Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
myankt2t said:
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
Click to expand...
Click to collapse
Download kies reinstall drivers
Sent from my GT-N7000 using xda app-developers app
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry if its in wrong section
I tried every option you mentioned no luck
My screen some time shows fluctuation too i bought this phone yesterday i previously used galaxy s
And random reboot and random discharging
ok try to instal gb rom, official, see dr ketans thread in sticky section development, and check if it works there
edit WAIT! read comment below
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No luck bro.
thing i have done so far
Flashed stock rom via odin
re installed Kies
Re installed usb driver:crying:
factory reset
inurb said:
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Click to expand...
Click to collapse
Manually mount how to do this ?
myankt2t said:
Manually mount how to do this ?
Click to expand...
Click to collapse
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
inurb said:
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
Click to expand...
Click to collapse
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Please help me its been 3 days countless effort no result
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
rraaka said:
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
Click to expand...
Click to collapse
i didn't done hard rest it's not working :|
i m on window 7 :|
i also rooted tried custom rom still not working tried diff pcs and cables
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
LoVeRice said:
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
It showing 7CDCS device and not updating
rraaka said:
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
Click to expand...
Click to collapse
i have done that no luck
myankt2t said:
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Click to expand...
Click to collapse
compressed air or a qtip dipped in rubbing alcohol.
Related
I am sorry to jump in but I am currently running the latest nightly and Ineed to flash bootloaders and start with Froyo again. But my computer is not detecting my phone. I have installed the Android SDK and installed the drivers for Nexus S but of no avail. i am stuck and would appreciate your help.
The funny thing is that I can use the phone as USB device but freaking ODIN is not detecting it. My windows does not has any unrecognised device. I have installed the Nexus S drivers as well. Is it a problem with ODIN or my phone or windows itself? I am running Windows 7 Enterprise 64 Bit edition.
I have tried;
Uninstalled Samsung Drivers / Restarted / Reinstalled
Swapped 2 different cords
Tried every available port on my PC
Restarted, pulled PC power cable, let it rest for a few seconds and plugged it back in
Uninstalled every USB Root Hub device and restarted so Windows could reinstall all of it
Tried Heimdall as well
I need my ODIN flashing back
Thanks in advance!
Look that Kies isn´t running in the Background.
It is not - I can confirm.
Sent from my GT-I9000 using XDA Premium App
check with usb debugging activation on your phone!
Checked that too
Loosing hope on this -Am I going to be stuck with corrupt bootloaders and other issues?
Someone ... anyone?
Sent from my GT-I9000 using XDA Premium App
Have you tried using a different computer?
Yes sir. Tried on 2 different machines, 32bit and 64bit Windows 7.
Starting to get worried!
Sent from my GT-I9000 using XDA Premium App
Bump!
Sent from my GT-I9000 using XDA Premium App
Kies has an option to install the driver again check under tools then install driver maybe that will help
neoian1277 said:
Kies has an option to install the driver again check under tools then install driver maybe that will help
Click to expand...
Click to collapse
But Kies does not recognize the phone So it does not even try to install the drivers.
I am stuck. Without ODIN recognizing my phone, i can not flash anything on it or revert to stock. Would be great to know if there is anything I can do from Recovery Mode. The phone goes to Download mode as well but what's the use.
well this is a long shot but you could try and manually install it by going into where you installed kies in my case its C:\Program Files\Samsung\USB Drivers\24_flashusbdriver choose the X64 folder seeing as you are on a 64bit system and right click FlashUSB_x64.inf and install
neoian1277 said:
well this is a long shot but you could try and manually install it by going into where you installed kies in my case its C:\Program Files\Samsung\USB Drivers\24_flashusbdriver choose the X64 folder seeing as you are on a 64bit system and right click FlashUSB_x64.inf and install
Click to expand...
Click to collapse
Nope. It didnt help either.
F***! This is frustrating.
well you could always try it on a windows xp machine maybe try another usb cable you never know
i was having this problem too till i sent it back to samsung service centre where they changed the whole board.
my computer totally couldn't recognize my sms on either odin or usb. it won't restart when not connected to charging/power.
i've got a warranty claim and now it back and rooted with gingerbread 2.3.3 jvb install.
samsung service centre is the best. with service like that i'll stay with samsung all the way.
hope my experience help.
regards,
andrew sim from kuching, sarawak,
malaysia
Sent from my GT-I9000 using XDA Premium App
an obvious question, but since no one has asked it yet, are you in the download mode ? You have to be in download mode for Odin to detect.
PhoenixFx said:
an obvious question, but since no one has asked it yet, are you in the download mode ? You have to be in download mode for Odin to detect.
Click to expand...
Click to collapse
That is not true. My Samsung Galaxy S is recognised by Odin even when on in normal mode.
andshm said:
i was having this problem too till i sent it back to samsung service centre where they changed the whole board.
Click to expand...
Click to collapse
Yeah, I ended up doing the exact same thing. Something must have gone weird, because the phone would still charge, but wouldn't be recognized by anything.
It may well be damage to usb on phone, remove the inner cover check for cracks in soldering, and check pounds aren't out of shape
If they are gently straighten with pin
Sent from my GT-I9000 using XDA Premium App
Prakash
Just Remove the battery and wait for 10 seconds......
insert battery and start in download mode...
tadaaaa.....it's done....
Did you install the drivers for Hemidall? After I did this my phone was not recognize by Odin... but I'm guessing If I roll back or update the drivers some how in Device Manager then Odin would be happy again.
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Cominox said:
Hello, so as the title say i have a usb brick, wich means my phone can't get detected by pc ( tested on win7 / win8 / xubuntu ) with different drivers and different cable.
i looked over the form for the problem but no one seems to found a solution, i'm posting this to check if someone has resolved it before ?
my main problem is that i can't get odin to detect the phone, i can't flash any stock now !! :/
anyway please give it a taught, changing Drivers , desinstall and reinstalling drivers doesn't work and i don't have any warranty on the phone.
thanks in advance for your help
Click to expand...
Click to collapse
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Anthropostar said:
Have you tried enabling usb debugging on the device?
I take it that it does charge right?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Yes i tried with usb debugging on/off and nothing, the cables charge the phone but doesn't get it to be detected
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
nokiamodeln91 said:
Not even detected in recovery? Have you tried recovery - mounts & storage - mount USB storage connected to PC?
Could be possible that the use port is broken or you need to change rom to get it working.
What rom are you on right now? If you are rooted, then use mobile odin to flash any stock rom. It also goes without saying that you will need a sd card in this case to transfer files on to the phone.
Click to expand...
Click to collapse
i was using angry ROM v3.2 and now i tried Xperia Note, same problem and thanks for the advice about mobile odin that can be usefull when needed but i just need to figure out the solution for this brick the phone isn't detected on any pc that i used not even on CWM mount and storage
Try another wire?
Tapatalking on my n7000
I can connect the phone to Kies. I reinstalled Kies, I wiped cache, rebooted the PC nothing. I tried many times connect / disconnect data cable.
What else can I do?
PS:Any advice is welcome, and if the topic is not open in the appropriate area, can a moderator to move it.
Thank you very much
What's the exact error?
Sent from my GT-I9070 using xda premium
There is an actual error but does not connect after about two or three minutes of testing.
Kies returns to the main screen as if I just opened Kies program.
I'll post and some printscreens ...
LE: Checked in Developer Options, Enable USB Debugging and Mock Locations.
As I know you can't use Kies with USB debuging ON (I see you are rooted, and you are sure turn that option ON). Turn it off and retry.
I tried it, same result.
I finished all options in trying to connect the phone to Kies.
Suggestions?
R_a_z_v_a_n said:
I finished all options in trying to connect the phone to Kies.
Suggestions?
Click to expand...
Click to collapse
Hm, I just unchecked USB debuging, and mock location. Kies recognise my phone, I was thinking it will not.
Try this. Connect phone with USB and pull down notification bar. Tap on USB connection notification under that brightness bar. And check MTP - first option.
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
if u have a partition on SD ,u'll face such probs!!
try unmounting SD
Sent from my GT-S5360 using xda premium
R_a_z_v_a_n said:
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2081729
What do you want to backup exacly?
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Bad post.
Error from my network
R_a_z_v_a_n said:
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Click to expand...
Click to collapse
CWM backup maybe?
I dont know to much about that.
R_a_z_v_a_n said:
I dont know to much about that.
Click to expand...
Click to collapse
Use ThunderZap, enter recovery. You get backup there, start it - wait about 8-10 minutes to be done. :angel: Only bad thing is that you can't restore data on some other ROM.
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
R_a_z_v_a_n said:
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
Click to expand...
Click to collapse
U need flash rom via odin again. I got same error but i flash rom again, all fine
Sent from my GT-I9070 using Tapatalk 2
dungeonshard said:
I got same error but i flash rom again, all fine
Click to expand...
Click to collapse
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
R_a_z_v_a_n said:
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
Click to expand...
Click to collapse
If you do not do factory reset, then you do not loose apps and data.
That i know, but recomanded is to do a reset?
Sent from my GT-I9070 using xda premium
hey guys .. i need help .. pc doesnt recognized my phone even using kies .. this problem appear after i root my phone .. pliss help me :crying:
im using jellybean 4.1.2 ..
Kies must be one of the crappiest sw ever, but if you try to enable usb debug it should be detected.
I don't use kies. It f***s with everything when you try to connect something.
Just use the samsung driver and let windows handle the rest, but in that case don't use usb debug for filetransfer.
If you want kies for updates....don't! Kies must have bricked more phones then any other software :silly:
tys0n said:
Kies must be one of the crappiest sw ever, but if you try to enable usb debug it should be detected.
I don't use kies. It f***s with everything when you try to connect something.
Just use the samsung driver and let windows handle the rest, but in that case don't use usb debug for filetransfer.
If you want kies for updates....don't! Kies must have bricked more phones then any other software :silly:
Click to expand...
Click to collapse
Really ..orait ..let me try it first ..
Sent from my GT-I8190 using xda app-developers app
syedamerfayyadh said:
Really ..orait ..let me try it first ..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I want to install smsung usb driver but it shows this error "mobile phone has being using.you need to eject device and reboot your computer.rerun smsung usb driver for mobilephones after reboot" several time I reboot my laptop..but this error keep appear..
Sent from my GT-I8190 using xda app-developers app
syedamerfayyadh said:
I want to install smsung usb driver but it shows this error "mobile phone has being using.you need to eject device and reboot your computer.rerun smsung usb driver for mobilephones after reboot" several time I reboot my laptop..but this error keep appear..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Do you have your phone connected to computer while you install driver?
Disconnect it, install drivers, reboot.
I had the same problem.
Connect with usb debug of.then connect with usb debug on.
If that doesnt help than follow the trick of tyson
TerenceTP7 said:
I had the same problem.
Connect with usb debug of.then connect with usb debug on.
If that doesnt help than follow the trick of tyson
Click to expand...
Click to collapse
I follow what tyson say..but cnnot work ..still my pc unrecognized when I insert usb..when I use my little brother s3 mini and connect to my pc,it detect..
Sent from my GT-I8190 using xda app-developers app
tys0n said:
Do you have your phone connected to computer while you install driver?
Disconnect it, install drivers, reboot.
Click to expand...
Click to collapse
this is my problem . when i want to install usb samsung driver ,my phone not connected to my pc.. but its still have a same error ..
syedamerfayyadh said:
this is my problem . when i want to install usb samsung driver ,my phone not connected to my pc.. but its still have a same error ..
Click to expand...
Click to collapse
what android version and baseband your phone have?and which windows you are using?
on your phone go to settings>and check USB debug on..connect your phone to your pc.what does it say?
TerenceTP7 said:
what android version and baseband your phone have?and which windows you are using?
on your phone go to settings>and check USB debug on..connect your phone to your pc.what does it say?
Click to expand...
Click to collapse
My android version 4.1.2 and my baseband i8190ndxll5..im using windows 7ultimate..I check my usb debug..then connected to my pc ..it say usb unrecognized..many time I try..but still the same..
Sent from my GT-I8190 using xda app-developers app
Check your CSC
syedamerfayyadh said:
My android version 4.1.2 and my baseband i8190ndxll5..im using windows 7ultimate..I check my usb debug..then connected to my pc ..it say usb unrecognized..many time I try..but still the same..
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
I had the Same Problem my csc was missing on my I8190N I flashed DModv2 and I got it back now I can connect to Kies
trucker11 said:
I had the Same Problem my csc was missing on my I8190N I flashed DModv2 and I got it back now I can connect to Kies
Click to expand...
Click to collapse
I have same issue like this. How to get dModV2 ?
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Peruner said:
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Click to expand...
Click to collapse
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for fast reply,
I've tried that already - doesn't change anything.
Also phone is not visible in download mode.
I'd try:
- another usb cable
- another usb port (avoid hubs)
- another PC
- fresh system install
- another rom like anything stock based or cm10.1 maybe
what happens on your PC when you enter CWM and plug an usb cable
adamuadamu said:
I'd try:
- another usb cable - checked
- another usb port (avoid hubs) checked
- another PC checked
- fresh system install - tried on another PC..
- another rom like anything stock based or cm10.1 maybe - installed CM 10.2 hoping that it will fix the issue but problem still occurs
what happens on your PC when you enter CWM and plug an usb cable
Click to expand...
Click to collapse
absolutely nothing..no prompting windows with "installing driver"
Peruner said:
absolutely nothing..no prompting windows with "installing driver"
Click to expand...
Click to collapse
ok, anything happens in device manager, any new unrecognized devices shown there?
i have also had this problem from quiet some time and it happens with almost every rom for me:crying:
and temporary fix is
1) go to devices and printer(u will have ur device over there by its original name or as an storage device)
2)right click on ur device icon
3)select troubleshoot after some time it will ask u to apply fix
give permission after that it will install ur drivers once again n ur problem will be solved for a FEW DAYS
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Peruner said:
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Click to expand...
Click to collapse
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Peruner said:
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Click to expand...
Click to collapse
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
AFAIK no need to repartition, but it's enough to format /preload (in CWM go to advanced - format /preload). at least worked for me when leaving 4.3 and 4.4 roms.
y dont u try flashing any other cm10.2 based rom with cwm?
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Peruner said:
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Click to expand...
Click to collapse
Then only thing coming to my mind is some hardware problem...
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Peruner said:
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Click to expand...
Click to collapse
USB connector on your phone, 99% hardware problem...