Related
Is it possible to have a phone that can't enter recovery mode?
My phone is rooted and I can enter recovery mode through Rom Manager but I can't get there by holding volume+- and power. I'm afraid some day I might mess up my phone and be unable to fix it because I can't enter recovery or download mode.
Am I just doing it wrong, or are there phones that cant?
I'm still within 30 days of my phone purchase, should I exchange it?
Same here. I can't get the phone to boot into recovery to update packages to install root. Any suggestions would be appreicated. I just exchanged my phone for a second time for a media player crashing issue, I called AT&T and they told me to bring it in for exchange. I can't get the new one to boot into recovery.
Mine only seems to work if I plug in a usb cable while holding the buttons though I'm sure I just haven't found the right timing the usb cable seems to help for some reason. And no I'm not getting confused with download mode.
Sent from my SAMSUNG-SGH-I897 using XDA App
Rhiannon224 said:
Same here. I can't get the phone to boot into recovery to update packages to install root. Any suggestions would be appreicated.
Click to expand...
Click to collapse
I was able to root using the one click root method, the one that's stickied in the development forum. It doesn't require you to manually boot into recovery mode.
Rhiannon224 said:
Same here. I can't get the phone to boot into recovery to update packages to install root. Any suggestions would be appreicated. I just exchanged my phone for a second time for a media player crashing issue, I called AT&T and they told me to bring it in for exchange. I can't get the new one to boot into recovery.
Click to expand...
Click to collapse
Hmm I guess I should exchange my phone. What should I say? "I can't get my phone to boot into recovery mode, I need a different one please." lol
jbblue1 said:
I was able to root using the one click root method, the one that's stickied in the development forum. It doesn't require you to manually boot into recovery mode.
Click to expand...
Click to collapse
I downloaded the oneclick however it is a .rare file and I can not extract the data with my pc for some reason. This is not my first time rooting a Captivate either so I have the tools and drivers. I just can't get into recovery mode and I am frustrated because without root I can not access my backup of Titanium or ClockworkMod.
I also am having problems getting into recovery.. Just got my phone today... I've tried about 30 times, and it absolutely will not go into recovery mode.
Works every time for me if i power off. Hold down volume up and down and power. Wait for the att screen to go off and as soon as it comes back on the second time let go of the power button and continue holding both volume button down until you see recovery booting. It works the same with a usb cable plugged in for download mode.
have you tried to get into recovery via adb , i always found that way a lot easier then pressing those buttons, pressing the buttons always hurt my fingers too much anyways.
From terminal in tool in the android sdk directory, you can do adb reboot recovery
smokestack76 said:
Works every time for me if i power off. Hold down volume up and down and power. Wait for the att screen to go off and as soon as it comes back on the second time let go of the power button and continue holding both volume button down until you see recovery booting. It works the same with a usb cable plugged in for download mode.
Click to expand...
Click to collapse
i had the exact same issue of mine not working.. somewhere i had read it was to only hold down the UP arrow, not both up and down. I Just did exactly as you said and it worked perfect.
I am on my 3rd Captivate and it appears that the last two won't go into recovery mode using the button combo at all. My first Captivate did with ease, go figure.
smokestack76 said:
Works every time for me if i power off. Hold down volume up and down and power. Wait for the att screen to go off and as soon as it comes back on the second time let go of the power button and continue holding both volume button down until you see recovery booting. It works the same with a usb cable plugged in for download mode.
Click to expand...
Click to collapse
Thanks I did it as you stated and it worked on the first try. Thanks a lot, you just saved me from agonizing over making changes to my phone in fear of not being able to get to the recovery screen.
If people are still having problem is suggest
1 turn off phone
2 count to 30
3 pull battery
4 putt in battery
5 hold both +,- vol buttons and the power
6 let go of power button when you see the att screen
Note: if that doesn't work than in step 5 hold the - vol and the power only or try to hold the + vol and power only.
Hope that helps even though it was said in the thread b4. Im just trying to make it clear
I've tried vol +&- with power.
vol - with power
vol + with power
I've tried letting off power at the at&t screen. I've tried one click root.
Nothing is working.
Edit: Lol, win 7 needs x64 drivers then I got it done through sdk. Still no hardware recovery boot though.
any chance this would work for our phones? Samsung Galaxy S Vibrant (GT-I9000) Software Upgrades for Handsets with Original Production Software
.by Samsung Mobile Canada on Thursday, September 16, 2010 at 4:14pm.A software upgrade is now available for Bell Mobility Galaxy S Vibrant handsets, provided the device has original production software (JG9). The latest version of Kies has been tested and will resolve the three-button recovery issue
I've read on a forum once(can't remember where) that there are different models of the at&t captivate, some ship without the ability to use the buttons to boot into recovery/download. It also said that if you call at&t and tell them you want a phone that boots into recovery they'll send you one.
I told them that this was one of the principal reasons that I won't be keeping my Captivate. I returned mine today (the second one i have had, and after a Nexus One and EVO as well).
Ok i had the same problem i broke the screen on my captivate went to at&t
did a upgrade went to root it and could not get into recovery after reading all the
post and calling samsung (what a wast of time) i took the back cover off my broken phone looking for numbers what i found was a batch # under the sn#
my old phone had 1007# my new phone had a 1008# went back to at&t we looked
at all the captivates until we found a 1007# poped in a battery and went right in
to recovery i'm thinking mabe the new batch# had something different but it worked for me thought i would share
The ota update fixes this issue.
C3P0LOL said:
The ota update fixes this issue.
Click to expand...
Click to collapse
Which update? The JH7 one? I can't boot into recovery either. I'm running JH7 on an AT&T Captivate unlocked and using it on Rogers in Canada, with "1008" on the back of the phone. Maybe they DID remove recovery mode since the "1007" phones?
EDIT: 3-button combo fixed using C3P0LOL's fix.
There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all
An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!
and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down
That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.
I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable
i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.
Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!
SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories
yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Hello all,
So I got a broken HD7 for cheap off of ebay. I think it's stuck in demo mode, and I'd like to flash it's ROM. I'm using it for a dev phone, so I don't need most of the functionality of the _phone_ part.
The problem is that the volume buttons are broken, so getting into bootloader mode isn't possible via holding the down volume button during power up. I think I saw another method some where, but I can't find it again...
Is there another way to get the phone into bootloader mode?
I found a link to a EnterBootloader.exe file but the thread didn't have instructions on how to use it.
If not, and my memory isn't wonky, what is the other method?
Hi um I'm pretty new to Android phones, and my Captivate's stuck in a bootloop...
I had CyanogenMod 9 on it, based on ICS 4.0.4, which i still have the .zip for if necessary. But I think I did something stupid... in the recovery (which said something about CWMrecovery) mode, I absent-mindedly formatted the /system directory... derp....
Now basically the phone shows the AT&T logo, then shows some kind of recovery screen, it only flashes up for a short time but I can see in the background both an android, like stock recovery mode, and the logo from ROM manager (or something very similar). There is some text at the bottom but it's very small and only flashes up for a split second so I can't read it... and what's worse, it won't boot into recovery...
I'm not exactly sure how to even do it, but random combinations of the volume & power buttons and home.. screen-area-thing work eventually.. but it's just not working now, as i hold the buttons it either just keeps rebooting before it gets past the AT&T logo or ignoring it completely, showing the recovery screen then rebooting again anyway
Sorry it's kinda long.. I tried to be detailed XD
tl;dr CM9 rom Captivate, formatted /system, stuck in bootloop, recovery mode won't work
Any help would be much appreciated
Edit: Forgot to say, I've searched around already but I haven't found anyone else who's bootloop is caused by formatting /system -.-
re flash the rom. you erased the rom.
dont wipe dont format just flash the rom again. you should be back as if it never happened.
If your in a boot loop you might want to invest in a jig, only $6 on eBay
You also said recovery doesn't work? Have you tried putting it into download mode?
Sent from my SGH-I897 using Tapatalk 2
This might help you:
http://forum.cyanogenmod.com/topic/39685-stuck-on-boot-loop/
If not google Samsung captivate boot loop. Lots of info on how to fix out there. Sorry I don't work on many Samsung phones. Primarily HTC.
Sent from my Inspire 4G using XDA
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
TRusselo said:
jig will not help boot loop
Click to expand...
Click to collapse
You sure? Fixed my phone from boot loop!
Sent from my SGH-I897 using Tapatalk 2
TRusselo said:
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
Click to expand...
Click to collapse
Tried that, isn't working :\ it just ignores it, shows the recovery screen realy quick then reboots again...
I've had this happen on my captivate...only option is to flash back to a stock ROM and work your way back up to CM9 or whatever you were trying to flash originally. To do this your gonna have to get into download mode. A jiff is your best friend in this situation as suggested by several others. however if the button combo for download mode works for you, that is best. Try unplugging the battery, wait for like 10 seconds and plug back in. Have a PC running, and make sure you have the drivers installed. have the USB cable plugged into your computer, and while holding both the volume buttons down, plug the cable into your phone as well. This should put you into download mode and your good to go.
Sent from my SGH-I897 using XDA
thanks cmilldrummin (and everyone else)
I got my phone into download mode fine... but i don't think I have the drivers :s (googling still, but can't find them so far)
Also I got it into recovery mode earlier, re-flashed the same custom ROM but when I tried to load it it just kept loading with the blue android on a skateboard until the battery ran out (It was the same one, CM9)
Is the like actual android system openable in download mode? so I could re-write the /system folder? if not I guess I'll just try to re-flash a stock rom then upgrade.. *crosses fingers*
Best way is to flash back to stock and start fresh.
Sent from my Serendipity VII flashed Captivate using xda premium
Np Dolei, but yea back to stock is best, gives you a nice clean slate, with no glitches or errors
Sent from my SGH-I897 using XDA
TRusselo is right. The other posts here are taking the sledgehammer approach for a simple fix. If you cannot get into recovery mode - you're doing it wrong, try again. reflash your rom from recovery and all done.
Dolei said:
Hi um I'm pretty new to Android phones, and my Captivate's stuck in a bootloop...
I had CyanogenMod 9 on it, based on ICS 4.0.4, which i still have the .zip for if necessary. But I think I did something stupid... in the recovery (which said something about CWMrecovery) mode, I absent-mindedly formatted the /system directory... derp....
Now basically the phone shows the AT&T logo, then shows some kind of recovery screen, it only flashes up for a short time but I can see in the background both an android, like stock recovery mode, and the logo from ROM manager (or something very similar). There is some text at the bottom but it's very small and only flashes up for a split second so I can't read it... and what's worse, it won't boot into recovery...
I'm not exactly sure how to even do it, but random combinations of the volume & power buttons and home.. screen-area-thing work eventually.. but it's just not working now, as i hold the buttons it either just keeps rebooting before it gets past the AT&T logo or ignoring it completely, showing the recovery screen then rebooting again anyway
Sorry it's kinda long.. I tried to be detailed XD
tl;dr CM9 rom Captivate, formatted /system, stuck in bootloop, recovery mode won't work
Any help would be much appreciated
Edit: Forgot to say, I've searched around already but I haven't found anyone else who's bootloop is caused by formatting /system -.-
Click to expand...
Click to collapse
TRusselo said:
re flash the rom. you erased the rom.
dont wipe dont format just flash the rom again. you should be back as if it never happened.
Click to expand...
Click to collapse
TRusselo said:
jig will not help bootloop.
you are freaking out because of the bootloop and not holding the button combo for recovery long enough.
take out the battery. and replace
hold both volume buttons
then hold power
keep buttons held for 5 seconds AFTER screen comes on.
if your phone turns on and starts to boot, you have recovery and download.
Click to expand...
Click to collapse
Try doing this, this has worked for me since I can't get into recovery with the traditional button combo method of holding all three buttons at the same time.
Turn the phone off. Hold the power button, vol up, vol down. Once the ATT boot screen comes on, let go of the power button. Keep holding the volume buttons and voila, you're in recovery.
Agree. Definitely go back to stock if possible first.
Sent from my Inspire 4G using XDA
I have a Motorola milestone (second hand) and tried to load a update for it then i noticed the following problems:
- boot looping at the android logo
-when i tried going into bootloader i get a blank black screen
-when i go into recovery and try to update using "update.zip" i get a EOCD error and another time i get a authorization error
WHAT TO DO????
Come on dude,
Just search EOCD error, I think you will find at least 15 topics.
You lost root, Nedd to flash vulnerable recovery sbf. You will find latest instructions on nadalbak site.
You can find site inside his cm7 topic. Milestone android development.
Sent from my Milestone using xda premium
i'm fairly new to the milestone side, the version that is on the phone is 2.2
Everybody's instruction is to put the phone in bootloader mode and connect to the pc but i only get a black screen and then the phone restarts hence rsd lite not picking it up
Put it in recovery and try to flash another sbf, it should work.
Trough rsd lite.
try that just now and still no response on the pc, and i know the usb port is working because i charged the phone
Are you sure your drivers for phone are correctly installed?
Explain correctly installed?
yeah so what about when i try going into boot loader and get a blank screen?
In the early development of moto driver's phone wasn't recognised by rsd lite.
I didn't hear of that problem anymore though. The solution was to reinstall / install drivers again or try on another pc.
Cable could also be a problem.
Are you trying to enter bootloader with the cable connected to phone? If yes try without and after connect it.
The cable isnt the problem, im sure of that and i tried on two other laptops but they are 64 bit windows 7 but anyways why when i press "power+vol up + camera" i only get a black screen and not black screen with other milestones?
I'm thinking thats the problem or reason why rsd lite not picking up the phone cuz its not in bootloader mode
Ahhh
It took some time since last used bootloader.
But I think is power + x for bootloader.
==== update ====
my bad that's for recovery
oky just tested:
it's power + up key from keyboard
now when i first pressed the power i got a black screen, so i pressed the power again while holding the up key .. and voila:
bootloader 90.78
battery ok
....
good luck ..
when this happened to me i was shocked so much , but then i got it fixed so yay
sigh was trying that from lastnight but no luck
Does anybody have a video to how this done because i'm wondering if i'm doing it right cuz i'm still getting black screen when trying to go into bootloader, i pressed "power + up button on DPAD" and then pressed the power button again but still black screen
While the phone is off, hold the up button on the D-pad and press the power button. Do not let go of the up button until the bootloader screen comes up.
while the phone is off? i can't turn off the phone because its just looping so i take out the battery then put it in and press up and power button so is that the right way?
Yes,
If it doesn't work, for pre 90.78 bootloader I think it was another combination of keys.
Google it
Got it all wrong, the problem was that a app was installed and then the phone was restarted then the looping start at the android sign
no luck, the ways i see is the same as urs
reesieBennett said:
Got it all wrong, the problem was that a app was installed and then the phone was restarted then the looping start at the android sign
no luck, the ways i see is the same as urs
Click to expand...
Click to collapse
about the video:
found this on youtube:
bootloader:
http://www.youtube.com/watch?v=xjQcvg3Eplc
recovery:
http://www.youtube.com/watch?v=H3Vl9NbU6Ag&feature=related
if you enter recovery try wiping everything / factory reset and see if it get into android.
other than this i haven't got any other idea,
it is possible to reboot it with adb if you got a rom that supports adb at boot. ex CM7. cm6 and froyo rom not sure but this is a long shot.