Related
Hi there,
First things first I'm a big noob when it comes to tweaking/flashing/anything with a phone; and life just confirmed it.
All I wanted was to make pics without shutter sound, to capture powerpoint screens in college instead of having to write ten sentences in 10 seconds. I couldnt just turn the shutter sound off! After some reading I thought I needed to both get my P880 rooted and needed CWM Recovery; I managed to do everything exactly as stated here:
Rooting:
http://theunlockr.com/2013/01/14/how-to-root-the-lg-optimus-4x-hd/
Installation of CWM Recovery:
http://theunlockr.com/2013/01/14/how-to-install-clockworkmod-recovery-on-the-lg-optimus-4x-hd/
After that I tried to install this rom via CWM Recovery -> install from SD/zip file -> CWM_deodex_rom_v10e_signed.zip
http://forum.xda-developers.com/showthread.php?t=1871858
I did that because this mod had the camera mod I wanted installed already.. The installation went fine, the phone stated.
But when I hit reboot, it got stuck in bootloop.. All I can do now is press PWR + Vol down (read that after some googling) and enter 'Android system recovery <3e>'.
It shows this list of options (above a picture of a dying android with a red exclamation mark on top of it)
reboot system now (done that few times now, gets stuck in bootloop everytime.. Well I think it's that. It gets stuck at the LG screen, it's my interpretation that that is the correct use of the word bootloop)
apply update from external storage (well please dear lord let there be an escape through this option)
wipe data/factory reset (no results after hard resetting, still bootloop)
wipe cache partition (did this too)
apply update from cache (not this, why whould I)
wipe nv partition (did this too)
Toggle Console VART Log (and well, I don't think this option's going to save me)
I wanted an option to turn off the shutter sound. Well, things changed. Right now I'm willing to do anything to get the phone back to life! Google couldn't really help me out.. Well better stated: I can't help myself out using google, so I'm asking for your help! Please all XDA tweakers, modders, hackers, etc. unite and help! It is appreciated A LOT! Please state what I need to do now, I just want to get it back to a working state. Or please confirm that it is not completely BRICKED ;x
edit: I followed some advice from the unbrick-thread http://forum.xda-developers.com/showthread.php?t=1843830
Now I'm stuck @ S/W Upgrade - Please wait while upgrading ... screen. Please help me out
edit 2: What I'm doing now.. via the LG PC Suite -> Lg Mobile Support Tool -> Recovery (you need to fill in either IMEI or S/N and model)
Status: Downloading the LG Mobile Phone Software Update program. Est time left: 44:40 for 400mb.. Nice server
Re-flash using LGFlash Tool.
Use compatible .dll depending if its v10x or v20a.
Search a little, there's a lot of info about that
Wait, my stock v10c's camera already had the function to mute the shutter sound. Why did you need to do anything else?
RuedasLocas said:
Re-flash using LGFlash Tool.
Use compatible .dll depending if its v10x or v20a.
Search a little, there's a lot of info about that
Click to expand...
Click to collapse
I managed to get my hands on the latest version of LGNPST - I suppose that's what you mean with LGFlash Tool.
But how do I know if the phone is v10x or v20a.. ? I think all methods to look that up are blocked, since Im in bootloop with only android system recovery <3e>
Thanks!
nvm: just found this thread http://forum.xda-developers.com/showthread.php?t=1861854, found out that you are an awesome guy!
just flashed to v20a, she's back alive
japzz said:
I managed to get my hands on the latest version of LGNPST - I suppose that's what you mean with LGFlash Tool.
But how do I know if the phone is v10x or v20a.. ? I think all methods to look that up are blocked, since Im in bootloop with only android system recovery <3e>
Thanks!
nvm: just found this thread http://forum.xda-developers.com/showthread.php?t=1861854, found out that you are an awesome guy!
just flashed to v20a, she's back alive
Click to expand...
Click to collapse
and congrats for you got your option to silently take pics after all
Haha yeah lulz, thanks!
My D415 has been out of action for about two or three weeks now and it sucks having no phone. I'd like it back but all the hours I've spent trying to fix it have been pointless due to very poorly-made guides that are either difficult to understand or simply false.
If I follow this guide: http://www.lg-phones.org/how-to-flash-unbrick-lg-l90-back-to-stock.html
It gets stuck forever on step 7, with the computer refusing to recognize that I've connected the phone no matter what I do. Note that this includes skipping download #3 because I already have the stock KDZ downloaded, could this be the issue?
If I follow this guide: http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
It gets stuck forever on step 1, with lg-firmware-rom.com not actually existing.
If I follow other guides, other **** happens, like LG Mobile Support Tool continuously "downloading" the USB driver without the progress bar or anything actually moving.
My computer is getting cluttered with various copies of roms and KDZs and drivers and random pieces of software from all the attempts to do this, I've spent hours trying to get it done, and I'm tired of not having a phone. Could anyone give me a way to do this? The phone is currently on a 5.0.2 ROM with baseband issues and TWERP as its recovery, IIRC. I'm good with computers, though inexperienced with Android tweaking. All I need is a reasonably concise guide that actually works.
Well, the first thing I would do personally is to delete all of the extra files you dont need. It always helps to have a clean work space. Then uninstall all drivers you have installed
.
Download and install the drivers from here: (http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425). Restart your PC and verify all drivers are installed correctly through device manager.
Download this KDZ (http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWB7G2U032NVA6P70FE44UV/D41520b_00.kdz) This is the one I used and it works fine.
You also need LGFlashTool, which is what you run first when you're trying to flash back to stock. (http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip)
Close out any programs you aren't using just to make sure there aren't any conflicts.
Reboot into download mode, verify in device manager that your phone is recognized correctly. Run LGFlashTool. Change PhoneMode to EMERGENCY. Click on the little folder icon next to Select KDZ file. Navigate to your KDZ and select. Hit normal flash.
When the next screen pops up, just hit START in the bottom right hand corner.
Another box will come up. Where is says Country, select different country. Language, select English. Hit OK.
The LG Mobile support tool will come up and should start flashing your phone. Chill and let it do it's thing.
IF it happens to say that the phone is disconnected, don't hit anything. Just unplug your phone and reboot it into download mode. Should automatically start flashing.
Hopefully this helps. If you want, I can link you to my collection of files I use.
EDIT: This is essentially the guide from above, I'm just linking you to the files I used more or less. I also realize I'm a bit late lol. Hopefully this either helps, or you have it solved.
My phone keeps saying settings stopped working and google play store stopped working over and over and my computer is not recognizing the device? Any help on this?
Sfvgal said:
My phone keeps saying settings stopped working and google play store stopped working over and over and my computer is not recognizing the device? Any help on this?
Click to expand...
Click to collapse
Backup and factory reset (wipe caches and data)?
If still broken, reflash stock (if you have TWRP then look for a flashable zip, if not kdz is the only way), wiping system partition first.
NOTICE: ZV6 or higher Users - Received reports that attempting to revert to ZV5 may brick your device.
Recommend holding off for now, will try to get ZV6. (Also attempting to confirm.)
OK, I know folks have been in need and an anonymous source has been kind enough to share.
Here is the TOT for LS991 ZV5. I'm passing it on to @autoprime who will be adding more below on how to use it.
Please make sure to give Team Codefire a huge thanks for what they do with LG devices.
It's one thing to get restore files, it's a completely different (and much more challenging) one to do things like root it.
Cheers!
ZV5 TOT is out!
Don't use this TOT if you are on ZV6 or higher.. you will brick.
Thanks to an anonymous donor and to @garwynn we now have the ZV5 TOT. No more soft bricks! I have also broken down the TOT and uploaded the individual partitions.
Changelog:
Fix for Google Factory Reset Protection issue that does not allow user to bypass WiFi after performing a ##RTN on the device. User can now bypass WiFi
LG has also implemented a touchscreen enhancement into the software
ZV5 also updates the bootloader version from v0 to v1.
--TOT can be downloaded *HERE*
For those familiar with LG's.. this is flashed the same way as previous models... LG OG, G2, G3 etc etc.
1. Download LG Flash Tool. Swap the included mega.dll (click here to see video)
2. Download the LGFLASH_LG_G4_CODEFIRE.dll
3. Download the ZV5 TOT and unzip it.
4. If LG drivers are not already installed, download and install them.
5. Place phone into download mode
6. Set phones serial COM port to COM41 in Windows Device Manager. Unplug USB cable then plug it back in.
7. Run LG Flash Tool.
8. Select LGFLASH_LG_G4_CODEFIRE.dll for DLL, LS991ZV5_05.tot for TOT and check off "BOARD DL"
9. Hit OK to continue. Now hit the yellow start button. LG Flash Tool should now perform a CRC check on the TOT.
10. Unplug the USB cable again then plug it back in... wait 5-20 seconds and hopefully the flash should now start.
When it finishes it'll boot into miniOS. Hold the power button then press the "Normal Boot" option on the screen.
The above steps are "to the point" and there's not much hand holding so new LG flashers may be a bit confused. Feel free to ask questions in this thread and hopefully other users will chime in and assist with specific questions. But for extra help here is a how-to video going over the process. Only differences is phone model and TOT/DLL files used... rest can be applied.
Also here is a G4 Return to Stock thread... the lower section of the OP has step by step directions and screenshots for the entire LG Flash install process and TOT flash.
--Individual ZV5 partitions to flash manually can be downloaded *HERE*
Stock system.img is not included in that list due to redundancy. The stock rooted ZV5 system.img can be found in the Low Effort Root thread.
--ZV4-to-ZV5 OTA update.zip *NOTYETAVAILABLE*
This was links somewhere previously... I'll have to look for it again.
You must be on ZV4 and have a stock recovery and stock system partition for this to work.
Directions:
1. Rename downloaded .zip into update.zip
2. Remove USB cable from phone.
3. Power phone off.
4. Press and hold volume down + power until you boot into stock recovery.
5. Select "update with adb"
Code:
adb sideload update.zip
Alternate Directions to skip using ADB (needs microSD card):
1. Format microSD card as EXT4.
2. Rename downloaded .zip to update.zip
3. Move update.zip onto external SD card. EZ way would be to stick SD card in phone then connect phone to PC and use MTP.
4. Power off and boot into stock recovery (vol down + power)
5. Select the Update from SDCARD option.
Click to expand...
Click to collapse
thank you so much, whoever leaked this!
and of course OP and codefire..
:highfive:
You guys are awesome!
Edit: Getting a 403 Forbidden on the LGFLASH_LG_G4_CODEFIRE.dll
All fixed! Thanks autoprime!
Went through everything, after rebooting at the end of th LG Flash Tool, phone rebooted to Factory Reset Status 2, blue screen.
UPDATE 1: Now the LG Flash Tool is not even starting to flash. The phone is back in DL mode and eveything is as it should be, but the flash tool is not doing anything
UPDATE 2: Switched USB ports, oddly that made LG Flash Tool Work. USED BOARD DL AND IT WORKED.
Instructions for Linux?
Which TOT file should be used? The one posted by garwynn (1.59GB) or Autoprimes? (1.98GB) TOT? whats the differences?
SGSIIIJB said:
Which TOT file should be used? The one posted by garwynn (1.59GB) or Autoprimes? (1.98GB) TOT? whats the differences?
Click to expand...
Click to collapse
I'm fairly certain they're the same, they're just using different compression methods (.7z in garwynn's post, .zip in autoprime's). .7z is a better method of compression, thus the smaller file size. The .tot files should be the same size when extracted.
Any way of using this TOT method after flashing the US991 firmware(I mistakenly flashed it thinking it's the KDZ for Sprint)? I keep getting "DoDownload Error!!!"
kyle1867 said:
Instructions for Linux?
Click to expand...
Click to collapse
run windows in a virtual machine. or find a windows computer. or reverse LG's download mode protocol, extract the tot and find a way to flash it over a serial connection in linux.
BeardKing said:
I'm fairly certain they're the same, they're just using different compression methods (.7z in garwynn's post, .zip in autoprime's). .7z is a better method of compression, thus the smaller file size. The .tot files should be the same size when extracted.
Click to expand...
Click to collapse
yup
ijball said:
Any way of using this TOT method after flashing the US991 firmware(I mistakenly flashed it thinking it's the KDZ for Sprint)? I keep getting "DoDownload Error!!!"
Click to expand...
Click to collapse
Try flashing the rooted Sprint system.img thru download mode.. just as if you were rooting. putting sprint system.img on the phone might get around the error. actually... as I'm typing this.. you might be able to just edit the build.prop in the us991 rom. if you use a build.prop editor make sureyou also have busybox installed or many buildprop apps wont actually work. and you'll need root to edit build.prop of course.
if no root.. might as well just flash the rooted sprint system.img tho. see how that goes.
Thanks for this! I've been waiting almost a month! So happy it's finally out!!
Quick question; my phone is rooted and has been running xposed for weeks no problem. Today, the phone randomly rebooted and has since been in a boot loop that sometimes ends with "secure boot error error 1006" in top left corner of the android boot screen a second then restarts. I believe can still enter download mode to the point where it asks to "update firmware, do not unplug..."but sometimes I get the secure boot error here as well.
I assume I should attempt to fix this with the tot? Anyone else have any suggestions? I don't want to mess the phone up further if there are easier ways to fix this.
Jessooca said:
Nope. Use the tot and restore it then root it again.
If you've never used a tot or lg tools to restore am LG device it's very easy and won't take long at all.
Click to expand...
Click to collapse
After I completed the tot I attempted to reboot. I now have an security error 1007 error code in the top left and also a security error; authentication problem #9.
Edit: I pulled the battery and now it seems Android is starting and doesn't show the error code but freezes shortly after boot before it restarts itself?
I assume I have to reroot it to get around this error code as well but I am unable to enable mtp or usb debugging before it restarts
Jessooca said:
Nope. Use the tot and restore it then root it again.
If you've never used a tot or lg tools to restore am LG device it's very easy and won't take long at all.
Click to expand...
Click to collapse
Jessooca said:
At the end of flashing the TOT with the Lg Tool you may have been on the screen where you have to "press normal + reboot* hopefully that's the option you pressed. IF you haven't a clue what I am talking about, then you for some reason got a different screen.
Once you use the TOT file and restore using the LG Tool (and the tutorial mentioned) you should be fully back to stock like you just got the phone, without any issues. Did you make sure you chose BOARD at the bottom left of the Manual selection of the dll & added the tot?
Click to expand...
Click to collapse
I responded in PM but yes, I used BOARD and I was able to get to the MiniOS screen where you hold power and select normal + reboot. It's after rebooting where it continues to a) boot loop till a blank screen appears and only a battery pull can trigger another boot B) Gets to android but then freezes before I can even activate C) Shows secure boot error code 1007 or Security error; authetication code #9 and prevents the boot.
The upgrade method triggers the same blue screen as others have mentioned. I really don't know what went wrong with the phone in the first place, I had been rooted and using xposed without any new apps or updates for the last couple of weeks. The phone literally rebooted while it was charging and hasn't been right since even after using the tot.
I may try my other computer for just to test -> Just tried and same thing happened; either boot loops, security error, or makes it past the Sprint Spark screen and android is starting screen before freezing.
Has anyone successfully restored TOT? Seems like a lot of folks are having issues.
Jessooca said:
I have. I tested the file just to make sure it worked. What issue are YOU having?
It's honestly a fairly simple procedure. You can watch this video (I believe it's also mentioned in the beginning of this thread)
https://www.youtube.com/watch?v=1WgXuxDbmbc Pretty much all you need is from 2:45 and on in the video.
Just be sure to select BOARD at the bottom of the screen, when selecting the dll and adding the tot file. At times people have forgot to change it from upgrade to Board.
-After it's finished
Pull the battery, hold Volume UP and Power, let go of Power on the LG Logo screen as mentioned for one second, Press power again while continuing to hold Volume Up and you'll get into recovery, do a wipe and reboot. It should fix any other issues.
Click to expand...
Click to collapse
I'm not having any issues. Just looking ahead if this is a safe recovery path.
mswlogo said:
Has anyone successfully restored TOT? Seems like a lot of folks are having issues.
Click to expand...
Click to collapse
I have. It worked great.
Worked, thanks.
Like a dumb ass i unplugged the phone right at the end blue screen number 2 and it said failed.. am i able to repeat the steps and get it going again or did i just ruin the phone
This is the screen thats shown
Well guys i was having problems as most of you guys saw on the the unoffical TOT thread but thanks to @autoprime for mentioning LG UP i was finally been able to get past status 2
Disclaimer:
I am not responsible with what happens to your device when using this program.
DO NOT TRY TO FLASH BACK TO ZV5/ZV4 OR YOU WILL BRICK YOUR PHONE.
ATTENTION: DO NOT TRY TO FLASH BACK FROM ZVB TO ZVA OR BELOW BECAUSE OF A NEW ANTIROLL BACK PATCH.. AGAIN IF YOU DO YOU WILL BRICK YOUR PHONE
Requriements:
-LG UP: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
- TOT Files:
Android Lolipop 5.1 ZV6 - http://forum.xda-developers.com/sprint-g4/development/restore-sprint-lg-ls991-zv6-tot-t3213196
- Micro USB cable from phone to pc and Drivers: http://forum.xda-developers.com/g4/general/lg-g4-drivers-t3127648
Steps to downgrade
1. First download and install LG UP from the thread BOTH MSI files.
2. Now put your phone into download mode via holding down the volume + and plugging it in to the usb.
3. Fire up LG UP and at first it may say UNKNOWN on the window so what you wanna do is disconnect and reconnect wait a few seconds and it should work.
4. Now it should say LS991 and select it and click ok
5. Now on the window select your ZV6 TOT FILE and select UPGRADE
6. On the bottom of the window there should be three dots click on them and find your tot file.
7. Click start.
8. After that your phone should start progressing
9, Should restart and work.
10. If it dosent make sure you factory reset!! (Hold down volume down and the power button and power then go the factory reset and wipe it)
To fix status 2 error
Thanks to @autoprime
1. flash zv6 and get stuck at blue screen.
2. power off phone and close lgup.
3. boot into download mode again.
4. this time.. instead of using LGUP.. use LG Flash method.
5. make sure you set LG Flash to use "Board DL" at the bottom of the screen where u select dll and tot.
6. should be able to flash either zv6 or zv9 using LG Flash (with Board DL option).
Glad you finally got it figured out...I must have gotten really lucky as I also got the dreaded 2 the first time but after uninstalling and reinstalling everything I was able to get around it...I am bookmarking this for future reference. Thanks again for your and @autoprime work.
Sent from my LGLS991 using Tapatalk
Thank you! You are a savior! I'll try to do it once I get home and update my post.
Finally, a sigh of relief. My phone is back from the dead!
Just tried this and it still didn't fix status 2. I get the error, but instead of continuing on the phone, it stops. It just hangs at 0%. I guess I may be sending this phone into LG (praying that they will fix it). I cannot afford a new one.
I have status 2 still.
ironbesterer said:
Just tried this and it still didn't fix status 2. I get the error, but instead of continuing on the phone, it stops. It just hangs at 0%. I guess I may be sending this phone into LG (praying that they will fix it). I cannot afford a new one.
Click to expand...
Click to collapse
Weird well I DONT remember what I exactly did sorry guys
Got my phone working did the steps 1-7 above but used zv6, then I went back to the flash tool and used the zv9 tot, board dl and it went through swimmingly.
Im going to update everyone that you CANNOT FLADH BACK TO Z5 OR ELSE YOU WILL BRICK YOUR PHONE!!
Where does the ZV9 tot file come from?
just got the ota notice this morning. i assuming its MM. is it pretty simple to downgrade back to zv6 (what phone came with stock). u have used lg up for fix bad flash but not comfortable with the lg flash method. aka open a comand window in lg root folder (method) is there a another flash method in case i get this "error 2"
thanks in advance.
So, tried downgrading to ZV6 from ZV9 and get stuck on Sprint boot image looping. Any suggestions on how to get it to boot correctly?
Has anyone successful downgraded back to ZV6 from ZV9?
Awesomeslayerg said:
Im going to update everyone that you CANNOT FLADH BACK TO Z5 OR ELSE YOU WILL BRICK YOUR PHONE!!
Click to expand...
Click to collapse
So to be clear did you had ZV9 and did a successful downgrade to ZV6 using your steps??
Well, yes, kind of painful since I got stock on the Sprint Spark boot image (no boot loop, just the image) . So the painful part is that I needed to do a factory reset from factory recovery (lost everything )... but it then went ok.
surge27 said:
So, tried downgrading to ZV6 from ZV9 and get stuck on Sprint boot image looping. Any suggestions on how to get it to boot correctly?
Click to expand...
Click to collapse
Factory reset
Awesomeslayerg said:
Factory reset
Click to expand...
Click to collapse
That did it. Can confirm it works, followed all steps in the downgrade section and effectively it got stuck on the Sprint Spark image, had to go into recovery mode, select wipedata/factory reset and reboot phone. Im back from ZV9 to ZV6.
Awesomeslayerg said:
Factory reset
Click to expand...
Click to collapse
Worked for me too...on ZV6 now and going back to UltraPop.
Already have stock mm. Can I still root it? Where do I go? I'm fine with zv9. Or has root not been figured out yet..
worked. downgraded stuck on spark, then factory reset. working and updating as we speak
thank you
I have been able to flash back wards and forth using both flashing tech. Using LG UP and the old flashing way. Don't know why it worked but it did. Also pulled out as soon as the phone hit 100%.
I decided to create this thread for the many who have attempted to downgrade their AT&T Samsung Galaxy S5[and failed]. The many videos and threads that claim the 100% success rate for downgrading all models of the S5 are terribly mistaken.
In the link I'm providing four files to help all, from noobs to intermediate to maybe even advanced users.
*I am not a developer just someone who was persistent enough to have scavenged for these files and figure out the order to use
Steps:
1. Download all files and place under one directory. (make a new folder for these files to be placed in, make them easy to find.)
2. Run Samsung_USB_Driver_for_Moblie_Phones_v1_4_6_0
3. Unzip Odin3_v3.10.7
4. In Odin3_v3.10.7 folder run Odin3_v3.10.7.exe
5. In Odin select options tab and double check the default of Auto Reboot and F. Reset Time (These should be the only selected)
6. In Odin click AP and navigate to G900A_OC4_Stock_Partitions.tar and open (wait 10-30 seconds for Odin to respond and load)
7. Boot phone into Odin download mode (Press Volume down + home + power on) [for convenient reboot take back panel off and dis->re connect battery]
8. Plug in phone. Under ID:COM it should be blue this means the drivers are properly installed and cable is a sync data cable.(Not charge only)
9. Press start. Wait for PASS to show. Press reset. Unplug phone.
10. Phone will reboot to Samsung powered by android logo. (You've won the first battle)
11. Reboot into Odin download. (Take out battery, shove back in with button combo)
12. Unzip G900A_5.1.1_Fix
13. Plug phone back in and flash under AP the files in order, resetting phone into download mode each time. (boot, modem, NON, recovery)
On final boot put back panel back on and wait on the at&t symbol for 2-3 minutes.
I hope this thread is easily found and my instructions are clear enough that I help all who have had my same problem I've fretted over the past 2 days.
S5 Fix All SM-G900A - Google Drive
drive.google.com
Credit goes to for:
-Initial fix: http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652 (second link on thread)
-Final and true fix: http://mobile.techforums.space/mobi...sung-galaxy-s5-g900a-on-511-oi5-7fb1114c.html
thank! mod
DOes this work for unrooted too?
I just got an AT&T s5 came with 5.1.1. and out of the blue it started bootlooping. Could not get into recovery but could get into download mode.
Just found this thread was going to try but now seems to boot. Not sure what happened. I did several battery pulls.
In any case good to know if this works in case it happens again.
Any idea why I would boot loop? Did nothing to the phone other than disable some system apps. But did not try to flash anything
Yes
Canadoc said:
DOes this work for unrooted too?
I just got an AT&T s5 came with 5.1.1. and out of the blue it started bootlooping. Could not get into recovery but could get into download mode.
Just found this thread was going to try but now seems to boot. Not sure what happened. I did several battery pulls.
In any case good to know if this works in case it happens again.
Any idea why I would boot loop? Did nothing to the phone other than disable some system apps. But did not try to flash anything
Click to expand...
Click to collapse
Yes, this method can be used on unrooted s5. I can say this with 100% certainty because mine wasn't rooted.
Would this method work for the GS5 active? I have the same issue...
Thank you man this save my phones life
Spent 7 hours trying to fix this, this was giving me such a migraine headache, I am happy to say that my phone is back thank you so very much this is greatly appreciated for this easy to follow step by step instructions
Mirrors for Download
Can mirrors for the download be provided, please? Can not seem to download from the google drive.
Importance of Step 2?
My Phone seems to be working after Step 10. What is the importance of the next steps? Thank You.
After Step 10
meisteryaw said:
My Phone seems to be working after Step 10. What is the importance of the next steps? Thank You.
Click to expand...
Click to collapse
The next steps are if part of the boot process was overwritten by trying to downgrade. This would happen if part of the downgrade flash in Odin was successful.
No
mrredcon2 said:
Would this method work for the GS5 active? I have the same issue...
Click to expand...
Click to collapse
I wouldn't recommend using these (zip/tar) files. However, you can use this process, but you need g870a files. These files are to fix the 900a.
Sure
meisteryaw said:
Can mirrors for the download be provided, please? Can not seem to download from the google drive.
Click to expand...
Click to collapse
Anyone who is able to download is free to make a mirror for these files. I, however, have no idea how.
I don't know why you wouldn't be able to access them. Anyone who clicks the link has access. (You may need to be logged into google.)
Mistake
I screwed up. I thought one of my replies wasn't being posted, didn't see second page.
Now I can't delete this.
I will re-edit this to answer a question.
P.S. sorry for taking so long with answers, I hadn't checked thread in a while.
If urgent you are more than welcome to private message me.
Thank you. This worked for me. I made the mistake of taking the AT&T automatic upgrade to Android 5.1.1 and then trying to downgrade to 4.4.X. and got the Samsung Galaxy S5 splash screen freeze. After too many hours of trying to find a downloadable AT&T Android 5.x version as someone suggested, I came across this post. Thank you again. Once suggestion, I would check sum the downloads so people know what they are getting is legit (I hope these download are . Also the Odin v3.10.7 failed to install on my Windows XP system, but I did have a Odin v3.10.6 that worked fine.
:good:
Hi... can I use this method to upgrade my ATT S5 with android 4.4.4.?
Stuck on startup logo even though i can hear the the startup sound ....
Suggestion
aamszia said:
Stuck on startup logo even though i can hear the the startup sound ....
Click to expand...
Click to collapse
Once you go through this procedure try going into stock recovery, (same button combo only vol up instead of down) then clear cache and/or factory reset. Then redo the second half(5.1.1 stock partition tar flash)
Looks like this should become a sticky for all us AT&T SM-G900A's stuck around 5.1.1.
I will do this process in the next day or so. I assume no PIT file is needed?
I ready to do this. unlocked and rooted all my phones but this one over the years. . .
QUESTION: I purchased this at 5.1.1 C015 upgrade. Does this method helped attaining root (not mentioned anywhere), or just flashing 5.1.1 stock again? I dont need a flash a ROM already working, although still containing bloatware and major battery drain.
Birkyjon said:
Once you go through this procedure try going into stock recovery, (same button combo only vol up instead of down) then clear cache and/or factory reset. Then redo the second half(5.1.1 stock partition tar flash)
Click to expand...
Click to collapse
already done that .. still same problem ...
what should i do next ???