Related
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
myankt2t said:
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
Click to expand...
Click to collapse
Download kies reinstall drivers
Sent from my GT-N7000 using xda app-developers app
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry if its in wrong section
I tried every option you mentioned no luck
My screen some time shows fluctuation too i bought this phone yesterday i previously used galaxy s
And random reboot and random discharging
ok try to instal gb rom, official, see dr ketans thread in sticky section development, and check if it works there
edit WAIT! read comment below
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No luck bro.
thing i have done so far
Flashed stock rom via odin
re installed Kies
Re installed usb driver:crying:
factory reset
inurb said:
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Click to expand...
Click to collapse
Manually mount how to do this ?
myankt2t said:
Manually mount how to do this ?
Click to expand...
Click to collapse
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
inurb said:
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
Click to expand...
Click to collapse
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Please help me its been 3 days countless effort no result
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
rraaka said:
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
Click to expand...
Click to collapse
i didn't done hard rest it's not working :|
i m on window 7 :|
i also rooted tried custom rom still not working tried diff pcs and cables
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
LoVeRice said:
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
It showing 7CDCS device and not updating
rraaka said:
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
Click to expand...
Click to collapse
i have done that no luck
myankt2t said:
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Click to expand...
Click to collapse
compressed air or a qtip dipped in rubbing alcohol.
hello everybody. i have got a problem conecting my phone to pc. i am on cm 10.1 . when i conect my phone to pc it only charge. i download again the drivers but nothing happen. i try to an other laptop ...the same. try different cables the same.. reflash rom with all wipes, nothing. i am on cm kernel.. is it hardware problem of micro usb port?? any ideas will be welcome. thank you
andreasarxon said:
hello everybody. i have got a problem conecting my phone to pc. i am on cm 10.1 . when i conect my phone to pc it only charge. i download again the drivers but nothing happen. i try to an other laptop ...the same. try different cables the same.. reflash rom with all wipes, nothing. i am on cm kernel.. is it hardware problem of micro usb port?? any ideas will be welcome. thank you
Click to expand...
Click to collapse
1. Kill yourself! Wrong section
2. Other micro usb cable
3. Reinstall drivers http://is.gd/G6P4Ej
TheNoticer said:
1. Kill yourself! Wrong section
2. Other micro usb cable
3. Reinstall drivers http://is.gd/G6P4Ej
Click to expand...
Click to collapse
i have tryied your 2nd and 3rd solution but nothing.. maybe i should try 1st!!
Did you tried to go into settings/memory/menu(or something like that-I don't remember anymore) and turn on usb storage?
...from SG NOTE N7000 with Tapatalk 2
andreasarxon said:
i have tryied your 2nd and 3rd solution but nothing.. maybe i should try 1st!!
Click to expand...
Click to collapse
please dont life is to precious
In settings somewhere you might have to enable usb mode
Settings > Developer Options > USB Debugging.
aurator said:
Settings > Developer Options > USB Debugging.
Click to expand...
Click to collapse
that should be turned off...
no I mean other setting, like mtp mode or something alike
baz77 said:
that should be turned off...
no I mean other setting, like mtp mode or something alike
Click to expand...
Click to collapse
it should be in settings>storage then hit options and change to mass storage
best let him look, hell discover a ton of other stuff
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Because developer mode isn't enable,
Setting --->About Phone--->hit build number 7 times.
Settings -->Developer options--->Android Debugging
rock on.
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
Turn on USB debugging, while connecting your device to system, reboot it without disconnecting. Also if it prompt for RSA key access check always allow this computer and accept it....
Sent from my MB886 using xda app-developers app
No dice
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.
tanos0415 said:
Tried your suggestions, guys. But its still not working.
I tried the 7 clicks. It showed that I have developer access. Then I turned on USB debugging and restarted the phone. No notification about USB debugging, my computer still doesn't detect it.
Click to expand...
Click to collapse
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.
skeevydude said:
No adb/debgging is normal on the custom roms. Haven't had adb in at least 2 weeks.
Click to expand...
Click to collapse
Too bad. Does that mean that I can't use MTP mode?
tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.
hungrymr2 said:
Can you give details as to what computer/os you are running?
Does it charges when you plug the phone into the computer?
With or without developer mode enabled, your computer should still respond to the phone. If it doesn't then the problem is the computer.
Click to expand...
Click to collapse
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom
The drivers can be corrupted for no good reason try deleting and re-installing.
tanos0415 said:
Too bad. Does that mean that I can't use MTP mode?
Click to expand...
Click to collapse
Can't use MTP or Camera mode (at least on my linux box I can't). All I know is adb doesn't work and that's the only reason I have to plug into usb...I unmount my sd and plug it into my PC to do file transfers (or adb push from recovery)...adb does work in recovery, just not the system.
tanos0415 said:
Yeah its charging. Drivers tried installing but it says that it was not successfully installed. It also shows as unknown device.
I'm running Windows 7 64bit. It can detect fine back when it was stock. The problem only showed up after I installed PAC rom
Click to expand...
Click to collapse
Same things happen on my linux box...problem showed up the same time for me as well....installed a 4.2.2 rom...
//this is a known issue....related to the kernel and usb drivers (started about three weeks ago) Use an earlier, first week of June or so, kernel if you need adb/usb...thought I don't recommend doing that.
frog1982 said:
The drivers can be corrupted for no good reason try deleting and re-installing.
Click to expand...
Click to collapse
+1 try to delete them in safemode to ensure that the old drivers are gone for good.
I did try PAC once and it connected to my win 7 64bit without any issues.
Sent from my MB886 using xda app-developers app
tanos0415 said:
Hi guys. I just installed PACman ROM latest version on my previously stock Atrix HD. Now, I can't read my Atrix HD on my computer. I already installed motorola device manager and still can't read. Is there a driver that I need to install? Thanks
Click to expand...
Click to collapse
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps
Blackest Pain said:
I had this problem.
Step 1: Enter system Settings>Developer options.
Step 2: Tick "Android debugging", "USB debugging notify" (makes it easier to know if connection is successful), and change the "Root acess" setting to "Apps and ADB".
Step 3: Reboot Phone and connect to computer.
This is what I did and I haven't had a problem since. Hope this helps
Click to expand...
Click to collapse
already tried that. thanks anyway. :good:
Did you do all that And the restart the computer itself? I think I read that on another android forum (android central maybe?) That that helps sometimes...
Sent from my PACman Atrix HD using XDA Premium
hey all!
when i connect my phone to my computer i see this:
(click on the picture to see all)
and when i install usb driver its what i see: (i restart the computer)
what should i do? becuase i cant install KIES, when im install its stuck on ''Evaluating launch conditions''.
thanks for help...
sharonxd said:
hey all!
when i connect my phone to my computer i see this:
(click on the picture to see all)
and when i install usb driver its what i see: (i restart the computer)
what should i do? becuase i cant install KIES, when im install its stuck on ''Evaluating launch conditions''.
thanks for help...
Click to expand...
Click to collapse
try this latest samsung usb drivers download https://mega.co.nz/#!DdkViSSY!NhevSos2RcEQql4L4zovgyTyZUJKWJbdWeWmwOh0UbM
uninstall first old one
MaHo_66 said:
try this latest samsung usb drivers download https://mega.co.nz/#!DdkViSSY!NhevSos2RcEQql4L4zovgyTyZUJKWJbdWeWmwOh0UbM
uninstall first old one
Click to expand...
Click to collapse
thanks you for replay
i still get the same problem...
sharonxd said:
hey all!
when i connect my phone to my computer i see this:
(click on the picture to see all)
and when i install usb driver its what i see: (i restart the computer)
what should i do? becuase i cant install KIES, when im install its stuck on ''Evaluating launch conditions''.
thanks for help...
Click to expand...
Click to collapse
try to install drivers from this thread: http://forum.xda-developers.com/showthread.php?t=961956
LeoDeos said:
try to install drivers from this thread: http://forum.xda-developers.com/showthread.php?t=961956
Click to expand...
Click to collapse
thats what i did i dont have any drivers XD
So now i have no os..just recovery and bootloader...and when i enter to fastboot my pc dsnt recognize the phone..what can i do? to install the driver so my pc will recognize the phone and i can sideload a rom?..
Diaze said:
So now i have no os..just recovery and bootloader...and when i enter to fastboot my pc dsnt recognize the phone..what can i do? to install the driver so my pc will recognize the phone and i can sideload a rom?..
Click to expand...
Click to collapse
If your on windows 7 you can use the guide in post 2 here
http://forum.xda-developers.com/showthread.php?t=2541082
If you using Windows 8.1 you can use the Driver hack I use
posted here http://forum.xda-developers.com/showthread.php?p=49131915
The file you use is here http://forum.xda-developers.com/attachment.php?attachmentid=2500592&d=1389122072
I repeat this is a REALLY DIRTY solution that may harm your system, personal data, hardware and/or cat.
Here are the steps:
0. Have a Linux or Windows LiveCD just in case something goes wrong
1. Download and extract files from attachment
2. Navigate to the folder corresponding to your system version (x86 = 32-bit, x64 = 64 bit)
3. Right-click franken-usb.bat and click "Run as Administrator"
5. Wait for it to finish and reboot the system. If everything went fine, you will boot your system successfully
6. Install ADB/Fastboot drivers just like on Windows 8
7. Connect your phone in Fastboot mode to your USB 2.0 port and check if it works
8. Enjoy and wait for official fix
How does it work:
It's not any kind of magic - it just replaces Windows 8.1's usbhub.sys and usbport.sys with Windows 8's ones.
Old files don't check for BOS descriptor so Fastboot can work.
Script updated - it should now actually copy the files but please double check if files were copied to C:\Windows\system32\Drivers!
Hope it helps you!
Regards!
Click to expand...
Click to collapse
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Diaze said:
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Click to expand...
Click to collapse
Fix your drivers
I post 2 links on fixing your drivers
FAQ:
1) Q: I'm using Windows 8.1 what should I worry about
(continue reading FAQ)
2) Q: I'm using Windows 7 what should I worry about
Click to expand...
Click to collapse
Diaze said:
I dont want to go to stock...i just want to flash any rom so my phone will boot...i have twrp installed..and i want to sideload any rom..but my pc dsnt recognize the phone..it dsnt show fastboot_usb...and my pc say unknown device.. sry for my english
Click to expand...
Click to collapse
not the guide, just the Frequently Asked Questions (FAQ #2): http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
it says unknown device...I installed the drivers from that faq...but still dsnt work
http://postimg.org/image/ijgbndbrd/ screenshot
http://postimg.org/image/bp2wgyabz/
Diaze said:
it says unknown device...I installed the drivers from that faq...but still dsnt work
http://postimg.org/image/ijgbndbrd/ screenshot
http://postimg.org/image/bp2wgyabz/
Click to expand...
Click to collapse
have you tried manually updating the driver as mentioned in FAQ #2??
nkk71 said:
have you tried manually updating the driver as mentioned in FAQ #2??
Click to expand...
Click to collapse
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Diaze said:
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Click to expand...
Click to collapse
uncheck show compatible hardware
the find HTC corporation in the list and choose the My HTC driver 2.07
Diaze said:
http://postimg.org/image/ut0hqi26d/ look..
when I try to manually update
Click to expand...
Click to collapse
if you are sure that's the device, then uncheck "show compatible devices"
why don't you uninstall the driver, unplug phone, reboot PC, plug phone in, see what it gives then
clsA said:
uncheck show compatible hardware
the find HTC corporation in the list and choose the My HTC driver 2.07
Click to expand...
Click to collapse
I don't have htc corporation on the list...
nkk71 said:
if you are sure that's the device, then uncheck "show compatible devices"
why don't you uninstall the driver, unplug phone, reboot PC, plug phone in, see what it gives then
Click to expand...
Click to collapse
I ll try that too
Diaze said:
I ll try that too
Click to expand...
Click to collapse
still nthing..
I don't use the original usb cable from htc one..can this be the cause?
Diaze said:
still nthing..
I don't use the original usb cable from htc one..can this be the cause?
Click to expand...
Click to collapse
could be... try an original/other cable and different usb2 ports
ok now it shows fastboot_usb..I fixed it by using the original cable..
so now what is the next step? I don't have adb or anything installed? how to install the new rom?
Diaze said:
ok now it shows fastboot_usb..I fixed it by using the original cable..
so now what is the next step? I don't have adb or anything installed? how to install the new rom?
Click to expand...
Click to collapse
seriously??
these are the ones i run on windows: mini-sdk-1.0.31-windows.rar
as for getting rom onto your phone: check the Frequently Asked Question sticky page 3
nkk71 said:
seriously??
these are the ones i run on windows: mini-sdk-1.0.31-windows.rar
as for getting rom onto your phone: check the Frequently Asked Question sticky page 3
Click to expand...
Click to collapse
I downloaded htc one plus one rom and when I try adb sideload ROM.zip it says ``sending rom.zip 1%..at it gets stuck at 1%...
after waiting some time it says faile to write data -protocol fault (no status)
please help
no1?
Diaze said:
I downloaded htc one plus one rom and when I try adb sideload ROM.zip it says ``sending rom.zip 1%..at it gets stuck at 1%...
after waiting some time it says faile to write data -protocol fault (no status)
please help
Click to expand...
Click to collapse
if you are now certain that the connection between your PC and phone is now stable, do step "D) Recovery showing 'unable to mount /data' or 'internal storage'" to cleanly reformat your partitions.
nkk71 said:
if you are now certain that the connection between your PC and phone is now stable, do step "D) Recovery showing 'unable to mount /data' or 'internal storage'" to cleanly reformat your partitions.
Click to expand...
Click to collapse
ok i`ll try and let u know
ps. i did step D but it still stays at 1 %..
but..can i use a otg cable to install the rom? i`ll buy a otg cable..put the rom on a usb and then flash it..is this possible??