I have been looking through the recent ICS threads and people have had alot of out of memory problems, so I thought I would post this easy to understand tutorial (well I hope it will be easy to understand)
Before starting, on Miroslav's Project Icecream Swift, you need to download busybox installer and install version 1.18.2, busybox included will not correctly determine minfrees.
First download the latest version of V6 at the end of this post, then copy it to your SD card and run it with Script Manager (from the market).
Choose your prefered scrolling speed and in the latest version its pretty much automated, you just have to say yes no a few times but it will auto detect the best settings based on the RAM of the device.
Also do not superclean and reboot, we need to do something else before we reboot.
Ensure you have a file explorer that can view the /system partiton before continuing.
On your phone browse to http://android.mimic.ca
Then click browse and choose your file explorer, and find services.jar in /system/framework then upload it.
After this the site will modify the services.jar and offer a download for it, to make it easy lets just use the update.zip so select that and download it.
Using the stock browser atleast it will go to /sdcard/download.
After this reboot to recovery, scroll to mounts and storage and mount /system manually (when I did not do this it didn't write the modified file) then install the zip.
Wipe dalvik cache and reboot, first boot will take a long time while its upgrading applications then run the V6 supercharger script to confirm you are 100% supercharged and you have your hard to kill or die hard launcher.
Note: On AOKP (atleast this version) because it doesn't have init.d (think its that one) before you first reboot to install services.jar you will need to browse in script manager to /data and find the 99SuperCharger.sh file and make it run on boot to get 100% supercharged.
I don't know if its important but every new rom I use I repatch services.jar just to be safe.
Any questions post here (also if the file doesn't download let me know and I'll upload it and post the link.)
Recovery zips for AOKP and Icecream Swift services.jar can be found below, just mount /system manually and i"nstall zip from sdcard" sorry it took a bit
For me i just use swap works good enough
For me not. Even if i use swap when i try to use gplay and listen music, music app closes itself. (Miro's latest ron)
Sent from my GT540 using xda premium
coto39 said:
For me not. Even if i use swap when i try to use gplay and listen music, music app closes itself. (Miro's latest ron)
Sent from my GT540 using xda premium
Click to expand...
Click to collapse
Thats because swap is not technically used as RAM, what it does is suspends background apps using up RAM, then puts that state in to swap, the apps cannot run from the swap partition, so if you are listening to music and using the browser you will notice this, if you have twitter open, then open a link from a twitter post, the state of twitter gets pushed to the swap partition, to allow the browser to open and run, you then close the browser and it pulls twitter from the swap partition back to RAM giving the illusion of multitasking.
V6 actually gives multitasking by making sure android does not close apps when you have a fair amount of RAM left.
delsus said:
Thats because swap is not technically used as RAM, what it does is suspends background apps using up RAM, then puts that state in to swap, the apps cannot run from the swap partition, so if you are listening to music and using the browser you will notice this, if you have twitter open, then open a link from a twitter post, the state of twitter gets pushed to the swap partition, to allow the browser to open and run, you then close the browser and it pulls twitter from the swap partition back to RAM giving the illusion of multitasking.
V6 actually gives multitasking by making sure android does not close apps when you have a fair amount of RAM left.
Click to expand...
Click to collapse
Thanks for the explanation. I tried to apply supercharger (latest version, Update9RC8.2) to IceCreamSwift second official release bug when it try to apply minfrees the phone reboots.... The version you left works but don't shoy current minfrees, just shows: , , , , ,
coto39 said:
Thanks for the explanation. I tried to apply supercharger (latest version, Update9RC8.2) to IceCreamSwift second official release bug when it try to apply minfrees the phone reboots.... The version you left works but don't shoy current minfrees, just shows: , , , , ,
Click to expand...
Click to collapse
Hmm thats wierd, I have always been able to see them, but if it works it works
delsus said:
Hmm thats wierd, I have always been able to see them, but if it works it works
Click to expand...
Click to collapse
Don't know why but everytime i try to use the script with latest miroslav ICS i got an exception when try to appy supercalculator minfrees then a reboot.
With latest version of the script i can see original minfrees= "1,1,1,1,1,1,1" and when i try to apply new one = Poof! reboot!
Did you installed another busybox or something?... This rom without the script sucks in multitasking matter. (open one app and the others will be closed, is monotasking )
coto39 said:
Don't know why but everytime i try to use the script with latest miroslav ICS i got an exception when try to appy supercalculator minfrees then a reboot.
With latest version of the script i can see original minfrees= "1,1,1,1,1,1,1" and when i try to apply new one = Poof! reboot!
Did you installed another busybox or something?... This rom without the script sucks in multitasking matter. (open one app and the others will be closed, is monotasking )
Click to expand...
Click to collapse
I'll check it on new version of miro's rom tonight when I charge my phone (battery is dead right now) but I normally use the default busybox, it could be that the default has been changed on this rom, download busybox installer from the market and try a version on there, they are all complete so should have no problems on that end, lemme know if it still doesn't work.
delsus said:
I'll check it on new version of miro's rom tonight when I charge my phone (battery is dead right now) but I normally use the default busybox, it could be that the default has been changed on this rom, download busybox installer from the market and try a version on there, they are all complete so should have no problems on that end, lemme know if it still doesn't work.
Click to expand...
Click to collapse
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/
coto39 said:
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/
Click to expand...
Click to collapse
Hmm, I'll try myself soon, havent noticed the problem before, I'll report back
coto39 said:
My issue was cause by the minfrees calculated by supercalculator (option 10). Using option 2 is ok but, still have 9-5mb free and if i open 2 apps -> one of them close itself (and like you said, swap does't help with that)... so i have to go back to sdsl 2.0 :/
Click to expand...
Click to collapse
Ok I just resupercharged my phone running miroslav's rom, and I did see your problems, I fixed it downloading busybox installer and using busybox version 1.18.2 and it will detect your minfrees.
Also updated OP with this info and the patched services.jar files.
delsus said:
Ok I just resupercharged my phone running miroslav's rom, and I did see your problems, I fixed it downloading busybox installer and using busybox version 1.18.2 and it will detect your minfrees.
Also updated OP with this info and the patched services.jar files.
Click to expand...
Click to collapse
I did this, but when i run the script for second time to confirm if it worked, it says:
Launcher is DIE-HARD! ie. SUPERCHARGED
but after says:
OOM Grouping Fixes ARE NOT in Effect
...
Current values DON'T MATCH Prior SuperCharge!
this means that didn't worked???
I use miroslav last update 20/05/12
arperalta3 said:
I did this, but when i run the script for second time to confirm if it worked, it says:
Launcher is DIE-HARD! ie. SUPERCHARGED
but after says:
OOM Grouping Fixes ARE NOT in Effect
...
Current values DON'T MATCH Prior SuperCharge!
this means that didn't worked???
I use miroslav last update 20/05/12
Click to expand...
Click to collapse
Did you use busy box installer to install busy box or are you just using the version pre installed? The CM9 one will not work with V6.
Sent from my LG-GT540 using XDA
delsus said:
Did you use busy box installer to install busy box or are you just using the version pre installed? The CM9 one will not work with V6.
Sent from my LG-GT540 using XDA
Click to expand...
Click to collapse
I used busybox installer to get the version 1.18.2
arperalta3 said:
I used busybox installer to get the version 1.18.2
Click to expand...
Click to collapse
Using root explorer check /system/etc/init.d and see if there is a supercharger script in there.
If not try supercharging again, reboot and check, if its still not working find the 99supercharger.sh script and select "run on boot" and reboot, it should work after this.
delsus said:
Using root explorer check /system/etc/init.d and see if there is a supercharger script in there.
If not try supercharging again, reboot and check, if its still not working find the 99supercharger.sh script and select "run on boot" and reboot, it should work after this.
Click to expand...
Click to collapse
thanks, the script is in /system/etc/init.d, i will try to run the script with the option "run on boot" in script manager later
arperalta3 said:
thanks, the script is in /system/etc/init.d, i will try to run the script with the option "run on boot" in script manager later
Click to expand...
Click to collapse
Before you select "run on boot" just try to supercharge again, something could have messed up a little when you applied the minfrees, init.d scripts should run on boot anyway.
delsus said:
Before you select "run on boot" just try to supercharge again, something could have messed up a little when you applied the minfrees, init.d scripts should run on boot anyway.
Click to expand...
Click to collapse
weird weht i run the script in the end it says that everything is ok and active, but when i reboot and clean davilk chache and run again, it says that isnt ok
I have applied V6 Supercharge on this IceCreamSwift ROM. If I do Wipe Data/Factory Reset, do I need to apply V6 again?
Yes
Related
This ROM has been modified to Include The Data File for The Sims 3. Instructions are included with the download link.
XipherBUILD Rom
Flashing this rom will wipe your data (Not you internal SD Card) please make a backup of all your applications
This ROM is based on eugene373's Frankin-Twiz Rom and has the default theme, indicators and wallpaper. The changes have been to the boot sequence and the underlying system. I have also included many of the default Samsung Applications that were removed from Frankin-Twiz. A full list of changes follows.
XipherBUILD v.1.1:
~Added the TouchWiz Calendar
~Added AllShare fixed to be compatible with Frankin-Twiz
~Fully Deodexed OTA Release and ported application updates
~Corrected default permissions of /data/app applications on install
XipherBUILD v1.0:
~Included Root
~Included the I9000 Boot Splash
~Included a modified I9000 Shutdown sequence
~Included the JI6 OTA modem.bin for 3G & Reception Improvements
~Included LSB Fix for GPS to use MS Based Network Assistance from Google's Servers
~Included the Captivate Camera Application
~Included JAC's OC Kernel + Color Correction
~Installed the following Samsung Applications:
AmazonMP3
Audio Postcard
Samsung Calculator
Samsung MyFiles
Samsung MediaHub
Samsung Music Player
The Sims 3 Launcher (You will need to install the Sim3 Data Package As Well)
SlackerRadio
~Replaced Layar-samsung with the True Layar application from the market
~Included the ROM Manager (Free Version) and RyanZA's OCLF (Free Version)
~Other stuff I forgot about.....
This can be lag fixed with either the Voodoo Lagfix OR RyanZA's One Click Lag Fix!
************************************************************************************
UPDATED VERSION RELEASED 10/11/10 Download the XipherBUILD.v.1.1 (Sims 3 Included).zip from MultiUpload HERE
ORIGINAL VERSION RELEASED ON 10/10/10 Download the XipherBUILD.v.1.0 (Sims 3 Included).zip from MultiUpload HERE
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
************************************************************************************
Installation
1. Download the ROM Manager from the market as well as the RyanAZ's OCLF 2.0.
2. Open OCLF from the menu and install root. (Follow the instructions that the application gives you to enable root access)
3. Copy the file XipherBUILD.v.1.0.zip to your internal sd card.
4. Open the ROM Manager and click "Flash ClockworkMod Recovery" and select the Samsung Vibrant. When prompted allow root access.
5. Reboot into Recovery. The default Android recovery screen will appear, use the Volume Keys to move down to "reinstall packages" and kit the power key to select it. The phone will reboot into the ClockworkMod Recovery.
6. Using the vol- key move down and select "install zip from sdcard"
7. Using the vol- key move down and select "choose zip from sdcard"
8. Using the vol- key move down and select "XipherBUILD.v.1.0.zip"
9. Using the vol- key move down and select "Yes - Install xxxx"
The install will commence. Once done use the vol- key to select go back and then select "Reboot system Now"
Once the install has completed make sure to open ROM Manager and run Fix Permissions to correct any permission issues.
Over clocking the CPU
Make sure to install SetCPU and adjust your CPU to 200mhz - 1200mhz to enable the over clocking of the processor. You can get SetCPU from the market or elsewhere on these forums.
Lag Fix Guides:
There are step by step instructions to apply either RyanZA's One Click Lag Fix, or the Voodoo Lag Fix
Only One Lag Fix Can Be Enabled At A Time
RyanZA's One Click Lag Fix
1. Open the application menu and select OCLF
2. Allow the application to have Root Access by selecting Allow
3. Install the EXT2 Tools
4. Apply the v.2.1+ Lag Fix and select a size of approx 1300mb
5. Wait until phone powers down and reboots.
Voodoo Lag Fix
1. Download the Voodoo lag fix from here project-voodoo.org Make sure that you download the Galaxy S Vibrant T-Mobile (SGH-T959) update .zip
2. Copy the "Voodoo-lagfix-3.0-SGH-T959-update.zip" file to your internal SD Card
3. Open the ROM Manager from the application menu and allow it root access.
4. Install ClockWork Recovery (Select Galaxy S Vibrant) and then Reboot into Recovery.
5. The default recovery menu will open, select "reinstall packages"
6. After the phone boots into clockwork recovery select "install zip from sdcard" then "choose zip from sdcard" and use the volume keys to move down to "Voodoo-lagfix-3.0-SGH-T959-update.zip" and hit the power key. Next confirm the install by moving to Yes and install. Once this is completed go back until you can reboot the phone. As the phone reboots the lag fix will be applied.
CREDITS:
eugene373 for the Frankin-Twiz Base
justanothercrowd for the exceptional kernel
RyanAZ for the easy Root Option
lbingham for the Mobile AP Mod
chaoscentral for the I9000 Camera Mod
rk0 for the I9000 Boot animation
Tydiz for the I9000 shutdown animations
And Anyone Else I May Have Missed!
Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?
dddtc2005 said:
Thanks for the work! Will have a try!
Another question:
Can the two lag-fix use together?
Click to expand...
Click to collapse
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )
xipher_zero said:
You welcome! No, it is either one or the other. Many people swear by the Voodoo lag fix, but if you forget to disable it you will end up having to go through a lot to reverse it. (Personal Experience )
Click to expand...
Click to collapse
OK,got it. Thanks
I use Bionix's rom with voodoo kernel(thanks for his great work), but when i enabled voodoo it says '/dev/block/mmcblk0p3' in adb shell instead of '/dev/block/mmcblk0p4' in his thread. I don't know why but it will be all right to flash another Rom. I also searched on google, but thers's no help about it.
Hope this can help someone who were in this situation..
PS: When disabled ,it says '/dev/block/mmcblk0p2' corretly.
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Thanks for the Great Work!!!!!!
The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks! It really confused me for a long time...LOL
Parse Error on Sims3
Any reason this is showing up? Other than that, great ROM!!!!
Nice work, lets keep the development for the Vibrant rolling. The more the better!
Sent from my SGH-T959 using XDA App
Wow no one is reporting Bugs
The K-Zoo Kid said:
It should always say "0p3", you were looking in the wrong spot. It confused me at first too.
Click to expand...
Click to collapse
Thanks for clearing that up, I had already gone to sleep when dddtc2005 asked.
jreed3786 said:
Any reason this is showing up? Other than that, great ROM!!!!
Click to expand...
Click to collapse
I didn't have enough room in the ROM Zip to include the data package and still be able to use MediaFire's free 200mb account. I have updated the OP with the instructions on how to get and install the data package.
If anyone knows of a different file sharing site that is as easy for people to download from please let me know and I will upload the ROM with the data package included. (232mb).
I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??
I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App
chris279m said:
I know this isn't a BIG deal. But you added the thing for the Sims 3. When i click on it to download it. I get this message. *There is a problem parsing the package.* Uhh, Is it my fault and didn't do something or what??
Click to expand...
Click to collapse
I have updated the OP to include instructions for getting the Sims to work. Basically the issue arises from the Sims 3 Stub file being locked to my handset. When it is installed on anyone else's handset it will error out due to the device ID mismatch. The way around this is to install the data package yourself. All of the instructions to do so are in the OP now.
junkdruggler said:
I use dropbox to host files... 2gb limit and they seem to download more successfully
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I have never used DB before. Can I set it up so that anyone can download the file, or do they have to log into my DB account to access it?
You just upload and it allows you to share a link... its really easy and links your phone to your comp...
Sent from my SGH-T959 using XDA App
This looks awesome! It's great seeing all of these custom ROMs coming out now, thank you!
first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast
rolf90 said:
first time i ever flashed a rom to my vibrant...well worth it!! GOOd ROM!!! fast
Click to expand...
Click to collapse
Thank you! I glad you like it. Any feedback is appreciated!
First of all I must say thanks to all those people who's research helped me made my first Custom ROM Based on LG v20g and wanted to share it
ciaox
andy572
doktornotor
stormpack
janitux
tkirton
Thank you all
ROM FEATURES
_____________________________________________________________
ROM Name [email protected]_2.3.3_v2
New Changes in v2
Now Overclock your Stock ROM with franco.Kernel |.v1-PRE.RELEASE2| 2.6.35.10
Now Supports EXT4 but I would suggest using EXT2
Custom boot animation allowed and added android eats apple
Patched Lib SQLite 3 for Better IO speed
HEAP size set to 40
CM7 DSP manager added
stagefright player-disabled
added new tones
app2sd variation included (look in the download section-the first boot will take some time....so dn't be in rush )
Some apps and widget are removed(Can be installed by Flashing the zip file in the download section-This apps will be installed in data/app so that you can uninstall them later.)
Code:
AnalogClockWidget
BookmarksWidget
CalendarWidget
ClockWeatherWidget
ConnectionManagerWidget
DigitalAlarmWidget
DualClockWidget
Facebook
GenieWidget
Gmail
Maps
MemoWidget
MessageWidget
PhotoWidget
thinkdroid
Twitter
VoiceSearch
YouTube
OI File manager added
Rooted
BusyBox installed
Added /etc/init.d scripts support
No Apps2SD (Apps to EXT) To get that Try flashing Darktremor App2SD Make sure your EXT partition is EXT2,
EXT3-is not tested and EXT4 is not supported
to change the ext partition easily chk here
Bash shell support
/system/framework is deodexed
/system/app is deodexed
LG launcher
LG STOCK Keyboard
Zip Aligned apk
flashable with ClockWorkMod and amonRA....
HOW to Flash the ROM [email protected]_2.3.3_v2
_____________________________________________________________
Attention This can only be done in Windows PC
Download all of the file in the download section
Extract Romania V20G.zip to any folder
First connect your Phone through USB(Make sure you have all the USB Driver Installed)
Disable LG Virtual modem in the device manager reminded by Lawful123
Then open LGMDP THUNDER v1.5 (To download it look at the Download section and put it in a folder)
Click on Select Port
check your Phone and click on connect (If it doesn't Show your Phone then Go to Setting > application > development > and check USB Debugging )
Choose your Image Folder(Extracted Romania V20G folder) and all other file will be added automatically
Then un-check Recovery Image If you have CWM recovery (the recovery img in Romania V20G is CWM 3.1.0.0 recovery )
After That you will see a drop-down menu where the default value is None, Select Erase EFS APPS and click ok on the pop up.
Now click on start.......Wait LGMDP will backup your nv2 file(nv2-file includes e.g. you IMEI or MAC-Address..so your phone will not work without this !!! )
after that It will put your phone to emergency mode wait.....till LGMDP finds your phone and start the installing process.
Now Take a cup of Coffee and enjoy till its done
Then It will reboot your phone(if it doesn't reboot automatically then just press the power button) and restore the backed up NV2 file automatically(Do not I mean Do not Cancel this process or your phone will be bricked )
It will reboot(if it doesn't reboot automatically then just press the power button) after the NV2 file restoration is completed.
and your Done with LGMDP!!!!!
Now let the phone start up and configure if you want.
After this stage you can use the official v20G without any customization or root.
If you want Root and other posted features then Switch Off your phone and enter to the recovery and follow the below steps(hold down Home+vol dwn button and press and hold power button until you see the CWM recovery)
Flashing [email protected]_2.3.3_v2 via CWM Recovery....Process
[*]Enter into recovery
[*]and wipe all(wipe data/factory reset)
[*]wipe cache
[*]select mount-storage and format system
[*]install zip from sd card
[*]and flash [email protected]_2.3.3_v2.zip
[*]and enjoy!!!!!!
How to change ROM Easily
Answer is Mik's new-baseband-patch
In past if you wanted to install any Custom ROM after you flashed official 2.3.3, you had to use KDZ tool to go back to Official 2.2 to get the network working.
but now you can easily flash any custom ROM by recovery. and if you do not see network(as you won't) then flash new-baseband-patch and bingo now you have signal....
BTW If you face any GSM or DATA related Issue after flashing this patch then report this to mik not me........
Download Section
_____________________________________________________________
[email protected]_2.3.3_v2(MD5-3EA4E4584105D812B97F7D95A9877C7B)
[email protected]_2.3.3_v2_a2sd(MD5-4C0C208C4E3307332A6B7685A0CE397D)
Romania V20G(MD5-F6887E28209C595CFAF4C1A2B7478CA9)(Multiupload link will be added later)
LGMDP-v1.5.exe
Removed apps for [email protected]_2.3.3_v2.rar
Power Menu MOD with Circular Battery MOD (thanks to PaoloM70 and doktornotor )
Mik's new-baseband-patch
[email protected]_2.3.3_v1.2(MD5 hash-571B9C20C6B3A83634F3C0DDDF368F38
Help and Suggestion will be appreciated
Thank you
Good for you
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.
Lawful123 said:
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.
Click to expand...
Click to collapse
Thanks for your suggestion but I never disabled it. but I will include in the instruction for safe keeping.
downloading now 1 request plz can u make some themes or themes chooser for ur cfw it will be more awosome
can i use INTERACTIVE DATA2SD with this rom
So what's different from doktornotors version. And is this flashable via Sd card
Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?
han-shinbi said:
Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?
Click to expand...
Click to collapse
It is already written here? "My" ROM is a stock rooted LG v20g with a2sd, no other changes done.
This may sound stupid but why can't you just flash the ROM why all these steps also can you add any other mods after you flash the rom??? Like franco tweaks or ungazes data2sd????
Sent from my LG-P500 using XDA Premium App
This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself
dislplin01 said:
This may sound stupid but why can't you just flash the ROM why all these steps
Click to expand...
Click to collapse
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
...or otherwise your phone won't start like in my case
doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
I didn't see it above and have not looked at your roms thread thank you for the answer
Sent from my LG-P500 using XDA Premium App
dark-k said:
This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself
Click to expand...
Click to collapse
It's theme. Use Nt-sense CM7 theme.
Sent from my LG-P500 using XDA Premium App
for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....
mujju85 said:
can i use INTERACTIVE DATA2SD with this rom
Click to expand...
Click to collapse
i think u can use it but i havnt tested it.try using EXT2 partition.
untitledmangxg said:
for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....
Click to expand...
Click to collapse
try installing this rom by following the guide given in the 1st post.
i have done all steps like in first post....it was fault of interactive data2sd...dont install.....
untitledmangxg said:
i have done all steps like in first post....it was fault of interactive data2sd...dont install.....
Click to expand...
Click to collapse
Then its better to stick to a2sd. Later I will test d2sd and let you guys know if it works.
BTW I am using EXT2 Partition.
@cyber_avijit:
Do you want a private howto on adding powermenu? I'll give you one if u want.
requires Root (Superuser/Busybox), and a kernel that supports "init.d" scripts (script files that are stored in /system/etc/init.d/).
The script also has a partner called V6 supercharger they go pretty well together heres a link to the V6 supercharger by zeppelinrox
this script is so easy to use but users might have problems using it so here is a easy install for you all to use i have converted it to run on non samsung phones by renaming the file and removing processes connected to the stock samsung apps
Have Clockwork recovery installed
Download the update.zip from the bottom of the post
Reboot into recovery and install the update.zip
Now for the really easy part
Using Root Explorer navigate to ect/init.d and select mount RW now scroll down to the "97loopy_smoothness_tweak" file and open it in the text editor within root explorer and you will see the 3 main sections to the script they are called
At the start of the script you will see this
Code:
USER_LAUNCHER=""
you need to add the launcher you currently use so that it gets locked in
Resident system apps
Other system apps
Other apps
in the 3 sections you will see lines one code that look the same which are
Code:
if [ $PROCESS_1 -eq "0" ]; then PNAME="com.android.phone"; NICELEVEL=-20; if [ `pidof $PNAME` ]; then renice $NICELEVEL `pidof $PNAME`; PROCESS_1=1; P_CHECK=`expr $P_CHECK + 1`; fi; fi;
All you do to add a app you want to keep in memory for as long as possible is to edit the script and change these values for e.g the stock dialer to go contacts
Code:
PNAME="com.android.phone";
to
Code:
PNAME="com.japps.contactpro";
that will keep Go Contacts EX locked in the background so everytime you wish to use the GC EX dialer you wont have to wait for it redrawing before using it.
To find the process names goto the data/data folder and all the folders you see in there are the process names used by the apps e.g. the com.android.vending folder is the process name for the vending.apk aka market app.
Just to let users no this script will not auto start the apps on reboot and once you first select the app you have added to the script after reboot you will have to wait for the app to redraw the app again into the memory slot once it has done that the app will remain in a cache type(hidden) form until you run the app again then it will return to ram in the foreground.
lpy of XDA said:
What this script hopes to achieve:
- Entering your PIN with minimal/no delay/lag
- Minimising delay with lock screen pattern/unlock (not the time it takes to wakeup, but the touchscreen response lag)
- Having smoother notifications on the status bar, and smoother pulldown menu response
- Minimising Launcher lag while Media Scanner is running (can scroll through screens without heavy pauses)
- Minimising lag when scrolling through the market while icons are still loading
- Installing/Uninstalling apps while continuing other tasks
- Minimising/eliminating intermittent lag spikes in gaming
- No delay in being able to answer phone calls
... you get the idea
Click to expand...
Click to collapse
Thanks goes to the creator lpy @XDA
tweak source:
http://forum.xda-developers.com/showthread.php?t=1137554
Download:
http://www.mediafire.com/?g4fte3m87t3ukui
Install via CWM as update.zip ???
Have you tested this? I'm doing backup right now, and I might, but I'm looking at the script, and it says it's for Galaxy S. There's also a part on one of the first lines where you have to specify your launcher. Also, I don't think the scripts it our init.d even begin with "S_..", but rather with a two digit number, e.g. "06swapon".
EDIT: I edited the file to point to my launcher "com.fede.launcher", and touched nothing else. Named it "18smooth" or something of the sort, and put it in /system/etc/inid.d. The system failed to boot(never got past the second "LG" screen. Maybe it's the rom I'm using, but this is not working so far. I hope your promised tutorial is of use.
nutterbg said:
Have you tested this? I'm doing backup right now, and I might, but I'm looking at the script, and it says it's for Galaxy S. There's also a part on one of the first lines where you have to specify your launcher. Also, I don't think the scripts it our init.d even begin with "S_..", but rather with a two digit number, e.g. "06swapon".
EDIT: I edited the file to point to my launcher "com.fede.launcher", and touched nothing else. Named it "18smooth" or something of the sort, and put it in /system/etc/inid.d. The system failed to boot(never got past the second "LG" screen. Maybe it's the rom I'm using, but this is not working so far. I hope your promised tutorial is of use.
Click to expand...
Click to collapse
yes i have tested it and it works i will be uploading a modded one for the update.zip but if you install it just rename it to 97smoothnees, it asks for the launcher you currently are using e.g. adw launcher but if you have any worries wait until tomorrow for the tut
I think this is helping with battery management because my battery seems to be going down slower
Sent from my GT540 using XDA Premium App
Let's hope I'm wrong. Looking forward to that tutorial.
Downloaded it, and flash'd it in cwm on my girlfriends gt540. In her opinion, it makes a noticeable difference.
Sent from my Nexus S using XDA Premium App
Oki, so I install this script and I must say that it's working. ;-)
Tut added hopefully you can all understand it
Hmm, I don't know why but I don't have "97loopy_smoothness_tweak" in folder.
pRo_lama said:
Hmm, I don't know why but I don't have "97loopy_smoothness_tweak" in folder.
Click to expand...
Click to collapse
let me have a quick check to see whats going on
eoghan2t7 said:
Have Clockwork recovery installed
Download the update.zip from the bottom of the post
Reboot into recovery and install the update.zip
Click to expand...
Click to collapse
I did this and when i'm trying to do next i can't find the file in etc/init.d folder
pRo_lama said:
I did this and when i'm trying to do next i can't find the file in etc/init.d folder
Click to expand...
Click to collapse
i just tried the update.zip again there and it installed fine for me what clockwork version are you using?
but you can extract the zip file and manually add the file to the init.d folder and give it these perrmissions
xxx
xxx
xxx
I have 4.0.1.4.
When I apply script, reboot phone then on screen with PIN I don't have any delay.
pRo_lama said:
I have 4.0.1.4.
When I apply script, reboot phone then on screen with PIN I don't have any delay.
Click to expand...
Click to collapse
try adding it manually to see what happens.
So I must manualy add the file into system and then continue with tutorial ???
yes you coy the script to the ect/init.d folder then continue with the tut
ok, i'm going to try it ;-)
Can't download please mirror on another hoster.
Sent from my GT540 using XDA Premium App
Should this method not eat battery rather than conserving it? As apps run in background correct me if m wrong....
Sent from my GT540 using XDA App
What this does is speed up your tab. Its crazy how well zepplinrox got this to work, but it makes the tablet fly. It doesnt require more battery, nor stress the hardware any. It alters and fixes the OOM groupings, lowmemorykiller and the priorites. I don't want to get into the nitty gritty, but do it and I'm sure you will be amazed!
If you do not have the init.d folder, then you need to load a custom rom. Some custom roms will have this folder. Read on page two, zepplinrox explains it more.
Here is the process to get the supercharger to work and stick on out tabs. Its all spelled out on the original post ( by zepplinrox ) , but this is the short and sweet version.
You need to be rooted and have busybox 1.18.2 or lower.
First off go here and download the script : www.mediafire.com/?w6682pwu52ty5o6
Then download this app : https://market.android.com/details?id=os.tools.scriptmanager&feature=search_result
1. Then you run the script manager and find the V6 script that we first downloaded.
2. When you click on the script, the manager will open,( Make sure the run as root box is ticked under the "run" button ) just hit run in the top left of the screen.
3. Then, you have to just click in the black anywhere and the keyboard will open. Select a number 1, 2, or 3 , this is how fast the text will scroll. Being the screen is so big, select number 1. You will be fine. Hit enter on the keyboard, then lower the keyboard away.
4. You can now see a lot of options, don't get nervous. The script does it all itself. Being that we have so much ram already, the minfrees are already huge, but can be bigger . So options 1 - 7 are smaller than the stock minfrees. You can use either setting 8 or 9. I'm using the setting number 9. So to select the minfrees you want ( either number 8 or 9 ), click on the screen to bring up the keybpard, and hit the number you want ( again 8 or 9 only )!
5. Once that is done you will see the script run some info in front of you. It will say to reboot but don't yet. Type the number 17 in, and you will see it say bye etc. Ok, once it says bye, hit the back soft key in our launcher. Now navigate to this on the screen that in front of you. Keep hitting back until you get to the ''/'' of the tablet. Rom there you will click on ''system'', then click on ''etc'' and lastly on '' init.d '' . In there you will see a file called '' 99SuperCharger'' . Click on that and the script manager will open again, but you need to select certain boxes this time before hitting run. When the screen comes up hit '' run as root '' and '' run on boot ''' and hit save. Once that is done hit run ( nothing happens here, so don't expect to see anything scrolling) , then back out using the back arrow in our launcher. Then reboot your tablet, and that's it. The custom minfrees now stuck, and your supercharged!
Thanks to zepplinrox for this script!
P.s. to find out of the script stuck, reload the FIRST V6 script. Select your speed like we did, then once it is all loaded up you will see a line in there that says prior mifrees ( prior is still your current ) . Just match that up with the number you selected at first.
Thats it.
Here is the op on supercharging, from zepplinrox forum.xda-developers.com/showthread.php?t=991276
Sent from my Galaxy Tab!
so what does this do exactly?
In a nutshell, its a memory manager.
It will speed up your phone, multiasking etc. Its kinda crazy how well it works, and does not require more battery life like overclocking does. What it does it rearrange the OOM groupings, lowmemorykiller and priorties.
Sent from my Galaxy Tab!
cool thanks for the quick reply, can this be used in conjunction with a Task's ROM and pershoot's kernel?
I think I'll wait for others to test this out first seems too good to be true
mickey78 said:
cool thanks for the quick reply, can this be used in conjunction with a Task's ROM and pershoot's kernel?
Click to expand...
Click to collapse
yes. you can use in on basically anything bro.
yes it works anything android based. And for the skeptics, its been out for sometime now. Look here..
forum.xda-developers.com/showthread.php?t=991276
That's the op on this.
Sent from my Galaxy Tab!
Samsung Adrenaline Shot
This has been developed for some days and I am using on my Captivate, it's amazingly fast. I know some files are HC based but written for GB, maybe someone take a look and see if it will work?
http://forum.xda-developers.com/showthread.php?t=1236779
I use SAS, not USAS as it is just a script.
I've been using it for a while on my evo and the same with the tablet. All works well.
Sent from my Galaxy Tab!
I'll follow this thread closely. It always amaze me how a small group of people working together can achieve things beyond what Google themself can achieve with their OS.
Im getting permission denied during the last step (run as boot etc.)
Any ideas? My tab is deffo rooted as other apps that require root work fine.
Cheers!
I haven't got the init.d? What's wrong? I'm using broadcom KH7.
Here is a screen shot.
same for me, i dont get the init.d folder. I saw many permission denied lines in the script, so i run the script again with root. It doesnt help and i restart my Tab... and now i am in a bootloop. So i restore my backup, but can someone tell me what i do wrong?
Thx in advance
Flash
Edit: same for me, like klass1 , i use the Broadcomb stock too
klass1 said:
Here is a screen shot.
Click to expand...
Click to collapse
I also have the same problem, running stock rom.
Is root required?
Hey sorry guys, I'm out of the house. But yeah root required, I think. But not 100% sure as I have always been rooted. And as far as not seeing the init.d folder.. are you fellas all the way back to the '/' in the script manager? Go system, etc,init.d and the 99SuperCharger should be there. In sure why you can't see back that far. Are all or you guys rooted that are having issues? The ron type doesn't matter, as these folders are universal on all roms.
Also I too received some denied lines, but all is working as should. So that shouldn't be an issue.
Sent from a miui powered HTC Evo.
Yes, I am all the way back at / going to /system/etc and I could NOT find the init.d folder after running the script. I am rooted and using the Broodcomb ROM for GT-P7500. I have the same problem the other guys have. Help please!
i didnt have it either, the init.d folder, so i ran a kernel tweak from the creator of V6 scrpit and that created a init.d folder for me then i ran the script again and there it was the 99Suercharger file. So i think you can just create the folder your self, no need to run the kernel tweak, just ad new folder to system/etc called init.d that should fix it for thoose that dont have it created by the script.
And did you noticed a good speed improvment?
Sent from my GT-P7500 using xda premium
How do you create a folder?
This is an automatic installer for the lagfree script and the dalvik fix build.prop changes.
It does detect if you're using ICS or GB and does set it up accordingly.
Explanation and credits are in post 2. Manual instructions on how to apply this without the installer are at post 3. Have fun!
Most easiest way to check if the tweak script works is to open terminal before installation and type:
Code:
cat /proc/sys/vm/*
After flashing the zip do the same thing again and check if the numbers have changed (which they should have done).
pastime1971 said:
tony and i have worked out a flashable zip of init.d script + build.prop mod
there are two types of installations. choose one you like.
* system installation *
buttery-system.zip : edits /system/build.prop & installs /system/etc/init.d/99tune
to revert it, simply re-flash ROM.
you have to flash this every time you flash a ROM.
* user installation *
buttery-local.zip : edits /data/local.prop & installs /data/local/userinit.d/99tune
buttery-local-remove.zip : reverts /data/local.prop & removes /data/local/userinit.d/99tune
this changes /data/ and therefore, the effect is permanent unless you change it manually, which is the reason for buttery-local-remove.zip
# do a nandroid backup always.
# it probes if ROM is GB or ICS and apply mod accordingly. (only tested on ICS. please test it and feedback on GB.)
# to check if it is working, do the following in terminal
Code:
getprop | grep dalvik
getprop cm.buttery.active
cat /proc/sys/vm/*
!!! this script is based on vork kernel installer. the credit goes to vork team (benee and kiljacken)
Click to expand...
Click to collapse
Please give pastime1971 a "Thanks" at the following post: original post by pastime1971
Credits to whom they belong:
This idea has been ported over from the G2x forum (link, by flak0).
Thanks goes to flak0 and batoo.
The original thread of the tune.sh script (by batoo) can be found here.
and of course to pastime1971 who did the most work for this great installer. Thank you so much!
What does it do?
atb1183 said:
dexopt flags:
m=y -> use mapping, optimize the dalvik code
u=n -> NOT a uniprocessor, optimize for multicores
v=n -> do Not verify , breaks some old app compatibility but dalvik get a bit more speed (tonyp: doesn't work in Android 2.3!)
o=v -> im not sure, i think this sets optimization level to the highest. but again, not sure. alternate is o=a.
might wanna look into the /proc/sys/vm/dirty_ratio tweaks, cant remember exactly and im quite surprise many roms dont have these tweaks in the init.d scripts
it specifies how much cache/junk data to keep in memory. if the ratio is high, after a while, so much crap is kept that it waste your ram and slow the phone down.
Click to expand...
Click to collapse
Manual instructions:
Read this properly! This guide requires some knowledge of editing system files and running scripts.
It wouldn't harm to do nandroid backup! I didn't do one and everything worked fine - but it's on your own risk! You have been warned!
(if your phone won't boot anymore wiping /system and reflashing your ROM should restore everything without you loosing any data).
First we need to edit some dalvik dexopt flags in the build.prop (you can do that with the build.prop app from the market):
backup your build.prop
edit your build.prop
ICS: change dalvik.vm.dexopt-flags=.... to dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
GB: change dalvik.vm.dexopt-flags=.... to dalvik.vm.dexopt-flags=m=y,o=v,u=n
right below add: dalvik.vm.execution-mode=int:jit
ICS only: change windowsmgr.max_events_per_sec=... to windowsmgr.max_events_per_sec=300
comment out dalvik.vm.heapgrowthlimit if it exists by placing a # in front (or delete the whole line).
save
Now Reboot to Recovery and Wipe Dalvik + reboot
Now you need to download and extract the attached tune.sh script and place it into /sdcard
Either run the script with Terminal Emulator or with the Script Manager app (don't forget to use root)
For the first method: Open the "Terminal Emulator" app and type:
Code:
su
cd /sdcard/
sh tune.sh
You're done. But you need to run the script after every reboot - or just place it under /system/etc/init.d/, rename it to "90tune" and set the permission to "rwxr-xr-x", then it will run automatically at each reboot.
Have fun!
@tonyp....
well just that I am a bit busy at office and saw ur thread fortunately....I would wait for people to give their comments, experience on GB (as I use DJ 1.5 beta from Carburano )and also the CWM flashable file so I dont need to do all that hardwork and reserve that for the office
Thanks once again mate
As soon as I'm able I will try and test this on GB and ICS. Maybe in the evening.
Thanks for bringing this to our attention Tony
Sent from my LG-P990 using XDA
tonyp said:
I'm "porting" over some information from the G2x forum (link) which should possibly help against the well known decreasing speed of the phone after some uptime.
At the G2x forum they're pretty excited and talking from buttery smoothness.
Thanks goes to flag0 and batoo.
The original thread of the attached script (by batoo) can be found here.
Read this properly! This guide requires some knowledge of editing system files and running scripts for now.
Edit: Good news, I linkes an app to edit the build.prop and included instructions how to run the script. Now it's pretty straightforward and you should be done in 10-15minutes.
It would be possible to create a flashable zip which does these steps for you, but creating a script which edits values in the build.prop isn't that easy and takes some time. If it works well it will get incorporated by the ROM devs anyway - owain already said at the G2x forum that he will include it in a later build.
It wouldn't harm to do nandroid backup! I didn't do one and everything worked fine - but it's on your own risk! You have been warned!
(if your phone won't boot anymore wiping /system and reflashing your ROM should restore everything without you loosing any data).
First we need to edit some dalvik dexopt flags in the build.prop (you can do that with the build.prop app from the market):
backup your build.prop
edit your build.prop
change dalvik.vm.dexopt-flags=.... to dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
right below add: dalvik.vm.execution-mode=int:jit
change windowsmgr.max_events_per_sec=... to windowsmgr.max_events_per_sec=300
comment out dalvik.vm.heapgrowthlimit by placing a # in front (or delete the whole line).
save
Now Reboot to Recovery and Wipe Dalvik + reboot
Now you need to download and extract the attached tune.sh script and place it into /sdcard
Either run the script with Terminal Emulator or with the Script Manager app (don't forget to use root)
For the first method: Open the "Terminal Emulator" app and type:
Code:
su
cd /sdcard/
sh tune.sh
You're done. But you need to run the script after every reboot - or just place it under /system/etc/init.d/, then it will run automatically at each reboot.
Have fun! Works like a charm for me!
I only tested it with CM9 (owain build #77).
If you want to test that out in GB (either Stock or CM7) you probably shouldn't touch "windowsmgr.max_events_per_sec" (don't do step 5 above!).
Please give some feedback!
Click to expand...
Click to collapse
Thanks bro its flak0 though lol
Sent from my LG-P999 using xda premium
Crashing my Cm7 ROM
Goodmorning,
Ive just tried the tweak, but it just crashed my Phone. After updating the Build.prop the phone, just wouldnt start up anymore.
Restored backup.. and up and running again!
Im running Temasek CM7.
Just so you know!
Regards!
WyCkson
wyckson said:
Goodmorning,
Ive just tried the tweak, but it just crashed my Phone. After updating the Build.prop the phone, just wouldnt start up anymore.
Restored backup.. and up and running again!
Im running Temasek CM7.
Just so you know!
Regards!
WyCkson
Click to expand...
Click to collapse
I'm pretty sure this is cm9 ics only as it says ics in the title.
Sent from my Optimus 2X using XDA
Shadowchaz said:
I'm pretty sure this is cm9 ics only as it says ics in the title.
Sent from my Optimus 2X using XDA
Click to expand...
Click to collapse
OP states: 'If you want to test that out in GB (either Stock or CM7) you probably shouldn't touch "windowsmgr.max_events_per_sec" (don't do step 5 above!).'
Ximo F. Verde said:
OP states: 'If you want to test that out in GB (either Stock or CM7) you probably shouldn't touch "windowsmgr.max_events_per_sec" (don't do step 5 above!).'
Click to expand...
Click to collapse
You are right, missed that line! Thanks for clarifying.
flak0 said:
Thanks bro its flak0 though lol
Click to expand...
Click to collapse
lol sorry for that
I tried it with owain 78, I placed the script in init.d after editing build.prop and before rebooting, and it works perfect for now, no lag at all. Thanks tonyp,
Enviado desde mi LG-P990 usando Tapatalk 2
Tried on XXmrHyde's unnoficial 8 - works likec harm - that's great!
sergiob8 said:
I tried it with owain 78, I placed the script in init.d after editing build.prop and before rebooting, and it works perfect for now, no lag at all. Thanks tonyp,
Click to expand...
Click to collapse
Make sure to set the permission to rwxr-xr-x
Code:
chmod 0755 /system/etc/init.d/tune.sh
DAMN! Went back to CM7 because of this lag.
CM9 was unusable for me because I needed my phone to run properly at work.
I'm some kind of forced to flash
Don`t feel a need to do anything like that for CM7
Runs like a charm for the last few days.
I created a flashable zip to install the tune.sh script into init.d: http://d-h.st/NFq
You still need to manually edit the build.prop. I probably won't create an installer for that because this will probably get incorporated into the ROMs anyway.
tonyp said:
I created a flashable zip to install the tune.sh script into init.d: http://d-h.st/NFq
You still need to manually edit the build.prop. I probably won't create an installer for that because this will probably get incorporated into the ROMs anyway.
Click to expand...
Click to collapse
i was forced to get back to CM7 like others cause of this lag... will try this script later but
thanks a lot man, good to see people like you helping comunity.
it works for me, system is very fast
BUT google play store force closes instantly -.-
Player9446 said:
it works for me, system is very fast
BUT google play store force closes instantly -.-
Click to expand...
Click to collapse
After manual method, my play store still works flawless
Sent from LG 2X using Tapatalk 2 Elite
Player9446 said:
it works for me, system is very fast
BUT google play store force closes instantly -.-
Click to expand...
Click to collapse
Clear market data. Are you using cwm touch?
Sent from my LG-P990 using XDA