YOU MUST BE ON .906 OTA TO USE THIS
**If you are on .890 ota please download and use this file>>D3.SBF.890.ZIP (flash via rsdlite)**
UPDATED THE 1 CLICK SBF EXE TO THE OFFICIAL .906 SBF
now you can restore you D3 to factory .906
I created a 1-click-sbf.exe to make flashing as simple as possible.
The exe when ran will extract files to a temp dir (if needed)
to make it easy for you to delete manually or most window cleaners will clean the temp folder.
thus you don't have to have that much room taken up on your hard drive all the time..
when you start the exe it will check the temp folder to see if the files still remain..
if they do it will not need to extract the files thus starting much quicker!
I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE
DOWNLOAD: http://d-h.st/Z7b
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
1. Download the above file to computer
2. Get a beer
3. If you have a spare battery, or the current battery, make sure it's charged above 50%
(quick unbrick wont run if it's below 50%)
4. When the phone is off, press m+power and scroll down to AP Fastboot.
5. Plug the phone into the computer, make sure you get the USB connected message on the phone.
6. Run the "1_CLICK_SBF.exe" (win 7 users right click on .exe and run as administrator)
7. Let your phone restore and boot.
8. Finish that beer your done..wasn't that easy..
====================
MOTOFAIL ROOT TOOL ( this is also a 1_click .exe... )
Download: HERE
NEW! SAFESTRAP v3 for DROID 3
Download v3.05 [ 2012-10-17 ]
md5sum: 39b1cd260e00d5d73faa7f27b7e31d25
SAFESTRAP (TWEAKED) v1.08e RECOVERY (NON-KEXEC)
Download:HERE
NEW! ADOBE FLASH .APK DOWNLOAD
Download:HERE
====================
Credits:
Q9nap
Hashcode
Redsox985
Psouza4
droidian1441
PLEASE DONT FORGET TO CLICK THE LITTLE THANKS BUTTON...
YOU MAY NOT COPY OR RE-POST OUR WORK WITHOUT PERMISSION
thank you
button clicked √
jellman said:
thank you
button clicked √
Click to expand...
Click to collapse
No problem..
bricked me any ideas?
---------- Post added at 09:12 AM ---------- Previous post was at 09:02 AM ----------
nvm got it. jeesh what a scare rsd never works for me. moto-fastboot<3
jellman said:
bricked me any ideas?
---------- Post added at 09:12 AM ---------- Previous post was at 09:02 AM ----------
nvm got it. jeesh what a scare rsd never works for me. moto-fastboot<3
Click to expand...
Click to collapse
Lol glad you got it......
Ye I'd like to use this with moto fastboot.. can I just copy the files over/
DoubleYouPee said:
Ye I'd like to use this with moto fastboot.. can I just copy the files over/
Click to expand...
Click to collapse
Give her a whirl and see lol I always use rsd
Thanks for the files!
I'm still waiting for someone to get this to work with RSD. I threw this patch files together and zipped them, but never tried them because I really didn't want to risk anything with a working phone. I'm glad someone has tried it at least with moto-fastboot.
Never tried my own product! :O
Woo! User "jth08527" confirmed the .zip above works as is in RSD Lite 5.6. He sent me a PM confirming it because he doesn't yet have enough posts to post here.
redsox985 said:
Woo! User "jth08527" confirmed the .zip above works as is in RSD Lite 5.6. He sent me a PM confirming it because he doesn't yet have enough posts to post here.
Click to expand...
Click to collapse
Im sorry I thought I said that in the op..
I used it myself and confirmed it..
but glad it is saving people..this is a huge asset to people on. 906
I'm confused...I downloaded "906 SBF.7z"...there is no zip file? how shall I flash it with RSD?
and now the link is the thread i dead
1of16 said:
I'm confused...I downloaded "906 SBF.7z"...there is no zip file? how shall I flash it with RSD?
and now the link is the thread i dead
Click to expand...
Click to collapse
They are in a 7zip file instead of a .zip or winrar
all you have to do is use 7zip (which is freethe softwear) to extract the files then load the. Xml file into rsdlite and flash
And minus has been having problems the last few days but it is one of the better free hosting sites so just be patient and it will come back..also I would suggest using your computer to download the file as alot of mobile browsers have problems with this site
ovelayer said:
They are in a 7zip file instead of a .zip or winrar
all you have to do is use 7zip (which is freethe softwear) to extract the files then load the. Xml file into rsdlite and flash
Click to expand...
Click to collapse
ha, that's too simple didn't know that RSD can use the xml-files. thanks...I'll keep you posted.
edit: I think it worked, got the same baseband and buildnumber as in 890, but the 906 kernel. i guess thats ok?!?
Someone should make it so it works like this:
http://forum.xda-developers.com/showthread.php?t=1336980
Looking at the files it looks like it should work if you just copy&replace the files into the "files" folder?
1of16 said:
ha, that's too simple didn't know that RSD can use the xml-files. thanks...I'll keep you posted.
edit: I think it worked, got the same baseband and buildnumber as in 890, but the 906 kernel. i guess thats ok?!?
Click to expand...
Click to collapse
Correct now you can reapply the. 906 update if you want and yet all good
DoubleYouPee said:
Someone should make it so it works like this:
http://forum.xda-developers.com/showthread.php?t=1336980
Looking at the files it looks like it should work if you just copy&replace the files into the "files" folder?
Click to expand...
Click to collapse
As long as the. Exe used calls the. Xml I don't see why you couldn't ..
drop the files from our. Zip into that one ..hmm
I have to take the wife and kids to the lake but I can play with it over the next few days..
Afterall with our sbf we have a way back so can't really hurt lol
ovelayer said:
As long as the. Exe used calls the. Xml I don't see why you couldn't ..
drop the files from our. Zip into that one ..hmm
I have to take the wife and kids to the lake but I can play with it over the next few days..
Afterall with our sbf we have a way back so can't really hurt lol
Click to expand...
Click to collapse
Well yes in fact the .bat file calls the files via the .exe
Code:
moto-fastboot.exe -w
moto-fastboot.exe flash recovery files\recovery.img
moto-fastboot.exe flash boot files\boot.img
moto-fastboot.exe flash devtree files\device_tree.bin
moto-fastboot.exe flash logo.bin files\logo.bin
moto-fastboot.exe flash preinstall files\preinstall.img
moto-fastboot.exe flash cdrom files\cdrom
moto-fastboot.exe flash radio files\radio.img
moto-fastboot.exe flash system files\system.img
moto-fastboot.exe reboot
DoubleYouPee said:
Well yes in fact the .bat file calls the files via the .exe
Code:
moto-fastboot.exe -w
moto-fastboot.exe flash recovery files\recovery.img
moto-fastboot.exe flash boot files\boot.img
moto-fastboot.exe flash devtree files\device_tree.bin
moto-fastboot.exe flash logo.bin files\logo.bin
moto-fastboot.exe flash preinstall files\preinstall.img
moto-fastboot.exe flash cdrom files\cdrom
moto-fastboot.exe flash radio files\radio.img
moto-fastboot.exe flash system files\system.img
moto-fastboot.exe reboot
Click to expand...
Click to collapse
Wish I was at home because in theory that should work perfect and now we would have a 1click .906 sbf which could also be made into a single .exe sbf
ovelayer said:
Wish I was at home because in theory that should work perfect and now we would have a 1click .906 sbf which could also be made into a single .exe sbf
Click to expand...
Click to collapse
I just copied the files over, but all of them except the .xml are exactly the same.
So.. is this a .890 SBF that works on .906? Or did I miss something
Related
I have a Marquee and have successfully rooted using http://androidnerds.net/2011/10/08/lg-esteem-oneclickroot-now-ready/. Apparently the LG Esteem is close enough for this to work. After install, you will need to manually update superuser via the market.
Thanks to Hoovhartid over at androidcentral forums for suggesting this.
Can u make backup for ur gb and upload it here?
Sent from my LG-P970 using XDA App
Fatcobrah, if you can give me instructions how to back it up, I will be glad to upload it. I have root access but not CWM recovery.
tcaudill01 said:
Fatcobrah, if you can give me instructions how to back it up, I will be glad to upload it. I have root access but not CWM recovery.
Click to expand...
Click to collapse
install Rom Manager from the market
ROM manager doesn't give an option for my phone for CWM and you can't back up your ROM without it.
Sorry but not risking bricking this thing if I make the wrong choice.
tcaudill01 said:
ROM manager doesn't give an option for my phone for CWM and you can't back up your ROM without it.
Sorry but not risking bricking this thing if I make the wrong choice.
Click to expand...
Click to collapse
Hmm you can use root explorer to copy all files & folder from root folder to sdcard
Sent from my Optimus Black using Tapatalk
lesp4ul said:
Hmm you can use root explorer to copy all files & folder from root folder to sdcard
Sent from my Optimus Black using Tapatalk
Click to expand...
Click to collapse
+1.and you can use adb to pull all files and boot.img ,and we can test it in a safer way
Okay guys, I thought what the hell, I'll try the LGE Black option in ROM manager and see what happens.
IT WORKS!!!!!!!!!!!!!!!!!!
Use the volume keys to move and the search button to select.
I have backed up the ROM from the Marquee and loaded on Mediafire.
The back up wasn't good, so i pulled the link. Sorry!
Hope this helps.
Sorry folks, I don't think the backup is any good. I tried another and it looks the same. It is too small and doesn't have musch data.
Can someone point me to, or step me through, how to pull all the files with adb. I'll be glad to pull and post.
tcaudill01 said:
Sorry folks, I don't think the backup is any good. I tried another and it looks the same. It is too small and doesn't have musch data.
Can someone point me to, or step me through, how to pull all the files with adb. I'll be glad to pull and post.
Click to expand...
Click to collapse
http://www.addictivetips.com/mobile/how-to-perform-and-restore-a-nandroid-backup/
am kinda noob too..so hope this will help!xD
first of all,you need a adb.exe
you can get it from super-one-click,or android sdk,google it
for example,we pull files at d:\system
copy adb files in d:\system
and then,open cmd(win+R,enter cmd)
connect your phone before we start.
type
Code:
d:
adb pull /system .\system
ok then it will pull all the system files into d:\system
does it back up to a directory on the SD card? if it does, you need all the files in the directory. there should be a few .img files along with the nandroid.md5 file. put them all in a zip and upload it.
look in sdcard: \clockworkmod\backup\
the directory the files are in should be named with a date+time stamp
Any chance?
mike-y said:
does it back up to a directory on the SD card? if it does, you need all the files in the directory. there should be a few .img files along with the nandroid.md5 file. put them all in a zip and upload it.
look in sdcard: \clockworkmod\backup\
the directory the files are in should be named with a date+time stamp
Click to expand...
Click to collapse
I've already tried the CWM backup and it is no good, only about 18 meg in size and missing almost everything important.
That is why I was trying to get directions on how to use ADB to pull system files and image from the phone.
tcaudill01 said:
I've already tried the CWM backup and it is no good, only about 18 meg in size and missing almost everything important.
That is why I was trying to get directions on how to use ADB to pull system files and image from the phone.
Click to expand...
Click to collapse
1. Download Android SDK http://developer.android.com/sdk/index.html
2. Install it on C: (not on Program Files for Easy Access)
3. Connect your phone through USB with debugging on
4. Open Command propt from your PC. (windows button + r / type "cmd" without quotes)
5. On command prompt type "cd c:\Android\ASDK\platform-tools" (without quotes then press Enter)
6. Then type "adb pull /system" (without quotes then press Enter)
7. wait till it's finished pulling the files
Now go to C:Android\ASDK\platform-tools. Copy all files now, zip it. Upload, they'll just exclude/disect the adb ones.
this is interesting. I'm going to try to use this method for rooting our P970.
Advices are welcome
Okay, I used ADB and was able to pull the system, boot.img and recovery.img.
Not sure if any of these are correct. The system file is HUGE (434mb zipped) but looks like every thing is there. Both boot and recovery are 5.00mb each.
If this looks right and is what you are after I will upload it to mediafire.
Let me know.
go go up it!, i wanna see if we can get a nice gingerbread with lg drivers from this.
tcaudill01 said:
Okay, I used ADB and was able to pull the system, boot.img and recovery.img.
Not sure if any of these are correct. The system file is HUGE (434mb zipped) but looks like every thing is there. Both boot and recovery are 5.00mb each.
If this looks right and is what you are after I will upload it to mediafire.
Let me know.
Click to expand...
Click to collapse
Yes... that's exactly what we need... just zip it and upload it...
tcaudill01 said:
Okay, I used ADB and was able to pull the system, boot.img and recovery.img.
Not sure if any of these are correct. The system file is HUGE (434mb zipped) but looks like every thing is there. Both boot and recovery are 5.00mb each.
If this looks right and is what you are after I will upload it to mediafire.
Let me know.
Click to expand...
Click to collapse
nicely done
now let our chef master to cook it
V20B (CIS)
V20O (DEU)
Root on V20B
information deleted
I used google translator and that's the result of the post above:
All items are strictly in the order do not jump over them and keep the sequence!
Spoiler (+ / -) (I advise you to read before flashing)
to the root of drive C:
Two. Download Attachment SmartFlashTool_External.rar (1.18 MB) Number of downloads: 37
and extract the root of drive C:
3. Download Attachment Superuser.zip (611.2 KB) Number of downloads: 51
and put ( no need to unpack ) File on the SD-card phone
4. Turn off the phone.
Five. We hold the Volume Up (+) and insert the USB cable one end into the computer, the other into the phone
6. We will have the text of S / W Upgrade Please wait while upgrading ...
Spoiler (+ / -)
7. Run the file B_SmartFlashTool_Extern.exe
Eight. Go to the tab ROM copy D / L
9. Select the two files that you extracted from the archive [PATCHED] BIN_LGP970AT-00-V20a-CIS-XXX-JAN-06-2012 +0.7 z
10. Check:
Spoiler (+ / -)
11. Click the Start button
12. Go to the process of the firmware, go to drink coffee \ tea shorter depart away from your computer to your phone
13. When you sign Download Comlete! Go to the phone
Spoiler (+ / -)
14. On the phone, we see the regime Recovery (touch it, the management of a finger)
15. Select install zip from sdcard
16. Then choose zip from sdcard
17. Prolistyvayem and choose Superuser.zip
18. Prolistyvayem and select Yes - Install SuperUser.zip
19. Select + + + + Go back + + + +
20. Choose wipe data / factory reset
21. Prolistyvayem and select Yes - delete all user data
22. Then reboot system now
That's it! Phone is loaded, if you do it right!
As a result, we have a firmware with the Root-V20A human touch and Recovery! Thank you all and good luck to you in the firmware!
Click to expand...
Click to collapse
Dont exactly know, what it does, but as far as I get it, it roots the device and installs CWM touch.
Credits go to poster, if it is successful.
Hey, thanks for posting here. Here is v20b : http://www.lgmobiles.com/gsm/download/P970 V20B(Gingerbread Version).rar
We don't have it for N version. I saw the russian forum and wanted to ask you about howvyou managed to root v20a before this method.
Sent from my LG-P970 using XDA App
this method is working just v20a(attachment patched bin file) right?
Where how I convert .kdz to .bin file?
I know russian very well.So i shortly translate all procedure done here.
They patched original 20A bin file , changing system recovery.img with clocworkmod recovery.img touch version.
Download 20A.bin extract it,and put somewhere in your computer.
and below there is a CWM flashable superuser.zip.
Download it and put to your Sd kart.Do not extract.
Then simply flash that patched 20A bin file with smart flash procedure posted here from radkor
http://forum.xda-developers.com/showthread.php?t=1448803
After finished flashing with smartflash tool go to cwm recovery and install superuser.zip
and you get rooted original 20A ginger.
Nice option for flashing and rooting
but we do not have 20N bin file yet.
we have only indian version 20B bin file, redpik posted it above
Thread moved
Unless it's a ROM or kernel you've created yourself, this doesn't belong in Development.
Doesn't SmartFlash auto erases all user data (factory reset at first boot)?
Okey... Maybe, tomorrow I will be a version (.bin) V20N
Sorry for my English
Kraaz said:
I know russian very well.So i shortly translate all procedure done here.
They patched original 20A bin file , changing system recovery.img with clocworkmod recovery.img touch version.
Download 20A.bin extract it,and put somewhere in your computer.
and below there is a CWM flashable superuser.zip.
Download it and put to your Sd kart.Do not extract.
Then simply flash that patched 20A bin file with smart flash procedure posted here from radkor
http://forum.xda-developers.com/showthread.php?t=1448803
After finished flashing with smartflash tool go to cwm recovery and install superuser.zip
and you get rooted original 20A ginger.
Nice option for flashing and rooting
but we do not have 20N bin file yet.
we have only indian version 20B bin file, redpik posted it above
Click to expand...
Click to collapse
Ok. Let me try to understand this. They replace "system recovery.img" which is reside in the original rom bin file with "cwm recovery.img" (where to get this file?) and then flash it using smartflash tool. So after reset by smartflah, cwm is already in the phone installed. Then all is easy, proceed to install superuser.zip, etc..etc.zip.
How is it possible to obtain root by inserting cwm in the rom while cwm itself require root to run? Also, what's the "system recovery.img" that got replaced. Is it important?
Please investigate more. Need more info on how "patching" is done too. I don't understand russian.
Sent from my LG-P970 using XDA App
SnegovikRZN said:
Okey... Maybe, tomorrow I will be a version (.bin) V20N
Sorry for my English
Click to expand...
Click to collapse
Can you help to make one for v20b? The link post above by redpik contain bin file for v20b. If succeed, we're going to have the 1st v20b rooted. Hell yeah!
Sent from my LG-P970 using XDA App
adxgrave said:
Ok. Let me try to understand this. They replace "system recovery.img" which is reside in the original rom bin file with "cwm recovery.img" (where to get this file?) and then flash it using smartflash tool. So after reset by smartflah, cwm is already in the phone installed. Then all is easy, proceed to install superuser.zip, etc..etc.zip.
How is it possible to obtain root by inserting cwm in the rom while cwm itself require root to run? Also, what's the "system recovery.img" that got replaced. Is it important?
Please investigate more. Need more info on how "patching" is done too. I don't understand russian.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
I guess you need to investigate more how android works. Flashing recovery image with the whole system in a bin file makes cmw part of the "original" firmware so,like recovery that only can erase all this one can read/write in the system files. Sounds normal. I read on Samsung forums that they get root for latest versions by flashing a patched odin file and then a su zip. I will try it
Sent from my LG-P970 using XDA App
adxgrave said:
Can you help to make one for v20b? The link post above by redpik contain bin file for v20b. If succeed, we're going to have the 1st v20b rooted. Hell yeah!
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
Since Telcel's v20a is is just out, its going to be pretty good news if it works.
mihaiolimpiu said:
Doesn't SmartFlash auto erases all user data (factory reset at first boot)?
Click to expand...
Click to collapse
Yes it does.
Redpik said:
I guess you need to investigate more how android works. Flashing recovery image with the whole system in a bin file makes cmw part of the "original" firmware so,like recovery that only can erase all this one can read/write in the system files. Sounds normal. I read on Samsung forums that they get root for latest versions by flashing a patched odin file and then a su zip. I will try it
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
Then we can say that this is universal method as long as cwm can be patch into the rom. Finding exploit is not necessary anymore. So, what's the function of the file replaced in the rom. Is it the original lg recovery method which is not available anymore if this we use this method?
Thanks for the explanation, I wonder why it hasn't be use before, maybe because lack of rom file in bin format?
Edit: downloading rom in your link, pls post how to proceed if you get hold of it.
Sent from my LG-P970 using XDA App
adxgrave said:
Then we can say that this is universal method as long as cwm can be patch into the rom. Finding exploit is not necessary anymore. So, what's the function of the file replaced in the rom. Is it the original lg recovery method which is not available anymore if this we use this method?
Thanks for the explanation, I wonder why it hasn't be use before, maybe because lack of rom file in bin format?
Edit: downloading rom in your link, pls post how to proceed if you get hold of it.
Sent from my LG-P970 using XDA App
Click to expand...
Click to collapse
The problem is that we don;t know how to extract .bin files and modify the content. Just the first post has the good link I posted the stock v20B so he would patch it
Redpik said:
The problem is that we don;t know how to extract .bin files and modify the content. Just the first post has the good link I posted the stock v20B so he would patch it
Click to expand...
Click to collapse
to get the files out of a kdz: grab them while someone is using the KDZ program to update their phone. The files are extracted and put into "C:\ProgramData\LGMOBILEAX\Phone" but as soon as the program detects no phone the entire directory is blown away. Too fast to grab the files. So either you update for real (in which case you have the time to grab the files) or you create a symbolic link between the C:\ProgramData\LGMOBILEAX\Phone folder and another folder you create say name it C:\test. What happens is that files get extracted and then \phone folder deleted when no phone is detected but the files remain on the \test folder. So you get your files which are a "model.dll" file (in p970 case i guess something like lgp970.dll) and a .wdb file which is the firmware. How to proceed though to tinker further with the .wdb file so as to get bin file and baseband still elludes me
I bet our rom cooker knew how to unpack and repack. So, anyone?
Sent from my LG-P970 using XDA App
jimakos29 said:
to get the files out of a kdz: grab them while someone is using the KDZ program to update their phone. The files are extracted and put into "C:\ProgramData\LGMOBILEAX\Phone" but as soon as the program detects no phone the entire directory is blown away. Too fast to grab the files. So either you update for real (in which case you have the time to grab the files) or you create a symbolic link between the C:\ProgramData\LGMOBILEAX\Phone folder and another folder you create say name it C:\test. What happens is that files get extracted and then \phone folder deleted when no phone is detected but the files remain on the \test folder. So you get your files which are a "model.dll" file (in p970 case i guess something like lgp970.dll) and a .wdb file which is the firmware. How to proceed though to tinker further with the .wdb file so as to get bin file and baseband still elludes me
Click to expand...
Click to collapse
update: doing some research and it seems to extract the bin files you need lgutils and the .dll file you get from the kdz extraction but I am not at home to look into it any further.
Stable ROOT METHOD found!
You don't need this, disabling LG MODEM DEVICE under modems makes UNLOCKROOT work on every firmware! TESTED on 20N german version!
Disabling LG MODEM DEVICE under modems makes UNLOCKROOT work on every firmware! TESTED on 20N german version!
Here is the proof
http://forum.xda-developers.com/showpost.php?p=22195743&postcount=417
Here are the drivers I used:
http://forum.xda-developers.com/showpost.php?p=22196019&postcount=21
I used Windows 7 32 bit, the original poster used Win7 64 bit...
HI, SO I HAVE A lg P880 and the biggest problem i seem to have is while its flashing the kdz file its either it hangs in the log, or halfway through installation it says to please reconnect phone? Im trying to use the international phone with wind. Any ideas?
julianjoy said:
HI, SO I HAVE A lg P880 and the biggest problem i seem to have is while its flashing the kdz file its either it hangs in the log, or halfway through installation it says to please reconnect phone? Im trying to use the international phone with wind. Any ideas?
Click to expand...
Click to collapse
Make sure you have followed guide properly, disable modem if you have it (i kept drivers from root method which doesnt have modem) and make sure Windows enabler is on. Log runs for a long time when I flash, about 15 minutes before it finally reboots
Sent from my LG-P880 using Tapatalk 2
@non4 said:
Make sure you have followed guide properly, disable modem if you have it (i kept drivers from root method which doesnt have modem) and make sure Windows enabler is on. Log runs for a long time when I flash, about 15 minutes before it finally reboots
Sent from my LG-P880 using Tapatalk 2
Click to expand...
Click to collapse
I tried all this but still does not work. it does not matter what type of firmware i put right, because i am trying to install the wind firmware.
julianjoy said:
I tried all this but still does not work. it does not matter what type of firmware i put right, because i am trying to install the wind firmware.
Click to expand...
Click to collapse
Extract the .dz and .dll files from the wind .kdz and flash it with LGFLASH Tool.
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
Extract the .dz and .dll files from the wind .kdz and flash it with LGFLASH Tool.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
sorry im a noob, but how do i extract .dz file
Keep the battery in your phone during the flash
thanhma said:
Keep the battery in your phone during the flash
Click to expand...
Click to collapse
i did still nothing
julianjoy said:
sorry im a noob, but how do i extract .dz file
Click to expand...
Click to collapse
put the Firmware kdz in the "kdz-update" folder.
Run "UpTestEX_mod2_marwin" like if you were flashing the phone.
when you hit "upgrade" in the program, it will creat a temp .cab file like "V10x.cab" in the same folder "kdz-update", you need to be fast and select and copy (or drag&drop) that file to other location, desktop for example...
after you get the .cab, you just need to extract the .dz and .dll files with winrar, winzip, or other.
RuedasLocas said:
put the Firmware kdz in the "kdz-update" folder.
Run "UpTestEX_mod2_marwin" like if you were flashing the phone.
when you hit "upgrade" in the program, it will creat a temp .cab file like "V10x.cab" in the same folder "kdz-update", you need to be fast and select and copy (or drag&drop) that file to other location, desktop for example...
after you get the .cab, you just need to extract the .dz and .dll files with winrar, winzip, or other.
Click to expand...
Click to collapse
Can someone please send me a good link to a wind mobile kdz file
Hello
Is there any1 with BOOT.img from firmware B584 that could upload?
You mean the kernel, right? Sorry, no. Have just the UPDATE.APP from B594 on my phone. Maybe you can download the zip-file again and get it out of the UPDATE.APP? For what do you need this? Update because custom kernel?
Literally the kernel i have installed now (ESAL v2.0) lacks "Revoke USB Authorizations" on settings. Thats why i need that specific one. (removing data/misc/adb/adb-keys doesnt help)
metonator said:
Literally the kernel i have installed now (ESAL v2.0) lacks "Revoke USB Authorizations" on settings. Thats why i need that specific one. (removing data/misc/adb/adb-keys doesnt help)
Click to expand...
Click to collapse
I'm too lazy to get boot.img for you, but there is a work around for your problem.
If you are using windows go to C:\Users\<your_windows_user_name is_here>\.android
(If using linux I don't know where to go)
Copy adbkey.pub in your device and rename it "adb_keys" with no filename end.
On your device move it in to data/misc/adb/ and probably not important but permissions are -rw-r----- .
Restart adb.
This has worked for me earlier, I hope I didn't forgot anything important.
Also you can use huaweiupdate extractor to get boot.img from update.app.
keikari said:
I'm too lazy to get boot.img for you, but there is a work around for your problem.
If you are using windows go to C:\Users\<your_windows_user_name is_here>\.android
(If using linux I don't know where to go)
Copy adbkey.pub in your device and rename it "adb_keys" with no filename end.
On your device move it in to data/misc/adb/ and probably not important but permissions are -rw-r----- .
Restart adb.
This has worked for me earlier, I hope I didn't forgot anything important.
Also you can use huaweiupdate extractor to get boot.img from update.app.
Click to expand...
Click to collapse
Will try tonight if this method will work
Just use adbd insecure
Ok, extracted it myself (took a bit, but at least it works). Here's the file in case someone will search for it.
metonator said:
Ok, extracted it myself (took a bit, but at least it works). Here's the file in case someone will search for it.
Click to expand...
Click to collapse
thks im looking for that
Hi I tried to install a new Rom Ive had experience before in doing this so thought it would be like the countless other times ive done on Samsung.
Ive unlocked
Ive installed a recovery (did have TWRP but now using PitchBlack)
It says I dont have any download or storage in recovery
stuck in fastboot
When using MiFlash (which Ive no experience of)error message, see attached image.
Any help in next steps be much appreciated.
In the folder where rom is, create an empty folder and rename it to log.
Then try reflashing. It should work
Cheers
i dont have the rom on my phone anymore and miflash is giving that error
abhi24365 said:
In the folder where rom is, create an empty folder and rename it to log.
Then try reflashing. It should work
Cheers
Click to expand...
Click to collapse
any other ideas bud?
needs to do testpoint and flash china rom using miflash tool+authorized account
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
for the screenshot means your windows doesnt support the miflash tool
you need to switch to other windows 7 pc
I got the log folder done now giving this error:
checasey said:
I got the log folder done now giving this error:
Click to expand...
Click to collapse
That's not an error, it means it's done installing your drivers
oh really?!! what do I do now then?
cheers for the help
trying to install stock rom using miflash, it says cannot find file flash_all_lock.bat anyone help?
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
hallowinx said:
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
Click to expand...
Click to collapse
Ill give this a whirl thank you
hallowinx said:
Hi, it happened yesterday, I did the following:
1- download my flash last
2-decompress my flash and create empty folder with the name of log inside what was decompressed
3-download compatible firmware in .tgz format not in .zip
4- unzip .tgz file on disk C, rename the folder to raphaeli (I don't know if necessary, I don't think so I did).
5- open miflash, install drivers.
6-find the raphaeli folder and click on refresh.
7- uncheck the box below where it says block if this is not the case.
I hope you understand me, sorry for the English use a translator
Click to expand...
Click to collapse
how do you download in .tgz format?
checasey said:
how do you download in .tgz format?
Click to expand...
Click to collapse
or sorry how do you unzip a .tgz file it does not give that option?
checasey said:
or sorry how do you unzip a .tgz file it does not give that option?
Click to expand...
Click to collapse
You don't unzip the .tgz file. You flash the .tgz file using MiFlash. Before you flash the file make sure the "clean all and lock" on the bottom right corner IS NOT SELECTED. If you flash it with it selected it will lock your bootloader and you will most likely brick your phone.
I just got the .tgz file but now getting this error, anyone able to help? please im begging at this stage!!!
checasey said:
I just got the .tgz file but now getting this error, anyone able to help? please im begging at this stage!!!
Click to expand...
Click to collapse
Try extracting the tgz file into C: drive. If you see an image folder flash that folder
Bubble Tea said:
Try extracting the tgz file into C: drive. If you see an image folder flash that folder
Click to expand...
Click to collapse
Getting this error. Everything is done exactly as it should be not sure whats the problem
Can you show pictures of what's inside of the folder you're trying to flash.
Bubble Tea said:
Can you show pictures of what's inside of the folder you're trying to flash.
Click to expand...
Click to collapse
yeah sure, i attached the folder. i really appreciate the help
checasey said:
yeah sure, i attached the folder. i really appreciate the help
Click to expand...
Click to collapse
EDITED.
My bad. Failed to notice you're not showing file extensions, so didn't realise the .bat files are actually there. Ignore original post.
After seeing the error have you tried booting into the phone?
Many times users say they get an error at the end of flashing with the Mi Flash Tool, but after, they can boot into MIUI and everything is fine. Not seen this error myself, so don't know if it's the same as your seeing.