Database Develop

Camera not working

Hi, i've got a litte problem.
After flashing my Milestone my camera is not working. I've got a screen but when i am pressing button then my phone got a black screen and I have to remove battery. I don't have this problem with FroYo G.O.T., only with Mods and roms from Brazil. Can anyone help me with my problem?
sorry for my english

ovitz said:
Hi, i've got a litte problem.
After flashing my Milestone my camera is not working. I've got a screen but when i am pressing button then my phone got a black screen and I have to remove battery. I don't have this problem with FroYo G.O.T., only with Mods and roms from Brazil. Can anyone help me with my problem?
sorry for my english
Click to expand...
Click to collapse
Same problem, with camera screen bluring... I've read that it's regard to the kernel, but I've made a rollback to 2.1, and still with problems, any idea?

Ovitz, it would probably be of massive help if you said what ROM you've flashed...

I have Iceandfire CM7, i can't make a movie but i cant make a photo. My camera is fully working with Froyo G.O.T. and stock 2.1

If you go to the CM7 site it says in the list of bugs using the side button for the camera "unleashes hell" I suggest you have a read through the rest of the bug list
Sent from my I9000m using XDA's app.

but on MIUI, Iceandfire, CM 6 and7, Cronos and others I can't take a picture...

ovitz said:
but on MIUI, Iceandfire, CM 6 and7, Cronos and others I can't take a picture...
Click to expand...
Click to collapse
My camera can take picture on these ROM but can not play video . Can anyone play video on Ginger cook ROMs?

Good stock ROM 2.3.4

hi
for those like me who have tried the official Stock rom and have the screen lag and want a good fully functioning 2.3.4 GB official ROM u can take it from the below link
i got mine udated via the spice service center in india bangalore and i was having the screen lag problem and the battery too was draining fast
then i tried this one and every thing is working fine as i like it and the battery also seems to be much better
if u want it take it from the below link and enjoy
link for the same : http://www.mediafire.com/?28bhxqedlru2ii1 - it is - FB0-318D-0-512-A03
take both 318D & india off GB 318E here link : Sorry this link gone as my sugarsync is permanently deactivated
can ay one give me one more link ill add it here
Latest version is 1.8.2 download at http://www.mediafire.com/?cugomknzg3svfhf - Thanks c_anuraag
it has been renamed as firmware.nb0,if not extract to ur pc rename it place it on the root of ur SD flash it via official recovery Only
You cant use CWM for this
HOW TO FLASH THE ROM
* Extract the ZIP file.
* Copy the file FB0-318D-0-5019-A03.nb0 to ur PC and rename it to firmware.nb0
* Copy the firmware.nb0 to the root of ur SD
* To enter bootloader mode, press and hold volume up + down + power buttons until you see the image of the Android
logo.
* Press 'Home' key to show the update utility. Use the volume buttons to select the option "Download nb0 from SD card".
* Press 'back arrow' to confirm.
Upgrade will start. You can see the progress of the update while you wait. Your Phone is now updated to its latest software.

Pay close attention
haree said:
i dont think u can use CWM for this
Click to expand...
Click to collapse
yeah this should only be used if you have this specific device with this being said MOD: mikey I need you to get me a "bible" setup so people dont flash their phones to cdma from gsm and vice versa
.nb0 only use them if you have that exact model and service provider
.zip im working on getting these set up so we can run 2.2 or 2.3.4 whenever we want
just need a little help and someone else has cm7 building for the moto triumph which is the same hardware except the radio

snakebitezz said:
yeah this should only be used if you have this specific device with this being said MOD: mikey I need you to get me a "bible" setup so people dont flash their phones to cdma from gsm and vice versa
.nb0 only use them if you have that exact model and service provider
.zip im working on getting these set up so we can run 2.2 or 2.3.4 whenever we want
just need a little help and someone else has cm7 building for the moto triumph which is the same hardware except the radio
Click to expand...
Click to collapse
prof tj_style working on that (cm7 for this phone) soon it will be released the main problem faced is the fm issue,....

haree said:
hi
for those like me who have tried the official Stock rom and have the screen lag and want a good fully functioning 2.3.4 GB official ROM u can take it from the below link
i got mine udated via the spice service center in india bangalore and i was having the screen lag problem and the battery too was draining fast
then i tried this one and every thing is working fine as i like it and the battery also seems to be much better
if u want it take it from the below link and enjoy
Link : http://dl.dropbox.com/u/10031257/Mi410/Mi410GB13D.rar it is - FB0-318D-0-512-A03
Link 2 this one is India update which u can get done from the service center : http://dl.dropbox.com/u/10031257/Mi410
/OffupdateGB.rar
recent welcome ROM : https://www.sugarsync.com/share/ddhcyiw66cyqt
it has been renamed as firmware.nb0 so u can just flash it via ur official recovery
i dont think u can use CWM for this
Click to expand...
Click to collapse
In the very first link you provided, the camera JUST doesn't work. Any tips?

frankmehta said:
In the very first link you provided, the camera JUST doesn't work. Any tips?
Click to expand...
Click to collapse
just factury reast your phone then it should work. working for me
Sent from my CSL-MI410 using xda premium

yashwantsingh said:
just factury reast your phone then it should work. working for me
Sent from my CSL-MI410 using xda premium
Click to expand...
Click to collapse
hi
yes ur right thats exactly what needs to be done it also worked for me

Didn't work for me. Now on Cherry Magnum HD Update 3. Smooth and very responsive. Everything works!

Stay off from CSL Spice 2.3.4 FB0-318D-0-5012-A03
I own a spice Mi-410. The A03 update seems to have greatly improved battery life (just over 3 days with limited calls, occasional fruit ninja, and data always on in 2G mode)
I started suffering from wake up lag issues on the official spice Gingerbread update FB0-318D-0-5012-A03 all of a sudden. An additional problem is that bluetooth support is very limited to receiving files on the stock Spice GB rom.
Since I had a good experience with the stock Cherry Magnum GB ROM A01 version (except for the lower battery life), I tried the more recent version (update 3) which is also an A03 release. I feel this is the best stock GB ROM currently for the Spice Mi-410. Of course removing some unnecessary bloatware also helps. For example I really do not see the need for nero sync. Also restored back the splash image and bootup animation/sounds from the Spice ROM. Having no issues for the last few weeks.

anandjm said:
I own a spice Mi-410. The A03 update seems to have greatly improved battery life (just over 3 days with limited calls, occasional fruit ninja, and data always on in 2G mode)
I started suffering from wake up lag issues on the official spice Gingerbread update FB0-318D-0-5012-A03 all of a sudden. An additional problem is that bluetooth support is very limited to receiving files on the stock Spice GB rom.
Since I had a good experience with the stock Cherry Magnum GB ROM A01 version (except for the lower battery life), I tried the more recent version (update 3) which is also an A03 release. I feel this is the best stock GB ROM currently for the Spice Mi-410. Of course removing some unnecessary bloatware also helps. For example I really do not see the need for nero sync. Also restored back the splash image and bootup animation/sounds from the Spice ROM. Having no issues for the last few weeks.
Click to expand...
Click to collapse
hi
ur statements are quite confusing 318B is the official India update and this has the screen lag
now are u saying that 318D as given in this thread is good or bad
i feel it is ok and better after rooting and removing the bloatware im getting a decent battery life

It can upgrade spice mi 270 to android 2.3.4
Sent from my Spice Mi-270 using xda premium

[email protected] said:
It can upgrade spice mi 270 to android 2.3.4
Sent from my Spice Mi-270 using xda premium
Click to expand...
Click to collapse
hi
assuming u are asking if u can use this for Mi270 no this is only for the Mi 410
u can ask at the service center or may be Google the same for ur phone
dont use this it will brick ur phone

Hello
u know how to install clockworkmod on spice mi 270.
Sent from my Spice Mi-270 using xda premium

WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)

ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse
hi
but when i tried to install this via stock recovery it did not work any reason why
and yes i did rename the file to firmware.nb0

haree said:
hi
but when i tried to install this via stock recovery it did not work any reason why
and yes i did rename the file to firmware.nb0
Click to expand...
Click to collapse
IIRC I used SUT to flash that ROM

Sorry for the confusing statements. The A03 update is pretty good, but I had three issues with it.
1. Limited bluetooth support (try sending files from your phone with bluetooth). Have to use a third party app to deal with this problem.
2. GPS is quite poor. Takes a long time to get a lock.
3. Camera color balance does not work well.
4. Missing Android Gingerbread keyboard. In my opinion touchpal keyboard though better than the Froyo keyboard is not as good as the GB keyboard.
The A01 update which I tried caused issues with the wakeup lag but atleast had a working GPS and proper color balance.
For the reasons listed above I prefer the Cherry MagnumHD FB0-318D-0-5019-A03 ROM to the Spice FB0-318D-0-5012-A03 ROM.
haree said:
hi
ur statements are quite confusing 318B is the official India update and this has the screen lag
now are u saying that 318D as given in this thread is good or bad
i feel it is ok and better after rooting and removing the bloatware im getting a decent battery life
Click to expand...
Click to collapse
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
Not sure what you mean by weak GPS signal and touch screen axis inversion. I get a GPS lock (outdoors) within 30s most of the time and within 60s all the time, with AGPS.
ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse

yeah, with A-GPS it sure is very fast... it is supposed to
I was talking about the vanilla offline GPS, slow & painful as hell 99% of the time

The vanilla offline GPS can take as much as 10-15minutes before it gets a GPS lock and this I mean outdoors. This is especially true if the GPS is offline for sometime as it has to download the ephemeris data again. For more information you can read http://en.wikipedia.org/wiki/GPS_signals.
Since Ideos X6 variants all use the Quacomm Snapdragon 8255 SoC there should be no difference in the performance of the system compared to say the HTC Desire HD or Desire-S. Any issues (and I have not found any GPS issues with the Desire-S which I tested for two weeks and neither found any with the Spice Mi-410) is likely to be firmware related. I did have GPS issues with the Spice Mi-410 GB A03 firmware which was very stable otherwise.
So likely a firmware issue.
You can also try the GPS Test app from the android market https://market.android.com/details?id=com.chartcross.gpstest&hl=en
ashy said:
yeah, with A-GPS it sure is very fast... it is supposed to
I was talking about the vanilla offline GPS, slow & painful as hell 99% of the time
Click to expand...
Click to collapse

sucessfully flashed welcome A99 today
ashy said:
WellcoM A99's Gingerbread ROM is the most stable one (latest also) available, it's based on 3.18E build
ZERO software bug I've found so far... (assuming touch screen axis inversion & weak GPS signal are hardware problems)
Click to expand...
Click to collapse
hi
today i flashed this Rom but did not use the SUTL
i changed the extension to firmware.nb0 and flashed it via stock recovery
and it was sucessfull this one seems to be good it does not seem to have any bloteware i also rooted and will try a few days and keep u posted on the same
@ ashy
thanks for this info
all i want is a good 2.3.4 with good battery and no screen crazy problem lets hope this one is it

MI410 Cancer with CHerry A03
Hi,
I have upgraded to Cherry Magnum HD A01, and it was all fine.
Upgraded to A03 (update 3), Battery Life has increased, and Touch felt as good, all was great till last week. Thats when issues started.
Problems:
1) Very slow response on trying to unlock screen
2) Very slow performance
3) Lag in ringtone (As if there are scratches while running a CD)
4) Call answers after 5 seconds
5) ....... Overall runs as if its struggling to survive with Cancer.
I Tried:
1) Cleared Cache (Helped for an hour)
2) Factory Rest (Helped for a day)
3) Reinstalled Firmware Removed Google Account running with new Google Account (Helping so far, aint sure when it start stuggling with Cancer again)
4)Tried to flash with Spice CSL A03 (dint work)
Any help in this regards will help many ambitious impatient users of MI410 like me who rushed to flash by re branding.

[Q] DISPLAY screen NOT WORKING

My lg p990 in was running in only blank screen, I connect Lg OSP and view my phone desktop in OSP , then i run my phone via Osp, its work perfect,, i will update to 2.3.4 (V20L) from 2.2.2 (v10f froyo) then problem was continue,, i cant find the solution kindly help me

directorsashi said:
My lg p990 in was running in only blank screen, I connect Lg OSP and view my phone desktop in OSP , then i run my phone via Osp, its work perfect,, i will update to 2.3.4 (V20L) from 2.2.2 (v10f froyo) then problem was continue,, i cant find the solution kindly help me
Click to expand...
Click to collapse
I think you've diagnosed the problem quite well yourself. As you say: "Your screen is not working."
So apart from prying the phone open and check for loose connections (which I would not advise) you should have it serviced/replaced.

Thanks for u r suggestion .., i try to that.., now display is working but.., phone was hanging (Freeze).. i try factory reset than problem continue.., may i thing my updating was wrong.., kindly tell me what Rom was official lg launching., i used before v10f in India.., now v10l custom Rom., kindly inform me

directorsashi said:
Thanks for u r suggestion .., i try to that.., now display is working but.., phone was hanging (Freeze).. i try factory reset than problem continue.., may i thing my updating was wrong.., kindly tell me what Rom was official lg launching., i used before v10f in India.., now v10l custom Rom., kindly inform me
Click to expand...
Click to collapse
Here is a page linking to most stock ROMs: http://forum.xda-developers.com/showthread.php?t=1035041
There's also 10e for India there. Try to flash the latest for Europe (V20L), and if it doesn't work you can go back to 10e.

Thank u dear

i try to update to Cyanogen Mod 7.1.., kindly suggest me its fine or not????????

CM7.1 is a fine ROM. Download the latest version from here http://download.cyanogenmod.com/?device=p990, there are some known problems with the official 7.1 release.

how to fix the issues

i install cm7 in u r way but still screen was freeze & stuck i cant run probably >>>>>>>>>>>> what to do

screen not working again
dear,
i install v20l eur version via smart flash its working fine in past more then 15 days, but now still same problem came on phone working perfectly, but screen was only black.., still i remove the screen carbon strip and again insert but screen not working.., i cant understand what's problem that, its software or hardware problem

Can you see lg logo when booting or recovery menu? If yes then i think its not hw fault.
Sent from my Optimus 2X using xda premium

no... i cant see the lg logos .. display back led light only blinking ., and then touch was work then i connect the LG OSP,, phone was working perfect but screen not displaying..,

So its hw related.
Sent from my Optimus 2X using xda premium

hw problem means ( lcd display was problem or mother board????)

I would guess its lcd flex cable.
Sent from my Optimus 2X using xda premium

N7000B Help! (BLACK WITH COLOUR PIXELS)

Hello, all! I need some help please.
I just brought my galaxy note from thailand and it's name is
N7000B.
FIRMWARE PDA: LA2/ PHONE: KL2 CSC: KL3
I have tried google search but can't find any info on this model.
Can I flash a Normal stock N7000 with it ???
Also can't find the firmware on samfirmares.com
------------------------------------------------------
Atm: I flashed Netchips cwm it did not root my device and now when I turn on phone the screen is all black with pixelated colours. If I turn it on and swipe my finger on screen it has sound of locksreen swipe, then I turn off power button, then on again sometimes not all times the phone will turn on like normal and everythings works fine.
Does anyone know how to remove netchips kernal v2? and go back to stock?
Thanks in Advance for help!

Hi there.
I got the same problem.
Here is the rom I'm using :
DarkyRom 3.3 (http://forum.xda-developers.com/showthread.php?t=1461794)
And the kernel is that one : 2.6.35.13-franco.Kernel-2
When using the rom, at first, everything is fine. then when turning off next 10 secs, the screen is black with many colors. At first, only one (red), then a few more, and it is going on, more and more, and the screen is "lightning".
I don't know where is the problem but if someone got an idea or any help to give, that would be great ^^'

Titek said:
Hi there.
I got the same problem.
Here is the rom I'm using :
DarkyRom 3.3 (http://forum.xda-developers.com/showthread.php?t=1461794)
And the kernel is that one : 2.6.35.13-franco.Kernel-2
When using the rom, at first, everything is fine. then when turning off next 10 secs, the screen is black with many colors. At first, only one (red), then a few more, and it is going on, more and more, and the screen is "lightning".
I don't know where is the problem but if someone got an idea or any help to give, that would be great ^^'
Click to expand...
Click to collapse
yeah yeah thats it! Little specks increasing to whiteness.
Is your model N7000B or N7000?
The problem might have something to do with Kernal CWM.
What I did was flash a stock rom from samfirmwares.com but the only problem is I couldn't find the original stock (thl) rom that came with the phone.
being N7000B. FIRMWARE PDA: LA2/ PHONE: KL2 CSC: KL3
Anyhow for now with new stock it is working fine.
ps. something else I have noticed is the photos I took before I flashed the new stock rom when zooming in the pixel of the photo doesn't fix. but when I take new photos and zoom in, it is fine. figures

Same to me, the problem was solved by flashing another rom, but I wonder why it happened.
About the photos? i didn't notice, I just scared something bad could happen to the phone about the problem posted above
N.B : I got a N7000 ;=)

Hi,
I've got the same problem on my wife's phone (White GNote).
Problem not seen on mine. :/
Did you solved it ? (I'm on DarkyRom)
All other rom I've tested don't have this issue.
here is another thread with the same issue.
Edit:
SOLVED !
Flashed new kernel: AbyssNote -> OK
Also tested another version of franco.Kernel with no luck

kumy said:
Hi,
I've got the same problem on my wife's phone (White GNote).
Problem not seen on mine. :/
Did you solved it ? (I'm on DarkyRom)
All other rom I've tested don't have this issue.
here is another thread with the same issue.
Edit:
SOLVED !
Flashed new kernel: AbyssNote -> OK
Also tested another version of franco.Kernel with no luck
Click to expand...
Click to collapse
Thanks for the follow up.
Yes so far
franco and speed mod. kernels have this issue
abyss and fm kernel works
what i've read on franco's kernel is that he is trying to pin point what it is but atm v9 is still having this issue
cheers

[Q] {help} Kernel causes the screen touch unresponsive

I installed "cm10.1 t build05 newbl" by tonyp and the "kk exp 20130727 126 newbl"
i did wiping before installing.
after all of this.
my screen flashed to Welcome screen
but the screen is unable to respond my touch.
I have found out that it is whenever i install the kernel (kk exp)
can anyone help me with this?
i want to add the kernel but it shows issues like this.

Help
Help me please