[Q] Help Needed GT-I9000 (Doesn't Respond) - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi Friends,
I have a big problem with my Samsung Galaxy S GT-I9000.
1) I have recently rooted using ODIN and Installed ICS ROM from XDA site. That was working fine but bit slow. So I thought of restoring back to my original condition.
2) I installed rom manager and clicked on reboot to recovery option. It rebooted and am in CWM Recovery manager. But When I tried to restore back my backup, it says
E:can´t mount CACHE:recovery/comand
E:Can´t mount CACHE: recovery/log
E:Can´t open CACHE: recovery/log
3) Later I Turned off my Phone using reboot now. And Once rebooted it only showed Galaxy S booting screen. And after a long time (Approx. 15 min after) It came back to recovery manager.
4) I thought I can't do anything and turned off my mobile. Removed SD card, Battery and after 10 min kept back the battery .
5) Later , I formatted SD card, Copied a New ROM (2.3.4 Ginger Bread), went back to recovery mode, and when I tried to Install, it took 5 min and turned off . But it never booted back.
I can only see the Options and back buttons lighting when i switched it ON.
I cannot go back to either Recovery mode or download mode.
Please help me at any cost. The only Hope i have is XDA forum.
===============
Thanks and Regards,
Ananth

Good Morning all!
My Galaxy S GT-I9000 will not turn on or go into download mode nothing.
Plug it into USB and the two white buttons ( Options and Back) light up and the pc installs drivers but that's it.
There most be a way of installing from scratch?
Any Hard reset or any other chances to make my phone working..
Any ideas would be a great help....
Looking for replies.....

If you can't get in to download mode its hard bricked.....only way to get it working would be to buy a USB jig from eBay to get your phone in to download mode and flash the stock rom from Odin ...good luck
Sent from my GT-I9000 using xda premium

superalphajellybean said:
If you can't get in to download mode its hard bricked.....only way to get it working would be to buy a USB jig from eBay to get your phone in to download mode and flash the stock rom from Odin ...good luck
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
You can always make your own jig, there are plenty of guides on the forums here. I wouldn't recommend this though as jigs on ebay are incredibly cheap and the time spent making one can be considerable for zero gain if you aren't particularly proficient.
It definetely sounds like you've hard bricked your phone as you can't even access download mode.

jig is the only solution .........

Related

[Q] Stuck in a bootloop... HAALPPPP!!!

Hi all,
I recently got a samsung i9000 after owning an htc desire for a while.... I was more than happy with cm7 on the htc so i rooted etc and installed it on my galaxy... but it seems that its a bit more buggy on the i9000 port and i had loads of force closes and my phone was pretty unusable... so i then used clockwork recovery to install what i believed was the correct version of darky's rom 10.2 (http://forum.xda-developers.com/showthread.php?t=814091) and now im stuck in a bootloop... when i turn it on for 'normal' use, the original GALAXY S logo comes up (the one that says SAMSUNG at the bottom of the screen.... then it switches to the GALAXY S logo with cyanogen(mod) underneath it, then it restarts and im back to the original SAMSUNG logo.
I've tried to enter download mode (vol down, home then power) and when i do this, it just restarts with the original logo in a loop until i let go, then the cyanogen(mod) logo comes up.
Ive downloaded kies and odin to a fresh machine, but when i connect the phone over usb, I get the litter circular timer icon lighting up my phone for a few seconds, then the cyanogen(mod) screen comes up for a few seconds.... and then reboots....
Anyone got a way out for me? ive been without a phone for a few days and its really hurting now!
So you can't get into download mode??, did you flash back to stock rom before flashing Darky's? Because with CM7 a froyo bootloader is needed, and with Darky's a GB bootloader is needed. If you can get into recovery, go to mounts and storage, format system, data, cache, and datadata. Then pull battery out and try getting into download mode again Vol down + home + power. Report back dude
Sent from my GT-I9000 using XDA Premium App
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
deeuk said:
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
Click to expand...
Click to collapse
No I'm afraid not, their are two other things you could try....using adb booting into download mode from their....or a jig....that will force it into download mode, u in the UK??
Sent from my GT-I9000 using XDA Premium App
I guess you need a jig to get into download mode. after that, try to flash to different ROMs and see if you have fix the problem.
If you internal sd card is physically damaged, try this method here:
http://forum.xda-developers.com/showthread.php?t=1188482
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
deeuk said:
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
Click to expand...
Click to collapse
I could send you my jig if you like? As long as you send it back when finished?? PM me if you want it because in all honesty if your not familiar with adb I wouldnt go messing around with it
Sent from my GT-I9000 using XDA Premium App

All gone wrong.

Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??
exceluk1 said:
Something really gone wrong for me here and have a feeling I have a brick.
1. Flashed ROCKET ROM-V19-XXLA4 from external sd using CWM.
2. Flash was confirmed rebooted.
3. Got Bootloop (Rocket Logo)
4. Could boot into download mode but PC not seeing device.
5. Removed battery for over 1 min.
6. Still no difference, the device just cant be seen. Even after reinstalling the drivers. via Kies trouble shooting.
Anyone have any ideas??
Click to expand...
Click to collapse
Did you follow hus advuce to a t.
Did you have a backup
Can yiuget into recovery via vol up.home.power if si restore last working config.
Failing that its odin and stock rom
Its virtually impossible to brick a samsung phone yesvit can occur but v v unlikely
Sent from my GT-N7000 using xda premium
I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....
exceluk1 said:
I can boot into "Odin Mode" but the device is just not responding via USB.
I do have a backup on an external device but without being able to boot into CWM or My laptop to recognise the device im stuck.....
Click to expand...
Click to collapse
So if you open odin on pc making sure kies is closed fully inc tray icon and then plug the phone in it does not show in odin as ready ir cinnected
Sent from my GT-N7000 using xda premium
I had the same problem today, but it worked when i did this:
- Volume down + Home + Power
- Do not press continue yet
- Open Odin
- Connect it to the computer
- Choose Continue on the Note
Now the computer should install two new drivers (modem and another one), and then the phone will pop up on the computer.
Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.
exceluk1 said:
Odin is seeing :- 0:[COM4]
Thanks so much really thought I'd bricked it. Forgot all about Odin A Beer and a thanks to you both.
Just a note, not sure what went wrong but I had to flash a full stock ROM including the Modem, Code and Multi to get it working again.
Click to expand...
Click to collapse
Well least ya back up and running thats all that matters.
I can now sleep Didnt want to leave ya hanging lol
We have all had that scare moment when it goes wrong but so sweet when she boots up again
Sent from my GT-N7000 using xda premium
2nd attempt took all of 5 - 6 mins with no issues at all

That phone hard bricked? Only Emergency Dload Mode works!

Hey guys.
I got here a Samsung Galaxy Ace S5830 (without i) and this phone doesn't turn on. Sometimes I'm getting into the "Emergency dload mode" but the usual download mode or recovery doesn't work. In december 2012 i flashed CM7 on this phone, after that I did nothing which could brick the phone. If I'm trying to plug it into my computer to odin that device the computer doesn't recognize the phone ("USB-Device not recognized", so it's not a driver problem, the whole device isn't recognized). If I turn the phone into that emergency dload mode by pressing volume+home+power this mode disappears after a few seconds, sometimes after 3, sometimes after 6, sometimes after 10 seconds. Can it be the battery? I already charged the phone half an hour. Do you think I can reanimate that phone? Or you think i need to jtag it?
Thanks in advance for any help!
Hi skayable,
You could read this hubix's tutorial http://forum.xda-developers.com/showthread.php?t=1034145
Good luck.
Sent from my GT-S5830 with AceOne 2.1
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
skayable said:
But my Problem is that neither Odin nor my Computer recognizes the phone. I am not getting into download mode. Only in the emergency download mode which is not flashable with Odin.
But thanks anyway. I think that phone is dead.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
Hi skayable,
You could try installing the drivers, again, just in case.
Good luck.
Sent from my GT-S5830 with AceOne 2.1
Did you take the battery out before pressing all the buttons? I've bricked mine a few times now (noob) and have managed to get a connection with Odin each time. Sometimes takes a few attempts, poss to do with my hands being too small to hold all buttons and put battery back in. One time, Odin took several minutes to find the device.
It's probably not a good idea to be using a flat battery. And do try re-installing the Windows standard drivers. Don't give up! If a noob can do it ...
So I sent that phone in service. They said, that the software was modified and the warranty is void. I said, they shouldn't repair it and send it right back. When I got the phone back, it worked! They flashed a new bootloader, found out that it's rooted and sent me back. Good method to get it repaired
That's so funny.
Help with my galaxy ace bricked
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
jhay0017 said:
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
Click to expand...
Click to collapse
In case of bootloop use odin and flash a stock rom.
Galaxy Ace 2 18160
Hi,
My son had this phone and rooted it, bricked it and dumped it. I would like to see if I can make it work again. It is hard bricked so the three button combo doesn't work. Can this be phone get working again?

Need help-Cant get into download mode even with usb jig

Hello I'm new to posting on these forums but I have been reading them for a while.
Anyway I installed cyanogenmod 10.1.3 on my captivate and every thing was working fine, until one day every time I would boot up the phone it would go straight to CWM recovery.
I put the phone into download mode using the 3 button combo, and decided I would just put it back to stock (I used this guide. http://forum.xda-developers.com/showthread.php?t=731989).
Well it finished doing its thing and I booted up the phone but it kept looping the, "att world phone" screen. So I tried putting the phone into download mode using the buttons, but every time I plug in the USB cable the battery icon shows up. I used all the combinations I could find, and nothing worked.,So I bought a USB jig.
Well when a plug in the jig nothing happens ( I even tried different batteries). I tested the jig on my friends focus flash and it works. I have a video below showing everything. I was hoping someone could help me out, it would be much appreciated. Thanks for your time
http://www.youtube.com/watch?v=_MiRrljbb4A
Have u tried to reboot to recovery and wipe data/factory reset, then reboot ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Have u tried to reboot to recovery and wipe data/factory reset, then reboot ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
The phone cannot boot into recovery, just keeps looping no matter what i do

[Q] No Recovery mode and No Download mode.

Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Categories

Resources