Hi, I have a G1 rooted with the SuperD 1.9.3 Rom, I never partitioned my SD card or anything like that. I want to upgrade my SD Card and partition it to get Apps2SD and keep the same Rom. I am not sure what steps to take...
lmt125 said:
Hi, I have a G1 rooted with the SuperD 1.9.3 Rom, I never partitioned my SD card or anything like that. I want to upgrade my SD Card and partition it to get Apps2SD and keep the same Rom. I am not sure what steps to take...
Click to expand...
Click to collapse
Which recovery do you have? If you don't yet, make sure to upgrade to Amon_Ra latest. Once you have that, reboot into recovery, select partition card and follow directions on screen. This will wipe your card completely so backup anything you want to save. It will not affect your rom in any way. You may have to move your existing apps manually, not sure.
How do i know what recovery i have? Do I partition my current sd card or the new one?
So I do not need to reflash the Super D?
lmt125 said:
How do i know what recovery i have? Do I partition my current sd card or the new one?
So I do not need to reflash the Super D?
Click to expand...
Click to collapse
You would boot into recovery and look to see which one you have, it will say it right on top. You will partition your new card. Absolutely no need to reflash your rom, it will recognize your ext partition and install all future apps in it automatically. As I said, I'm not sure about existing apps, you may need to move them manually.
It says Android Sysem Recovery Utility Build: JFv1.42 There is nothing that says Partition SD or anything like that... Now my rom is on my current sd card if I don't flash it to the new one my phone still knows what rom I have? Sorry about all the questions thanks for your help =)
I was thinking of doing this to install Amon RA's recovery img
I got it from another forum in here....
Copy recovery-RA-dream-v1.7.0.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
select console from the menu
#mount -a (this can give back an error if you don't have an ext partition, don't worry about it and just proceed)
#flash_image recovery /sdcard/recovery-RA-dream-v1.7.0.img
JF's recovery does not have that option because it's really, really, really old. We did not even have apps to sd back then.
Flash RA's recovery (directions seem right, I assume you got them out of RA's thread), you'll see the difference: many more options, etc
Good luck.
Ok, so I am going to do the following steps....
1. Flash Amon Ra's recovery image
2. Reboot phone
3. Get into recovery again
4. Back up my sd card on the computer, remove sd card from phone
5. Insert new sd card, partition sd card
6. Transfer files from old sd card including update.zip which is the rom
7. Reboot phone
Let me know if I'm missing something thanks for all your help!
I'm going to do this over the weekend...
Ok, so I got the new Amon RA recovery image but haven't done anything else...lol. So can you tell me if those steps are right? And why don't I need to flash the rom again...I currently have it on my sd card...I'm a bit confused
1. Reboot to recovery. Partition your card (I suggest 512mb for ext partition, rest is fat, follow instructions within recovery).
2. Upgrade ext to ext3.
3. Reboot (your phone will move your existing apps onto sd.) It may take a while to fully boot, just give it 10 min or so.
4. In terminal emulator type
Code:
su
fix_permissions
5. Reboot again.
5. Transfer whatever you had on your old sdcard (music, pics, etc) onto your new card.
As far as flashing the rom again.... why? Your OP says you want to keep your existing rom.
To check if your apps were moved:
In terminal:
Code:
su
ls /system/sd/app
ls /system/sd/app-private
ls /system/sd/dalvik-cache
Should give you print-out of what you have on ext partition of your sdcard (or you can use root explorer or whatever other file manager, I'm a bit old shool so I prefer terminal or adb)
5. Reboot again.
5. Transfer whatever you had on your old sdcard (music, pics, etc) onto your new card.
Okay in step 5. Reboot again do I just type in the terminal emulator reboot or reboot recovery?
Also when you say "transfer whatever you had on your old card..." Do I also transfer the file that says update.zip?
Sorry for all the questions, I should be getting my new sd card today and will try it out tonight.
Thank you.
You just type reboot.
It is up to you what you want to transfer onto your new card. I assume that update.zip is your current rom. If so, it's nice to have just in case but it will not make any difference in how the phone works. It's just an install file that you use once (unless, of course something goes terribly wrong and we all have been there ) but it's nice to have all tools needed on your card so you can quickly recover from any problems.)
BTW, with your new shiny recovery (RA1.7), you don't have to rename your files to update.zip. You can name them whatever you want (i.e Super-D1.9.3.zip, Recovery.zip) and, if you decide to reflash something, at least you will know what it is. Your new recovery will let you choose which file to flash so you can have more then one .zip file on your card if you want.
Ok so I still haven't gotten my new card! It should be here next week...Anyways I tried using switchrom to store my current just in case but I get this error Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)
Any clues why I'm getting this do I need to have my phone connected by USB or something to a computer....?
Thanks hopefully I'll stop asking so many questions...I tried this solution but no luck
Originally Posted by siraf View Post
Guys, I just had this problem too .. at first i was so devastated. I'm glad i solved it.
I don't know if my solution is the ultimate solution or not but you guys can give it a try.
problem :
"E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)"
In the Android System Recovery, select "USB-MS Toggle". It will enabled/disable the feature. Do it one more round and it will solve the problem.
It's telling you that it can't mount SD card.
Back up all of your stuff from SD card, format it and try again, that's the only thing I can think of.
Actually, I just ended up doing a Nandroid Backup just did Nandroid not Nandroid +ext since I don't have this card partitioned...it is backed up!
Ok buddy its easier if you do the whole process through the sdcard
First you should backup everything on your sdcard and do a BART or NAN+EXT then partion your card and restore your BART or NAN+EXT and your good to go
If this does not work press my name and look at my threads because I ask this same quetion a while ago
Post again if this does not work
Sent from my HTC Dream using Droidfreeks's App
DroidFreek said:
Ok buddy its easier if you do the whole process through the sdcard
First you should backup everything on your sdcard and do a BART or NAN+EXT then partion your card and restore your BART or NAN+EXT and your good to go
If this does not work press my name and look at my threads because I ask this same quetion a while ago
Post again if this does not work
Sent from my HTC Dream using Droidfreeks's App
Click to expand...
Click to collapse
Hi, I tried doing a Nan+ext backup but I got this error : Run nandroid-mobile.sh via console I also tried doing a Bart backup and it also said Run Bart via console...
So I just did a regular Nan Backup...I don't have my current sd card partitioned...should I partition it so I can do the Nan+ext I currently have a 2gb card and it doesn't have a class number.... Maybe I should format my card?
Thanks!
Ohh ok I see ur problem it won't let u backup nand+ext if you don't have a ext
since you backed up already go ahead and throw the nandriod and any other files on sd card to your pc the format your sd create the app partion and swap partion make sure u formate it ext3 or ext4 depending on what ur rom uses put the nandroid back on sd after format and restore post if it works or not
If this don't work just reverse the process put nad back on pc format card to what is was before then put nand back on sd and restore
Sent from my HTC Dream using XDA App
OK so I partitioned my current memory card =) and was able to succesfully do a nandroid +ext...so now when I get my new card I just have to go into recovery and do a nandroid restore and transfer all my files right? Thanks
Remember to partion your sdcard before transfer
Sent from my HTC Dream using XDA App
Ok so I tried switching my cards and formatted my new card,paritioned it, transfered the files from my other sd card, and tried to a nandroid restore...that's when I get the same error as before to do it from console.
I tried taking all the files out and repartitioning the sd card doing everything again no luck. Reflashed my rom and turned it on after it boots like normal I get a black screen. So just went back to my old sd card was getting force closes so did nandroid restore it said it did but would boot normal and get force closes.
So I reflashed my rom and reinstalled everything manually...from sd card as my market disappeared got it back after reinstalled it...
Any suggestions as I really want a bigger capacity memory card....=/
So I rooted my Nook with autonooter 3.0.0, I followed all the directions entirely. It worked perfectly, I liked it but wanted to try other stuff. Then I successfully installed Honeycomb v4 on my Nook, I tried it out, but didn't like it, I'll wait until later as its more developed. Then I installed CM7 on my Nook. Its nice, but for some reason a lot of my important apps force close on me. So I thought would just return to stock and then go to autonooter. I tried the method found here - http://forum.xda-developers.com/showthread.php?t=914690
So I don't know if it matters, but I remember formatting boot, system, and data in CWR during the installations of Honeycomb, and also formatting the system and data in CM7 and also in trying to return to stock. So in each of the installations I followed all of the directions perfectly.
Ok, so here is my problem. After I try to return to stock, I try to boot up my Nook, it goes to the Touch the Future of Reading screen, then to the screen with the 'n' on it and the adobe message at the bottom comes up. However, it will not go passed this. It hangs and I cannot fix it. I have tried the 8 reboots which does reinstall the original firmware, however when its complete and reboots it does not boot, it does the same thing I just described.
Please help, if I have left out any information just ask and I will fill in the details.
There is a recovery zip on the development forum. Boot into cwr and flash... that should do the trick... hopefully.
Sent from my DROID2 using XDA App
ext3 / ext4
Doesnt he need to format the partions with a ext3 cwr before flashing or will the recovery do that?
vtx67 said:
Doesnt he need to format the partions with a ext3 cwr before flashing or will the recovery do that?
Click to expand...
Click to collapse
Yeah, I'm beginning to think I do have to fix up the partitions because everything I do is just giving me more hang.
Can anyone help with that?
Get CWR 3.0.5...
Write the SD card image to your uSD...
Copy repartition-boot-with-stock.zip to the root of the SD card...
Decide if you want to restore to 1.0.0 or 1.0.1 and copy the appropriate nook-complete-restore-1.0.x.zip to root of the SD card....
Boot off the SD card in your NC
since you say you have formatted boot... shouldn't ever need to do that btw...
Format Boot... System... Data... and cache...
Install the repartition boot zip file... then the complete system restore from SD card.
yeah.. once you reformat with CWR 3.0.0.5 you should be able to do the re-partition boot flash and then restore the image.
I just got back that way as well.
DizzyDen said:
Get CWR 3.0.5...
Write the SD card image to your uSD...
Copy repartition-boot-with-stock.zip to the root of the SD card...
Decide if you want to restore to 1.0.0 or 1.0.1 and copy the appropriate nook-complete-restore-1.0.x.zip to root of the SD card....
Boot off the SD card in your NC
since you say you have formatted boot... shouldn't ever need to do that btw...
Format Boot... System... Data... and cache...
Install the repartition boot zip file... then the complete system restore from SD card.
Click to expand...
Click to collapse
Thanks for all the help! I'm going to try this now. And I'm guessing it is, but will it be ok to use CWR 3.0.0.6 and boot with that from the SD card?
It needs to be CWR 3.0.0.5 in my experience.
3.0.0.6 supports EXT4 partitions and won't format them back to EXT3.. as long as they are EXT4, the nook will not boot into the stock rom.
The stock kernel doesn't support EXT4.. so it hangs just before it loads the system files..
If you wipe the partitions using 3.0.0.5 and install the full recovery image for 1.01 you should be a-ok.
Alright I got it! You guys are the best! Thanks for the help! Now I just need to re-root and I'm good to go! Thanks again!
Oh and yeah I used 3.0.0.5, that may have been the problem all along because I kept trying to fix with 3.0.0.6. Thanks!
When you backup via nandroid (on Amon), what do you select?
I just left it on defaults but haven't had to do a restore yet so wondering.
From memory I think the following options are UNticked by default
- recovery - I assume this is Amon_RA itself, and I would never need this unless I totally screw it and have to manually push the nandroid backup from adb including the recovery image?
- sd ext - I assume its just the rest of the SD card = doesn't matter?
- .androidsecure - I assume its apps2sd, since I use titanium for that = doesn't matter?
Any experts advice appreciated, cheers
1. You don't need to check 'recovery'.
2. If you're using any custom ROM that can move your installed applications to Ext partition, it should be checked for backup. Otherwise, you may have problem when restoring it.
3. .android_secure is where the application goes when you move it to SD card. I recommend it to be checked if you moved any one to SD card, to reduce the chance to be screwed when you restore your backup.
Thanks I'll try again
I have a Galaxy S GT i9000 and I managed to install CWM Recovery 2.5.1.0 on it after I accidentally selected backup (to internal sd)..
I want to get the data off the internal SD but miui won't boot. I have EXT4 filesystem.
if I try boot it never gets past samsung logo.
I havn't been able to use my phone for a month now because of this problem.
I didn't want to try fix it straight away when it broke incase I did something to lose all my data..
I was getting major FC's on everything i opened, it wasn't bad at first, but than FC's came more and more regularly, until I can't open any apps.
than the phone would boot loop after boot animation. now after trying to backup the internal SD, I accidentally backed up to internal SD. phone won't boot.
this happened at my god father's funeral "after meeting". I was using phone and suddenly it doesn't work.
I recorded very important video from god father's funeral i promised to make video for god fathers wife.
I really need my data and at least want to be able to mount ext4 from CWM recovery to copy data to windows. or somehow reinstall MIUI without wiping /data.
I thank you in advanced for your help.
I looked for a month and couldn't find anything.
There are 2 things I can think of,
1. Use ADB to pull from sd card, I'm not sure if you need to be in recovery or download mode, check it out.
2. When you format you phone you don't delete your sd card so it should all be saved. You will loose all you apps etc but not your data.
If you want to save the exact format you phone is in, try flash the rom again. If its through odin then you will factory reset. (Again you wont loose your internal sd card contents).
I've managed to get my data back now thank you for the suggestions
Hi all !
I had OmniRom installed, and after trying to go back to my stock ROM via a CWM backup I had, I cannot restore backups from my external SD card anymore.
Whenever I try to restore a backup (either a newly made one or an old one), I have "error while restoring /data". The WM lock says "can't partition non mmcblk devide /devices/platform/msm_sdcc.3/mmc_host/mmc1".
Backing up to the internal card and then restoring works.
I tried to move a backup from the external card to the internal card and then restoring, but it did not work (same error).
Any idea where this might come from ?
How can I solve this ?
Thanks !
thewild said:
Hi all !
I had OmniRom installed, and after trying to go back to my stock ROM via a CWM backup I had, I cannot restore backups from my external SD card anymore.
Whenever I try to restore a backup (either a newly made one or an old one), I have "error while restoring /data". The WM lock says "can't partition non mmcblk devide /devices/platform/msm_sdcc.3/mmc_host/mmc1".
Backing up to the internal card and then restoring works.
I tried to move a backup from the external card to the internal card and then restoring, but it did not work (same error).
Any idea where this might come from ?
How can I solve this ?
Thanks !
Click to expand...
Click to collapse
Answering my own question : after reflashing boot.img from FXP250, restoring my backup worked ! I thought it was the one I had restored in the first place, but obviously I was wrong !