Database Develop

[Q] problem during flashing feamod 1.2 via ODIN 4.43

Hi guys!
I've got a stock samsung i9001 with root.
when i attempted to flash feamod 1.2 via odin it stopped to
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
after 6 minutes i disconnected di USB and odin adds in the log:
Code:
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
the phone is ok but what is the problem? i followed the guide in this section

have you try to flash again? maybe try with Odin v1.3
gr Maurice

no i don't try again.... but odin3 1.3 is older then Odin 4.43, isn't it?

Romba91 said:
no i don't try again.... but odin3 1.3 is older then Odin 4.43, isn't it?
Click to expand...
Click to collapse
Thats treubut maybe odin 3 does work. Try first to flash it again.

problem with odim

i have tried to flash a stock rom(2.3.6) in my SGM.
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
Phone:
samsung_bml_format FAIL : 90220000
OWN UPDATE FAIL
and that's it.
its stuck.
i have manged to make him turn on by flashing CWM.
But somehow i fu**** it up again.
When i turn the phone on,its stuck on boot loop.
please help.
i dont think that my dad will pay on anothe repair.

Did you use a correct rom ?
And, if the one you used isn't one package,
Did you put it in right order ?
I'm just a noob,
So, CMIIW

I did everything like the guide said.

efid845 said:
i have tried to flash a stock rom(2.3.6) in my SGM.
ODIN:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
Phone:
samsung_bml_format FAIL : 90220000
OWN UPDATE FAIL
and that's it.
its stuck.
i have manged to make him turn on by flashing CWM.
But somehow i fu**** it up again.
When i turn the phone on,its stuck on boot loop.
please help.
i dont think that my dad will pay on anothe repair.
Click to expand...
Click to collapse
search for any Odin one click package for gingerbread and just flash it you just need to connect your device on download and click on start in Odin one click you will get your device running
---------- Post added at 02:25 PM ---------- Previous post was at 02:12 PM ----------
sorry for the post above I was thinking that I was reading captivate forum here try this guide:- http://androidadvices.com/samsung-galaxy-mini-s5570-steps-install-gingerbread-236-jvkt1-firmware/

ODIN stuck at Mibib while flashing to gingerbread

please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this

use the ops file which is called TASS.ops
and Odin multi downloader provided with the guides for flashing galaxy mini (nothing other)

carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
You must use Odin V4.38, not other version..

dheeraj (dhlalit11) said:
use the ops file which is called TASS.ops
and Odin multi downloader provided with the guides for flashing galaxy mini (nothing other)
Click to expand...
Click to collapse
Thanks a lot :good::good: it helps to solve the same problem on my gio 5660. my phone bricked and i couldnt boot it, i choosed TASS_v1.0.ops in odin 4,42 ops field and the gio package S5660XXKTI_S5660SERKS1_S5660XXKT6_HOME.tar.md5 in one package field. after that i repeat the same procedure with GIO_v1.0.ops, and now my phone works fine :good:
---------- Post added at 09:33 PM ---------- Previous post was at 09:22 PM ----------
carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
Press volume "-" + home button+ power button and go to download mode, choose TASS_v1.0.ops in odin 4.42 ops field, and S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 in one package field, connect phone and press start, after everything is done again go to download mode, restart odin, and in ops field choose GIO_v1.0.ops, and in one package field choose gt-s5660-cwm-recovery-20111007-1.tar.md5 file.
It helps me hope it will help you too,

I got that problem before. The problem is that you used the wrong Odin version. Look at ur Odin version very carefully
sent from a slurpee machine.

just change the ops name to cooper_v1.0 and try again...it should be solved

Same problem using Odin V4.38
carbonbadu said:
please guys help me fix this issue
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
the phone is not starting i am very frustrated by this
Click to expand...
Click to collapse
A bit confused, seams to be different way to do this when I look at the answers here.
I'm using Odin V4.38 and TASS_v1.0 can't find the S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 pac.
So I have used the 4 files that I get when I decompress my downloads, Have tried with files dated 2012-03-24 and 2011-11-30.
Basically the same result I think it was 2012 version that gave some other output then mibib download, but it stopped at the same place.
Would bee really grateful if someone could post links to a fully working set of Odin and md5 files :fingers-crossed:
Happy if you have a easy way to do this, first time I have run in to trouble with a Android device

good solution

Hopar said:
Thanks a lot :good::good: it helps to solve the same problem on my gio 5660. my phone bricked and i couldnt boot it, i choosed TASS_v1.0.ops in odin 4,42 ops field and the gio package S5660XXKTI_S5660SERKS1_S5660XXKT6_HOME.tar.md5 in one package field. after that i repeat the same procedure with GIO_v1.0.ops, and now my phone works fine :good:
---------- Post added at 09:33 PM ---------- Previous post was at 09:22 PM ----------
Press volume "-" + home button+ power button and go to download mode, choose TASS_v1.0.ops in odin 4.42 ops field, and S5660XXKTL_S5660XXKT7_S5660DBTKT1_HOME.tar.md5 in one package field, connect phone and press start, after everything is done again go to download mode, restart odin, and in ops field choose GIO_v1.0.ops, and in one package field choose gt-s5660-cwm-recovery-20111007-1.tar.md5 file.
It helps me hope it will help you too,
Click to expand...
Click to collapse
Thanks bro :good: You made my day

[Q] I9001 Problem

Hello,
I have problem with flashimg one I9001 with stock rom I9001XXKQ7_I9001DBTKP2_DBT from Sammobile.
I downloaded the Odin Multi_Downloader_v4.43_with_smd0425 + I9001_AriesVE.ops
I put I9001 to download mode, close all Kies proceses and setup Odin: [x]one package [x]auto reboot [x]protect ops [x]reset time 300
And now It's stuck on setup connection ... I gived up after 30 min ...
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
What I do wrong?
Now the pfone boot to 'phone and computer with an explanation mark triangle inbetween symbol'.
Can someone help me to solve this issue?

Okay its not a problem its more of a bug.
What you need to do:
- Remove phone (YOU'LL SEE FAIL!! DO NOT FREAK OUT!)
- Close odin
- Open odin (as admin for 7 and vista) and add files
- Remove battery for 30 sec and reboot in download. Also remove sim and sdcard
- Connect phone. Use original cable and plug it directly on the motherboard of your pc
- Start
When it gets stuck again.. Just try agian, or flash broodrom and then stock. It repaired my phone some weeks ago

Thank you
First try [with stock rom]:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
<1> e - usb is disconnected!!
<1> thread will be terminated.
<0> Destroy instant..
<0> Killed timer
Second time [Broodrom]:
Yes this works! I'm so happy that my BF phone is working again :highfive:
Many thanks Mrjraider! :victory:

Stuck on Odin Flashing.

I am trying to flash my Ace through Odin v4.42, got the S5830_Cooper_v1.0.ops file selected, One Package, Protect Ops, Auto Reboot and Reset time. Selecting the S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 in One Package Option but Odin outputs:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
I'm staring at the screen waiting for it to finish but it's already 15min. Should I disconnect the cable?
Edit: Sorry. Solved. Solved it by renaming the S5830_cooper_v1.0.ops to COOPER_v1.0.ops