[Q] SlimICS 3.6 - no OTA - Galaxy S I9000 Q&A, Help & Troubleshooting

(firstly, apologies this is not on the developers ICS thread but i don't have enough posts to post in that section at this point).
Just a quick question...updated to SlimICS release 3.6 last week and just noticed that only the ROM update is available via the OTA option...has anyone else had this problem ?
If nobody else has had this then do I need to reflash the ROM to resolve this issue ?
Many thanks in advance !

myselector said:
(firstly, apologies this is not on the developers ICS thread but i don't have enough posts to post in that section at this point).
Just a quick question...updated to SlimICS release 3.6 last week and just noticed that only the ROM update is available via the OTA option...has anyone else had this problem ?
If nobody else has had this then do I need to reflash the ROM to resolve this issue ?
Many thanks in advance !
Click to expand...
Click to collapse
It's a feature not a problem. When a new version comes out, "update me" app will alert you. You proceed through the app to download the base and essentials. Once both are on the sd, reboot to cwm and flash from there.
You do not need to reflash.
Sent from my I9000 running Slim ICS 3.6.

Thanks for your reply although I don't think my initial post was very clear.
Since updating to 3.6 the add-ons OTA is not available...the only option available is to check to see if a new ROM is available.
On 3.5 I had the option to install add-ons OTA.
This is why I am wondering if I need to re-apply 3 6.
Thanks again.

myselector said:
Thanks for your reply although I don't think my initial post was very clear.
Since updating to 3.6 the add-ons OTA is not available...the only option available is to check to see if a new ROM is available.
On 3.5 I had the option to install add-ons OTA.
This is why I am wondering if I need to re-apply 3 6.
Thanks again.
Click to expand...
Click to collapse
Try the back button, mine default opens to the ROM section. Otherwise try reinstalling the update me app, clearing data may help also. Make sure the app is updated.
If that all fails, reflash the ROM, you would probably need a wipe.
Sent from my I9000 running Slim ICS 3.6.

Good call on the Update Me google play update...it wasn't showing in my downloaded apps, yet when I selected it, it was offering an an update.
Updated to 1.2.0 and everything was then as expected. Thanks very much for your help.
Interestingly, I can see 3.7 has just been made available...so another update required. It's now suggested that a "full wipe" is undertaken - just wondering what exactly this covers ? Normally do a cache and Delvik cache wipe, so not sure what additional things should be done this time round. I'd ask this in the dev thread but cannot post there as of yet.

Related

HOW TO ROOT coming from ICS STOCK FIRMWARE?

Hi all,
I have European Version of the Galaxy Tab 8.9 P7310 Wifi only.
I at least waited for the official Stock ICS Update to finally go and root my phone now. My first impression is that I made my life a little bit harder now.
As is can see so far in the forum there is only the possibility to flash CWM recovery from odin and after that go root as described in suwandiapr thread here:
**NEWEST P7310 ICS FOR USA RETAIL**[STOCK ROM]GT-P7300/P7310 odin image at One Place
Now I have a few questions. Can I use this method described in the thread for my European Galaxy Tab as well?
Can I use a CWM 6.0.0.8 file to flash with odin? Or only the versions shown in the thread?
Should be possible to unpack the "recovery.img" from a flash file prepared to be flashed from recovery, right? For example the one in the TOOLKIT thread from nirogu325 that is inside the Toolkit package
[GUIDE & TOOLKIT][8.04.12] One-stop Guide for 7300/7310
Finally, is there a possibility to flash root file from stock ics recovery. Becaus only possibility if have in stock recovery is to choose option "apply update from external storage" and when I choose this option the phone will show me "E:unknown volume for path [/sdcard]" and I have no access to my data in /sdcard folder.
Thanks for your replys.
Feels like people aren't searching....
I answered similar question yesterday...
I would recommend to use the stock ICS file for Odin flash. If you want, you can follow that up with an Odin-flashable recovery & a root.zip flashed from recovery.
see e.g.
Odin-flashable recovery (I still prefer the slightly older 5.1.2.6 - for a more complete and logical menu than 5.5.0.4; and more reliable than 6.x)
http://forum.xda-developers.com/showpost.php?p=30839339&postcount=52
for root package:
http://forum.xda-developers.com/showpost.php?p=30837767&postcount=47
Edit, to answer your other questions.
- There is no Odin package for cwm 6.0.0.8, so you can't use that directly over stock ICS.
- you can not use stock ICS recovery to flash anything at all, no root.zip, no nothing. Reason is that it does not mount sdcard correctly
- all of this will work on p7300/7310 of any region
Sorry fred_be9300, I searched a lot before opended this thread. Maybe not good enough, but I just want to get sure that I do everything correct before bricking my device.
So, thanks for your answers, this helped me to be completly sure what I have to do.
I sucessfully flashed the CWM with ODIN and after that installed the root.zip from CWM Recovery.
It was easier than I thought before, verything worked fine for me. Now I´m happy with my rooted Stock ICS for the moment and hoping for some more cool custom roms!
Thanks a lot!
fred_be9300 said:
for root package:
http://forum.xda-developers.com/showpost.php?p=30837767&postcount=47
Click to expand...
Click to collapse
I have flashed this in CWM, but I still can't get root. Any ideas?
EDIT: I found this: http://www.mediafire.com/?214m9bv3oyjwl8h
dingurt said:
I have flashed this in CWM, but I still can't get root. Any ideas?
EDIT: I found this: http://www.mediafire.com/?214m9bv3oyjwl8h
Click to expand...
Click to collapse
How about package from my thread? http://forum.xda-developers.com/showthread.php?t=1582943
It works for me..
That a busybox and su binary fix.. You can use that package for implementing v6 supercharger from zeppelinrox..
Got it done.. Shameful how easy it was to do after the kies update.
Sent from my GT-P7310 using Tapatalk 2
thank you very much !
fred_be9300 said:
Feels like people aren't searching....
I answered similar question yesterday...
I would recommend to use the stock ICS file for Odin flash. If you want, you can follow that up with an Odin-flashable recovery & a root.zip flashed from recovery.
see e.g.
Odin-flashable recovery (I still prefer the slightly older 5.1.2.6 - for a more complete and logical menu than 5.5.0.4; and more reliable than 6.x)
http://forum.xda-developers.com/showpost.php?p=30839339&postcount=52
for root package:
http://forum.xda-developers.com/showpost.php?p=30837767&postcount=47
Click to expand...
Click to collapse
Edit, to answer your other questions.
- There is no Odin package for cwm 6.0.0.8, so you can't use that directly over stock ICS.
- you can not use stock ICS recovery to flash anything at all, no root.zip, no nothing. Reason is that it does not mount sdcard correctly
- all of this will work on p7300/7310 of any region[/QUOTE]
Thx!
thank you very much for this information
Please help me befor i throw that tab out of my window....
i updated to ics via odin. everthing works fine but i´m not able to root it.
since yesterday i´m reading posts here. i installed CWM 5.1.2.6 and tried the files root_original, kk_root_ics, root_Gtab-8.9 and CF-Auto-Root-espressorf-espressorfxx-gtp3100 but none of them bring root access. Root checker still says no....
could you please tell me what the problem is? for me the tab is worthless without root....
TommyOcean said:
Please help me befor i throw that tab out of my window....
i updated to ics via odin. everthing works fine but i´m not able to root it.
since yesterday i´m reading posts here. i installed CWM 5.1.2.6 and tried the files root_original, kk_root_ics, root_Gtab-8.9 and CF-Auto-Root-espressorf-espressorfxx-gtp3100 but none of them bring root access. Root checker still says no....
could you please tell me what the problem is? for me the tab is worthless without root....
Click to expand...
Click to collapse
Have you tried a custom rom yet? Most of them have built in root.
Sent from my GT-P7310 using xda app-developers app
TommyOcean said:
i updated to ics via odin. everthing works fine but i´m not able to root it.
since yesterday i´m reading posts here. i installed CWM 5.1.2.6 and tried the files root_original, kk_root_ics, root_Gtab-8.9 and CF-Auto-Root-espressorf-espressorfxx-gtp3100 but none of them bring root access. Root checker still says no....
could you please tell me what the problem is?
Click to expand...
Click to collapse
Probably whatever was the first root package you tried, has messed things up. It may be preventing the other packages from installing properly.
It might work to run an unroot package to clean up; not tested that myself.
I vouch for the success of installing ICS + CWM5.1.2.6 + kk_root_ics. Try it clean, if nothing else works.
Sent from my GT-P7300 using xda app-developers app
Thanks @ upconvert & fred_be9300
after a wipe i used v2 from here and it works very well!
Right back atcha
Thanks for my first "thanks!" I've been desperately trying to help people so I can shake my xda noob status and participate in the dev forums. I've been into android modding for a few years, but on a different forum that was more active for my phone. It's nice when someone says thanks!
upconvert said:
Thanks for my first "thanks!" I've been desperately trying to help people so I can shake my xda noob status and participate in the dev forums. I've been into android modding for a few years, but on a different forum that was more active for my phone. It's nice when someone says thanks!
Click to expand...
Click to collapse
Well thanks for your "thanks" too! I really appreciate your fast help! Hope you can enter the dev forums soon! :fingers-crossed:
TommyOcean said:
after a wipe i used v2 from here and it works very well!
Click to expand...
Click to collapse
Wow you really picked up an oldie!
I would recommend you move on to a newer ics *for p7300* though. The one you are on now, was ported in August, from the initial p7500 (tab 10.1) ics release. When used on p7300, it tends to give battery miscalibration issues after one or several charge cycles. The thread you linked is full of the complaints.
Sent from my HTC Desire using xda app-developers app
fred_be9300 said:
Wow you really picked up an oldie!
I would recommend you move on to a newer ics *for p7300* though. The one you are on now, was ported in August, from the initial p7500 (tab 10.1) ics release. When used on p7300, it tends to give battery miscalibration issues after one or several charge cycles. The thread you linked is full of the complaints.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
At the moment i´m just glad it works but thanks for the info! Have you got a link?
There's about half a dozen roms to choose from. I can't post links, cuz I'm a noob to xda, but the 8.9 android development forum has all the threads. Look for the most recent version of each and browse the threads to see what people thought of them.
upconvert said:
There's about half a dozen roms to choose from. I can't post links, cuz I'm a noob to xda, but the 8.9 android development forum has all the threads. Look for the most recent version of each and browse the threads to see what people thought of them.
Click to expand...
Click to collapse
Baaaam, here is one more "thanks" for you"! :good:

Xperia X8 wi-fi not working(JB Mini Project)

Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
so noone knows nothing in here?thats sweet
SrSGr said:
so noone knows nothing in here?thats sweet
Click to expand...
Click to collapse
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
use back stock ROM (just kidding
CKKnot said:
Patience my friend x)
What wifi problem do you have? Unable to detect Adhoc connection?
Have You tried this Kernel + Rom ? (All JB rom is unable to scan adhoc wifi. Except if you make changes to the source and compile it yourself)
If you want to surf the internet but with not using wifi and using a cable, This is a Post for you.
Click to expand...
Click to collapse
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With a few words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
SrSGr said:
Ok the problem is that i try to turn it on but it wont,the toggle bar just moves to be enabled,but it never gets enabled!It just goes back to off possition..With little words,i cant enable Wi-Fi..So..as i said my friend,i am newbie here,so please try to explain me what i should do with those rom and kernel you send..should i go back to stock rom,reflash this kernel and install this rom?Is this the JB mini project too or something similar and stable without bugs?
Thanks in advance!
Click to expand...
Click to collapse
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
CKKnot said:
Maybe the rom + kernel combination is wrong or the rom is just being buggy.
I just personally liked nAa's work because he release a stable version of every product.
If you want to change into the recommended rom that I just told you;
1. Flash the latest kernel (06)
2. Follow instruction on the kernel post. (/system wipe at recovery before flashing a rom & etc)
3. Flash the rom. Followed by the GAPPS
4. As it said, this is my recommendation steps. I do not guarantee your satisfactory
Click to expand...
Click to collapse
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
SrSGr said:
Thank you,I am gonna test it and I will keep you informed here soon!
EDIT:It works great!ignore my PM.I flashed kernel 5 not 6 and it works like a charm.Thanks a lot for helping me out!
Click to expand...
Click to collapse
Replied. It because I forgot to mention that 06 has a little bit changes that will make normal jb rom that is not released pior to the kernel release data will not boot
SrSGr said:
Hello guys,
I am brand new here,as after 3 years of owning a X8 i decided to jump to other ROM,because i was bored of the simple design of his menu and i was so frustrated to stay back with android market when my friends had messenger for facebook e.g.,i had to refresh again and again my opera..and much more apps and games i would like to play.So,i decided to start searching for new ROMs,and i found MIUI,but i wasnt able to find a stable version to dl for my phone.Then i found JB Mini Project,I succeeded on installing it on X8 but there is one thing that wont work in every version of JB i have tried!THE WI-FI!It is really frustrating for me!I am so begginner to those things,but i understand that its not only me that will have this problem and that developers might be working on it right now(I am 3D designer and i know about beta versions of things,even I have to release again and again my creation because of a bug),but i really hope someone had this problem too and found a fix on it..I tried a fix i found in forums with Titanium Backup,but nothing...
Anyone knows anything..just help me out with this.:crying:
Thanks in advance guys!:cyclops:
Click to expand...
Click to collapse
hey i had same problem with jbmp when i used jbmp kernel but when i flashed with nAa jb 05 kernel it worked fine..

N8010XXUDNE4 | 4.4.2 | Stockish ROM | Sept 14, 2014

Rom is very basic. Built from the UK N8010XXUDNE4 firmware. Runs great on my daughter's N8013. Only thing needed is to flash @Mikyno WIFI fix after your initial boot. See his thread for link and thank him.
ROM is rooted with unsecure stock kernel.
it is ODEX!! (didn't care to deodex since this is just a base.)
Nothing removed except KNOX.
Feel free to use a base for a ROM, I don't even care for credit. I just made this for my old faithful followers who are still rocking the N8013/N8010.
Enjoy!
Download - LINK
I have tried to flash this on my n8013 a few times fresh, using TWRP 2.7.1, but each time I try, I get an error once it boots saying that settings has closed Any ideas how to fix this?
EDIT:
I found the issue. When you flash the ROM, you must do it in installments. First, flash just the ROM, then reboot into system, let it boot up and load the default startup options. Then reboot back into Recovery, and flash the n8013_WiFi_Fix, and if you want to, Boeffla Kernel as well. Then once you reboot back into System, it is all good.
I did the two part flashing as well, works great so far! Thanks!
Yeah sorry guys... Spaced out on telling you guys that. Its been a while since I posted anything so I forgot to include the important details. My bad. Glad it is working for you guys. I may or may not start working on a kernel as well and I might add some tweaks to this when I have time between work and updating my apps on the play store.
Thanks!
Will try it soon!
You think otg is working on the 8010?
Is it stock kernel for 8010?
Sent from my SM-G900F using XDA Premium 4 mobile app
An 8013 update? Lol holy hell. I'm happy I finally decided to check up after all these months. Will give it a shot tonight, thank you!
Thans man 4 the rom
Whats the difference between this/your N8010XXUDNE4 rom and the one used in this linked process? Aside from all the install steps.
http://forum.xda-developers.com/showthread.php?t=2770009
Thanks!
Jamison904 said:
Rom is very basic. Built from the UK N8010XXUDNE4 firmware. Runs great on my daughter's N8013. Only thing needed is to flash @Mikyno WIFI fix after your initial boot. See his thread for link and thank him.
ROM is rooted with unsecure stock kernel.
it is ODEX!! (didn't care to deodex since this is just a base.)
Nothing removed except KNOX.
Feel free to use a base for a ROM, I don't even care for credit. I just made this for my old faithful followers who are still rocking the N8013/N8010.
Enjoy!
Download - LINK
Click to expand...
Click to collapse
Great ROM, exactly what I was looking for for my n8013. Is there a trick to attaining root access with this ROM? Titanium Backup keeps requesting, but it is never granted.
Sorry if this is a noob question. That is the only thing I need. Thanks!
Update: I got this to work by re-flashing auto root utility.
FYI if anyone is having problems with predictive text, you need to go into input languages and download the language (even though you've selected it in the install).
Also I didn't need to install the mikyno wifi fix to get it working, presumably the wifi isn't meant to actually physically work without the fix?
Thanks guys
It was a software issue not hardware. It has been too long for me to really say more then that, but either way good to know. Thank you sir
I get random reboots quite often with all stock based roms.
CM seems to work fine though.
Anyone else has reboot issues?
Edit.
I'm using Phil's touch recovery. Could that be the problem?

[Q&A] [ROM][KitKat] CM11.0 for the LG 2x

Q&A for [ROM][KitKat] CM11.0 for the LG 2x
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KitKat] CM11.0 for the LG 2x. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Quick help for a newbe: where to find New Bootloader
Hi there,
I am a newbe that wants to load a custom rom on my LG P990.
I've read a lot about it already and on this forum etc.
I hope you are willing to provide me a few sentences explanation:
* I want to load CM11, I need the New Bootloader for that. Where can I find the New Bootloader?
* I also found out that there is an All In One Toolkit. Does this toolkit include the New Bootloader? Can I use this All In One Toolkit for flashing CM11 to LG P990?
* It does not become clear to me if I only need to download the ROM or also the kernel? Or does the ROM already include the correct kernel? (e.g. following this latest build/update on this XDA forum: post by gucky01 on 25 Oct. 08:41)
* Finally you can maybe provide me a few words on the difference between 3.1 and M1? Why have two sources of ROMs been developed, why not just continue with 1?
Thanks a lot!
In aio u can change bootloaders
Flash with recovery the twrp 2.7.10.zip search it in development. After boot to your twrp recovery make wipe
And install the rom
The kernel is inside the cm11 rom
OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.
See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads
foober said:
See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads
Click to expand...
Click to collapse
Here you are
DaveCool said:
OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.
Click to expand...
Click to collapse
See?
Bad Battery - Battery life (Advice)
If some of you have noticed sudden "reboot" let's say, I have got an advice for you!
Some months ago, my phone suddenly turned off even if the battery level was up to 80 percent. I was pretty shocked and I did not know what that means. Then my phone tried to reboot but it stucked in bootloop and I could not turn on the phone. Is it caused by rom? I thought. So I removed the battery and inserted back again. I plugged in the charger and then I was able to boot my phone again. It happened very often and I was crying a lot.
It was very annoying so I decided to buy a new battery. I replaced the old one by the new one and now everything works perfectly.
And of course it will take some time to get the new battery working well (I recommend full charging cycles (from 20 percent to 100 percent)).
Do not discharge your battery to 0 percent. It does not like any of the Li-ion batteries.
touch my phone does not work
please help me !
can you teach me how to build tonyp's source code ,thks!
it sees some code not in tonyp's framework/base ,like getSimNameBySubScription.
sorry,i'm not good at english.
Battery Charge Issue
First of all thank you tonyp and all others who worked to get Kit-Kat for our old phones and make it new again
However I have below questions - would be really grateful if someone would help me with them. I am on M1 Jul 21:41:16 CEST2014-20140716
1) I am unable to upgrade my M1 with CWM and TWRP with all versions and all possible wipe methods, was trying to update (gucky01) weekly updates but always ended up in an error, tried dirty, clean dalvik, clean partation..aah everything, but no go
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Let me know if there are any workarounds for above posted questions.
Thank you again to all developers, god bless you all
link for the updates
can someone please give me the link to download the new updates
Hey guys, i'd like to ask:
Running 13. October build w/optimizations and latest 3.1 KK.
When I manage to get oom (4 tabs in browser or so), phone becomes unresponsive (as expected), but then the notification bar gets really laggy. Interesting is that when it's extracted to fullscreen, the animations are really slow (5 fps or so) , but when the less i see from navbar, the faster it is. (When i swipe down the bar for just a little bit, it doesn't even lag). Do you know what can cause this problem? I thought it might be rendering problems after systemui.apk got forceclosed while oom.
Sent from my LG-P990 using XDA Premium 4 mobile app
F2FS Support
Can you make a version with F2FS like DJNoXD did?
Unknown issue with Google Play services
Update: I found a solution. Please see post #20 below.
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
I have installed some of the latest Google apps such as Maps, Play Music, and Hangouts.
Google Play services is currently version 6.5.99 on my phone. I've tried clearing the cache and can't see how to reinstall it.
Any help would be greatly appreciated, thanks.
Everything is great except for the camera. I have a problem when recording video . picture freezes . I do not have that problem with ICS . I use the kernel M1 .
Anyone have problem with mobile data?I use last tonyp rom and its fantastic,but same problem i have like on previous roms,mobile data crashed all the time...
Video recording and mobile data work fine here.
Sent from my LG-E435 using XDA Free mobile app
radio FM
there is any way to see the radio fm work on cm11 like the stock rom?
djpagz said:
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Click to expand...
Click to collapse
As lubosmj says above in post #7, try getting a new battery. I got one off ebay for a cheap price and it really helped!
[solved] Unknown issue with Google Play services
jonomcleish said:
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
Click to expand...
Click to collapse
Hey all, I solved this by updating Google Play services to version 6.6.03. You can find and download it on MihirGosai's [APPs] [SHARE] Google Play Services 6.7.74 and Google Play Games 2.2.09 thread.
Not sure if it made a difference but I also switched from CWM to TWRP 2.8.1.0 found on DJNoXD's [RECOVERY] [newbl] TWRP 2.8.1.0 touch recovery [2014-11-30] thread.
Things seem a lot more stable after these two changes.
Thanks for the awesome ROMs tonyp!!

[Q&A] [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS

Q&A for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lost Root
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
gtchapin said:
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
Click to expand...
Click to collapse
Go to this page http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Thanhtho96 said:
Go to this page download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Click to expand...
Click to collapse
Thanks a lot, it solve the issue.
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
yddar17 said:
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
Click to expand...
Click to collapse
No. I don't think so. Your captivate won't bootup with this ROM + Neat kernel
i9000 kernel
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Install APK
I can't install APK file
It's say "Can't open file"
albogino said:
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Click to expand...
Click to collapse
That would be cause you flashed the I9000 version of Slimbean. You can change it in your build.prop but wouldn't suggest it if you're new at it.
Go into your phone settings and check what variant/version is says you have. If it says I9000, you'll have to flash the I9000 version. That being said, if you're 100% your phone is an I897, flash back to stock, grab the I897 Slimbean and then flash Semaphore.
hts2007 said:
I can't install APK file
It's say "Can't open file"
Click to expand...
Click to collapse
What apk? You'll need to provide some more details.
Question on OmniRom Lollipop by HumberOS - Could not be downloaded, error 491
Hi friends,
danielad200 wrote on 23rd March 2015, 09:54 PM
cannot install any app and geting error 491 in the market for install any app
No responses to that in the original thread. I have gotten this bug too. Searches tell me to remove my google account, clear the caches of Google Play, reboot, put in my google account and all will be well. Worked for everyone else on the google searches except me and maybe danielad200.
Any help or suggestions out there?
APN
5.0.2 With Gapps has been my daily driver for a few weeks now, its really smooth. Only thing that seems laggy to me is making calls, and the time lapse between receiving a call and the screen waking up.
5.1 Is worked even more smooth, only issue that I've had is for some reason, I'm not able to access Data with my APN. All my settings are correct. WIll try flashing again, to see if that might help. Is there anything that you recommend? Data worked fine with 5.0.2.
can't set lockscreen wallpaper
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
lconan90 said:
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
Click to expand...
Click to collapse
Navigate to setting/performance/advance tick force high-end graphics
Changelogs
pliz is there any changes in the card functionality of this new mod...? cause the former is quite disturbing.. it always shows no files in my card.. even after a reboot..
icon
the message app seems to be the old one like in 4.4~
---------- Post added at 09:53 AM ---------- Previous post was at 09:45 AM ----------
Thanhtho96 said:
Navigate to setting/performance/advance tick force high-end graphics
Click to expand...
Click to collapse
Thanks a lot
Random Reboot
I am still experiencing random reboots. Normally it happens if i am on the call for 8-10 min.
Works smooth
Works smoothly on my captivate no problem in connection to buttons functioning. although it has many bug issues timely some developers would fix them. Many Thanx to Humber OS creator cause of for captivate the exclusive LP OS made available.
It works!
I've been using this series of ROMs practically since they were released. I wanted to say a huge thank you to HumberOS and Monfro for the work they have done.
I personally have found, after testing each release, that Monfro's April 5.1 port is the most stable, smooth, and quick of all of them. I can't really vouch for anything related to taking calls though, as I don't have a SIM in it.
-venividivici24
Thanks a lots .. I have DHG-i897
Humbert , very good job , thanks a lots for your ROM works great , antutu benchmark got 7450 point , only that it is missing is the TV OUT ... that has this cell originally until kk 4.4.4
SGH-I897 ..
thanks against , and let me know if you add that function .. Gus
i897 best option
I have a Samsung Captivate i897 and just put 4.4.4 KitKat on it. Running a bit slow. How does OS version 5 work on the captivate? If people had to recommend a particular OS that was the most current you could get without any real loss in performance what would it be? Found 2.3.5 was fine the few minutes I was on it. But that's pretty old. Was originally going to go for 4.2.2 but found an article on 4.4.4 so went straight to it. Curious other's opinions.
Thanks.
jR

Categories

Resources