Related
[GT-P6800][3g]Deodexed&Zip-aligned System Apks (cwm update.zip) & System Bar Mod
Hi,
Deodex / zip alignment of the system/framework apks taken from Stock firmware:
From [ZSLA2] firmware. (apps / framework). tested working for this firmware but may work on others.
Again these are just the deodexed versions of the apps already on your system.
You are not changing anything kernel / csc / your data etc.
This is a cwm flashable zip.
Its in two parts. (join the zip files into one)
http://www.mediafire.com/download.php?cwv5ri52j850hbz
http://www.mediafire.com/download.php?qwjfkmdi7z5qepr
(make a cwm backup first - just in case)
Reboot to cwm recovery:
if you copied to internal memory - in cwm go to "install zip from sdcard"
if you copied to your external sdcard - install zip from internal sdcard.
(cwm labels the phone memory / sd card like this !!)
First boot will take approx 3~4 mins.
System Bar Mod - now part of power menu mod in another post.
ezynow
Appreciate the effort, unfortunately boot loops on my tab.
Thanks.
pa64 said:
Appreciate the effort, unfortunately boot loops on my tab.
Thanks.
Click to expand...
Click to collapse
what part did you flash?
thanks.
I flashed the deodex.
Thanks.
---------- Post added at 12:13 AM ---------- Previous post was at 12:09 AM ----------
Just realized I am on a different firmware (XXLA3).
Could it be the cause for the bootloop?
pa64 said:
I flashed the deodex.
Thanks.
Click to expand...
Click to collapse
cool - if its not too much effort can manually copy over the apks from the zip into the /system/framework/ and into /system/app/ using adb. (first remove all files under those folders).
then wipe davik & wipe cache partition.
and reboot.
i have installed it on my tab so should work ok.
might need to reupload again
thanks again
pa64 said:
I flashed the deodex.
Thanks.
---------- Post added at 12:13 AM ---------- Previous post was at 12:09 AM ----------
Just realized I am on a different firmware (XXLA3).
Could it be the cause for the bootloop?
Click to expand...
Click to collapse
ok i tried it again and worked fine so looks like a firmware incompatibilty issue.
would like to narrow the issue down.
appreciate the feedback.
just to make sure, can you please post the MD5 checksum of the Deodex zip file?
Thanks.
pa64 said:
just to make sure, can you please post the MD5 checksum of the Deodex zip file?
Thanks.
Click to expand...
Click to collapse
uploaded md5.
in first post, just rename it to GTP6800DEODEX.zip.md5
cheers
Guys, please post the stock! Or op, please post the stock battery stuff!
ftgg99 said:
Guys, please post the stock! Or op, please post the stock battery stuff!
Click to expand...
Click to collapse
all stock apks are in the original deodexed zip. just extract it from /system/framework/ and copy over.
i will edit the batt stuff when i get some time should remove it in the mean time.
did u flash the deodexed.zip ok in the first place?
MD5 did not match. Possibly a bad download.
Your file's link is temporarily disabled in Dropbox...
Can you post on another file server?
Thanks.
ezynow said:
uploaded md5.
in first post, just rename it to GTP6800DEODEX.zip.md5
cheers
Click to expand...
Click to collapse
pa64 said:
MD5 did not match. Possibly a bad download.
Your file's link is temporarily disabled in Dropbox...
Can you post on another file server?
Thanks.
Click to expand...
Click to collapse
Sorry dude.
Dont think I can get any more links up for a while. Will update when I can.
These were just meant for evaluation purposes only not anything more.
Hopefully I can sort it out soon.
cheers.
I'm currently recovering a hard bricked GT-P6800 and have it revived via JTAG. ODIN is not permitting a factoryfs file to flash to the device but I have been successful in flashing all other zones (cache, hidden, param, zimage and recovery). Can some PLEASE do a factory data reset, then a backup in CWM and upload that backup for me to recover from?
Thanks!
connexion2005 said:
I'm currently recovering a hard bricked GT-P6800 and have it revived via JTAG. ODIN is not permitting a factoryfs file to flash to the device but I have been successful in flashing all other zones (cache, hidden, param, zimage and recovery). Can some PLEASE do a factory data reset, then a backup in CWM and upload that backup for me to recover from?
Thanks!
Click to expand...
Click to collapse
how did u do a hard brick?
i have sucessfully used heimdall (linux) before to flash the factoryfs from the stock firmware. there is a download link somewhere.
also when trying a dd image of factoryfs /system partition using heimdall was not sucessful. so odin might be the same.
have u tried a stock factoryfs?
The unit was hard bricked with an invalid PIT and 10.1v firmware meant for a Tegra 2 unit. I'm very familiar with any/all flashing techniques and have tried to flash this zone with both ODIN, Heimdall and SPT Tool. It refuses to accept a factoryfs flash or a bootloader flash. I broke down a firmware and individually tar'd all files within it and they ALL flash except for factoryfs which fails at around 5-10% religiously. This is why I need a CWM backup or zip to flash/restore from. If you could PM the link to me that would be amazing as I understand you may not want it public. I'm sure you know within a backup (after a factory reset) there is no data to remain that would be your personal data so it's 100% safe. Once I am done, I will fully JTAG dump the first 1024MB of the EMMC chip to create a JTAG firmware backup as a secondary method of recovery when ODIN does not work...
Really could use this if you get a chance...
connexion2005 said:
Really could use this if you get a chance...
Click to expand...
Click to collapse
I will try find something for you when I get a chance
Ezynow,
since you deodexed your tab, what is the outcome in term of speed?
I feel plenty of lag on scrolling within the browser, any better wth deodex?
Cheers.
ezynow said:
I will try find something for you when I get a chance
Click to expand...
Click to collapse
Thanks I'd appreciate that and I'll shoot you a donation if possible to buy you a drink or 2.
pa64 said:
Ezynow,
since you deodexed your tab, what is the outcome in term of speed?
I feel plenty of lag on scrolling within the browser, any better wth deodex?
Cheers.
Click to expand...
Click to collapse
sometimes i think its faster but i think this has to do with zip alignment as well.
for my browser, its pretty snappy. i do have flash/scripts turned to on demand as opposed to always on.
also i use a ad blocking hosts file.
xda defn. loads faster than before
connexion2005 said:
Thanks I'd appreciate that and I'll shoot you a donation if possible to buy you a drink or 2.
Click to expand...
Click to collapse
i though i had a default backup somewhere, i will try find it. will just a system partition backup do. i have one of those from a cwm. i will sort something out and pm you.
Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!
lucky88shp said:
Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!
Click to expand...
Click to collapse
Just DL the SGA Rom to your tablet and flash it with recovery .
more specific instructions please...
sstar said:
Just DL the SGA Rom to your tablet and flash it with recovery .
Click to expand...
Click to collapse
What do you mean when u say flash it with recovery? Isn't using ACMEInstaller method done in recovery mode? Can you be more specific?I apologize for my ignorance...
lucky88shp said:
What do you mean when u say flash it with recovery? Isn't using ACMEInstaller method done in recovery mode? Can you be more specific?I apologize for my ignorance...
Click to expand...
Click to collapse
No , I mean when you boot up among the choices you have will be either clockwork or TWRP that is the recovery I am referring to , either will give you the option to install a DL zip.
What are you using ?
sstar said:
No , I mean when you boot up among the choices you have will be either clockwork or TWRP that is the recovery I am referring to , either will give you the option to install a DL zip.
What are you using ?
Click to expand...
Click to collapse
I noticed I do not have any option for CWM or TWRP in the moboot at restart, only webos, webos recovery, cyanogenmod, reboot and shutdown. But I do have CWM installed as I just updated it, I can just go to the ROM manager in the apps and start CWM flash recovery from it...can I do it that way? Also can just flash the ROM on top of my current CM9 installation and will my apps be deleted?
lucky88shp said:
I noticed I do not have any option for CWM or TWRP in the moboot at restart, only webos, webos recovery, cyanogenmod, reboot and shutdown. But I do have CWM installed as I just updated it, I can just go to the ROM manager in the apps and start CWM flash recovery from it...can I do it that way? Also can just flash the ROM on top of my current CM9 installation and will my apps be deleted?
Click to expand...
Click to collapse
You can do that and if you flash without doing a system wipe you will retain all your apps.
Possibly an easier way for you would be to DL Goo manager from play store and then install open recovery script which will appear as shown in the screenshot below after you hit the 3 dots in the top right hand corner. Say yes to everything and it will install the latest TWRP for you.
You could then use goo to browse compatible Roms and DL SGA's and use it to flash the Rom/zip for you as shown in the second pic.
Which ever method you choose do make a backup before with your preferred recovery either CWM or TWRP.
I hope this helps.
Sent from my cm_tenderloin using Tapatalk 2
sstar said:
You can do that and if you flash without doing a system wipe you will retain all your apps.
Possibly an easier way for you would be to DL Goo manager from play store and then install open recovery script which will appear as shown in the screenshot below after you hit the 3 dots in the top right hand corner. Say yes to everything and it will install the latest TWRP for you.
You could then use goo to browse compatible Roms and DL SGA's and use it to flash the Rom/zip for you as shown in the second pic.
Which ever method you choose do make a backup before with your preferred recovery either CWM or TWRP.
I hope this helps.
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? And yeah, would you happen to know how to get the CWM recovery option in the moboot menu? Thanks a lot for all your help!
lucky88shp said:
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? Thanks a lot for all your help!
Click to expand...
Click to collapse
Probably the nightly but only because it is the most recent. However whichever you initially go for make a backup then try the other and make another backup that way you can relatively easily switch between the two in order to decide which you prefer.
Have fun.
---------- Post added at 09:43 PM ---------- Previous post was at 09:37 PM ----------
lucky88shp said:
One last question, which one would you say is better, the latest Nightly from CM team as of today's release or the Fat n Creamy? And yeah, would you happen to know how to get the CWM recovery option in the moboot menu? Thanks a lot for all your help!
Click to expand...
Click to collapse
Just saw the edit, DL Rom toolbox lite and edit the default recovery but it should show up in moboot anyway.
Can you post a screenshot of your boot folder please.
sstar said:
Probably the nightly but only because it is the most recent. However whichever you initially go for make a backup then try the other and make another backup that way you can relatively easily switch between the two in order to decide which you prefer.
Have fun.
---------- Post added at 09:43 PM ---------- Previous post was at 09:37 PM ----------
Just saw the edit, DL Rom toolbox lite and edit the default recovery but it should show up in moboot anyway.
Can you post a screenshot of your boot folder please.
Click to expand...
Click to collapse
LOL, where is the boot folder? I searched via the File Browser, and couldn't find it....And how do I take a screenshot?
lucky88shp said:
LOL, where is the boot folder? I searched via the File Browser, and couldn't find it....And how do I take a screenshot?
Click to expand...
Click to collapse
Use Rom toolbox , screenshot should be an option when holding the power off button , you sound a little bit new to this lark (I only started 6 months ago) so don't worry if you can't find it.
Can/ have you actually gone into CWM as I am not sure that it's installed because it would/should show in the moboot menu.
Check and let me know. If its not I think Goo manager and TWRP may be an easier option.
sstar said:
Use Rom toolbox , screenshot should be an option when holding the power off button , you sound a little bit new to this lark (I only started 6 months ago) so don't worry if you can't find it.
Can/ have you actually gone into CWM as I am not sure that it's installed because it would/should show in the moboot menu.
Check and let me know. If its not I think Goo manager and TWRP may be an easier option.
Click to expand...
Click to collapse
Here are the screens for boot folder. And as I mentioned before I believe I have CWM installed as the first thing that popped after flashing the ROM was an update for CWM.
According to your screenshots (Well done). You don't as there is no ulimage called CWM/ clockwork or TWRP . I suggest the Goo route to install TWRP once done it is VERY user friendly, then you can make backups before proceeding any further, then if you wish and are not happy use is to install a CWM zip.
lucky88shp said:
Hello,
Today for the first time I installed Android on my touchpad(I know I am very late to the party!). I first tried to install the Fat n Creamy ROM(12/02 build)sing ACMEInstaller2 with the ROM zipfile, moboot 0.35 and gapps zipfile in cminstall folder. After flashing the ROM, which I believe didn't properly happen due to some incompatibility or incorrect install method, and so on reboot after flashing I got no option for android in moboot, only webos, reboot and shutdown options were there. Then i retried by putting just the ROM in cminstall folder, which didn,t work either. So I ended up installing official CM9 ROM for now using the update tenderloin zip file, CM9 zip file, moboot and gapps fix in the cminstall folder, which worked perfectly and I am typing this from it! But now I want the Fat n Creamy ROM...how do I install it? Can I install it on top of this or do I have to format and reinstall? If so, how do I do it? Thanks!
Click to expand...
Click to collapse
Can you post the acmeinstaller2 zip? I cannot find it
sstar said:
According to your screenshots (Well done). You don't as there is no ulimage called CWM/ clockwork or TWRP . I suggest the Goo route to install TWRP once done it is VERY user friendly, then you can make backups before proceeding any further, then if you wish and are not happy use is to install a CWM zip.
Click to expand...
Click to collapse
K thanks...I noticed too that there was no image file for CWM. I will go the goo manager route. Again, thanks a lot for all your help, really appreciate it!
ScottBroker said:
Can you post the acmeinstaller2 zip? I cannot find it
Click to expand...
Click to collapse
You should really upgrade to 3 available here http://goo.im/devs/jcsullins/cmtouchpad/testing/ACMEInstaller3
But here is 2 anyway https://www.box.com/shared/32e48b3b777f2bfc7866
ScottBroker said:
Can you post the acmeinstaller2 zip? I cannot find it
Click to expand...
Click to collapse
Here it is. Download the novacom drivers and its included with it.
http://tinyurl.com/brfuvqn
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.
CLOCKWORKMOD RECOVERY 6.0.1.2
Click to expand...
Click to collapse
This is the CWM recovery found on the latest CM9 sources.
INSTALLATION
Click to expand...
Click to collapse
Download the update.zip found here
Place it on your SD card
Flash it on your actual recovery (doesn't matter if it's stock one)
USAGE
Click to expand...
Click to collapse
Press home + volume up + home button to enter
Our sources can be found on BroadcomCM Github
reserved
Wow ..well done ..
Sent from my GT-S5830i using Tapatalk 2
Wondered.....nice work bro....:thumbup::beer:
Send from Tapatalk 2
When I tried to wipe cache with this version, my phone stopped detecting the cache partition :/ Doing it again with version 5 put it back to normal,, but yeah.
Sent from my HP Pavilion g6 Notebook PC using Tapatalk
Sorry for english.
Bug: If i unmount /system and i can mount this again. Error: Error mounting /system
This problem is and with /data and /cache..
With /sdcard work good.
Other problem is..i can mount /sd-ext ..i have ext3 partition.
I can try to make backup (for testing) because i can remount /data /system /cache..
Prob with "STATUS 7"
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
cn u xplane properly
i cnt getit..
if ur getting problem with cmw
then
Flash via odin
In PDA section
https://docs.google.com/file/d/0BzmTivDo1WcYTmp1N0hibG9UMTg/preview?pli=1
hit thnx if i help u
Sent from my GT-S5830i using Tapatalk 2
Here is the Solution!!
Cool vats said:
After Flashing with cwn 6.. Im still having the same Prob.. I want to download c11 on my Ace i ?
Any Suggestions!!:crying:
Click to expand...
Click to collapse
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Cool vats said:
Flash via odin
In PDA section :good:Download it from attached files!!
https://docs.google.com/file/d/0BzmT.../preview?pli=1
NOTE!! Flash in PDA Section only!!
:victory:
Click to expand...
Click to collapse
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
dj88 said:
exactly what i said in previous post
:silly:
Hit thnks if i help you
Sent from my GT-S5830i using Tapatalk
Click to expand...
Click to collapse
I think he even copied your link LOL.
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Cool vats said:
No, Bt i kw from whre you people get this..
Dont act smart!!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I didn't said that
just shared link..
Hitesh2626 said:
I think he even copied your link LOL.
Click to expand...
Click to collapse
lol
Installation problem
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
miguelagarcia2 said:
Hi everyone
A friend gave me a S5839i and I tried to install cwm a hundred times, and It was completely impossible. I access to the stock recovery, apply the update from sd card and after selecting the approppiate file cwm appears on screen, but when you access again to recovery, goes to stock one. ¿Anybody can help me?
Thanks in advance
Click to expand...
Click to collapse
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
il3gal said:
What kernel your use? On Raphael Kernel you cannot replace CWM without flash with odin (boot.img)
Click to expand...
Click to collapse
It is stock, I'm triying to flash another rom
Enviado desde mi GT-I8190N mediante Tapatalk
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
kingsdeb said:
Getting Status 0 error while installing cm-11 from your link with this CWM 6.0.1.2
I don't know but how i have the CWM 6.0.1.2 as default after trying lot of things and my phone directly boots to 6..0.1.2 instead of stock recovery.
Please help how to install CM-11. Even CM-10 will do but not sure how to get the working build with my above CWM.
Click to expand...
Click to collapse
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
RevolutionBolt said:
MTD build does not required a oldest recovery. Find CWM 6.0.5.3 at Discussion thread. Restore back to stock and flash again. Well, it should be work for now.
Click to expand...
Click to collapse
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
kingsdeb said:
How to restore back to stock recovery ? I have some 6.0.5.3 CWM as well but not working. A little more explanation will help.
Click to expand...
Click to collapse
Well, to get to stock recovery, download XXLK1 firmware anywhere. And restore with Odin. Make sure you put files in right places. And install back CM11 with latest nightly with CWM 6.0.5.3. It should work for now. You'll be fine after install but don't forget install Galaxy Y MODEM after installed CM11. It's bug on our CM11 if you don't install, we can't boot without install it. If you know this already, just leave it.
Welcome to a world of
New its Walker Blue Part 2
I am not responsible for warranty use at your own risk!
Im bring you guys walker-blue stock rooted rom for the J00T T-Mobile Version
The rom will needs to sit for maybe 5
mins before you see it boot up
INSTRUCTIONS
Backup any important data! Phone storage will be wiped
Nandroid backup is recommended! (=
1. Download and put on external SD card
Rom:https://www.androidfilehost.com/?fid=529152257862715229
2. Boot into recovery, and wipe entire phone Wipe > Advanced Wipe > Davik / Art Cache, Cache, Data,system
3. Install the files ROM
4. Reboot your Rom
5. Then there you go
Donations
walkerblue2023: On My Page
What are the features? Is it just stock rooted?
Yes it just stock rooted
walkerblue2023 said:
Yes it just stock rooted
Click to expand...
Click to collapse
Is it the latest update?
xxxericxxx said:
Is it the latest update?
Click to expand...
Click to collapse
Yes .....donate to my paypal.....beer me ....thanks
if I put this on do I have to install dm-verity package after or not, has anyone tried this?
xxxericxxx said:
if I put this on do I have to install dm-verity package after or not, has anyone tried this?
Click to expand...
Click to collapse
you can do it before
So I just was trying to backup everything in recovery and it starts up fine and starts saying md5 blah blah, then fails every time. Says failed to mount data, invalid argument. ..I was doing this in preparation for flashing the new rom you ported (v3) already did a titanium backup and saved to my drive, just trying to make life easier just in case.
fullofhell said:
So I just was trying to backup everything in recovery and it starts up fine and starts saying md5 blah blah, then fails every time. Says failed to mount data, invalid argument. ..I was doing this in preparation for flashing the new rom you ported (v3) already did a titanium backup and saved to my drive, just trying to make life easier just in case.
Click to expand...
Click to collapse
You need to format your data in twrp or change your syorage location to ext sd not internal
Thanks to Zach ?
is there an md5 for the zip? Think I am already to give it a try but need to make sure it downloaded correctly.
walkerblue2023 said:
You need to format your data in twrp or change your syorage location to ext sd not internal
Thanks to Zach ?
Click to expand...
Click to collapse
Thanks guys, I formatted and it works, flashed he v3 custom ROM.i tried 3x and I get the SuperSU file to flash successfully or so I thought, but once it boots up I have the rom but no root..Need help please
xxxericxxx said:
is there an md5 for the zip? Think I am already to give it a try but need to make sure it downloaded correctly.
Click to expand...
Click to collapse
yes
fullofhell said:
Thanks guys, I formatted and it works, flashed he v3 custom ROM.i tried 3x and I get the SuperSU file to flash successfully or so I thought, but once it boots up I have the rom but no root..Need help please
Click to expand...
Click to collapse
this rom comes rooted
I accidentally posted that post in this thread, it was supposed to be the notexperience ROM.i can't get that SuperSU file to work.it flashes but nothing.it even installs the application,but says binary is not found
fullofhell said:
I accidentally posted that post in this thread, it was supposed to be the notexperience ROM.i can't get that SuperSU file to work.it flashes but nothing.it even installs the application,but says binary is not found
Click to expand...
Click to collapse
him that is weird try superuser 2.79 but not the srt version
walkerblue2023 said:
him that is weird try superuser 2.79 but not the srt version
Click to expand...
Click to collapse
Ok I'll check it out, caleb told me to use the update one 1.51, I tried that and the one you listed with the ROM.. (Notexperience v3)..No dice.Like I said it says they flash successfully both, but no luck. The one caleb said at least installs the app and u see it in the app drawer. I'm at am empasse
what is the md5, you should put it on first page, would help rule out problems installing.
xxxericxxx said:
what is the md5, you should put it on first page, would help rule out problems installing.
Click to expand...
Click to collapse
bad idea will make the boot slower in TWRP and plus its runnning t-mobile lastest update so you should be good!
I hope you are confused. You can write the numbers of the md5 of the zip you uploaded on the first page, not adding one for twrp to check, but so that people can still use a checker before they try to install it and say you messed something up when it was just a bad download
xxxericxxx said:
I hope you are confused. You can write the numbers of the md5 of the zip you uploaded on the first page, not adding one for twrp to check, but so that people can still use a checker before they try to install it and say you messed something up when it was just a bad download
Click to expand...
Click to collapse
Don't use it if you don't trust it