I rooted my phone successful few days ago by this guide. Now I want Custom ROM so I need to install Clockworkmod Recorvery before I can install Custom ROM. I tried to install CWM by this guide but I got problems. When I push Start in Odin it starts...:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification. ...but freezes there.
Any ideas? I tried other USB port and other USB cable but no help. I can't try on other PC because I have only one PC. My main computer is Mac and Odin won't run on Mac.
finAndroid said:
I rooted my phone successful few days ago by this guide. Now I want Custom ROM so I need to install Clockworkmod Recorvery before I can install Custom ROM. I tried to install CWM by this guide but I got problems. When I push Start in Odin it starts...:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification. ...but freezes there.
Any ideas? I tried other USB port and other USB cable but no help. I can't try on other PC because I have only one PC. My main computer is Mac and Odin won't run on Mac.
Click to expand...
Click to collapse
flash it by stock recovery... can you?
flash this cwm using stock recovery.
Hey finAndroid, can your phone still detected by Odin
if YES : flash a stock firmware and use stock recovery to flash above sph21 's CWM
if NO : you got a big problem, because bootloader has been wrongly written. In this case, you need professional service to fix
i just flash my mini to have a CWM recovery, but im confuse if i did it correct
i followed the step by step, odin says PASS, and my phone reboot, but my apps aren't, deleted..
when i watched on youtube... flashing galaxy S to havwe CWM, it deleted all his apps... CONFUSED
Use only Odin 4.38, I once tried 4.4x and it just didn't work.
aallialyssa said:
i just flash my mini to have a CWM recovery, but im confuse if i did it correct
i followed the step by step, odin says PASS, and my phone reboot, but my apps aren't, deleted..
when i watched on youtube... flashing galaxy S to havwe CWM, it deleted all his apps... CONFUSED
Click to expand...
Click to collapse
no data will not be wiped after flashing cwm
Related
How to do..
I install CWM RE, then the phone broke:crying:
how to unbrick...
odin:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Are you able to go to either of download mode or recovery mode??
How did you brick it? What were you doing when it happened?
Hope not ROM manager
Sent from my rooted microwave
Kabir Saxena said:
How did you brick it? What were you doing when it happened?
Hope not ROM manager
Sent from my rooted microwave
Click to expand...
Click to collapse
I'm installing CWM recovery in Android recovery
loading ...the screen was black..:crying:
After that the device was brick
kahei1998 said:
I'm installing CWM recovery in Android recovery
loading ...the screen was black..:crying:
After that the device was brick
Click to expand...
Click to collapse
Where you using ROM manager?
Sent from my rooted microwave
chalak said:
Where you using ROM manager?
Sent from my rooted microwave
Click to expand...
Click to collapse
Android Recovery 3e
I install CWM5.0.2.0
but ACE is 5.0.2.6
kahei1998 said:
How to do..
I install CWM RE, then the phone broke:crying:
how to unbrick...
odin:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Click to expand...
Click to collapse
If you can get to download mode (can see download on screen) Then it is fixable with Odin. If you cannot see download then im afraid you are like me with a bricked Ace. Only service centre or jtag will work.
Rename ops to "COOPER_v1.0.ops" (without quotes)
Sent Via XDA™ Premium
Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik
Dematik said:
Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik
Click to expand...
Click to collapse
Hi Dematik!
You can read about similar issues here (unsolved)
or here or this or this
It looks bad, but...
Good luck anyway.
Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.
Dematik said:
Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.
Click to expand...
Click to collapse
Hello Dematik!
You enter in recovery mode when you press just 2 buttons: Home + Power.
You're welcome.
Good luck.
Well I'd suggest you to try the "POWER + HOME + VOLUME DOWN" combo instead of the one you tried, because they are different. If a yellow "downloading..." appears in the middle of a black screen you are in the right downloading mode that should work with odin, just talking from my experiences
Or If you can open CWM, then just flash another Rom if not Odin is your last choice
If you are getting an error of cannot connect to the serial port, reinstall the drivers and flash via Odin.
Press that damn thanks button even if I didn't help you. I just love to earn more of them
Hi everybody ! First of all, i'm sorry for my poor english. I have a Samsung Galaxy Mini S5570, whit Android 2.3.6. Yesterday the phone works ok almost all day, but in the evening it shut down. I try to turn it on, and it appers on the screen the Galaxy Logo and that's all. I enter in the recovery mode and try to do a wipe data\factory reset but the result is the same. I have an error it sound like this: rfs for at failed on /dev/stl13 and /dev/stl14. What can i do ? I am a begginer at Android and i don't know very more. Please help me, step by step, to do something whith my phone, and fix it. Thank you everybody.
is the first time i've heard this problem. try to check some solution
danyhhh said:
Hi everybody ! First of all, I'm sorry for my poor English. I have a Samsung Galaxy Mini S5570, whit Android 2.3.6. Yesterday the phone works ok almost all day, but in the evening it shut down. I try to turn it on, and it appears on the screen the Galaxy Logo and that's all. I enter in the recovery mode and try to do a wipe data\factory reset but the result is the same. I have an error it sound like this: rfs for at failed on /dev/stl13 and /dev/stl14. What can i do ? I am a beginner at Android and i don't know very more. Please help me, step by step, to do something whith my phone, and fix it. Thank you everybody.
Click to expand...
Click to collapse
reflash a the rom via Odin. then wipe data and cache via recovery.
should work. seems that your system partition and data is corrupted.
where did you see the error logcat...?
Dark Passenger said:
reflash a the rom via Odin. then wipe data and cache via recovery.
should work. seems that your system partition and data is corrupted.
where did you see the error logcat...?
Click to expand...
Click to collapse
When i enter into the Recovery mode and try to do wipe.
danyhhh said:
When i enter into the Recovery mode and try to do wipe.
Click to expand...
Click to collapse
try to flash 4 files(modem,code,csc,apboot) through odin,not one package file,,
taran181 said:
try to flash 4 files(modem,code,csc,apboot) through odin,not one package file,,
Click to expand...
Click to collapse
I try to flash all that 4 files and doesen't work.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
And stop. Any ideas ?
danyhhh said:
I try to flash all that 4 files and doesen't work.
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
And stop. Any ideas ?
Click to expand...
Click to collapse
did u place the files at correct place..??see this tutorial to flash four files and flash below firmware http://androidflip.com/how-to-flash-install-firmware-samsung-galaxy-mini-s5570/
http://hotfile.com/dl/145759054/6b0ffaf/S5570DDKA7_ODDKA7_DDKA7.zip.html
try this firmware if still nothing happens than i have no idea,,
hey guys so i was trying to flash my soft bricked galaxy mini with the official stock gingerbread rom
and here's what i did
1)the OPS file is TASS_v1.0
2)downloaded the rom and odin
3)i ticked the "one package"
4)located the md5 file
and i put the phone in downloading mode and connected it to my pc and odin detected it
and then i pressed start the following happened:
"Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> e - usb is disconnected!!
<1> thread will be terminated.
<0> Destroy instant..
<0> Killed timer
<1> Disconnected!!!"
and i didnt use a samsung usb cable, i used a nokia [symbian] cable so did this happen cuz the cable didnt fit perfectly??
or any other reason?? please guys help im in a huge trouble because my phone is "soft bricked"!!
AW: [Q] e-usb disconnected!
I think normally all usb cables should be equal but u could try some noname cable, maybe helps.
Hello,
I want to download ClockWorkMod recovery, and Odin won't download it.
My steps:
1.Stop Kies
2.Open up Odin
3.Turn off the device and put on Download Mode
4.Connect USB
5.Set up Files (tass v1.0.ops and one-package cwm.tar)
Odin write:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
and stuck. Please Help...
EDIT: Hey! I have solved my problem! I don't run the correct OPS file.
But now, when I want to backup my phone, it write alot of errors such as: 'Can't open /system, Can't mount cache...'
You can't backup stock ROM, don't bother yourself.
Sent from my GT-S5570 using xda premium
Thank you for reply!
I google it alot, and not found...
Then any apps, ADB commands that can do?
tomi456 said:
Thank you for reply!
I google it alot, and not found...
Then any apps, ADB commands that can do?
Click to expand...
Click to collapse
Titanium backup is the only thing as far as I know.