Hello,
I have problem with flashimg one I9001 with stock rom I9001XXKQ7_I9001DBTKP2_DBT from Sammobile.
I downloaded the Odin Multi_Downloader_v4.43_with_smd0425 + I9001_AriesVE.ops
I put I9001 to download mode, close all Kies proceses and setup Odin: [x]one package [x]auto reboot [x]protect ops [x]reset time 300
And now It's stuck on setup connection ... I gived up after 30 min ...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
What I do wrong?
Now the pfone boot to 'phone and computer with an explanation mark triangle inbetween symbol'.
Can someone help me to solve this issue?
Okay its not a problem its more of a bug.
What you need to do:
- Remove phone (YOU'LL SEE FAIL!! DO NOT FREAK OUT!)
- Close odin
- Open odin (as admin for 7 and vista) and add files
- Remove battery for 30 sec and reboot in download. Also remove sim and sdcard
- Connect phone. Use original cable and plug it directly on the motherboard of your pc
- Start
When it gets stuck again.. Just try agian, or flash broodrom and then stock. It repaired my phone some weeks ago
Thank you
First try [with stock rom]:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> e - usb is disconnected!!
<1> thread will be terminated.
<0> Destroy instant..
<0> Killed timer
Second time [Broodrom]:
Yes this works! I'm so happy that my BF phone is working again :highfive:
Many thanks Mrjraider! :victory:
Related
Hi guys!
I've got a stock samsung i9001 with root.
when i attempted to flash feamod 1.2 via odin it stopped to
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
after 6 minutes i disconnected di USB and odin adds in the log:
Code:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
the phone is ok but what is the problem? i followed the guide in this section
have you try to flash again? maybe try with Odin v1.3
gr Maurice
no i don't try again.... but odin3 1.3 is older then Odin 4.43, isn't it?
Romba91 said:
no i don't try again.... but odin3 1.3 is older then Odin 4.43, isn't it?
Click to expand...
Click to collapse
Thats treubut maybe odin 3 does work. Try first to flash it again.
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
Your phone issent bricked,i had the same issue.
What worked for me is installing the Broodrom.
Here is the link : http://forum.xda-developers.com/showthread.php?t=1396837
Everything you need is posted by Broodplank in his first post.
Once you installed it, you can go back to any rom you would like, altough de Broodrom is a very good rom!!
If you have cwm installed, try to format your partitions first?
Hope this will help you in some way,
How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...
darristan said:
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
I have the samme issue as you. (((
Have you found a way to solve it? :[
darristan said:
Have you found a way to solve it? :[
Click to expand...
Click to collapse
If your asking me, No, not yet ((
darristan said:
How can I flash BroodROM if I couldn't go to CWM at all, I don't see if there is odin flashable package...
Click to expand...
Click to collapse
Look better, BroodRom can be installed with Odin.
http://sourceforge.net/projects/broodrom/files/broodROM_RC5.rar/download
Follow the instructions in Cybertek's post.
I hope I was useful.
My SGS Plus shows me a faulty triangle logo when I boot up normally or Recovery, but I am able to go Download mode.
I tried to flash an official firmware to restore the phone but got stucked in the first step forever.
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I searched all among the internet, and tried:
a) Removing the .MD5 extension from firmware zip.
b) Use a Windows XP PC
c) Try another USB port
d) Untick Protect OPS from Odin
e) Use an older version of Odin
f) Kies, LOL
Which never worked...
Click to expand...
Click to collapse
hi. did you fix that because i have the same problem and i'm looking for help please
hac12 said:
hi. did you fix that because i have the same problem and i'm looking for help please
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1802098
xsenman said:
try this http://forum.xda-developers.com/showthread.php?t=1802098
Click to expand...
Click to collapse
thanks for the help but it still dosen't work. i treid:broodROM_RC5_Extras_Only and/GT-I9001_XEO_I9001XXKPU_I9001XXKPH_I9001OXAKP1
and it didn't boot. after i treid to flash via odin FeaModRecovery_1.2.tar and it stuck on samsung logo. i'm asking if you can link me a good rom so i can flash it i have 9001 gsmh thanks in advance
I think that I brick my GalaxyMIni...
My Rom is Gingerbread 2.3.4.
When I install CWM Odin says:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
But i reboot (VOL up + center key + power key) my boot say:
#########################
# #
# RAMDUP Mode #
# (ARM9 mode) #
#########################
HELP... PLEASE!!!
Vicente said:
I think that I brick my GalaxyMIni...
My Rom is Gingerbread 2.3.4.
When I install CWM Odin says:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> recovery.img download..
<1> 1/1 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
But i reboot (VOL up + center key + power key) my boot say:
#########################
# #
# RAMDUP Mode #
# (ARM9 mode) #
#########################
HELP... PLEASE!!!
Click to expand...
Click to collapse
No you don't, if you want enter recovery press : center key+power key
if you want do normal boot just press power key !
F4uzan said:
No you don't, if you want enter recovery press : center key+power key
if you want do normal boot just press power key !
Click to expand...
Click to collapse
Ok, Thank You very much, I was Desperado........
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
use the ops file which is called TASS.ops
and Odin multi downloader provided with the guides for flashing galaxy mini (nothing other)
carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
You must use Odin V4.38, not other version..
dheeraj (dhlalit11) said:
use the ops file which is called TASS.ops
and Odin multi downloader provided with the guides for flashing galaxy mini (nothing other)
Click to expand...
Click to collapse
Thanks a lot :good::good: it helps to solve the same problem on my gio 5660. my phone bricked and i couldnt boot it, i choosed TASS_v1.0.ops in odin 4,42 ops field and the gio package S5660XXKTI_S5660SERKS1_S5660XXKT6_HOME.tar.md5 in one package field. after that i repeat the same procedure with GIO_v1.0.ops, and now my phone works fine :good:
---------- Post added at 09:33 PM ---------- Previous post was at 09:22 PM ----------
carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
Press volume "-" + home button+ power button and go to download mode, choose TASS_v1.0.ops in odin 4.42 ops field, and S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 in one package field, connect phone and press start, after everything is done again go to download mode, restart odin, and in ops field choose GIO_v1.0.ops, and in one package field choose gt-s5660-cwm-recovery-20111007-1.tar.md5 file.
It helps me hope it will help you too,
I got that problem before. The problem is that you used the wrong Odin version. Look at ur Odin version very carefully
sent from a slurpee machine.
just change the ops name to cooper_v1.0 and try again...it should be solved
Same problem using Odin V4.38
carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
A bit confused, seams to be different way to do this when I look at the answers here.
I'm using Odin V4.38 and TASS_v1.0 can't find the S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 pac.
So I have used the 4 files that I get when I decompress my downloads, Have tried with files dated 2012-03-24 and 2011-11-30.
Basically the same result I think it was 2012 version that gave some other output then mibib download, but it stopped at the same place.
Would bee really grateful if someone could post links to a fully working set of Odin and md5 files :fingers-crossed:
Happy if you have a easy way to do this, first time I have run in to trouble with a Android device
good solution
Hopar said:
Thanks a lot :good::good: it helps to solve the same problem on my gio 5660. my phone bricked and i couldnt boot it, i choosed TASS_v1.0.ops in odin 4,42 ops field and the gio package S5660XXKTI_S5660SERKS1_S5660XXKT6_HOME.tar.md5 in one package field. after that i repeat the same procedure with GIO_v1.0.ops, and now my phone works fine :good:
---------- Post added at 09:33 PM ---------- Previous post was at 09:22 PM ----------
Press volume "-" + home button+ power button and go to download mode, choose TASS_v1.0.ops in odin 4.42 ops field, and S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 in one package field, connect phone and press start, after everything is done again go to download mode, restart odin, and in ops field choose GIO_v1.0.ops, and in one package field choose gt-s5660-cwm-recovery-20111007-1.tar.md5 file.
It helps me hope it will help you too,
Click to expand...
Click to collapse
Thanks bro :good: You made my day
I am trying to flash my Ace through Odin v4.42, got the S5830_Cooper_v1.0.ops file selected, One Package, Protect Ops, Auto Reboot and Reset time. Selecting the S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 in One Package Option but Odin outputs:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
I'm staring at the screen waiting for it to finish but it's already 15min. Should I disconnect the cable?
Edit: Sorry. Solved. Solved it by renaming the S5830_cooper_v1.0.ops to COOPER_v1.0.ops