Database Develop

[Q] Pc/Odin Problem

Hi all,
I'm trying to use Odin to install Darky's 10.2 re following the guide posted on Darky Rom forum.
The problem is when ever I hook up the usb cable to my phone in download mode windows tells me that the usb device has malfunctioned and Odin can't see it. If I hook the phone up in normal mode Odin does see it, but obviously can't do the installation.
I've tried from changing usb ports, changing usb cable, re-installing kies drivers, turning kies off in processes, I don't know what else to try...
I'm currently running Darky's 9.5 ee, Firmware 2.2.1, bsaeband I9000xxjve, kernal 2.6.32.9, build no. Darky's v9.5.wjs8.
Any help/suggestions please????
Thanks
B.

Maybe try it?
USB Drivers x64
or
USB Drivers x86
And something else. If you want the Darky 10.2 (2.3.4), you need to flash JVQ then Darky

Which version of Odin are you using?
I always use Odin3 v1.3 as some people reported crashes using Odin3 v1.85..

Guys,
Thank you for the replies!!!
I forgot to mention that I have also tried heimdall on my mac, with the same results, I'll give the drivers a go but not sure they'll work....
I'm using odin v1.3 on my laptop but have also tried v1.7
The mac and the laptop both see the phone when it's in normal mode, but not when it's in download...
Thanks,
B.

I tried to download the drivers, but there are so many files there I'm not sure how to proceed, any suggestions?
Thanks,
B.
P.s sorry for being such a noob!!!!

Hi again,
If there is anyone out there running windows xp could they possibly hook their phone up in download mode, go to device manager and tell me what drivers are listed please.
If I hook my phone up in normal mode I have 3 drivers present, if I hook it up in download mode I don't have any...
Thaknks
B.

change the usb to another conection in the pc.

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)

Try to reinstall or install a usb driver from samsung

tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon

Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!

yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon

Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?

Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000

GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...

iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000

odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks

My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.

BUMP
Any solution to this given the fact that usb drivers have been installed?

Are you sure it is recognised by the computer before trying Odin or Heimdall?

I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.

farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!

help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen

blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???

i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] Samsung Galaxy S stuck on boot screen

Hi, i'm noob in Galaxy Flashing so this is my problem:
I have a Samsung Galaxy S GT-I9000 blocked from italian carrier.
Few times ago i tried to enable 3-buttons download/recovery mode installing Aries_P-SBL.tar.md5 with Odin. The installation finished successfully but the download/recovery mode still didn't work.
After some reboots (where the phone worked right), now the phone stucks in the boot screen (the one with Galaxy S GT-I9000 SAMSUNG).
With the JIG i can enter download mode but my computer can't detect the phone (Windows feels my USB connection but Odin does not detect it).
If i connect the phone to the computer in normal mode (not in download mode, so with stuck screen), Kies can detect the phone but says that it can't talk with phone in this way(like if it was in USB Debug mode).
I Hope someone can help me

Restart your computer>>>Go to task manager and close all Kies applications (I usually have 2 Kies running from startup)>>>Start Odin and select all the files>>>Put your phone into download mode and connect>>>It should be detected now.
If it is still not detected, close odin, disconnect phone. Start Kies go to tools and install drivers. Once this is complete. Close Kies and start from the top of this post...restart...

Solution Is HEIMDALL.....
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.

I'm Here...
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.

Try to reflash your phone normaly with another Rom, it should work

peter_dizai said:
Here Comes your solution:
You can easily back your phone with Heimdall.
It's a flashtool which is more complicated than ODIN.
If interesting,simply PM me and we will do it.
Click to expand...
Click to collapse
Sorry, your advice didn't work, Odin still doesn't detect the phone

Try to change the USB port and install ONLY the phone driver -if you don't find you can contact me.
Inviato dal mio GT-I9000 usando Tapatalk

I don't understand, your download mode works?
Sent from my Galaxy S with ICS 4.0.4 (Italy)

he said download mode works but odin cant detect the phone .
Try reinstalling the samsung usb drivers and/or try from another pc and see if it shows the same thing (meaning nothing) .

Hi,
sorry but i tried all the ways, Odin and Heimdall.
I tried Odin on Windows and Heimdall on MacOSX but always they say
"Failed to detect compatible download-mode device."
I'm sure that phone is in download mode
May i install drivers on OSX with Heimdall?
I have not original samsung USB cable, but i think this is not a problem

Rooted my GT-I9000, and now it has crashed!
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..

Getting Hopeless...?
1)For you to become sure,my Galaxy S Aka I9000 was exactly the same as yours and right now there is nothing wrong with that of course after flashing by HEIMDALL.
2)Remember,if your are going to do anything,Your first and your last key,is your HOPE so be so hopeful and let's start to get over this.
3)Download I9000 USB driver from here and simply install it on WINDOWS OS.
http://hotfile.com/dl/48893334/93383a1/I9000_USB_driver.rar.html
4)Before Using Heimdall, Enter it's folder and you'll see another sub folder called driver and you'll see just ONE executable program,run it and follow these instructions:
(I'll Shortly Provide You A How-to)
5)Enter Heimdall and follow these instructions:
(I'll Shortly Provide You A How-to)
6)Flash firmware
7)Enjoy
8)Press my THX Button.
---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------
Ghoststavanger said:
First off all my Galaxy I9000 was trying to software update via Kies, and it failed. The it would not start, but i managde to root it with a stock "VOD" rom.. But after a while i wantet to root it back to "Nordic Version"... But i could not do this, because the 3 button combo dont work on my Galaxy I9000 anymore.. :/ So there for i baought a USB JTAG, that puts it into download mode. So far, So good But when it is finished rooting, it fails to mount/unmount a bunch of stuff.. I have a picture of the screen, so that you guys can se what the problem is. I have tryed to root it with the same version that worked before, but it dont work. I have also tryed with som pit files, and so on... I give up, i need help with my Samsung Galaxy S - GT-i9000. Please help me out with this..
Click to expand...
Click to collapse
Ok,Right now I'm here and you are so damn lucky.
1-Simply put your phone into download mode with your cable.
2-Change your cable with an standard Samsung cable.
3-Download a stock firmware which contains 3 files(PDA,Phone,CSC)
4-Load Odin and flash the firmware.
5-All Done,How lucky Your Are.....
6-Feel Free to hit my THANX...

peter_dizai said:
Well,first go to here:
http://forum.xda-developers.com/showthread.php?t=755265
Second: Download 7-zip PC software & extract your official md5 firmware to obtain several other files.
Third:Search the web for a Heimdall How-To(if you didn't find,I'll provide You links)
Last:You'll flash the firmware via Heimdall & again your peace of mind will be back.
Click to expand...
Click to collapse
I tried your method but heimdall says that it can not find a connected download-mode device. My device is in download mode, i put it in this mode with JIG

Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??

espinho said:
Hi, excuse my for my stupid question,
there are problem in flashing with non original Samsung USB cable? Isn't it the same with any Micro USB adapter??
Click to expand...
Click to collapse
generally no, but I recommend strongly to try another micro USB-Cable & another USB Port!

No one of these method does work for me,
any suggest?? my main problem is that the pc does not detect the phone when it's in download-mode. I know how to flash it, but there is not a program that can talk with it!

Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)

mrchat9 said:
Can you try to make the operation on another computer?-install usb driver first...
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
i'll try and i'll make you know

At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)

Solved
mrchat9 said:
At this time maybe an operating system problem...I'm waiting for your answer!
Sent from my Galaxy S with ICS 4.0.4 (Italy)
Click to expand...
Click to collapse
Hi, changing computer worked. I tried on OSX and didn't work, on Windows 7 on VMware Fusion and didn't work. After all, i tried on a laptop with Windows XP and it solved my problem. Now i get a mobile network error, with one carrier it works and with another it does not. The mobile network detected is always really low.

Odin not recognize my SG I9000 in download mode

Hi. After official upgrade with Kries, from Froyo (2.2) to Gingerbread (2.3.6), Odnin won't recognize my phone (SG I9000) in download mode. Also, now in download mode get message "Can't access to /system/csc/SWC/system", When phone boots up in normal mode, odin recognize phone properly and in odin get message "ADDED". Kies also recognize phone. Window also recognize phone properly.
I tried on three different PC, three different USB cable, reinstall drivers and nothing changed.
I want root phone and install unofficial ROM. Now, is there now any way install to root phone and install another ROM ? Tnx

strider_sd said:
Hi. After official upgrade with Kries, from Froyo (2.2) to Gingerbread (2.3.6), Odnin won't recognize my phone (SG I9000) in download mode. Also, now in download mode get message "Can't access to /system/csc/SWC/system", When phone boots up in normal mode, odin recognize phone properly and in odin get message "ADDED". Kies also recognize phone. Window also recognize phone properly.
I tried on three different PC, three different USB cable, reinstall drivers and nothing changed.
I want root phone and install unofficial ROM. Now, is there now any way install to root phone and install another ROM ? Tnx
Click to expand...
Click to collapse
Did you turn on "USB Debugging" in settings > applications > development > usb debugging?

strider_sd said:
Hi. After official upgrade with Kries, from Froyo (2.2) to Gingerbread (2.3.6), Odnin won't recognize my phone (SG I9000) in download mode. Also, now in download mode get message "Can't access to /system/csc/SWC/system", When phone boots up in normal mode, odin recognize phone properly and in odin get message "ADDED". Kies also recognize phone. Window also recognize phone properly.
I tried on three different PC, three different USB cable, reinstall drivers and nothing changed.
I want root phone and install unofficial ROM. Now, is there now any way install to root phone and install another ROM ? Tnx
Click to expand...
Click to collapse
1. Rooting GT-I9000 2.3.6 [India DD JV7 / JVB]
2. Flashing To Original Rom - Using Odin on GT-i9000
3. Installing Jelly Bean 4.1 on Galaxy S GT-I9000
4. Flashing To Original Rom - Using Heimdall on GT-i9000
5. Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
6. Rooting GT-I9000 2.3.3 [India DDJV9]

Thanks for answers. I found solution. After I was done fresh install windows, everything goes fine. It seems, problem was in usb drivers on all PCs...weird. It is only important that it is all right now. Thanks again for help!

probably the drive didn't work
Sent from my GT-I9001 using xda premium

wfc2502008 said:
probably the drive didn't work
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Yep, you're right.

[Q] help me pls

i got samsung s3 mini GT - I8190 made in korea the problem is download mode dont work even odin cant detect it when i plug it on usb i realy want to root it and install CWN please help me how to root it
baseband I8190XXAMA2

Did u have USB debugging on? Im not sure if that will do but its worth a shot.
Sent from my CM10.1 SGH-T599

Yes its on..!!
Sent from my IM-A760S using xda app-developers app

Usb debug doesn't matter in download mode.
Use original cable, usb on the back of the computer. If you're on laptop just try another usb.
Make sure you got samsung usb drivers installed. If you got kies installed, make sure you kill all process with kies in taskmanager before you open odin.
Put phone in download mode, connect to computer, open odin.
Otherwise you can check out the one-click-root in general section, then download rommanager to put cwm in your phone.
Good luck.

sometimes the samsung drivers cause problems.
Use THIS.
Good luck

[ This is only a hint and not a question! ]
I had the same problem with Windows 8.1 x64.
Different driver, Administator rights and much more didn't help.
With Windows 7 x64 odin work perfect. :good: