I've been debating waiting for the official Rogers ICS upgrade to get the new hboot or going S-OFF with the wire trick process.
I'm getting closer and closer to doing the wire trick, but seems like a slightly more dangerous process than I'm use to. I'm usually very happy to root/s-off my phones with software, but a little hardware trick seems like an extra step.
Was wondering how many fellow Rogers Raider users have taken the plunge and how many are waiting...
i did mine, im on rogers
so easy to install lets say darkrider rom with s-off
I did it on mine, wasn't bad at all
Bell RaiderRider here. Exactly same device as Rogers's. I SOFFed and it worked like a charm. I am also under Dark Raider.
Sent from my HTC Raider 4G LTE running ICS.
I spent an hour getting S-off. And I'm sure I made lots of wrong connections. Its fairly safe. If you carefull ull be fine. Follow the directions.
If you need to sim unlock. Do it before you flash other roms. My phone is rogers and I flashed to ICS and couldn't sim unlock. I had to flash back to stock so I could unlock to use with telus.
Sent from my HTC PH39100 using Tapatalk 2
Need of S OFF on HTC
Hey BRO,
A little update on HTC Vivid S OFF!!!!!!!
S OFF is very much necessary, if you wish to install Custom ROM's, Bcos without S OFF the kernel does not get flashed at all. I tried flashing various ROM's like DarkRaider, HOLICS, RumFloat etc... the ROM gets installed and you get the complete looks but certain hardwares does not work at all ( Wifi, Wifi tethering etc..) and even if the OC does not change!!!!!
Its very simple to do the S OFF and I have checked a lot of reviews who have done the S OFF, and so far I have'nt seen a case of getting the phone bricked.
I would like to share few things what I did for the S OFF.
I was basically on the AT&T Official ICS.
Step 1. I used the Hasoons All in one kit to unlock the bootloader as well as to install the recovery mode.
http://forum.xda-developers.com/showthread.php?t=1498003
Note: Do not use any other options from this tool other than unlocking bootloader and installing the recover CWM.
Step 2. Then I installed a custom rooted ROM eg: DarkRaider so far the best, RumFloat many u might find and make sure its for ICS alone.
http://forum.xda-developers.com/showthread.php?t=1586613
Step3. Simply fask the Custom ROM with the help of CWM and now your phone is fully rooted, please verify the same by installing a program which needs rot access like titanium backup etc..
Step4. NOW is the time when you can do the S OFF, why we installed customer ROM pre-rooted is because, we need the phone to be rooted before doing the S OFF.
Its very simple just follow the steps basically on the following site.
http://unlimited.io
1. Install the software mentioned on the above link according to your phone model and the computer OS.
2. Then RUN the program as a Administrator after connecting the phone via USB cable and make sure the USB debugging is turned ON on the phone.
3. The program will automatically detect the phone and the program will prompt you to do the wire trick. Without any hesitation go ahead and do the wire trick and you can see the message like phone is gonna reboot and then turn your phone and look on the screen and you can see the message S OFF.
Hope this must have helped you as well as increase your confidence in doing the hard wire trick!!!!!
After getting the S OFF!! Flash the Custom ROM and under software version if you check the kernel details, you will find the change!!!!
Eg: Before you do anything check and see the Kernel, you can see the stock ICS kernel even after flashing the Custom ROM.
Then I want you to check the Kernel details after flashing the custom ROM right after S OFF. then you will see the new kernel!!!!!!!!!
cool, thanks all, you've convinced me to take the plunge!
now i just need to find an insulated wire somewhere...
FOR HTC Vivid !!!!!!!
RLP06 said:
cool, thanks all, you've convinced me to take the plunge!
now i just need to find an insulated wire somewhere...
Click to expand...
Click to collapse
Yes !!! Go ahead and you will enjoy using your VIVID after S OFF!!!!!
s-off'ed now!
was sober still after 3 wire tricks and finally got it on the 4th, was almost ready to give up!
Congrats Bro!!
I haven't dared yet... but I will probably try soon
Any Rogers Raider got the problem as mine? (ICS/boot loop)
Hi, any rogers's Raider get the problem as mine, at this link
http://forum.xda-developers.com/showthread.php?p=26799179#post26799179
basically, it seems the SIM card not compatible for ICS.
I flash back to Roger's stock rom, them very thing works.
But I miss the cool sweep2wake under ICS.
+1
It was easy after READING The instructions a few times over to completely understand thew processes
for those who havent done the wiretrick yet, i figured id toss in my two cents.
i have the vivid and it was the night i got it or the next day that i finally went for it. and it wasnt as hard as i had thought. i know i messed it up a little the first time i tried it, and the phone wouldnt do anything, i panicked and thought i had bricked it, bc not even pulling the battery got the phone to boot, but then i made the connection again and the phone booted, it took another try or two before i got the s-off to work. but i, luckily, got everything working and have enjoyed it.
hope this helps somehow
priji85 said:
Hey BRO,
A little update on HTC Vivid S OFF!!!!!!!
S OFF is very much necessary, if you wish to install Custom ROM's, Bcos without S OFF the kernel does not get flashed at all. I tried flashing various ROM's like DarkRaider, HOLICS, RumFloat etc... the ROM gets installed and you get the complete looks but certain hardwares does not work at all ( Wifi, Wifi tethering etc..) and even if the OC does not change!!!!!
Its very simple to do the S OFF and I have checked a lot of reviews who have done the S OFF, and so far I have'nt seen a case of getting the phone bricked.
I would like to share few things what I did for the S OFF.
I was basically on the AT&T Official ICS.
Step 1. I used the Hasoons All in one kit to unlock the bootloader as well as to install the recovery mode.
http://forum.xda-developers.com/showthread.php?t=1498003
Note: Do not use any other options from this tool other than unlocking bootloader and installing the recover CWM.
Step 2. Then I installed a custom rooted ROM eg: DarkRaider so far the best, RumFloat many u might find and make sure its for ICS alone.
http://forum.xda-developers.com/showthread.php?t=1586613
Step3. Simply fask the Custom ROM with the help of CWM and now your phone is fully rooted, please verify the same by installing a program which needs rot access like titanium backup etc..
Step4. NOW is the time when you can do the S OFF, why we installed customer ROM pre-rooted is because, we need the phone to be rooted before doing the S OFF.
Its very simple just follow the steps basically on the following site.
http://unlimited.io
1. Install the software mentioned on the above link according to your phone model and the computer OS.
2. Then RUN the program as a Administrator after connecting the phone via USB cable and make sure the USB debugging is turned ON on the phone.
3. The program will automatically detect the phone and the program will prompt you to do the wire trick. Without any hesitation go ahead and do the wire trick and you can see the message like phone is gonna reboot and then turn your phone and look on the screen and you can see the message S OFF.
Hope this must have helped you as well as increase your confidence in doing the hard wire trick!!!!!
After getting the S OFF!! Flash the Custom ROM and under software version if you check the kernel details, you will find the change!!!!
Eg: Before you do anything check and see the Kernel, you can see the stock ICS kernel even after flashing the Custom ROM.
Then I want you to check the Kernel details after flashing the custom ROM right after S OFF. then you will see the new kernel!!!!!!!!!
Click to expand...
Click to collapse
ok so im gonna assume your step to s off is also sort of base from this forum " http://forum.xda-developers.com/showthread.php?t=1696424 " which is using the s off all in one tool kit by hasoon2000. according to this tool you need to have an empty sd card in the sdcard slot when runing the program. once its done it will promt me to do the wire trick (which is also showed in the video in this toolkit on how to do it) but in the video, the card is already removed when performing the trick. thats where i got lost... :/
I did mine also S-OFF
took almost 10 tries
so I guess it's safe
can anyone help me how u guys did it...
i have the s off all in one downloaded. im just confused on the part where u need to have an empty sdcard in my phone while running the program and doin the wire trick after when i saw the card is no more...
i'd really appreciate any help
RLP06 said:
cool, thanks all, you've convinced me to take the plunge!
now i just need to find an insulated wire somewhere...
Click to expand...
Click to collapse
Amen to that. It's ny turn to do it now Can I borrow your wire??
Sent from my HTC PH39100 using xda premium
I beleive the SD card should be inserted while doing this procedure!!!
RLP06 said:
s-off'ed now!
was sober still after 3 wire tricks and finally got it on the 4th, was almost ready to give up!
Click to expand...
Click to collapse
Ha, I had to do it like 20 times because I was only counting to 1. I used the cheapest wire I could find. Remember though, you can get away with using other ROMs if you want some stock ICS action.
Related
OK. I started out this adventure to root my phone because I want to use it as a wifi hotspot for my Ipad and not pay AT&T $50/month for that "privelage." I can't figure it out!!!
Phone Info. - Samsung Captivate with Froyo kb2 build. It has the 2.1 adroid when I got it then I updated to 2.2 through the Keis program when it was available.
Before anyone starts with "read and search" lecture, I'll tell you that I've been on this site for a combined 9 hours reading and searching and nothing seems to work. I've tried one-click root programs, I've installed a rooted version of my stock ROM, Ive downloaded more apps, files, or software programs than I can remember. I know how to get the phone into download mode and I know how to boot into recovery mode, but nothing works. Everything seems to come back to the 3e Recovery I have because when I think I am almost there, I get a failed signature error.
I tried the 3e Recovery Mod and that didn't seem to do anything. Is anyone out there willing to help me through this? I am not a programmer, and I don't have any android experience whatsoever, but I can follow direction and am willing to learn. Everytime I find a new thread I seem to get more confused because I'm unclear on the jargon being used, or the thread is on a different ROM or phone so I don't know if it will work. I know "brick" is a bad thing so I don't want to do that.
I any of the experts had my phone what would you do? Do you need more information from me? Also, once I get this figured out, I'de love some recomendation on a better, faster ROM to install.
ANY HELP WOLD BE GREATLY APPRICIATED. Sorry for the frustration.
When I was on the Official Froyo 2.2 the first thing I used to successfully get root was this... View attachment SuperOneClickv1.6.5-ShortFuse.zip
This version was the only one at the time that would work. Extract it and run the SuperOneClick application. Be sure to have the usb debugging on.-- Menu /Settings /Applications /Development /then check the USB debugging.
Hmmmm.....very odd. Froyo is super easy.
Do you have Super User showing up in the apps drawer?
AND DON'T USE KIES ANY MORE FOR UPDATING !! YOU CAN BE IN FOR NASTY SURPRISES.
Been there. I'll try it again, but I think it still can't get around the 3e verification stuff. I'll let you know.
No SuperUser as of yet. I guess that is the point. Once I get rooted, I should get SuperUser status.
DaytonGuy said:
Been there. I'll try it again, but I think it still can't get around the 3e verification stuff. I'll let you know.
Click to expand...
Click to collapse
That requires a custom kernel
*Get Chance and Luck*
DaytonGuy said:
No SuperUser as of yet. I guess that is the point. Once I get rooted, I should get SuperUser status.
Click to expand...
Click to collapse
After u try the SuperOneClick from my previous post, reboot ur phone and then see what u have.
After nearly 9 hours of trying...I have cracked this thing. Turn out there were two threads about the 3e recovery mod. I tried the manual thread with no success. I just found this one that has a one click script to do it.
http://forum.xda-developers.com/showthread.php?t=833423
Once I did that, I used Captivate One Click Root and presto....I now have SuperUser permissions. Sweet.
Thanks to everyone that responded to my questions. I'm sure I'll have more about ROMs and such.
^ Good deal. Glad u got it.
I figured I would be back.
Anyone have a link to a clear explaination on how to CID unlock the Captivate? A video would be fantastic, but I know how that goes. Also, is there a way to tell if it is unlocked or not?
Thanks
DaytonGuy said:
I figured I would be back.
Anyone have a link to a clear explaination on how to CID unlock the Captivate? A video would be fantastic, but I know how that goes. Also, is there a way to tell if it is unlocked or not?
Thanks
Click to expand...
Click to collapse
Maybe this: http://forum.xda-developers.com/showthread.php?t=872455
If you want to go with this - BACK UP YOUR nv_data.bin TO YOUR COMPUTER as soon as you can. DON'T LEAVE IT ONLY ON THE PHONE !!!!
Or have you heard of Samsung Tool v10.7...... here: http://forum.gsmhosting.com/vbb/f45...orld-just-one-more-revolution-update-1327536/
Register and go to "Download Area"
Jesus....tht will have to wait. That looks pretty complicated..... lol
I'll see what I can do later this week.
Thanks!
Galaxy s unlock in the market.
Use the option to back up, then after copy the galaxys unlock folder on your sdcard to your PC someplace safe...
Galaxy s unlock in the market.
Use the option to back up, then after copy the galaxys unlock folder on your sdcard to your PC someplace safe...
Click to expand...
Click to collapse
I tried that early on because it looked so easy. All I get is "Sorry, no codes found unknown error" Is there a way to tell if I'm CID unlocked or not? I haven't done that yet that I know of. I did click the unlock button is Super One Click, but it did nothing. By that I mean the program, nor the phone seemed like anything happened. Early on in this process I found the completly rooted version of my stock Froyo 2.2 and installed that on my phone thinking that it would root the phone. Later realized it doesn't work like that. How do I check the CID lock? I'de like to try one of these cool ROM's I keep reading about.
unless you are planning on running the captivate on another carrier, you dont need to unlock it.
I was under the impression that I needed to CID unlock the phone to flash any ROM not produced or signed by the carrier. I thought SIM unlock was what allowed you to take the phone to another carrier?
As you can see, I know enough to be dangerous, but I'm slowly learning.
DaytonGuy said:
I was under the impression that I needed to CID unlock the phone to flash any ROM not produced or signed by the carrier. I thought SIM unlock was what allowed you to take the phone to another carrier?
As you can see, I know enough to be dangerous, but I'm slowly learning.
Click to expand...
Click to collapse
CID unlocks do not apply to Samsung phones.
once you have a kernel that has CWM built into it, you can start flashing. nothing else required. you dont even need root if you arent planning on using something like titanium backup before you flash.
Cool.
So any recomendations on my first custom ROM install?
I tried installing a custum boot animation last night and had no luck. I used CWM to flash the file I downloaded, but no change. I tried to copy a new customanimation.zip (I think that's what it's called I'm going from memory here) but I don't have RW access to the System folder. I tried using CWM to mount system and then fix permissions through recovery mode, but that doesn't do it. I'm using Droid Explorer to copy the file but it won't copy. There is a customamination.zip file in system/media so I tried to rename it .zp and it won't take. I assume that is a permissions thing.
I guess I'll try Root Exploer from the market. People seem to be having luck with that.
you cant use a bootanimation.zip on a stock kernel. It just be enabled in a custom kernel.
Go read some more bro. A LOT MORE.
OK. so it looks like I downloaded a custom animation zip file, but I need to flash a kernel that allows me to use the anmation. I ran across a post about that so I can find it.
Was was confusing to me was the uploader of the animation called it "flashable" so I thought that was the kernel and all, but I'm now guessing that by flashing it it simply installed it into the system/media folder for me???
Still looking for any suggestions for my first ROM.
Right now I'm following the excellent guide on this forum to root my vivid.So far I my bootloader is unlocked and I'm on s-off part. The guide links me to another forum that says I need to use insulated wire to touch two certain points while running a program. It says the wire has to be a certain gauge and has a video to demonstrate the process. I have run into two problems, however.
The video that is linked has no sound. I don't know if this is a glitch or an act of YouTube or just how the video is. I'm afraid to attempt this knowing I could be missing some important info.
My second issue is that he never actually says what gauge is needed for wire. I take it this is Tue kind of thing I can get at best buy, right?
sugarshock said:
Right now I'm following the excellent guide on this forum to root my vivid.So far I my bootloader is unlocked and I'm on s-off part. The guide links me to another forum that says I need to use insulated wire to touch two certain points while running a program. It says the wire has to be a certain gauge and has a video to demonstrate the process. I have run into two problems, however.
The video that is linked has no sound. I don't know if this is a glitch or an act of YouTube or just how the video is. I'm afraid to attempt this knowing I could be missing some important info.
My second issue is that he never actually says what gauge is needed for wire. I take it this is Tue kind of thing I can get at best buy, right?
Click to expand...
Click to collapse
The video is like that it is meant for you to visually follow the instructions. You have to just do everything the instructions tell you. And the video watch it like 2 times.
Also when doing the wire trick you need to make sure an SD card that is already formatted for your phone is inserted
Ppl think you are supposed to touch o e end to the first little dot then the other end once to the little piece of metal on top of the SD card. But its 1 end to the first part hold it and the other end you need to touch it once for a second then again for another second and it should work... If it doesn't work and you get something like soft failed with other text before it then that means you just didn't do the wire trick correctly... Just do it again it might take you many tries before you achieve s off...
Hope this was help full
Sent from my HTC PH39100 using XDA
wow, I'm glad I asked here before trying or I probably would never get it right. another question. I just bought an SD card and popped it in. How do I make sure its formatted for my phone? Just delete everything on it or is it ready to go?
Thanks for the help!
sugarshock said:
wow, I'm glad I asked here before trying or I probably would never get it right. another question. I just bought an SD card and popped it in. How do I make sure its formatted for my phone? Just delete everything on it or is it ready to go?
Thanks for the help!
Click to expand...
Click to collapse
Try to plug in your phone to the computer and turn on USB storage and if the SD card pops up then it works but I think when you do turn on USB storage it will ask you to format and before this just check I your phones storage see if it shows up there
Sent from my HTC PH39100 using XDA
cool. What about the gauge. Does it have to be really small or is it specific? Is insulated wire any kind of wire that has a plastic cover? I have some spare wire from when I hooked up my surround sound system, I wanna make sure its Tue right kind. sorry for so many questions, I just wanna make sure I don't brick my phone. I really love this thing!
..
sugarshock said:
cool. What about the gauge. Does it have to be really small or is it specific? Is insulated wire any kind of wire that has a plastic cover? I have some spare wire from when I hooked up my surround sound system, I wanna make sure its Tue right kind. sorry for so many questions, I just wanna make sure I don't brick my phone. I really love this thing!
Click to expand...
Click to collapse
Does not matter at all. I did it with an uninsulated paperclip; I've heard of people doing it with twist-ties.
ARGH! Ok, so I downloaded the program and got the wire ready, but when I try to run controlbear.exe as admin, it says no root detected and forces me to exit! If I'm supposed to do this AFTER I root, why does the superguide tell me to do it BEFORE I root?
Am I missing something?
sugarshock said:
ARGH! Ok, so I downloaded the program and got the wire ready, but when I try to run controlbear.exe as admin, it says no root detected and forces me to exit! If I'm supposed to do this AFTER I root, why does the superguide tell me to do it BEFORE I root?
Am I missing something?
Click to expand...
Click to collapse
Kind of. I'll break it down into simple steps for you on how it's written in the superguide.
- Bootloader unlock (not rooted)
- flash WCXrecovery (roots the phone)
- S OFF
- Update HBOOT
- flash WCXrecovery once again
The superguide does tell you to do s off AFTER root.
You are talking about the command "fastboot flash recovery wcxrecovery.img" right?
I did do that before running the program. I've tried it twice with the same results.
When I enter the command, it says it worked but something must be wrong.
EDIT
Tried a third time, still no luck. Here is a step by step of what I'm doing:
1. Power off phone and get in to fastboot. Connect to pc and in cmd I enter fastboot flash recovery wcxrecovery.img, the command is executed successfully.
2.Right click ControlBear.exe and run as Admin.
3. Program auto-reboots my phone. When it's fully rebooted it says something like:
Backing up.....
No root detected in backup!
Secondary backup FAILED!!
press ENTER to exit.......
..
I'm pretty sure I'm running stock ICS. In one of my previous attempts at rooting I attempted to change it, but I doubt it worked. Is there a way to check?
EDIT
So I'm just gonna try flashing to stock ROM anyway. Which one of the downloads do I select?
RUU_HOLIDAY_ICS_35_S_Cingular_US_3.26.502.52_Radio_3.02.4740.14_34.22.701040.19L_release_243350_signed.exe
OR
RUU_HOLIDAY_ICS_35_S_Cingular_US_3.26.502.56_Radio_3.02.4740.14_34.22.701040.19_release_246712_signed.exe
They are both ICS, Cingular is supposed to work for my AT&T Vivid, so what do I choose? Here's the link:
http://www.filefactory.com/f/002b74e0f4775869/
..
sugarshock said:
I'm pretty sure I'm running stock ICS. In one of my previous attempts at rooting I attempted to change it, but I doubt it worked. Is there a way to check?
EDIT
So I'm just gonna try flashing to stock ROM anyway. Which one of the downloads do I select?
RUU_HOLIDAY_ICS_35_S_Cingular_US_3.26.502.52_Radio_3.02.4740.14_34.22.701040.19L_release_243350_signed.exe
OR
RUU_HOLIDAY_ICS_35_S_Cingular_US_3.26.502.56_Radio_3.02.4740.14_34.22.701040.19_release_246712_signed.exe
They are both ICS, Cingular is supposed to work for my AT&T Vivid, so what do I choose? Here's the link:
http://www.filefactory.com/f/002b74e0f4775869/
Click to expand...
Click to collapse
Or, you can download it directly from HTC
Page: http://www.htc.com/us/support/htc-vivid-att/software-updates
Direct link: http://dl3.htc.com/application/htc_vivid_att_RUU_3.26.502.56_US.exe
Thanks for the replies, I'll check the website out when I get home. My Hboot version 1.85.0025 if you still want to know.
..
sugarshock said:
Thanks for the replies, I'll check the website out when I get home. My Hboot version 1.85.0025 if you still want to know.
Click to expand...
Click to collapse
Hi,
I am having the exact same issue on my ATT HTC Vivid. Stuck at exactly the same step.
Did you resolve the issue?
Please help.
Thanks,
Bhavin
bhavinjo said:
Hi,
I am having the exact same issue on my ATT HTC Vivid. Stuck at exactly the same step.
Did you resolve the issue?
Please help.
Thanks,
Bhavin
Click to expand...
Click to collapse
Hi sugarshock,
I had exactly the same error as u with same hboot version.
Do this
goto http://forum.xda-developers.com/showthread.php?t=1498003
and download the tool
only perform recovery for ICS and then perm root
viola no more error message from control bear about root...
hope that helps...
I am not meaning to high jack this thread, but i just had a quick question, I only want root for things like freezing bloat, and on the off chance I decide to trade my Vivid for another phone i have 29 days left to make up my mind. Anyways if I flash WCX Recovery does the stock rom become rooted?
kleeman7 said:
I am not meaning to high jack this thread, but i just had a quick question, I only want root for things like freezing bloat, and on the off chance I decide to trade my Vivid for another phone i have 29 days left to make up my mind. Anyways if I flash WCX Recovery does the stock rom become rooted?
Click to expand...
Click to collapse
Yes, if u flash the rooted stock version
Sent from my HTC PH39100 using Tapatalk 2
Roadmap to Custom ROM
1.Unlock Bootloader from htcdev.com.
2.Flash a multi hboot recovery.
3.Root using the permanent root solution flashed via recovery, found here.
4.Flash S-OFF Hboot from unlimited.io.
5.Flash custom ROM with no problems.
To check your Unlock Token, Flash Recovery and S-OFF you should use the tool provided by me here .
This is the easiest guide to follow.. I'm also using this step to install custom Rom on my SXL before I got One X.. I'm also don't get it.. why people don't use unlimited.io trick.. it easier for me.
BTW.. it good to see a new dev for sxl.. it a good device.. but lack of developer.. wish you good luck with your project.
Sent from my HTC One X using Tapatalk 2
Agreed.
I've flashed on a lot of devices and the SXL guides are all a bit random.
The info is out there but sometimes you need to dig a lot to find it.
And a lot are out of date.
Hope this becomes the go-to guide for everyone and hope to see some dev work happening.
I think its time to move on for me..... getting flash withdrawal.
Prof Peach said:
Agreed.
I've flashed on a lot of devices and the SXL guides are all a bit random.
The info is out there but sometimes you need to dig a lot to find it.
And a lot are out of date.
Hope this becomes the go-to guide for everyone and hope to see some dev work happening.
I think its time to move on for me..... getting flash withdrawal.
Click to expand...
Click to collapse
I'm just getting familiar with the forum and the device (almost 4 days since i bought it).
Soon enough if i have time (back2school), i will try to work on CM9 or CM10, depends, CM9 seems the obvious road to take as some work was previosly made by [vertigo], and some fixes are needed (he said that are kernel related), so i think i will try to fix his CM9 rather than port it again form scratch.
As for CM10, i think the best road to take is to compile AOSP JB from source and edit the kernel so it likes the jelly flavour.
If everything works as intedend, in a couple of months we should see both CM9 and JB/CM10 up and going.
(The worst thing is that i will surely need help, i think i can find around the forum, some testers already enrolled to the call to arms thread, so maybe we can build up a team., i really like this device )
I will say that some of the guides are if you were on a GB rom, and then installing a custom rom wasn't so easy, but since the upgrade to ICS it has become a lot easier, although I had noticed that it is easier to softbrick the phone if you don't flash the chinese boot.img and then chinese rom. Also s-off isn't essential for flashing custom roms...
[vertigo] said:
I will say that some of the guides are if you were on a GB rom, and then installing a custom rom wasn't so easy, but since the upgrade to ICS it has become a lot easier, although I had noticed that it is easier to softbrick the phone if you don't flash the chinese boot.img and then chinese rom. Also s-off isn't essential for flashing custom roms...
Click to expand...
Click to collapse
Well, i'm fairly new to this device, but from what i've learned, the chinsese rom is optional if you have s-off, as s-off let's you to access all the partitions, system and other things you need.
Maybe i'm wrong, that's why i've started this thread, i think this is easier, and softbricking a phone with Android seems almost impossible to me...as i said, to me
Yeah I know the chinese rom is optional, but as I said from my point of view, once I'd flashed the chinese rom, I didn't manage to softbrick the phone where as before when I was trying various ports I managed to softbrick it a few times. Just my opinion and what I'd noticed with my device...
As for s-off mine (although broken) is still s-on and I've never felt the need to make it s-off. Again just my opinion
[vertigo] said:
Yeah I know the chinese rom is optional, but as I said from my point of view, once I'd flashed the chinese rom, I didn't manage to softbrick the phone where as before when I was trying various ports I managed to softbrick it a few times. Just my opinion and what I'd noticed with my device...
As for s-off mine (although broken) is still s-on and I've never felt the need to make it s-off. Again just my opinion
Click to expand...
Click to collapse
Well, i know what youre pointing at, i was just wandering when i first read te forum, why on earth should i install a Chinsese ROM when i will change it anyways for a new ROM...so the boot.img is a different one in the custom one, and other things.
I'm not so expeirenced with S-Off/On, as this is my first HTC phone i have and changed ROM (not too many HTC's in my area), but from what i've read online, S-Off is the best road to take to ensure you don't softbrick your phone, as you have the real "Full Control" over the Device and the ROM parts you can flash, like you, this is my opinion, a begginers opinion
Double Post because reedited thread
Hi Lexmazter,
Thanks for making this guide, it is easy to follow. But I'm stuck at a small point and face below response; -
>>>>>>>>>>>>>>'fastboot' is not recognized as an internal or external command, operable program or batch file.<<<<<<<<<<<<<
Please let me know where did I do wrong? Thanks.
My steps were: -
factory reset
root via DooMLoRD_v4_ROOT
titanium backup worked and restore all apps and settings
unclocked the bootloader from htcdev.
all data gone, no more, like factory reset again
superuser app still exist, didn't root again
booted and rooted as you said
connect PC to phone via USB in charge mode only.
run your tool
doing select 5 Flash HBOOT S-OFF Unprotected (via adb) - choose hg hi both failed - but face above message 3 repeat lines.
reboot to bootloader FASTBOOT, >>>>>USB<<<<< appear
UNLOCK at top also appear
then select 4 Flash Recovery. (via fastboot) - then choose rei reg both failed - but face above message. 1 line.
Hope can teach me, thank you very much in advance.
And I'm sure I didn't do something right before hand.
cx5 said:
Hi Lexmazter,
Thanks for making this guide, it is easy to follow. But I'm stuck at a small point and face below response; -
>>>>>>>>>>>>>>'fastboot' is not recognized as an internal or external command, operable program or batch file.<<<<<<<<<<<<<
Please let me know where did I do wrong? Thanks.
My steps were: -
factory reset
root via DooMLoRD_v4_ROOT
titanium backup worked and restore all apps and settings
unclocked the bootloader from htcdev.
all data gone, no more, like factory reset again
superuser app still exist, didn't root again
booted and rooted as you said
connect PC to phone via USB in charge mode only.
run your tool
doing select 5 Flash HBOOT S-OFF Unprotected (via adb) - choose hg hi both failed - but face above message 3 repeat lines.
reboot to bootloader FASTBOOT, >>>>>USB<<<<< appear
UNLOCK at top also appear
then select 4 Flash Recovery. (via fastboot) - then choose rei reg both failed - but face above message. 1 line.
Hope can teach me, thank you very much in advance.
And I'm sure I didn't do something right before hand.
Click to expand...
Click to collapse
Extract the contents of the archive in C:/ and try again, it is most likely because you are running from a folder that has spaces (" ").
Thanks for replying so quickly, some questions before sleep tonight.
I moved the folder to c:\xmtool and run as administrator as usual. But without connecting the phone, and select 5 flash H boot. The 3 repeat message appear still. Hahah, may be I want to test in theory.
Anyway, reading more more other post and try again this weekend.
Thanks !!!! many of your post and reply has been insightful.
Can someone advise me on whether it is possible to update to the new Rom without the use of a USB.
My g\f's phone doesn't have usb its bust for some reason.
Is there any other way to load the latest 5.0 cwm, the new bootloader and then install a zip from cwm.
Any help is much appreciated.
Sent from my LG-P990 using xda app-developers app
monkeyass said:
Can someone advise me on whether it is possible to update to the new Rom without the use of a USB.
My g\f's phone doesn't have usb its bust for some reason.
Is there any other way to load the latest 5.0 cwm, the new bootloader and then install a zip from cwm.
Any help is much appreciated.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
1) You should clarify the title. Something like "How to update to v28E without USB". Imagine every thread like "LG P990 question", it's absurd.
2) You should tell us if you want the vlite or the full version of v28E.
3) CWM 5.0 is not the latest.
4) Yes, it is possible, put everything in the sd card =P.
Good luck.
Hello, apologies for that.
Thank you for the fast response.
I would like to install the full version, I am aware that you need to specifically partition the ad, but I can read grains thread for that.
Can I just confirm then, that if there is a zip for the new downloader, cwm and Rom in one zip.
That can be run from cwm?
Thank you
Sent from my LG-P990 using xda app-developers app
monkeyass said:
Hello, apologies for that.
Thank you for the fast response.
I would like to install the full version, I am aware that you need to specifically partition the ad, but I can read grains thread for that.
Can I just confirm then, that if there is a zip for the new downloader, cwm and Rom in one zip.
That can be run from cwm?
Thank you
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
First -- In case you want to go full metal on P990, that means repartitioning, new BB and full flash, you need to flash. There is no other way than using NVFlash, as described in lovely thread in development by Stephan G.
Reasons - reformatting is not easily done from within phone which runs on these partitions, same goes for reflashing recovery from within recovery.
Second -- not sure why without USB?
Third -- there is CWM-possible way by using TonypAndHarsh's vlite V28E rom, yet this goes without new BB and with possibility of no call audio issue.
So, to repeat my answer to your main point, no. There is no way to fully install new system/BB without USB connection and PC. You have to flash it.
Hello. I think you can instal the new ICS without your usb cable.
1. you need to instal rom manager from PlayStore and flash from here the CWM recovery. I recomend you to instal the version 5.2.0
2. Make a nandroid backup before you do something to your actual rom.
3. Use titanium backup to backup all your apps and settings.
4. Put ICS rom from here http://forum.xda-developers.com/showthread.php?t=1959545 in your sd card (i think you have at leat a card reader and on adapter to put your microsd card) and follow the isntruction from the download page.
Good luck!
Cool thank you will try tomorrow.
Ant
Sent from my LG-P990 using xda app-developers app
ergosum said:
1) You should clarify the title. Something like "How to update to v28E without USB". Imagine every thread like "LG P990 question", it's absurd.
2) You should tell us if you want the vlite or the full version of v28E.
3) CWM 5.0 is not the latest.
4) Yes, it is possible, put everything in the sd card =P.
Good luck.
Click to expand...
Click to collapse
I'm sorry but I disagree with you... I think that anyone that thinks about the title for 2 seconds can understand that if the guy is asking if it's possible to flash v28e without USB of course he means the "full" stock ICS leak, the one which requires you to redo your partitions and whatnot... the one that is only possible through nvflash, thus, it is not possible to update to v28e without USB.
Or, you could just reply... hey, it's not possible to flash "the real deal", but you can flash tonyp's "lite" version, which uses the old bootloader and a patched kernel (thus some bugs might come from that) and all you need to do is put the files in the sd card...
I don't know why you had to be so "blunt"...
LarsPT said:
I'm sorry but I disagree with you... I think that anyone that thinks about the title for 2 seconds can understand that if the guy is asking if it's possible to flash v28e without USB of course he means the "full" stock ICS leak, the one which requires you to redo your partitions and whatnot... the one that is only possible through nvflash, thus, it is not possible to update to v28e without USB.
Or, you could just reply... hey, it's not possible to flash "the real deal", but you can flash tonyp's "lite" version, which uses the old bootloader and a patched kernel (thus some bugs might come from that) and all you need to do is put the files in the sd card...
I don't know why you had to be so "blunt"...
Click to expand...
Click to collapse
Thank you for that information, I am currently trying to find out if there is a way to install the right version of CWM, then try to install the new bootloader from within CWM? I am not even sure if that is possible.
I think she is just going to have to get her phone sent back, the only problem is the o2x is discontinued, I doubt they will replace it or fix it. They will probably try and replace it, but only give her something that I wouldn't consider a good replacement. But we'll have to speak to her insurance company first.
I have seen these phones selling on ebay, they are about £100 from what I can gather, it depends what she wants to do. Could buy a new one and sell her one, just a shame really, i found another thread about the USB problem and they had to send it back and get it repaired, must be either a problem with the connection or the board, I would think the board as it charges fine, which is really weird.
Anyway, thank you for you help, i will keep searching to see what i can find.
monkeyass said:
Thank you for that information, I am currently trying to find out if there is a way to install the right version of CWM, then try to install the new bootloader from within CWM? I am not even sure if that is possible.
I think she is just going to have to get her phone sent back, the only problem is the o2x is discontinued, I doubt they will replace it or fix it. They will probably try and replace it, but only give her something that I wouldn't consider a good replacement. But we'll have to speak to her insurance company first.
I have seen these phones selling on ebay, they are about £100 from what I can gather, it depends what she wants to do. Could buy a new one and sell her one, just a shame really, i found another thread about the USB problem and they had to send it back and get it repaired, must be either a problem with the connection or the board, I would think the board as it charges fine, which is really weird.
Anyway, thank you for you help, i will keep searching to see what i can find.
Click to expand...
Click to collapse
Just cause you didnt mention it before, but are you running a hacked version of ICS right now on the phone? If you are, it could be a matter of the ADP drivers on your computer? If it was a stupid idea sry. It was just something that pop'd into my head
headshot21 said:
Just cause you didnt mention it before, but are you running a hacked version of ICS right now on the phone? If you are, it could be a matter of the ADP drivers on your computer? If it was a stupid idea sry. It was just something that pop'd into my head
Click to expand...
Click to collapse
Unfortunately not, it is running a version of gingerbread, can't remember which one.
monkeyass said:
Unfortunately not, it is running a version of gingerbread, can't remember which one.
Click to expand...
Click to collapse
I got a bug on my O2X USB as well, and I managed to solve it temporary, (the bug comes back after some time, but the process has worked for me everytime the bug comes back, I'm currently testing to try to identify the cause of the bug), it is kind of a long process but I could get back my usb sync, if you want I made a tutorial of what I exactly did, after this process you can install any stock or custom rom without any problem just make sure to follow the instructions as they are described
http://forum.xda-developers.com/showthread.php?t=1981359
ocr66 said:
I got a bug on my O2X USB as well, and I managed to solve it temporary, (the bug comes back after some time, but the process has worked for me everytime the bug comes back, I'm currently testing to try to identify the cause of the bug), it is kind of a long process but I could get back my usb sync, if you want I made a tutorial of what I exactly did, after this process you can install any stock or custom rom without any problem just make sure to follow the instructions as they are described
http://forum.xda-developers.com/showthread.php?t=1981359
Click to expand...
Click to collapse
Thank you, tried your fix but unfortunately didn't work, looks like it will have to be sent back.
thank you though
monkeyass said:
Thank you, tried your fix but unfortunately didn't work, looks like it will have to be sent back.
thank you though
Click to expand...
Click to collapse
Too bad to hear it didn't worked, do you mind if I ask, what exactly failed? I mean, it would be great to have some feedback of what you did and where you got stuck, so I might make some updates of the post, or upload another backup, or so
If you have any doubt about my post, I would be pleased to help you with that
thanks for giving it a try
cheers
Hi
I downloaded a stock Rom that had been modded.
So I could be sure that I would have cwm in case anything went wrong.
Rom loaded and was able to get into the secret menu.
I will say that under USB connection type there was misspelling where it said:
LG USB adnroid
Not sure if that would affect it.
I selected that item.
Then went to port.
Selected the different options in ordered and waited about 10 seconds on each turn, then pressed find any changes in device manager unplugged and plugged the USB.
Then tried in different orders but with not luck.
Took the battery out and tried holing the vol up down the plugging in USB but to no avail.
Then pressed power and vol down.
The phone tuned on and showed LG sign then switched off.
I tried pressing check any changes as the LG sign came on but nothing.
Then tried nvflash as the LG sign came on but nvflash showed no connection.
Very weird, definitely dead but still charges, doesn't make sense.
Oh well
Ordered an atrix with work and play kit for 68 quid, has a broken digitizer which will cost 20 pound, on average, off ebay.
Thanks for the help though.
May take the 2x apart when new phone comes and see if there's any physical damage on te board.
Sent from my LG-P990 using xda app-developers app
Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Linkalex1 said:
Hi, I did a lot of things with my One Mini 2 and I actually really don't know what to do anymore... So much options and yet there always seems to be a problem. Let me explain everything.
What I did:
-flashed a custom rom, then went back to a stock rom of this forum
-flashed the dt2w kernel, it messed up my phone so I then flashed the liberty one, which worked
But with the liberty one I had some memory problems, for exemple I couldn't take screenshots... That's why I decided that I wanted to put my phone just as it was when I bought it, I really hope that's possible, by that I mean having official firmwares etc, therefore being able to do official upgrades from my phone (is that what OTA is?).
I looked on internet and it looks like what I need is RUU, as it includes everything (from what I understood)... I know a lot of threads were made about this, but quite a few months ago, so that's why I'm making a new one, and to make things clear.
Also, I downloaded an official kernel from htcdev.com, but each time I tried flashing it with TWRP, it "failed".
So, if you guys have an answer, solution or, in best case, the actual RUU, that would be great.
Thanx
Click to expand...
Click to collapse
Still no RUU's avaiable as HTC wont release them. your best option is to use TWRP backup and restore.
Original stock backup
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Linkalex1 said:
Thank you, but my backup kind of disappeared... I saw your post where there was the "HTC Original Backup.zip", I tried to flash but again it failed... Am I supposed to flash it as a backup?
Click to expand...
Click to collapse
You need to send it as it is to your phone and use TWRP > restore. choose file and done.
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Linkalex1 said:
Thanx so much for answering... I uses the backup you told me to. Although I had to use the "install" option instead of the backup one, it now works perfectly! But how do I know if my phone is "official"? Are the upgrades going to be made straight from the phone?
Click to expand...
Click to collapse
Yes OTA updates should work just fine. just look for updates in settings>about >software update.
you may have one for polaris office.
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
arm1e said:
Hi, I just want to check this too before I screw up wife's phone..
She has CM12 on her phone now as I replaced recovery as well as unlocking bootloader. Now she wants it back to stock as too many things crash on her. I get that I can install your backup but what worries me is that other posts have said you need the stock recovery to allow for OTA updates to work and the link to this no longer works.
She MUST have OTA updates or my balls will be removed, so can you please confirm this, but also explain why.
Thanks (on behalf of my testicles and unborn children!)
(Oh, and she wants it unrooted ant the bootloader relocked)
Click to expand...
Click to collapse
Stock Recovery
To unroot just lock bootloader:
fastboot oem lock