I have read a couple of threads regarding 'boot-loop' but I was never successful in finding a similar problem like mine.
Whenever I update my X8 from 1.6 to 2.1, my device goes to boot-loop. It loads till I get to the main screen, then freezes, then reboots again. It goes on until the battery dies.
I used flashtool, PCC, SEUS, but to no avail, the same issue persists. Does anyone know any other way to update my phone, or fix this issue? Am I stuck to the stock ROM 1.6?
Well i suggest you to download PC Companion to update your device.Its the safest way to do it and its easy.Follow the on screen instructions.Download it from here:
http://www.sonymobile.com/gb/tools/pc-companion/
dimitrisioa said:
Well i suggest you to download PC Companion to update your device.Its the safest way to do it and its easy.Follow the on screen instructions.Download it from here:
http://www.sonymobile.com/gb/tools/pc-companion/
Click to expand...
Click to collapse
If you actually read his post you would see he's already tried that.
Sent from my E15i using xda premium
When I update using PC Companion (PCC) or Update Service (SEUS/US), the update successfully applies but when I turn on the phone, it loads a bit to the main screen, freezes, then goes to a boot-loop.
The same goes when I flash the stock ROM using flashtool, the same problem persists.
jephimax said:
When I update using PC Companion (PCC) or Update Service (SEUS/US), the update successfully applies but when I turn on the phone, it loads a bit to the main screen, freezes, then goes to a boot-loop.
The same goes when I flash the stock ROM using flashtool, the same problem persists.
Click to expand...
Click to collapse
Did You Try to "Repair Phone" instead of "Update Phone" when you used PCC ?
Mayank77 said:
Did You Try to "Repair Phone" instead of "Update Phone" when you used PCC ?
Click to expand...
Click to collapse
I already did sir, same results.
jephimax said:
I already did sir, same results.
Click to expand...
Click to collapse
and in that case i will insist you go to nearest sonyericson care /custumer service and tell them to update ur device to 2.1
and after 2.1 most of the things to flash is smooth as butter
good luck
jephimax said:
I have read a couple of threads regarding 'boot-loop' but I was never successful in finding a similar problem like mine.
Whenever I update my X8 from 1.6 to 2.1, my device goes to boot-loop. It loads till I get to the main screen, then freezes, then reboots again. It goes on until the battery dies.
I used flashtool, PCC, SEUS, but to no avail, the same issue persists. Does anyone know any other way to update my phone, or fix this issue? Am I stuck to the stock ROM 1.6?
Click to expand...
Click to collapse
Hey buddy visit this link, it may solve all your problems
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
ankitxperia said:
and in that case i will insist you go to nearest sonyericson care /custumer service and tell them to update ur device to 2.1
and after 2.1 most of the things to flash is smooth as butter
good luck
Click to expand...
Click to collapse
Okay sir, I'll go to the Sony Service Center here. Do they upgrade the device for free or rather there's a service fee? Since my warranty has now expired.
Anyone can help me? No time to go to a Service Center.
Download android 1.6 firmware and flash it trugh flashtool
Maybe its help you
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Download android 1.6 firmware and flash it trugh flashtool
Maybe its help you
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
Here it is
http://www.mediafire.com/?v4kv3mj3tu5k525
-=PrimeHD=-8-=Alfs Kernel=-
fotak-x said:
Here it is
http://www.mediafire.com/?v4kv3mj3tu5k525
-=PrimeHD=-8-=Alfs Kernel=-
Click to expand...
Click to collapse
He doesn't want to flash 1.6, you should try reading the thread.
Sent from my E15i using xda premium
NIMBAH said:
He doesn't want to flash 1.6, you should try reading the thread.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Maybe he can fix some thing but hey if he dont want to...his choice
Sorry for not reading
-=PrimeHD=-8-=Alfs Kernel=-
I reverted back to 1.6 since the phone boot-loops when I update.
Need help guys...
jephimax said:
Need help guys...
Click to expand...
Click to collapse
From your original post , I could gather that you tried fixing with PCC/SEUS/Flashtool. But did you try to update with both PCC and SEUS ?
Did you follow the instructions carefully when updating , like when and how long to hold the back button of your X8 while updating. When to connect you X8 to the computer etc
Mayank77 said:
From your original post , I could gather that you tried fixing with PCC/SEUS/Flashtool. But did you try to update with both PCC and SEUS ?
Did you follow the instructions carefully when updating , like when and how long to hold the back button of your X8 while updating. When to connect you X8 to the computer etc
Click to expand...
Click to collapse
Repairing and updating with PCC/SUES is basically the same thing. It just skips the part where the phone has to be on and mounted.
And if he didn't didn't hold the button long enough or something the process wouldn't even start.
I think the X8 is just dodgy and the best bet would be to take it to a service center.
Sent from my E15i using xda premium
Maybe Wotan would work but that costs money AFAIK.
This is actually quite a peculiar situation. I'm not sure if anybody has ever come across this before.
Its strange because FlashTool works literally 100% of the time.
Your best bet ATM would be to visit a service center or Contact Sony Online.
Best of luck
- Shane
Yes sir, this is one peculiar X8. I don't know if it's a software problem.
Anyways, thanks a bunch to all those who helped! Much appreciated.
Related
i really need a e15 stock rom, i bricked my phone and i cant use SEUS bcoz i get stuck in "Release the back key". Almost all the link that i've seen was dead, HELP ME PLEASE...
zcedar said:
i really need a e15 stock rom, i bricked my phone and i cant use SEUS bcoz i get stuck in "Release the back key". Almost all the link that i've seen was dead, HELP ME PLEASE...
Click to expand...
Click to collapse
Use PCC. You'll get back to Stock
Look into the Sony Ericsson folder in my MediaFire collection.
B.Jay said:
Look into the Sony Ericsson folder in my MediaFire collection.
Click to expand...
Click to collapse
Can i use X8_E15_2.1.1.C.0.0_generic.7z to flash my E15a? What's the difference between 2.1.1.c.0.0 and 2.1.1.a.0.6? Which is better if im gonna root my phone? Tnx
Relax, it happened to me before. Try taking out your battery, then open PCC click on software support. Click update and when they say no phone recognised click repair phone. Once its done preparing and askes you to hold back button while inserting usb cable, you put in the battery and immediately hold back button and insert usb cable. keep holding back button until something happens. Done
XperienceX8 said:
Relax, it happened to me before. Try taking out your battery, then open PCC click on software support. Click update and when they say no phone recognised click repair phone. Once its done preparing and askes you to hold back button while inserting usb cable, you put in the battery and immediately hold back button and insert usb cable. keep holding back button until something happens. Done
Click to expand...
Click to collapse
I Flashed my phone using this stock rom "X8_E15_2.1.1.C.0.0_generic" and baseband "X8_E15a_2.1.1.A.0.6_Baseband_015". The result is my model number becomes e15i and it's suppose to be e15a
I've tried using PCC, sir, but it always gives me this message "There is no software available for your phone yet. Please try again"
zcedar said:
Can i use X8_E15_2.1.1.C.0.0_generic.7z to flash my E15a? What's the difference between 2.1.1.c.0.0 and 2.1.1.a.0.6? Which is better if im gonna root my phone? Tnx
Click to expand...
Click to collapse
Yes, BUT ...
If you have an UNLOCKED boot loader be sure to DESELECT everything but system.sin, data.sin, cache.sin
zcedar said:
I Flashed my phone using this stock rom "X8_E15_2.1.1.C.0.0_generic" and baseband "X8_E15a_2.1.1.A.0.6_Baseband_015". The result is my model number becomes e15i and it's suppose to be e15a
Click to expand...
Click to collapse
To flash the baseband you would need to have an unlocked boot loader.
The ROM ID is rather meaningless when you actually run on a E15a baseband. If you want to correct that "cosmetical" problem edit the build.prop and change all E15i to E15a
zcedar said:
I've tried using PCC, sir, but it always gives me this message "There is no software available for your phone yet. Please try again"
Click to expand...
Click to collapse
Guys, PCC/SEUS is plain crap. The ONLY thing it is good for is to have the drivers installed, but that's all.
zcedar said:
I Flashed my phone using this stock rom "X8_E15_2.1.1.C.0.0_generic" and baseband "X8_E15a_2.1.1.A.0.6_Baseband_015". The result is my model number becomes e15i and it's suppose to be e15a
Click to expand...
Click to collapse
So, your phone works now? If yes, the wrong model that it shows isn't a problem, don't worry about that
RoberGalarga said:
So, your phone works now? If yes, the wrong model that it shows isn't a problem, don't worry about that
Click to expand...
Click to collapse
Or download the e15i baseband & flash it. That should end your woes.
---------- Post added at 03:22 AM ---------- Previous post was at 03:17 AM ----------
B.Jay said:
Yes, BUT ...
The ROM ID is rather meaningless when you actually run on a E15a baseband. If you want to correct that "cosmetical" problem edit the build.prop and change all E15i to E15a
Click to expand...
Click to collapse
I read somewhere that e15a & e15i actually have different operating radio frequencies. Ergo, you could end up with a smartphone which truly works - but without the "phone" capability
B.Jay said:
Yes, BUT ...
If you have an UNLOCKED boot loader be sure to DESELECT everything but system.sin, data.sin, cache.sin
To flash the baseband you would need to have an unlocked boot loader.
The ROM ID is rather meaningless when you actually run on a E15a baseband. If you want to correct that "cosmetical" problem edit the build.prop and change all E15i to E15a
Guys, PCC/SEUS is plain crap. The ONLY thing it is good for is to have the drivers installed, but that's all.
Click to expand...
Click to collapse
Thank you, Sir B.Jay for explaining it... All is well now
changing models?
SO guys, i have a e15i that cannot work 3g on my country, it's possible to change between the models? How can i put e15a on my device?
MarioFan1998 said:
Relax, it happened to me before. Try taking out your battery, then open PCC click on software support. Click update and when they say no phone recognised click repair phone. Once its done preparing and askes you to hold back button while inserting usb cable, you put in the battery and immediately hold back button and insert usb cable. keep holding back button until something happens. Done
Click to expand...
Click to collapse
Thought you had provided the solution for me but...... at the end I got ''no software update for my phone'' :crying:
miniman1 said:
Thought you had provided the solution for me but...... at the end I got ''no software update for my phone'' :crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35338935
"why do we fall, bruce?
so that we can pick ourselves up."
EDIT: SOLVED THANKS TO damir87
Ok guys, after a lot of research and messing up I ended up needing to ask for help.
I started trying to install cyanogen mod 9 (Android 4.0.3) where everything was going fine, but when I flashed the kernel with the "Custom Gingerbread kernel nAa-11" and installed the cyanogen 9 ROM with xRecovery, but when I started the phone (And it's still like this ATM) after the Sony Ericson logo, it appears the XPERIA logo with the lighting animation, it does the animation about 3 - 4 times and freezes after that and stays there, sometimes it does the animation 3 times, disappears and appears the logo again and then freezes.
I realized this happened because I didn't unlock bootloader. I can actually check the bootloader and I get the message that says it's locked but you can unlock it but to unlock it I have to have it turned on with USB debugging on.
Also, sometimes when I try to flash it again, after connecting it and the green light turning on it says I have plugged the device in flash mode, then it says I unplugged it and tells me that an error occurred, then the phone boots up by it-self.
BTW I'm a bit newbie in the section of "flashing" and the kernel and the baseband stuff, I'm not sure if with flashing, you flash the kernel, the baseband, or the ROM it-self, or even if you can install a ROM with the flashtool with the phone on flashmode.
BTW I can't access xRecovery.
- SEUS Says my phone is already up to date and all I can do is click finish.
- PCC Says there's not software available for my phone.
WHAT WOULD BE PERFECT TO FIX THIS:
A way to change the ROM to the android 2.1.1.C.0.0 without booting the phone(in flash mode).
HOW I SOLVED IT
-I simply downloaded this stock ROM (2.1.1.C.0.0): http://www.mediafire.com/?eca0sualnao4c4c
-Then just used flashtool V0.2.9.1 (I think it's important that you use that exact version): https://rapidshare.com/#!download|5...|62602|R~5490459C5764641D4665C046409A620A|0|0
(Sorry for rapid**** host, couldn't get any better)
After that it took the phone about 5~ mins to start up after the 2nd SE logo.
Again thanks to damir87!
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
CosminAdriaan said:
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
Click to expand...
Click to collapse
Thanks for the reply, but Sony PC Companion needs the phone to be ON and on debug mode, actually I can't fully boot the phone and SEUS gets stuck on "checking connection to the phone" or something like that.
Also PCC says there's no available updates for the phone. <.<
Turn off phone , then do what seus asks
Sent from my X8 using XDA
CosminAdriaan said:
Turn off phone , then do what seus asks
Sent from my X8 using XDA
Click to expand...
Click to collapse
The PC companion says there's no software for my phone and,
the SEUS says my phone is already up to date.
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
CosminAdriaan said:
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
Click to expand...
Click to collapse
You mean on the SEUS software? I only get this:
i742.photobucket. C 0 M /albums/xx68/CHAPI92/SEUS.gif
Sorry I can post the link because I don't have 8 posts... <.<
Please copy the link and change the " C 0 M " with "com".
I see , try another version of Seus..
Sent from my X8 using XDA
CosminAdriaan said:
I see , try another version of Seus..
Sent from my X8 using XDA
Click to expand...
Click to collapse
Like 2.7.12.4?
EDIT: I downloaded 2.7.12.4 and it says it cannot check the software version and it won't start.
I need to somehow fix it without SEUS/PCC
BUMP
Any other ideas please?
Dammit , no , im out of ideeas
Sent from my X8 using XDA
Anyone else could help please?
BUMP
Still need help :\.
BUMP
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
damir87 said:
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
Click to expand...
Click to collapse
Even I HATE rapidshare, hotfile, depositfile, share and uploading, I'll trust you and hope it works .
With this you say it'll do everything?
Even the rooting while on flashmode? and instal xRecovery?
Remember I can't access the phone.
BRB In 3 hours with the ****ty 30kb/s, gonna practice shuffle.
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
damir87 said:
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
Click to expand...
Click to collapse
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
PvM Chapi said:
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
Click to expand...
Click to collapse
Re-download...
Sent from my E15i using xda premium
Did you try PC Companion to repair the phone?
If so... do you know how to do that? I'm saying this because I bricked my phone once and I didn't knew hot to use th "repair" option. Only after a big search I found a step by step tutorial on how to do that...
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Flash 2.1 ROM ftf file with flash tool.
Wait I get you the link..
Sent From My W8 Using Tapatalk
Here...
http://www.mediafire.com/?eca0sualnao4c4c
After flashing, you just need to root again...
Sent From My W8 Using Tapatalk
Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
leave batterry and then take back, try to flash with PC companion (back to esclair),,,
don't be affraid, just conect it.,.,,
(because i done this experience month yesterday.,.
#sorry my bad english.,.
well ur a murderer and ull go to jail! lol jk... hope u bring ur phone back to life...
Sent from my MB526 using xda premium
Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
No dont throw your phoe in garbage..
Visit this link
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again
JiaYong said:
This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again
Click to expand...
Click to collapse
When using PCC , don't click on "Update Phone". Your phone won't be recognized.
Click on "Repair Phone" , and follow instructions.
If every thing fails which is doubtfull send it to sony
Problem solved!
Thx u all for helping, harshitgroup your link was proved to be most valuable....
Thank u very much guys!!!!
Welcome ! You got your phone alive?
Two week ago when i played radio from an application on my device while charging it, suddenly my device reboot and reboot again...
Then i was trying reset all data but the problem still exist...
So i followed some guide from this forum by rooting and flashing it using flashtool and using new firmware from provide link ( http://forum.xda-developers.com/showthread.php?p=19684920#post19684920 and http://www.mediafire.com/?d3pobqqc3py66#4c02265ox4l1r )
and the problem was still the same, reboot and reboot again, so i tried using PCC and SEUS but it didn't change anything..
Lately, when i charge my device, it didn't reboot, but when i didn't charge the phone, on some point my device reboot and reboot again and the battery went down to +/- 2-15%
What is really happen to my device ?? Is it battery problem or RAM problem ???
Sorry for my bad english, i am a newbie in this forum...
Thx for your help ..
technaturology said:
Two week ago when i played radio from an application on my device while charging it, suddenly my device reboot and reboot again...
Then i was trying reset all data but the problem still exist...
So i followed some guide from this forum by rooting and flashing it using flashtool and using new firmware from provide link ( http://forum.xda-developers.com/showthread.php?p=19684920#post19684920 and http://www.mediafire.com/?d3pobqqc3py66#4c02265ox4l1r )
and the problem was still the same, reboot and reboot again, so i tried using PCC and SEUS but it didn't change anything..
Lately, when i charge my device, it didn't reboot, but when i didn't charge the phone, on some point my device reboot and reboot again and the battery went down to +/- 2-15%
What is really happen to my device ?? Is it battery problem or RAM problem ???
Sorry for my bad english, i am a newbie in this forum...
Thx for your help ..
Click to expand...
Click to collapse
Using PC Companion: Connect your phone to your PC and turn it on. Look around the update phone section of PC Companion for an option called "Repair your phone". Just follow the steps and your phone will be in working order pretty soon
Use the search option before u post a query!! Hit Thanks
Bunny2rock said:
Using PC Companion: Connect your phone to your PC and turn it on. Look around the update phone section of PC Companion for an option called "Repair your phone". Just follow the steps and your phone will be in working order pretty soon
Use the search option before u post a query!! Hit Thanks
Click to expand...
Click to collapse
i have tried it many times.....and the result is still bootloop:crying:
technaturology said:
i have tried it many times.....and the result is still bootloop:crying:
Click to expand...
Click to collapse
Ok here is the deal!!! Did u select ur device while updating??? or as it ll be updating ur phone as x10 mini which would def cause a bootloop!!
Anyways here is the link jus follow it but select x8 or w8 as your phone!!
http://www.youtube.com/watch?v=i6CMmZ62G3s&playnext=1&list=PLBEDC584C33381AEE&feature=results_video
Hit thanks!!
technaturology said:
Two week ago when i played radio from an application on my device while charging it, suddenly my device reboot and reboot again...
Then i was trying reset all data but the problem still exist...
So i followed some guide from this forum by rooting and flashing it using flashtool and using new firmware from provide link ( http://forum.xda-developers.com/showthread.php?p=19684920#post19684920 and http://www.mediafire.com/?d3pobqqc3py66#4c02265ox4l1r )
and the problem was still the same, reboot and reboot again, so i tried using PCC and SEUS but it didn't change anything..
Lately, when i charge my device, it didn't reboot, but when i didn't charge the phone, on some point my device reboot and reboot again and the battery went down to +/- 2-15%
What is really happen to my device ?? Is it battery problem or RAM problem ???
Sorry for my bad english, i am a newbie in this forum...
Thx for your help ..
Click to expand...
Click to collapse
if you want to find a lighter. fast, and simple to use your flash flashtool only
to tutor the way here
strange problem, maybe it is sd card problem....not sure...
stamatis said:
strange problem, maybe it is sd card problem....not sure...
Click to expand...
Click to collapse
Happened with me once.....
But when i removed sd card & started my phone...it was ok
Sent from my W8 using xda app-developers app
---------- Post added at 12:52 AM ---------- Previous post was at 12:50 AM ----------
I was using link2sd then...
Maybe it caused problem to me
Hit thanks if this worked
Sent from my W8 using xda app-developers app
Gogeta said:
Happened with me once.....
But when i removed sd card & started my phone...it was ok
Sent from my W8 using xda app-developers app
---------- Post added at 12:52 AM ---------- Previous post was at 12:50 AM ----------
I was using link2sd then...
Maybe it caused problem to me
Hit thanks if this worked
Sent from my W8 using xda app-developers app
Click to expand...
Click to collapse
i've tried it, but no luck....
or maybe i am right, the problem is the battery or the RAM...
cause it happen when i listening a web radio and charging my phone....
that time my battery is full but i forget to unplug it, and when it happen, the battery is enough hot....
or maybe my cache memory, that is used by a web radio application is full....
is any of that possible ??
technaturology said:
i've tried it, but no luck....
or maybe i am right, the problem is the battery or the RAM...
cause it happen when i listening a web radio and charging my phone....
that time my battery is full but i forget to unplug it, and when it happen, the battery is enough hot....
or maybe my cache memory, that is used by a web radio application is full....
is any of that possible ??
Click to expand...
Click to collapse
When you close your phone the ram clears,which means there is no way you have this problem caused by ram..
Sent from my X8 using xda premium
Sony Ericsson X8 Bootloop
Hey I will tell you what to do.
First of all install Sony Ericsson Update Service or SEUS. Just Google it and you can find it easily!
Now connect your phone to your computer via USB cable.
Start SEUS.
Then follow the on-screen instructions.(You will be asked to select your phone model,update or repair your phone etc)But its easy!!!!!
Then leave the rest to SEUS.
It will first repair your phone,then download the stock rom and kernel and also the baseband and will automatically install them.
After that you will have your X8 on stock rom,it will be updated to the latest baseband and kernel.
Hope it works for you.
Leon1234 said:
Hey I will tell you what to do.
First of all install Sony Ericsson Update Service or SEUS. Just Google it and you can find it easily!
Now connect your phone to your computer via USB cable.
Start SEUS.
Then follow the on-screen instructions.(You will be asked to select your phone model,update or repair your phone etc)But its easy!!!!!
Then leave the rest to SEUS.
It will first repair your phone,then download the stock rom and kernel and also the baseband and will automatically install them.
After that you will have your X8 on stock rom,it will be updated to the latest baseband and kernel.
Hope it works for you.
Click to expand...
Click to collapse
please dont spam!!!! how many times will you copy paste this post of yours?
op clearly states that he have tried with seus.
sorry
stamatis said:
please dont spam!!!! how many times will you copy paste this post of yours?
op clearly states that he have tried with seus.
Click to expand...
Click to collapse
sorry,what should i do?
Leon1234 said:
sorry,what should i do?
Click to expand...
Click to collapse
Nothing now
But don't repeat this in future
sent from my W8 using client-server technology
Leon1234 said:
Hey I will tell you what to do.
First of all install Sony Ericsson Update Service or SEUS. Just Google it and you can find it easily!
Now connect your phone to your computer via USB cable.
Start SEUS.
Then follow the on-screen instructions.(You will be asked to select your phone model,update or repair your phone etc)But its easy!!!!!
Then leave the rest to SEUS.
It will first repair your phone,then download the stock rom and kernel and also the baseband and will automatically install them.
After that you will have your X8 on stock rom,it will be updated to the latest baseband and kernel.
Hope it works for you.
Click to expand...
Click to collapse
stock rom, baseband ?? where is it in SEUS ? i don't find any of them.....
is your prob same as mine? Keep rebooting at Sony Ericsson logo?
boonwuilow said:
is your prob same as mine? Keep rebooting at Sony Ericsson logo?
Click to expand...
Click to collapse
yes, just like that.....
technaturology said:
yes, just like that.....
Click to expand...
Click to collapse
it happens to me also.but the only solution that i got to fix is reflashing a X8_E15i_2.1.1.A.0.6_Baseband_015.ftf. :laugh: i fix my bootloop
technaturology said:
yes, just like that.....
Click to expand...
Click to collapse
For my case, it will bootup with 1.6 stock rom, the baseband will be stated unknown, but it still can call and receive SMS...
Any rom that is above 2.1 won't be able to boot, that include stock 2.1 and any custom rom...
It only can be repaired by SE i think (or maybe JTAG )...
So in the end i gave up the phone and sold it at a cheap price to a friend and he took it to SE for repair, the phone comes back with stock 2.1 ROM
but the camera and vol button are not working, most probably damaged by the repair guy in SE...
Btw, any one knows what causes the baseband to gone like that?
playjun said:
it happens to me also.but the only solution that i got to fix is reflashing a X8_E15i_2.1.1.A.0.6_Baseband_015.ftf. :laugh: i fix my bootloop
Click to expand...
Click to collapse
can you upload the baseband or where i can download it...???
technaturology said:
can you upload the baseband or where i can download it...???
Click to expand...
Click to collapse
Use search
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??
Hello,
this is my first post, i hope do not wrong,
my problem with x8 is locked after flash root,
device now no turn on and no flash mode with back button,
I read all the posts in the forum but have not found the solution,
I tried flash tool, seus, pcc, nothing has changed, back button not work,
it is possible that the phone is very damaged after flash went wrong?
Thank you very much to all
nobody knows anything? Help please
paljamp said:
nobody knows anything? Help please
Click to expand...
Click to collapse
i have same problem like u too..that call hardbrick/deadbrick...i just wait for someone pro about this answer it...
newbiedino said:
i have same problem like u too..that call hardbrick/deadbrick...i just wait for someone pro about this answer it...
Click to expand...
Click to collapse
Have you read this ( http://forum.xda-developers.com/showthread.php?t=1356349 )? If you read and try every thing and your Xperia x8 is still Hardbricked than it probably is a hardware problem. In that case the only way to repair it is to take it to a Cell Phone Repair Shop and pay to get it fixed. As far as I know there isn't a way to repair it yourself unless you have a JTAG Box and some knowledge on electrical engineering.
what is exactly did u flash??
rooting your phone can't damaged your phone
but if u flashing wrong kernel, u can brick it
thanks for the replies, I tried everything, all the guides xda but nothing, I think it's a hardware problem, but it is strange happened when it was being updated, it is off and you are no longer on however, the strange thing is that it does nothing, it is as if the back button does not work, but it works
paljamp said:
Hello,
this is my first post, i hope do not wrong,
my problem with x8 is locked after flash root,
device now no turn on and no flash mode with back button,
I read all the posts in the forum but have not found the solution,
I tried flash tool, seus, pcc, nothing has changed, back button not work,
it is possible that the phone is very damaged after flash went wrong?
Thank you very much to all
Click to expand...
Click to collapse
you need to flash your x8 with app like seus or flashtool
anandabayu12 said:
you need to flash your x8 with app like seus or flashtool
Click to expand...
Click to collapse
LOL, do you know how to read?
He said "I tried flash tool, seus, pcc, nothing has changed, back button not work".
please give me flashtool sir. i can't download the file from my browser
Sent from my GT-S5300 using xda premium
syatibi said:
please give me flashtool sir. i can't download the file from my browser
Sent from my GT-S5300 using xda premium
Click to expand...
Click to collapse
http://www.flashtool.net/download.php
use seus or pc companion
Afiqskull5 said:
use seus or pc companion
Click to expand...
Click to collapse
LOL, have people lost the abilty to READ??? :silly:
TheScriptKitty said:
LOL, have people lost the abilty to READ??? :silly:
Click to expand...
Click to collapse
maybe he blind hahaha:laugh:
try out seus its helps
---------- Post added at 07:17 AM ---------- Previous post was at 07:13 AM ----------
or try out stock ftf with flashtool....