Database Develop

i bricked my s5570

Hey!
need help to unbrick my galaxy mini using rom manager,
i tried the technic http://forum.xda-developers.com/showthread.php?t=1120880
but this not work at all;
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection... odin stop like this !!!

dude...at that point remove ur battery and then again insert it and try to use the three button combo again. Don't stop odin when it is not functioning. Try it and tell us.

there is no ways to unbrick your phone. because your bootloader replaced by wrong CPU model. Use JTAG and repair bootloader or go to service and .... (if you lucky)

buy a new phone :d

ben002 said:
Hey!
need help to unbrick my galaxy mini using rom manager,
i tried the technic http://forum.xda-developers.com/showthread.php?t=1120880
but this not work at all;
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection... odin stop like this !!!
Click to expand...
Click to collapse
Can you power up your phone or it is just a black screen when you try it to turn on?
tell me what do you see on your screen when you power up your phone.
I think that i had a similar problem.

rom manager sucks.

ben002 said:
Hey!
need help to unbrick my galaxy mini using rom manager,
i tried the technic http://forum.xda-developers.com/showthread.php?t=1120880
but this not work at all;
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection... odin stop like this !!!
Click to expand...
Click to collapse
you can try soft unbrick..
it works for me..

[Q] Problems installing CWR to Samsung Galaxy Mini

I rooted my phone successful few days ago by this guide. Now I want Custom ROM so I need to install Clockworkmod Recorvery before I can install Custom ROM. I tried to install CWM by this guide but I got problems. When I push Start in Odin it starts...:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification. ...but freezes there.
Any ideas? I tried other USB port and other USB cable but no help. I can't try on other PC because I have only one PC. My main computer is Mac and Odin won't run on Mac.

finAndroid said:
I rooted my phone successful few days ago by this guide. Now I want Custom ROM so I need to install Clockworkmod Recorvery before I can install Custom ROM. I tried to install CWM by this guide but I got problems. When I push Start in Odin it starts...:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification. ...but freezes there.
Any ideas? I tried other USB port and other USB cable but no help. I can't try on other PC because I have only one PC. My main computer is Mac and Odin won't run on Mac.
Click to expand...
Click to collapse
flash it by stock recovery... can you?

flash this cwm using stock recovery.

Hey finAndroid, can your phone still detected by Odin
if YES : flash a stock firmware and use stock recovery to flash above sph21 's CWM
if NO : you got a big problem, because bootloader has been wrongly written. In this case, you need professional service to fix

i just flash my mini to have a CWM recovery, but im confuse if i did it correct
i followed the step by step, odin says PASS, and my phone reboot, but my apps aren't, deleted..
when i watched on youtube... flashing galaxy S to havwe CWM, it deleted all his apps... CONFUSED

Use only Odin 4.38, I once tried 4.4x and it just didn't work.

aallialyssa said:
i just flash my mini to have a CWM recovery, but im confuse if i did it correct
i followed the step by step, odin says PASS, and my phone reboot, but my apps aren't, deleted..
when i watched on youtube... flashing galaxy S to havwe CWM, it deleted all his apps... CONFUSED
Click to expand...
Click to collapse
no data will not be wiped after flashing cwm

[Q] [I9001] Sotck Rom & Odin unknown file error

Hi,
I'm trying to install 2.3.6 stock rom in my Galaxy S Plus but Odin always gives me same error.
This is Odin info message trace:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> e - unknown file - "adsp.mbn"
<1> e - unknown file - ""
<1> set download environment.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
In a few seconds since process start Odin says e - unkown file - "adsp.mbn" error and device restarts with no changes.
I've tested with these three roms and no luck:
- I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5
- I9001XXKQ1_I9001XXKPI_I9001DBTKP1_HOME.tar.md5
- I9001XXKPU_I9001XXKPH_I9001DBTKP1_HOME.tar.md5
I'm from Spain and my device has Orange 2.3.4 firmware.
I don't know if this could be important
Any idea?
Is there any pre-requisite to flash a stock rom, like phone must be rooted or something?
Thanks for your help.
Regards

Try to re-download odin 4.43, AriesVe.ops, ROM (least probable as you tried a few roms already).
Check step-by-step that you're following guide from here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Flashing
Is there any pre-requisite to flash a stock rom, like phone must be rooted or something?
Click to expand...
Click to collapse
No, you just have to get the phone into download mode.

Thanks a lot bro!
Now i successfully updated my phone.
I think i was using an incorrect *.ops file.
Regards,
Juan

[Q] I9001 Problem

Hello,
I have problem with flashimg one I9001 with stock rom I9001XXKQ7_I9001DBTKP2_DBT from Sammobile.
I downloaded the Odin Multi_Downloader_v4.43_with_smd0425 + I9001_AriesVE.ops
I put I9001 to download mode, close all Kies proceses and setup Odin: [x]one package [x]auto reboot [x]protect ops [x]reset time 300
And now It's stuck on setup connection ... I gived up after 30 min ...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
What I do wrong?
Now the pfone boot to 'phone and computer with an explanation mark triangle inbetween symbol'.
Can someone help me to solve this issue?

Okay its not a problem its more of a bug.
What you need to do:
- Remove phone (YOU'LL SEE FAIL!! DO NOT FREAK OUT!)
- Close odin
- Open odin (as admin for 7 and vista) and add files
- Remove battery for 30 sec and reboot in download. Also remove sim and sdcard
- Connect phone. Use original cable and plug it directly on the motherboard of your pc
- Start
When it gets stuck again.. Just try agian, or flash broodrom and then stock. It repaired my phone some weeks ago

Thank you
First try [with stock rom]:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> e - usb is disconnected!!
<1> thread will be terminated.
<0> Destroy instant..
<0> Killed timer
Second time [Broodrom]:
Yes this works! I'm so happy that my BF phone is working again :highfive:
Many thanks Mrjraider! :victory:

Mobile doesn't react at all, but Download-Modus works.

Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik

Dematik said:
Hey, I really need your help.
Today I tried to install new Custom ROM (MIU or something).
I installed it normaly and rebooted. I didn't watch what the mobile is doing in that moments and when I took a look at it it was turned off.
The problem now is that it doesn't react at all.
I managed to put it in the download modus. Pressing the buttons and turn in the battery then. It connects via USB but it does show nothing on the display.
The next step then was to flash it completely new with ODIN.
But ODIN just stops at setup connection:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Once I got the error messages:
<1> --- cannot open the usb serial port. code: 87
and
<1> --- cannot open the usb serial port. code: 2
Can you please please help me get it going!!!
Greetings,
Your Dematik
Click to expand...
Click to collapse
Hi Dematik!
You can read about similar issues here (unsolved)
or here or this or this
It looks bad, but...
Good luck anyway.

Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.

Dematik said:
Hey, thanks for your effort.
I think I pressed Volume UP + Home + Power. This is the RAMdump Mode isn't it?
If I'm correct it isn't useful to recover my mobile?
Thank again.
Click to expand...
Click to collapse
Hello Dematik!
You enter in recovery mode when you press just 2 buttons: Home + Power.
You're welcome.
Good luck.

Well I'd suggest you to try the "POWER + HOME + VOLUME DOWN" combo instead of the one you tried, because they are different. If a yellow "downloading..." appears in the middle of a black screen you are in the right downloading mode that should work with odin, just talking from my experiences

Or If you can open CWM, then just flash another Rom if not Odin is your last choice

If you are getting an error of cannot connect to the serial port, reinstall the drivers and flash via Odin.
Press that damn thanks button even if I didn't help you. I just love to earn more of them