1. Download the recovery image on your pc.
2. Boot into fastboot mode.
3. enter "fastboot boot image-file.img"
Click to expand...
Click to collapse
i cant open recovery how do i open fastboot?
infiniUser1008 said:
i cant open recovery how do i open fastboot?
Click to expand...
Click to collapse
power button + volume down
just reflash stock firmware and done
tutibreaker said:
just reflash stock firmware and done
Click to expand...
Click to collapse
yes that should normally work.
tutibreaker said:
just reflash stock firmware and done
Click to expand...
Click to collapse
Whenever i try flashing it says verified boot is enabled, how do i fix this?