[Q] Please ID this Galaxy Note for me - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I came into possession of a Samsung Galaxy Note from a relative visiting from China which my wife wanted to flash to English ROM for use in the States. However, this seem to be a model specifically designed for the Chinese market. It has PDA firmware i889FA06 and build date of Jan 6, 2012. This is NOT the i889 CDMA PDA phone, but an actual Galaxy Note with i889 firmware (not sure why?). It supports CDMA and GSM, with the following information in the about section:
Model Number: SCH-i889
Android version: 2.3.6
Baseband: i889FA06
Kernel: 2.6.35.7-CL872127 [email protected] #2
Build number: Gingerbread.FA06
Quick search of the Galaxy Note i889 lands me in all sorts of Chinese sites, but nowhere can I find any information on how to flash with a ROM made for western world.
Is this even possible? Or is the hardware different enough that only the stock ROM will work?
Any suggestions are much appreciated!

steph280 said:
I came into possession of a Samsung Galaxy Note from a relative visiting from China which my wife wanted to flash to English ROM for use in the States. However, this seem to be a model specifically designed for the Chinese market. It has PDA firmware i889FA06 and build date of Jan 6, 2012. This is NOT the i889 CDMA PDA phone, but an actual Galaxy Note with i889 firmware (not sure why?). It supports CDMA and GSM, with the following information in the about section:
Model Number: SCH-i889
Android version: 2.3.6
Baseband: i889FA06
Kernel: 2.6.35.7-CL872127 [email protected] #2
Build number: Gingerbread.FA06
Quick search of the Galaxy Note i889 lands me in all sorts of Chinese sites, but nowhere can I find any information on how to flash with a ROM made for western world.
Is this even possible? Or is the hardware different enough that only the stock ROM will work?
Any suggestions are much appreciated!
Click to expand...
Click to collapse
I dont know of any official NOTE that supports both CDMA and GSM my friend. I believe you have been given one of the fake Chinese handsets and it has been passed off to you as an official NOTE.
What makes you say that it is a real NOTE?

This was purchased from one of the major Chinese carriers which is loaded with their branded firmware, not through some mom&pop shop on the street. Plus the quality of the handset is high, I doubt the clone sets can achieve the same quality, both the material and the OLED display. Here are some spec I found:
http://pdadb.net/index.php?m=specs&id=3343&c=samsung_sch-i889_galaxy_note
But still no sign of any firmware that can be flashed to this unit...

the n7000 have arm cpu while this one has Exynos cpu just like the att version. i think your phone is locked to china mobile. it could be a korean or a chinese version

For the love of God, just paste SCH-i889 into Google and you'll get all the info you need.

Really? I goggled several times and still didn't see anything about flashing it with a western firmware...

jason4962 said:
the n7000 have arm cpu while this one has Exynos cpu just like the att version. i think your phone is locked to china mobile. it could be a korean or a chinese version
Click to expand...
Click to collapse
For the record, att version doesn't have exynos. It has snapdragon.
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
steph280 said:
This was purchased from one of the major Chinese carriers which is loaded with their branded firmware, not through some mom&pop shop on the street. Plus the quality of the handset is high, I doubt the clone sets can achieve the same quality, both the material and the OLED display. Here are some spec I found:
http://pdadb.net/index.php?m=specs&id=3343&c=samsung_sch-i889_galaxy_note
But still no sign of any firmware that can be flashed to this unit...
Click to expand...
Click to collapse
This is probably the "other" international version like the n7000. There are two international versions of the Note and there is the ATT version. I don't know about firmware though becasue I don't remember seeing a thread for this model on XDA.

i believe that is the china version of galaxy note. ( mr google tells me that )
unfortunately i cant find your device in www.sammobile.com

come across this website for roms and stuff
http://www.diypda.com/forum.php?mod=forumdisplay&fid=644&filter=sortall&sortall=1

Can You upload baseband or firmware SCH I889 ?

Related

Flashing different region stock from 960N (Korea) to 960F (Asia)

The specs for both models are same including CPU but 960F (Asia) support DUAL sim whereas Korea only SINGLE sim.
If I odin 960F to my Korea model phone, will it still work? or probably freeze on E.g. Settings when I click Sim 2?
How about the Samsung Pay?
If firmware 960F can work, can I use Samsung Pay in Asia? or they are some in-built mechanism E.g. Knox that will prevent this?
Same question. I have a SCV38 - Japanese KDI/AU Galaxy S9. I have only Android 9, but there are a bunch of US Snapdragon Galaxy S9 based on Android 10. Can I flash this (US firm on JP phone)? I just want to get to Android 10. I have a feeling that wont work, and I checked for the S8 - US and JP phones, altough based on QC chipset had other hardware differences...
Anyway, appreciate any advice on the matter.
Do you have solution? I have same problem
BusterSG said:
The specs for both models are same including CPU but 960F (Asia) support DUAL sim whereas Korea only SINGLE sim.
If I odin 960F to my Korea model phone, will it still work? or probably freeze on E.g. Settings when I click Sim 2?
How about the Samsung Pay?
If firmware 960F can work, can I use Samsung Pay in Asia? or they are some in-built mechanism E.g. Knox that will prevent this?
Click to expand...
Click to collapse
As long as the specs are the same you can flash any region rom. You will just have to try it yourself and see if both sims work. Google pay shouldn't have any problems. The only problem you might have is some roms have different baseband files so you might not get network connection if it's not right for your region.
velqn said:
Same question. I have a SCV38 - Japanese KDI/AU Galaxy S9. I have only Android 9, but there are a bunch of US Snapdragon Galaxy S9 based on Android 10. Can I flash this (US firm on JP phone)? I just want to get to Android 10. I have a feeling that wont work, and I checked for the S8 - US and JP phones, altough based on QC chipset had other hardware differences...
Anyway, appreciate any advice on the matter.
Click to expand...
Click to collapse
Make sure in download mode you don't have RMM prenormal if you flash Android 10 and it's prenormal you will never be able to get rid of it.
velqn said:
Same question. I have a SCV38 - Japanese KDI/AU Galaxy S9. I have only Android 9, but there are a bunch of US Snapdragon Galaxy S9 based on Android 10. Can I flash this (US firm on JP phone)? I just want to get to Android 10. I have a feeling that wont work, and I checked for the S8 - US and JP phones, altough based on QC chipset had other hardware differences...
Anyway, appreciate any advice on the matter.
Click to expand...
Click to collapse
hey bro, is your problem solved, cause i have sam problem too
Yes, I flashed a global version/German DBT at it was OK, but had to unlock the phone, cause it was sim locked...
velqn said:
Yes, I flashed a global version/German DBT at it was OK, but had to unlock the phone, cause it was sim locked...
Click to expand...
Click to collapse
can you please provide firmware link to download. as i too wanted to change my firmware of scv38 kdi au model to remove bloatware. and what would be the trwrp installation procedure then? please adivse.
I dont have that rom or link anymore but my guess is - go to sam mobiles firmware section and they should have it.
velqn said:
I dont have that rom or link anymore but my guess is - go to sam mobiles firmware section and they should have it.
Click to expand...
Click to collapse
bro where did you download firmware ? cause my scv38 is bootloop

Question on RTN and Samsung Pay

So i bought this phone here in the middle east and i noticed that the firmware is from USA (Sprint). and i feel that the phone is used or refurbished. My question is:
1. Can someone easily modify the RTN so that the reconditioned status will be "No" so it would look like its not a refurbished one?
Also i noticed that samsung pay is showing deals from USA, my second question is:
2. How to change the country of samsung pay to a middle east one where im currently residing?
Edit: I have a SM-N960U Phone if that helps.
Edit2: Also why its not updating to Android 10?
_Intel_ said:
So i bought this phone here in the middle east and i noticed that the firmware is from USA (Sprint). and i feel that the phone is used or refurbished. My question is:
1. Can someone easily modify the RTN so that the reconditioned status will be "No" so it would look like its not a refurbished one?
Also i noticed that samsung pay is showing deals from USA, my second question is:
2. How to change the country of samsung pay to a middle east one where im currently residing?
Edit: I have a SM-N960U Phone if that helps.
Edit2: Also why its not updating to Android 10?
Click to expand...
Click to collapse
1. I have no idea about this. sorry.
2. no, you cant. you have a Sprint version so you just can use samsungpay in US according to your phone's CSC (if your phone's knox hasnt been tripped, ofcouse).
2bis. the U version cannot update to android 10 by OTA. you can use odin to flash the latest firmware to your phone. Since you're living in middle east so i suggest using the U1 version's firmware to get rid of all Sprint's bloatwares.
yaibakt said:
1. I have no idea about this. sorry.
2. no, you cant. you have a Sprint version so you just can use samsungpay in US according to your phone's CSC (if your phone's knox hasnt been tripped, ofcouse).
2bis. the U version cannot update to android 10 by OTA. you can use odin to flash the latest firmware to your phone. Since you're living in middle east so i suggest using the U1 version's firmware to get rid of all Sprint's bloatwares.
Click to expand...
Click to collapse
Hi. Thank you,
i checked the warranty(vol down+power+bixby) and it showed 0x0 so im good on that part. but i can still use samsung pay using my middle east credit card right? or totally not at all?
i checked sammobile site and there are lot of U1 firmware variants it seems. should i just choose anything except for the CDMA?
https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960U1
_Intel_ said:
Hi. Thank you,
i checked the warranty(vol down+power+bixby) and it showed 0x0 so im good on that part. but i can still use samsung pay using my middle east credit card right? or totally not at all?
i checked sammobile site and there are lot of U1 firmware variants it seems. should i just choose anything except for the CDMA?
https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960U1
Click to expand...
Click to collapse
You have to flash latest android 10 u1 firmware
I have the same model n960u from verizon and i am in middle east too.
But sadly Samsung pay will only work in usa.
Download link latest u1 firmware.
https://www.sammobile.com/samsung/g...SM-N960U1/AIO/download/N960U1UES4DTD1/338195/
If you want everything work in middle east then you better sell this model and get international model N960F dual sim.
But in my opinion N960U is much more better because it has snapdragon 845 SOC chipset with adreno gpu its very powerful for gaming and battery efficient
and N960F has exynos with mali gpu and it's not that good as snapdragon.
And also thoisands of users has screen discoloration issues "hardware failure" with exynos model after android 10 update.
Apart from Samsung pay everything will work fine same as international model if you flash u1 firmware
Trex888 said:
You have to flash latest android 10 u1 firmware
I have the same model n960u from verizon and i am in middle east too.
But sadly Samsung pay will only work in usa.
Download link latest u1 firmware.
https://www.sammobile.com/samsung/g...SM-N960U1/AIO/download/N960U1UES4DTD1/338195/
If you want everything work in middle east then you better sell this model and get international model N960F dual sim.
But in my opinion N960U is much more better because it has snapdragon 845 SOC chipset with adreno gpu its very powerful for gaming and battery efficient
and N960F has exynos with mali gpu and it's not that good as snapdragon.
And also thoisands of users has screen discoloration issues "hardware failure" with exynos model after android 10 update.
Apart from Samsung pay everything will work fine same as international model if you flash u1 firmware
Click to expand...
Click to collapse
Not quite true about these things:
- samsungpay: here in asia, US version N960U can use sspay with some US banks' cards, ex: citibank credit card.
- screen discoloration issue: many Snap version phones have that issue too afaik, so i dont think its chip related. But yeah, the cause is still unknown.
I do agree that snap version is more powerful than exynos one.
Trex888 said:
You have to flash latest android 10 u1 firmware
I have the same model n960u from verizon and i am in middle east too.
But sadly Samsung pay will only work in usa.
Download link latest u1 firmware.
https://www.sammobile.com/samsung/g...SM-N960U1/AIO/download/N960U1UES4DTD1/338195/
If you want everything work in middle east then you better sell this model and get international model N960F dual sim.
But in my opinion N960U is much more better because it has snapdragon 845 SOC chipset with adreno gpu its very powerful for gaming and battery efficient
and N960F has exynos with mali gpu and it's not that good as snapdragon.
And also thoisands of users has screen discoloration issues "hardware failure" with exynos model after android 10 update.
Apart from Samsung pay everything will work fine same as international model if you flash u1 firmware
Click to expand...
Click to collapse
yay! a fellow member that is located in dubai!
it means i will be busy backing up my data over the weekend and upgrading the OS.
im checking your link from sammobile. what does AIO,BST,XAA,XAS mean?
well, im not gung-ho on having samsung pay. i can live without it as long as i got snapdragon
im checking your link from sammobile. what does AIO,BST,XAA,XAS mean?
It doesn't matter it's just csc code for who use American sim card.
If you use this phone non american sim it will use xaa unlocked csc code by default no matter which firmware csc you flash
They all comes multi csc firmware.
I recommend you to wait until next week because there will be new updated firmware available oneui 2.1 update with tons of new features from note 10.
Tha firmware i gave you the link earlier is oneui 2.0.
Trex888 said:
im checking your link from sammobile. what does AIO,BST,XAA,XAS mean?
It doesn't matter it's just csc code for who use American sim card.
If you use this phone non american sim it will use xaa unlocked csc code by default no matter which firmware csc you flash
They all comes multi csc firmware.
I recommend you to wait until next week because there will be new updated firmware available oneui 2.1 update with tons of new features from note 10.
Tha firmware i gave you the link earlier is oneui 2.0.
Click to expand...
Click to collapse
Thank you for the help.!
I downloaded the XAA type and downloaded the patched odin3 that you have given me via link and its now Sprint-Free

how to revert s10 to previous firmware

so i bought my s10 from dubai and came to india and had to factory reset the device. now i have use indian version and samsung pay changed to indian version as well. . even the mobile signal is getting messed up.
what do i have to do to change back to the original version. please help
Depends on the actual model number you have, so you need to tell us that. Snapdragon phones vs Exynos phones have different procedures.
Once you identify which you have, there are threads here on how to flash stock roms. Read them carefully and ask questions there.

Question Help to clarify doubts about CSC changing with Samkey

Greetings folks, i have been reading a bit about changing the csc of the phone, I own a s21 Ultra G998B version and its branded with a owo rom, i live in Chile, and the Claro company of course is not up to date with the otas, and also i want to flash a clean rom with no bloatware. I read that with samkey i can change the CSC to an OXO (mine is owo) rom so i can then flash the muti csc rom. I also read that in order for samkey to work i have to roll back to may update? i'm currently on august update. am I correct in the process? can anyone recommend to which csc i can change so i won't turn my phone into a mess
thanks to all who can provide some light jeje
Isn't CHO the Multi-CSC Firmware for Chile?
varcor said:
Isn't CHO the Multi-CSC Firmware for Chile?
Click to expand...
Click to collapse
hi, yes it is, but i looked in samfirmware and the cho version is until august, so i think it would be the same? mine is chl which is for CLARO company and is also in august update, i would like september updates so i can try the andy 12 beta
When I bought it, it had May firmware. I changed CSC before any other update .
So , may update is working for SamKey.
Otherwise, you need to flash with latest Odin the may firmware of your CSC you want (downgraded)
Hello, could someone please tell me, is it possible to flash g998u1 with Thailand firmware, Chinese, etc?
Lexabogdanov said:
Hello, could someone please tell me, is it possible to flash g998u1 with Thailand firmware, Chinese, etc?
Click to expand...
Click to collapse
No to both. Thailand FW is configured for the Exynos SoC. The China FW, even though it's configured for the Snapdragon SoC it's not compatible with the US Unlocked variant. Do you live in Thailand? If so I'm curious why you aquired a US device. We often see users buying non native devices, maybe they got a good price, maybe they moved out of their region, maybe it's a company issued phone but it's a pain when call features or 5G don't align with your service provider. Flashing non stock firmware often causes more problems than it solves. Samsung is moving closer and closer to proprietary software for individual models, mix and match is becoming a thing of the past.
varcor said:
No to both. Thailand FW is configured for the Exynos SoC. The China FW, even though it's configured for the Snapdragon SoC it's not compatible with the US Unlocked variant. Do you live in Thailand? If so I'm curious why you aquired a US device. We often see users buying non native devices, maybe they got a good price, maybe they moved out of their region, maybe it's a company issued phone but it's a pain when call features or 5G don't align with your service provider.
Click to expand...
Click to collapse
I live in Kaliningrad, Russia. This device I've bought for 30usd, new, boxed,, here, in Russia, so I was looking for ways to make it work as a Russian device(full menu translation, bands, etc.). Actually no matter, which language is used, at first I had troubles using android 11-there was no esim. Than using abd I flashed it to oneui 4.0, esim works, all lte bands are supported.
Lexabogdanov said:
I live in Kaliningrad, Russia. This device I've bought for 30usd, new, boxed,, here, in Russia, so I was looking for ways to make it work as a Russian device(full menu translation, bands, etc.). Actually no matter, which language is used, at first I had troubles using android 11-there was no esim. Than using abd I flashed it to oneui 4.0, esim works, all lte bands are supported.
Click to expand...
Click to collapse
And 5G is not supposed for some years )))
Lexabogdanov said:
I live in Kaliningrad, Russia. This device I've bought for 30usd, new, boxed,, here, in Russia, so I was looking for ways to make it work as a Russian device(full menu translation, bands, etc.). Actually no matter, which language is used, at first I had troubles using android 11-there was no esim. Than using abd I flashed it to oneui 4.0, esim works, all lte bands are supported.
Click to expand...
Click to collapse
$30 USD is an awesome deal! If all bands and esim are functional that's probably as good as it gets. Unfortunately Exynos compatible FW which is dominant in Russia can't be installed on your device. Gboard may be your best option for Russian Language.

Strange firmware version G900FXXU4BOK4

Hello everyone
I bought a S5, on the sticker under the battery there is information that it is the G900F model, while in Download mode I have information that it is G900A. I know the sticker is most likely not genuine.
After the purchase, the phone had the software in a multilingual version, G900FXXU4BOK4 versions to be exact. There was no rubbish in it, it looked like a clean rom. It was android 5.1 Lolipop and I needed Android 6 for a certain application so I updated it to G900AUCS4DQD1. Unfortunately, this software has no Polish language and is full of garbage from AT&T.
I would like to go back to the previous software, but nowhere I can even find information about what soft it was. The G900FXXU4BOK4 version does not seem to exist. How did I previously have versions for the G900F on this phone?

Categories

Resources