I can connect the phone to Kies. I reinstalled Kies, I wiped cache, rebooted the PC nothing. I tried many times connect / disconnect data cable.
What else can I do?
PS:Any advice is welcome, and if the topic is not open in the appropriate area, can a moderator to move it.
Thank you very much
What's the exact error?
Sent from my GT-I9070 using xda premium
There is an actual error but does not connect after about two or three minutes of testing.
Kies returns to the main screen as if I just opened Kies program.
I'll post and some printscreens ...
LE: Checked in Developer Options, Enable USB Debugging and Mock Locations.
As I know you can't use Kies with USB debuging ON (I see you are rooted, and you are sure turn that option ON). Turn it off and retry.
I tried it, same result.
I finished all options in trying to connect the phone to Kies.
Suggestions?
R_a_z_v_a_n said:
I finished all options in trying to connect the phone to Kies.
Suggestions?
Click to expand...
Click to collapse
Hm, I just unchecked USB debuging, and mock location. Kies recognise my phone, I was thinking it will not.
Try this. Connect phone with USB and pull down notification bar. Tap on USB connection notification under that brightness bar. And check MTP - first option.
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
if u have a partition on SD ,u'll face such probs!!
try unmounting SD
Sent from my GT-S5360 using xda premium
R_a_z_v_a_n said:
I tried this version without any result. I'm tired of trying to connect Kies software.
Another question, can i backup the phone without Kies?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2081729
What do you want to backup exacly?
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Bad post.
Error from my network
R_a_z_v_a_n said:
All data, like apps, settings, SMS, everything. I back-up my contacts onDropbox, foto and videos on the PC, but thats all.
Lets see with moborobo what can i do. Thanks.
Click to expand...
Click to collapse
CWM backup maybe?
I dont know to much about that.
R_a_z_v_a_n said:
I dont know to much about that.
Click to expand...
Click to collapse
Use ThunderZap, enter recovery. You get backup there, start it - wait about 8-10 minutes to be done. :angel: Only bad thing is that you can't restore data on some other ROM.
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
R_a_z_v_a_n said:
No results.
It may posible i have uninstalled any application that may be connected with connecting to Kies? But I can access phone card and cable.
Click to expand...
Click to collapse
U need flash rom via odin again. I got same error but i flash rom again, all fine
Sent from my GT-I9070 using Tapatalk 2
dungeonshard said:
I got same error but i flash rom again, all fine
Click to expand...
Click to collapse
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
R_a_z_v_a_n said:
What we do wrong? Are u flash same firmwares? Or ..
I will flash again for the afternoon, but I think i'm lose backup of applications, right?
Click to expand...
Click to collapse
If you do not do factory reset, then you do not loose apps and data.
That i know, but recomanded is to do a reset?
Sent from my GT-I9070 using xda premium
Related
Hello guys, I had to return to Samsung Stock after i soft bricked my phone and now im back to basics and when i went to try and root it the computer wouldnt recognize my phone. Then something happened and my internet explorer went into emergency mode. Once i get it all figured out, any suggestions on how to get the computer to recognize my phone?
Dupontrocks11 said:
Hello guys, I had to return to Samsung Stock after i soft bricked my phone and now im back to basics and when i went to try and root it the computer wouldnt recognize my phone. Then something happened and my internet explorer went into emergency mode. Once i get it all figured out, any suggestions on how to get the computer to recognize my phone?
Click to expand...
Click to collapse
Try another USB port
try updating your computer with the USB drivers. and try setting your phone to USB debugging mode. and dont forget to mount ofcourse.
Yup I already tried those and nothing.
Dupontrocks11 said:
Yup I already tried those and nothing.
Click to expand...
Click to collapse
dial *2767*3855#, backup your storage first coz it'll wipe out everything.
What will that accomplish besides erasing all my data?
Sent from my SGH-I897 using XDA App
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
myankt2t said:
Hi
I updated my galaxy note last night to offical ics update for india now i can not connect my phone in usb mode it only showing charging i tried factory reset every option no result *#7284# code showing invalide mmi etc what to do so fedup
Click to expand...
Click to collapse
Download kies reinstall drivers
Sent from my GT-N7000 using xda app-developers app
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
wrong section should be in q&a
try forcing detection by going to settings, storage, mount usb. or likewise.
Kies troubleshooting is better.
Also make sure you have usb debugging off in development options
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry if its in wrong section
I tried every option you mentioned no luck
My screen some time shows fluctuation too i bought this phone yesterday i previously used galaxy s
And random reboot and random discharging
ok try to instal gb rom, official, see dr ketans thread in sticky section development, and check if it works there
edit WAIT! read comment below
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Try this
Setting -.security.-device administration - remove if any checked and try to connect.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
No luck bro.
thing i have done so far
Flashed stock rom via odin
re installed Kies
Re installed usb driver:crying:
factory reset
inurb said:
Known issue with 4.0.4 ICS http://forum.xda-developers.com/showthread.php?t=1828016
I haven't been able to resolve it by reinstalling kies. Before I could plug my note in and the phone card and external card would show up in my computer. Now only camera mode works. MTP no longer works.
I have to manually mount the usb storage to access ext sd card.
Click to expand...
Click to collapse
Manually mount how to do this ?
myankt2t said:
Manually mount how to do this ?
Click to expand...
Click to collapse
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
inurb said:
Go to settings > More > USB Utilities
If you can't do that then clean your micro usb port on your note.
Click to expand...
Click to collapse
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Please help me its been 3 days countless effort no result
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
rraaka said:
dont wipe, (factory reset) on stock ics !
dont you want to root ?
are you using windows ?
Click to expand...
Click to collapse
i didn't done hard rest it's not working :|
i m on window 7 :|
i also rooted tried custom rom still not working tried diff pcs and cables
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
LoVeRice said:
If you are using windows7 just go to control panel then device manager look for those samsung drivers esp with yellow mark, right click then properties, look for update driver-then search automatically. Hope this will help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
It showing 7CDCS device and not updating
rraaka said:
Install Kies again ( latest ver) and uninstall leaving the drivers intact, re boot pc, try
Click to expand...
Click to collapse
i have done that no luck
myankt2t said:
7cdcsis the error name tried samsung ADB mode still not working
my other android working on my system its galaxy pro :|
clean micro usb port from a brush or some thing ?
Click to expand...
Click to collapse
compressed air or a qtip dipped in rubbing alcohol.
Dear Forum,
I have a I9001. I've been busy with it for a week now and read and tried allot. Nothing seems to work!
So , my I9001 doesn't have a recovery any more. No root or CWM. The rom works (2.3.5) but crashes or freezes. Then tried every
combo in the book to get into the recovery mode but nothing works.
So I ask you biggest android forum of the world: What the hell is going on??
Tried to get into recovery by recovery boot by pc, tried installing other roms or kernels or whatever.
Also getting a mmc boot mbr read failed when trying above stuff by odin.
Also when I shutdown the phone and I start it up again then it has to be installed again like country and date etc etc...
Thanks in forward for answering.
Greetz,
Happybeat
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
M322 said:
But download mode still working? Then you could try to flash the recovery via Odin again or a stock Rom, AFAIK those contain the stock recovery as well so afterwards you'll have a "fresh" installed phone... Might work, no other ideas...
Click to expand...
Click to collapse
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Dark_Savior said:
I think that CW did an update and pushed it out to devices or something. I am having the same situation as you, I am unable to grab the device into CWR.
Click to expand...
Click to collapse
It's insane haha im still trying stuff. Now when I reboot the phone I have to says what country etc etc...but when I try to connect to wifi it says TWLauncher chrashed...I still have connection with the phone by PC. Is there maybe anything what I can change or do?
happybeat said:
AFAIK? I don't know what that is sorry...And yes the download mode works fine.
Click to expand...
Click to collapse
AFAIK - As Far As I Know
happybeat said:
Is there maybe anything what I can change or do?
Click to expand...
Click to collapse
Well if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app
ell if your phone is in such a "bad condition" I would download my stock Rom from sammobile and flash it via Odin, then it should be "factory fresh". The only thing that is annoying is that you set up your phone again...
Sent from my GT-I9001 using xda app-developers app[/QUOTE]
Ok ill check that out. I'll let you know.
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
happybeat said:
Well I tried and nothing. It says that it passed and that odin did its thing but it didn't.
Is there a program that can do a clean install? Or cant I just clean it when I hook it up to a pc? Because I have access to the internal memory of the phone by pc.
Click to expand...
Click to collapse
Well I think it should be a clean install and if I connect my phone in download mode to the pc I haven't access to the internal storage!
Did you do it like it is supposed in this tutorial? http://forum.xda-developers.com/showthread.php?t=1922505
By the way are you on a stock rom or not?
Yes, it's important to tell are you on stock or custom Rom
Mikroos said:
Yes, it's important to tell are you on stock or custom Rom
Click to expand...
Click to collapse
Sorry for my late answer!
stock I think. This is every info I have on the phone:
About phone:
Firmware: 2.3.5
baseband: i9001xxkpf
kernel: 2.6.35.7-perf [email protected] #1
build: gingerbread.xxkpg
when I do *#1234#:
pda: i9001xxkpg
phone: i9001xxkpf
csc: i9001xenkp1
That's it...
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Sorry don't know any solution but I'm quite new in here so maybe you can post it into/revive this thread because the Q&A is (in my opinion) not well visited by I9001 users because it's meant to be for i9000.
http://forum.xda-developers.com/showthread.php?t=1826216
Sent from my GT-I9001 using xda app-developers app
happybeat said:
Ok...this is strange...I just connected it to my pc and have access to it...but when I deleted something what was in download it says delete permant I say yes...when I restart it and connect it back to the pc and go to download its back??
Click to expand...
Click to collapse
Try a reset and if that is not working try a restock.
fotbal5 said:
Try a reset and if that is not working try a restock.
Click to expand...
Click to collapse
Thats the problem. There is no way of getting into recovery mode. I can get into download mode but not into recovery mode. It's like it is vanished.
And I dont know if someone from the mods could put this into the 9100 section? I thought I had to put questions here since there isn't a Q/A for 9001...
happybeat said:
Thats the problem.
Click to expand...
Click to collapse
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
M322 said:
You can do a factory reset over the dialer on a stock Rom by entering a certain code, you can look it up in the xda wiki about the I9001
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Yep did that. Doesnt work. The thing is also that I cant change anything. Everytime when I reboot I need to install again. So it doesnt remember. Same when I connect it to the pc and I remove a file from download that I do not need it doesn't remove the file because the next time I reboot its back. It's like the internal is locked?
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Marshian said:
I can't find a good page with an explanation, so I'll just type it out myself. If anything isn't clear, ask!
You can try getting into recovery mode using the Android SDK, maybe that could work...
Install the latest version of Samsung Kies if you haven't already (for the USB driver)
Install the Android SDK (http://developer.android.com/sdk/index.html) You'll need just the SDK, everything else is useless for this
Open a command prompt and go to the directory where you have installed the Android SDK (basically you'll run the command cd "<folder>", where folder is something like "C:\Program Files (x86)\Android\android-sdk")
Start your phone and go to Settings > Applications > Development
Enable USB debugging (if it's not there, just find that option and enable it )
Connect your phone using a USB cable
Go back to your command prompt and run the command tools\adb reboot recovery
Hopefully your phone will boot in recovery mode
Good luck!
Click to expand...
Click to collapse
Ok so thank you for this but unfortunatly it just didnt work. I think it is dead. Does Jtagg do any difference? Like hook it up to that machine?
So what it does at this moment:
It starts up but everytime you start up it will ask you to install everything again. So it asks what country etc.etc...
When I am in it appears to work but starting apps just makes it all crash or freeze.
Im a bit lost at the moment to do anything. It just looks that it doesnt memorize.
I can hook it up to the pc but you cant remove or add anything. You can just look and scroll through it.
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Peruner said:
Hi guys,
I've successfully flashed today rom I9070XXLQG_I9070PRTLQ1_HOME (polish play). I was planning to send my phone on guarancy repair so they can clean dusted camera but I've lost my guarancy card so all that was for nothing anyway I've noticed that after flashing this rom I can't connect my phone via USB - phone is charging but doesn't show that my device was connected.
Tried reinstalling samsung drivers and few other fixes searched on google like turning off device, pluging the cable and then turning it on but without any effect.
I've managed to root device and install CM10.2 but it didn't fix the problem (I've copied files on memory card on another phone).
Anyone faced similar problem and know how to fix it?
Thanks in advance
All the best.
Click to expand...
Click to collapse
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Turn on usb debugging in developer options. You might need to tap 7 times on rom version in About phone to get dev options.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for fast reply,
I've tried that already - doesn't change anything.
Also phone is not visible in download mode.
I'd try:
- another usb cable
- another usb port (avoid hubs)
- another PC
- fresh system install
- another rom like anything stock based or cm10.1 maybe
what happens on your PC when you enter CWM and plug an usb cable
adamuadamu said:
I'd try:
- another usb cable - checked
- another usb port (avoid hubs) checked
- another PC checked
- fresh system install - tried on another PC..
- another rom like anything stock based or cm10.1 maybe - installed CM 10.2 hoping that it will fix the issue but problem still occurs
what happens on your PC when you enter CWM and plug an usb cable
Click to expand...
Click to collapse
absolutely nothing..no prompting windows with "installing driver"
Peruner said:
absolutely nothing..no prompting windows with "installing driver"
Click to expand...
Click to collapse
ok, anything happens in device manager, any new unrecognized devices shown there?
i have also had this problem from quiet some time and it happens with almost every rom for me:crying:
and temporary fix is
1) go to devices and printer(u will have ur device over there by its original name or as an storage device)
2)right click on ur device icon
3)select troubleshoot after some time it will ask u to apply fix
give permission after that it will install ur drivers once again n ur problem will be solved for a FEW DAYS
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Peruner said:
Hi again,
Thanks guys for your reply.
@kunal19911 - sorry not working, my device is not visible at all anywhere
@adamuadamu as above - no unknown devices in device manager.
Click to expand...
Click to collapse
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Have you tried to reboot phone. My phone gets like that when I charge it with wall charger, and can't be recognised by pc untill reboot. I forgot to tell you that.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Peruner said:
Yep, I've tried - many times - as written before tried to plug in in download mode - also no effect.
I've never had this problem before, is there any way I could flash new rom without estabilishing USB connection?
Click to expand...
Click to collapse
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Huh, from CM10.2 you need to do it with Odin. Or to repartition preload partition. But I do not know how to do it.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
AFAIK no need to repartition, but it's enough to format /preload (in CWM go to advanced - format /preload). at least worked for me when leaving 4.3 and 4.4 roms.
y dont u try flashing any other cm10.2 based rom with cwm?
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Peruner said:
The thing is that I don't have this issue because of CM 10.2.
It was cause since I've flashed stock ROM listed in the topic.
Flashing CM10.2 was a desparate try to fix it, after rooting stock rom, flashing cocore kernel didn't help.
Click to expand...
Click to collapse
Then only thing coming to my mind is some hardware problem...
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Peruner said:
Ok guys thanks for all answers.
Yesterday my phone got discharged and doesn't want to charge anymore.
I'll bring it to mobile repairs.
Cheers
Click to expand...
Click to collapse
USB connector on your phone, 99% hardware problem...