Hey guys, I've been reading around but prefer to ask directly in case there's something I'm missing.
What I did was:
* Root with SuperOneClick
* Installed Rom Manager
* From Rom manager installed CWM
* From Rom manager selected Boot to recovery
=> stuck at LG logo
Is there any other option besides flashing a stock rom with SmartFlash? Also does it really matters which version I flash (I had stock froyo, can I flash stock GB?).
Thanks in advance, I'm about to freak out
_EDIT_
This post worked for me a big thanks to all who came in here to help.
Try to reboot in recovery by press power button+volume down.
Cice96 said:
Try to reboot in recovery by press power button+volume down.
Click to expand...
Click to collapse
Thanks but nothing happens, also tried removing the battery and doing it again but no luck
I think the only solution possible is to restore the original lg rom.
This will erase all your internal sd card data and all the app.
1) download the rom you want to restore from here:http://forum.xda-developers.com/showthread.php?t=1035041
2)Download smartflash program and drivers from here:
-http://loadbalancing.modaco.com/download.php?url=mf/?ebwer79kx5abx61
-http://loadbalancing.modaco.com/download.php?url=mf/?ebwer79kx5abx61
3)Run smartflsh proram
4) Pull the phone's battery off and connect it with the usb to the computer then press volume down, install the drivers if necessary
5)In smartflsh select the rom copy D/L tab and be sure that normsl mode is selected and erase cal is NOT selected.Select in cp bin the rom .fls file and in ap bin the .bin file then click start.
Cice96 said:
I think the only solution possible is to restore the original lg rom.
This will erase all your internal sd card data and all the app.
1) download the rom you want to restore from here:http://forum.xda-developers.com/showthread.php?t=1035041
2)Download smartflash program and drivers from here:
-http://loadbalancing.modaco.com/download.php?url=mf/?ebwer79kx5abx61
-http://loadbalancing.modaco.com/download.php?url=mf/?ebwer79kx5abx61
3)Run smartflsh proram
4) Pull the phone's battery off and connect it with the usb to the computer then press volume down, install the drivers if necessary
5)In smartflsh select the rom copy D/L tab and be sure that normsl mode is selected and erase cal is NOT selected.Select in cp bin the rom .fls file and in ap bin the .bin file then click start.
Click to expand...
Click to collapse
Thanks, yeah I think that's the only solution, in fact I've been downloading a stock rom for a while now. Just don't know if that's the one for me, I'm downloading this one:
EURO OPEN
BIN_LGP990AT-00-V20q-EUR-XX-JAN-24-2012-0
and I had froyo v10a would that do it?
These roms are all gingerbread stock roms.
Cice96 said:
These roms are all gingerbread stock roms.
Click to expand...
Click to collapse
Okay, that's good. I'll try the one I'm downloading, if i get no service or something I'll fix that then, all I care about now is get it booting
Thanks.
japmsn said:
Okay, that's good. I'll try the one I'm downloading, if i get no service or something I'll fix that then, all I care about now is get it booting
Thanks.
Click to expand...
Click to collapse
is your device still rooted...can you get access to the CWM with power button+volume down button...then u can flash a rebuild of V20q by Flix...or you can try other stock ROMs like Django Manouche 1.2 ROMs.or the one which is just released by Civato...these stock ROMs have all the things and look like Stock but with more performance related tweaks.
SREEPRAJAY said:
is your device still rooted...can you get access to the CWM with power button+volume down button...then u can flash a rebuild of V20q by Flix...or you can try other stock ROMs like Django Manouche 1.2 ROMs.or the one which is just released by Civato...these stock ROMs have all the things and look like Stock but with more performance related tweaks.
Click to expand...
Click to collapse
As stated on third comment after Cice96's suggestion, I'm unable to boot into recovery. If you mean after I flash with SmartFlash I'll try but doubt I'll still have CWM.
Tried nvflash cwm? Search for the thread by Rusty! In dev section.
japmsn said:
As stated on third comment after Cice96's suggestion, I'm unable to boot into recovery. If you mean after I flash with SmartFlash I'll try but doubt I'll still have CWM.
Click to expand...
Click to collapse
friend,
are u able to enter the recovery mode or not...I see the post 3 and i think u have no access to CWM or recovery...is that right?
temasek said:
Tried nvflash cwm? Search for the thread by Rusty! In dev section.
Click to expand...
Click to collapse
I'm looking here, is that what you mean? Can I flash that with nvflash even with my phone in this state? That would be awesome as the rom I was downloading was corrupted (dam freakshare) so gonna have to try again.
SREEPRAJAY said:
friend,
are u able to enter the recovery mode or not...I see the post 3 and i think u have no access to CWM or recovery...is that right?
Click to expand...
Click to collapse
I'm not able to enter recovery/CWM mode. Even if I press the combination of keys the phone won't move from the LG logo.
What kind of O2X do you have?
If it's SU660, try doing home-vol down-power to get into recovery.
---------- Post added at 03:22 AM ---------- Previous post was at 03:19 AM ----------
also, you need to keep holding down the buttons until you get to the second LG logo
aragorn7 said:
What kind of O2X do you have?
If it's SU660, try doing home-vol down-power to get into recovery.
---------- Post added at 03:22 AM ---------- Previous post was at 03:19 AM ----------
also, you need to keep holding down the buttons until you get to the second LG logo
Click to expand...
Click to collapse
Thanks for answering aragorn7, I already fixed it with this post.
Gonna edit the first post
Related
Hello XDA.
Being a tech illiterate noob, I rooted and tried to install the latest nightly build from cyanogenmod on my Optimus 2x. I gave clockworkmod superuser rights, booted in recovery mode and went on with the install.
Everything went fine (I think) until the phone rebooted. When it started, as usual, the LG logo is shown. Normally another LG logo comes up after the first one, only with an purple animation behind it.
When this comes up, it completely freezes at the very first frame of the animation. I tried waiting, I left my phone for over an hour, but nothing changed.
As previously stated, I am pretty tech illiterate, so of course I didn't make a copy of the original rom.
Now I can boot into something called Android system recovery <3e>, which says:
"Android system recovery <3e>
Android system recovery utility
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
__________________________
Formatting DATA:...
Formatting CACHE:...
Formatting MISC:...
"
And yes, of course I tried selecting that option, but neither of the keys work. The volume keys work as up and down keys, and the home button shows/hides the options.
I tried downloading the original rom from the giant thread of stock roms, but if you try clicking either of the links, you will see that they are broken.
HELP!
Have you tried the power button yet? Because the power button allows you to select things.
From there wipe everything (data, cache, dalvik) and make a fresh install of cm.
SP1996AC said:
Have you tried the power button yet? Because the power button allows you to select things.
From there wipe everything (data, cache, dalvik) and make a fresh install of cm.
Click to expand...
Click to collapse
As I said, I tried every button. That includes the power button.
h9_ said:
As I said, I tried every button. That includes the power button.
Click to expand...
Click to collapse
Looking at your menu description.....I dont see the option of "install from SD card" menu....
Did you install the ROM manager and through the wifi....get the CWM flashed for the device....
Check after tht....the CWM should be fine....
SREEPRAJAY said:
Looking at your menu description.....I dont see the option of "install from SD card" menu....
Did you install the ROM manager and through the wifi....get the CWM flashed for the device....
Check after tht....the CWM should be fine....
Click to expand...
Click to collapse
I installed ROM Manager yes. Do you mean that I should install CWM on my memory card? I'm not sure you understood me right, I can't get past the boot menu, meaning I can't install anything via the phone.
h9_ said:
I installed ROM Manager yes. Do you mean that I should install CWM on my memory card? I'm not sure you understood me right, I can't get past the boot menu, meaning I can't install anything via the phone.
Click to expand...
Click to collapse
My friend,
Have u flashed the CWM from the ROM manager? This is the first menu item in the ROM manager once opened? This is what I asked u...If you havent...please do it....do it when u have wifi preferably
h9_ said:
Being a tech illiterate noob
As previously stated, I am pretty tech illiterate
Click to expand...
Click to collapse
SREEPRAJAY said:
My friend,
Have u flashed the CWM from the ROM manager? This is the first menu item in the ROM manager once opened? This is what I asked u...If you havent...please do it....do it when u have wifi preferably
Click to expand...
Click to collapse
I can't open the ROM Manager, since the phone won't get past the boot screen. What kind of software do I need to flash?
h9_ said:
I can't open the ROM Manager, since the phone won't get past the boot screen. What kind of software do I need to flash?
Click to expand...
Click to collapse
try getting back to the the STOCK and see if you can recover back..with this thread
http://forum.xda-developers.com/showthread.php?t=1327929
.if not u have to work with Rusty's recovery tool...
But, just a small question....have u tried to install a ROM...not made the three wipes....?or a EXT3 ROM on a EXT4 ...this might also make a bootloop....
SREEPRAJAY said:
try getting back to the the STOCK and see if you can recover back..with this thread
http://forum.xda-developers.com/showthread.php?t=1327929
.if not u have to work with Rusty's recovery tool...
But, just a small question....have u tried to install a ROM...not made the three wipes....?or a EXT3 ROM on a EXT4 ...this might also make a bootloop....
Click to expand...
Click to collapse
Some of the links there are broken, so I can't manage to complete the tutorial.
Also, I am very sorry, but I do not understand what you mean by that last part.
Let's see, you rooted, installed ROM Manager and Clockworkmod Recovery from within ROM Manager, rebooted and from Clockworkmod Recovery (Black Screen with Blue letters, lets you wipe and install zips from SD Card), you flashed the ROM, is that correct?
Can you boot into Recovery by holding the Power + Volume Down buttons? (hold for about 20 secs, until you get to the second LG screen)
If you can get to the recovery mode, try flashing another ROM.
xxMOISESxx said:
Let's see, you rooted, installed ROM Manager and Clockworkmod Recovery from within ROM Manager, rebooted and from Clockworkmod Recovery (Black Screen with Blue letters, lets you wipe and install zips from SD Card), you flashed the ROM, is that correct?
Can you boot into Recovery by holding the Power + Volume Down buttons? (hold for about 20 secs, until you get to the second LG screen)
If you can get to the recovery mode, try flashing another ROM.
Click to expand...
Click to collapse
You sir are correct!
I manage to start the phone as you describe, by holding down those two buttons I enter "Android System recovery <3e>", and can choose between the options as I described. HOWEVER, I can't select either of them, trying all the possible buttons (even combinations).
Update: I tried following this guide, but with no luck; http://forum.xda-developers.com/showthread.php?t=1327599
Good
If you are in Clockworkmod, then you can browse through the menus using volume up/down to move up/down and press the search button (the magnifying glass) to accept or select an option.
I have a Optimus 2X Stockrom, i can upload the rom when i come home (you have to wait about 6 hours sorry ) Then flash the rom in cwm
Sorry for my english :/
Edit: It's the Europe Rom i hope this will help you too
Sent from my Optimus 2X using XDA Premium App
xxMOISESxx said:
If you are in Clockworkmod, then you can browse through the menus using volume up/down to move up/down and press the search button (the magnifying glass) to accept or select an option.
Click to expand...
Click to collapse
The only problem is I can't boot into CWM, I can only boot into the ****ty Android System Recovery...
r00t4ev3r said:
I have a Optimus 2X Stockrom, i can upload the rom when i come home (you have to wait about 6 hours sorry ) Then flash the rom in cwm
Sorry for my english :/
Edit: It's the Europe Rom i hope this will help you too
Sent from my Optimus 2X using XDA Premium App
Click to expand...
Click to collapse
The Europe Open could be what I'm looking for, thanks a lot! It's really hard to come by apparently.
Flashing it in CWM wont be possible though. Perhaps through PC software?
I will upload the Europe Open when i'm back from school.
You can flash the rom ether with cwm or with smartflash.
If you don't know how to flash it with smartflash i can explain it to you
Sent from my Optimus 2X using XDA Premium App
Edit: I'm uploading the Rom now, but it will take some time (about 1 1/2 hours), because i upload with 90 kb/s.
That's your only solution, Flash some Stock ROM with a Tool from LG then root and flash a Custom one if you want.
I hope i can held you with this:
http://uploaded.to/file/mj7cgk4v
If you don't know how to flash the rom just ask
xxMOISESxx said:
That's your only solution, Flash some Stock ROM with a Tool from LG then root and flash a Custom one if you want.
Click to expand...
Click to collapse
Any particular tools in mind? I have one called smartflash (SmartFlashTool_P990) which requires .bin files.
Hi Dude,
Thanks for the link you uploaded. Can we install this on LG optimus 2x p990 indian model.
By mistake and lack of knowledge i didnt take back up of stock rom, while installing cyanogenmod. Now i want to go back to stock rom.
1. Can i use this file and zip install in CWR recovery mode.?
Kindly do reply
r00t4ev3r said:
I hope i can held you with this:
http://uploaded.to/file/mj7cgk4v
If you don't know how to flash the rom just ask
Click to expand...
Click to collapse
3 and a half hours to download, will report back when its done..
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
RolloJarvis said:
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
Click to expand...
Click to collapse
Reflash with Smart Flash Tool. A few kernels automatically go to recovery if they fail to load. I can't think of anything else.
Try changing your CWM Recovery by flashing another version. Use my CWM Recovery flasher (in my signature).
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
RolloJarvis said:
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
Click to expand...
Click to collapse
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
UniversalSS said:
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
RolloJarvis said:
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
Click to expand...
Click to collapse
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
might be redundant saying this but in cwm itself have you flashed the 6.0.1.4 update within itself ald?
N00BY0815 said:
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
Click to expand...
Click to collapse
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
Click to expand...
Click to collapse
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
RolloJarvis said:
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
Click to expand...
Click to collapse
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
N00BY0815 said:
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
Click to expand...
Click to collapse
I have just done exactly these steps. I have tried flashing both the zeus rom and AOKP jelly bean build 4. Each time the ROM flashes successfully, however when I select "reboot system now," it just boots straight back to recovery again...
The only thing I could think of trying would be to restore a nandroid with cwm. I dont have one though, can anyone link me to a working nandroid, or upload one?
thanks
A crazy idea......
Stuck G key?
Sent from my LG-P970 using xda premium
could be... I havent got the phone at the moment but ill check next week. Not sure how i'd fix it though
got the phone back again... when i go into CWM "Key Test" option, it implies "button 0" is being pressed repetitively. Anyone know which button this is?
i was on jelly bean leak xxls7 so for flashing rocket rom v3 i used Philz 3.5 kernel for xxls7 but after that the screen went off & when i turn on the device only samsung logo appears after that nothing comes on screen .
when i using odin to install philz 2.7 the process is stuck on setup connection & i am not even able to use recovery as there is nothing visible on the screen .
what to do????????????/a
i have tried most of versions of odin to flash stock ics but no luck always stuck on setup connection !!
one more thing i want to ask is when i enter in download mode it say OFFICIAL BINARY INSTALLED so if i go to service centre can i claim my warranty ?
remove the battery for a while and try to boot again. If nothing happens, remove battery, reinsert and this time press vol down + power + home for a while till you see the galaxy note logo, and leave it. connect to PC and check if odin sees it. If yes, try to flash the kernel again and check, if not then flash a rom.
nokiamodeln91 said:
remove the battery for a while and try to boot again. If nothing happens, remove battery, reinsert and this time press vol down + power + home for a while till you see the galaxy note logo, and leave it. connect to PC and check if odin sees it. If yes, try to flash the kernel again and check, if not then flash a rom.
Click to expand...
Click to collapse
i did all of this but process using odin stuck on setup connecction.
when you press the 3 button combo, the you will reach a confirmation screen, then you need to press vol up to confirm. only then it will proceed. may be that's why the odin cannot connect.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
Although you can see it, it's probably there. so just take your time and do. don't hurry.
nokiamodeln91 said:
when you press the 3 button combo, the you will reach a confirmation screen, then you need to press vol up to confirm. only then it will proceed. may be that's why the odin cannot connect.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
Although you can see it, it's probably there. so just take your time and do. don't hurry.
Click to expand...
Click to collapse
yes i did that ...
Ok... Try rebooting pc and chekc
nokiamodeln91 said:
Ok... Try rebooting pc and chekc
Click to expand...
Click to collapse
one thing i want to ask is that 3.5 ver of philz is compatible or not with 4.1.2
nokiamodeln91 said:
Ok... Try rebooting pc and chekc
Click to expand...
Click to collapse
nothing happened its still stuck on setup connection
goti(0) said:
one thing i want to ask is that 3.5 ver of philz is compatible or not with 4.1.2
Click to expand...
Click to collapse
there is no change in the kernel it's just the recovery that has changed. so it is compatible. has someone answered your query you posted in philz thread?
goti(0) said:
i was on jelly bean leak xxls7 so for flashing rocket rom v3 i used Philz 3.5 kernel for xxls7 but after that the screen went off & when i turn on the device only samsung logo appears after that nothing comes on screen .
when i using odin to install philz 2.7 the process is stuck on setup connection & i am not even able to use recovery as there is nothing visible on the screen .
what to do????????????/a
Click to expand...
Click to collapse
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
there are two different threads by phill giving two different things. did you take from the right thread ? just making sure
cheongkk said:
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
Click to expand...
Click to collapse
i was also hoping for this option but download crashed so downloading again....but i am about to flash 4.1.2 is that ok
rraaka said:
there are two different threads by phill giving two different things. did you take from the right thread ? just making sure
Click to expand...
Click to collapse
i think this is the problem .... i am sure what i selected but i do trust philz kernels so i flashed it directly
can you boot to recovery?
Sent from my GT-N7000 using Tapatalk 2
zai89 said:
can you boot to recovery?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
nope
best to get back to stock Gb via pc odin, root and get a workable recovery and make your way up from there
im thinking you can get into download mode
rraaka said:
best to get back to stock Gb via pc odin, root and get a workable recovery and make your way up from there
im thinking you can get into download mode
Click to expand...
Click to collapse
yes download mode is working fiine
goti(0) said:
yes download mode is working fiine
Click to expand...
Click to collapse
how is the download now working? you said it was a black screen.. if its working then there is no issue. just install ics and install philz kernel for that rom..
nokiamodeln91 said:
how is the download now working? you said it was a black screen.. if its working then there is no issue. just install ics and install philz kernel for that rom..
Click to expand...
Click to collapse
i told that after samsung logo nothing is visible so as boot animation after that nothing is visible & also i cant get into recovery ...
cheongkk said:
It did happen to me for the first time when I flash the xxls7. Go to download mode and flash a stock rom. After U have restore your phone. Flash Hardcore Kernel V7. and remember to do 3 wipe. Boot to Recovery and Flash the rom first then the Philz kernel. I did it without problem and have a nice Jelly Bean rom. Good luck and Enjoy.
Click to expand...
Click to collapse
are you sure same thing happen to your note because even when i am trying to flash stock ics 4.0.4 odin is still stuck at setup connection
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Flash stock again if you will hawe bootlop turn out batery flash via odin cwm and try go to cwm and wipe ewerything in cwm you hawe botloop becase you flash stock whitout wipe and formating system
Flach the CWM again via odin then install tha CM10 via CWM its so easy
Sent from my GT-S6500D using xda premium
Stop posting these PLEASE HELP threads... just wipe data
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
He is right
If you fraid lose your data then don't try to install this rom
Cause any proplem of thoose just to be sure re flash cwm or stock rom
Sent from my GT-S6500D using Tapatalk 2
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
Can't you read?? If I want to do a full wipe, I have to go to the recovery first. Oh god!!
flash cwm again..
then go to recovery..
wipe everything
then flash stock rom via odin
or restore a nandroid backup.
---------- Post added at 05:37 PM ---------- Previous post was at 05:29 PM ----------
regarding the game youre trying to install.. you dnt have to edit the vold.fstab.. just use the "directory bind" app.. made by a member of xda developers.. i forgot his name..
do a manual binding.. and you can play games regardless of the data size.. as long as you have a big ext_sd storage
i can play need for speed most wanted HD which has 1.8gb of data.. and it runs faster than sd card swap.
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
elkhshap said:
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
Click to expand...
Click to collapse
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Fallen_Knight said:
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Click to expand...
Click to collapse
then what i can do now and if you have any way to install cm with odin
that happened to me twice...i cant go to recovery...1st time i encountered was with cm10...
i flashed stock then bootloop...so i removed battery and everything...after an hour. i pressed vol up down home power then insert battery...poof...it booted recovery...
second time was with cm10.1.. i cant boot to recovery because i left my phone off for 15mins and forgot to turn on...so i booted cm10.1... typed su then reboot recovery on terminal emulator...then wiped everything then flashed stock then cwm...
I have the same problem i can't access to recovery mode Y_Y
Dinepada said:
I have the same problem i can't access to recovery mode Y_Y
Click to expand...
Click to collapse
read this first to avoid bootloop
under FLASHING CUSTOM ROM PART.
http://forum.xda-developers.com/showthread.php?t=2030758
if you dont follow it it will bootloop
incase of bootloop
use this in odin
http://forum.xda-developers.com/showthread.php?t=2227982
I 've tried pda rescued but i got an error
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
this your trying
2 see this
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
Click to expand...
Click to collapse
i've tried that and... It Works!!!! Thank You very much!
Dinepada said:
i've tried that and... It Works!!!! Thank You very much!
Click to expand...
Click to collapse
good newa
IKalam82 said:
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Click to expand...
Click to collapse
Go in recovery mode flash CWM and reinstall CM10
boot into recovery and clear cache and data before you flash new rom otherwise you may get bootloop
Do this:
turn off phone
vol- + turn on (like if you want to go to Download mode)
now home, vol- and fast vol+
congratulation you are in recovery !
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
TheXXY said:
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
Click to expand...
Click to collapse
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
I had the exactly same problem like him. But..
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
...But , i could access to Download Mode *(Volume Down+Power+Home) , I couldn't get access to Recovery Mode only *(it turns Black Screen & keep me waiting so long) .
I thought problem solves if I couldn't change another Custom Rom , but i can't even BOOT into recovery mode.
THANKS Brothers for solving here, THanks THanks. (I'm urgent for it too..)
Current Rom I hooking is:
Carbon0825
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
TheXXY said:
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
Click to expand...
Click to collapse
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
treacherous_hawk said:
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
Click to expand...
Click to collapse
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
after you have flashed Philz kernel... power off the device... and try to boot into recovery.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
treacherous_hawk said:
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
Click to expand...
Click to collapse
Is the Kernel version essential? Since Philz v5.11.2 has several Kernels you can choose from, where as you cannot check which one you have running since the phone does not boot anymore.
correct , you're right!
diwako said:
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
Click to expand...
Click to collapse
still waiting for a clear answer to proceed the steps.
Philz Kernel may need a LINK here. maybe URL ?
THanks ALL ! feel that solutions are near now.
as you cannot check, you can download the one for your region, check on sammobile.com/firmwares for which one is for your region and i already gave the link to the philz kernel, i wont post the direct url for the file.
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
diwako said:
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
Click to expand...
Click to collapse
read from last post here and continue:
http://forum.xda-developers.com/showthread.php?t=2386292&page=27
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
TheXXY said:
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
Click to expand...
Click to collapse
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok... i flashed the kernel: PhilZ-cwm6-DDLSC-ODD-5.11.2.tar.md5
and tried to boot into recovery mode.
the samsung logo with triangle flashed up for a half a second and i released my fingers from the keys
and then the logo show up again and nothing else happened...
is it possible to reset my phone completely? i only need a bootable phone for now...
Thanks!
XXY
Not sure I'm in the same boat...
is anyone seeing the same as I am - I also can't boot into Recovery since nightly 20130824. I can boot into Download mode... and... I can still boot into my current CM10.2 nightly (20130824)!!!
I've tried reflashing CWM using ROM Manager, even a few times... but nothing changes. Trying to get into recovery using VolUp+Home+Pwr doesn't work (after Samsung GT-N7000 white text... blackscreen (which I can see is still 'on'). If I try to boot into recovery using Rom Toolbox or similar, it behaves the same and I can only get it to reboot into the ROM once I've pulled the battery out and then put it back in and connected to a charger so the battery charging icon shows... which somehow clears the 'boot into recovery' flag somewhere.
Very concerned... saw something in the changelogs back at 20130824 about recovery fixes and wondered if this might happen. The first time I got it to boot back into the ROM something wasn't quite right with the internal/external SD mounts... all my ringtones and alerts etc. were reset to just numbers (e.g. 40125) which actually happens more often than I expect... but this time I couldn't find the ones I usually use in the selection list.
I rebooted with SD card out... then re-inserted it... and then things went back to how they should be and I could see and select my preferred tones again.
Have tried booting into Recovery via app, via hw keys... with SD card in, SD out... SIM card in... SIM out... both SD and SIM out... there's just no way into recovery.
Using ROM Manager I also tried to setup the alternative Recovery (TWRP) but that also gets stuck with the message 'ROM Manager has been set up to use your existing recovery installation'. but same behaviour when trying to boto into recovery.
I've also used Android Root Toolkit to try save/protect Root... Restore Root.. etc. but to no avail.
Any ideas... please?
EDIT: Thanks for the Odin3 / PhilZ Kernel advice - that seemed to work.
Question: Now that I've got back to recovery and updated to nightly of 20130826, did I overwrite PhilZ kernel?
yes
Yes,
ideas:
Read the rom thread, fixes there