[Q] Galaxy Note N7000 Noob questions (I have done my research) - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

This has a happy ending even though it is a whopping 3 posts long lmao!
I would like to give Antiochasylum some recognition. His rom solely pulled this Galaxy Note out of a HardBrick! Thank you for providing this rom
This is the rom that was used!
[ROM][KANG][ICS][AOSP/CM9]Asylum ICS 08[5-31-2012]
http://forum.xda-developers.com/showthread.php?t=1650413
Kernel: Abyss Note Kernel 42CWT Touch Custom Logo
Firmware: None (There is a folder in the root of the phone for firmware but nothing is in it, I am using the Recovery Aroma File Manager)
Model: GT-N7000 (Not the AT&T version)
CWM Version: 5.8.1.5 Touch (Thanks to the Abyss Kernel)
I guess this info would also be good, The Yellow triangle shows at boot logo, as well as in Download mode the custom binary count is at 5
(Since I can't get the phone to boot into anything other than download mode and CWM the only thing I have tried is to ODIN param.tar) which gets me to the android with the weird wireframe hexagon looking thing and a load bar, then fails and spits me into CWM.
I have also tried download mode using PC ODIN 1.3, 1.87, and 3.95
When I ODIN the boot loader + Pit file it reboots into the logo and that is it
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When I ODIN the Pit + Bootloader + Rom (From what I have read you put the single file into PDA, which is what I did)It hangs on Factoryfs for ever.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> factoryfs.img
So I have a Bricked Galaxy Note GT-N7000.
Here is what happened,
My friend tried downgrading from KingDroid, to a older version for stability.
anyhow when he was in CWM he tried wiping the cache and it got stuck at the logo screen.
When I went into CWM and tried to mount or unmount /system, /data, /emmc, /cache, It would tell me failure to mount all of them.... So after tinkering with it, I was able to get everything to mount and unmount, I flashed the newest abyss kernel.
Now I am able to preform a full wipe/factory reset. Wipe the cache. and everything works in CWM now as far as wiping stuff and mounting it (I was basically having the problem of the phone not recognizing /system or any of the rest).
The only thing I get to now is,
Installing: /sdcard/update.zip (This is the stock rom from sammobile or whatever the website is called, I also tried without renaming it to update.zip)
finding update package...
opening update package...
installing update...
installation aborted.
I have searched MANY MANY ways to get this thing back to life, and through various little fix's I was able to get it to where I can preform everything but recovery and flashing the rom apparently....
He made no recovery so, that is not an option.
I have also been looking for the stock kernel which I was unable to find, probably from my own stupidity, but this is where I need help. From the 100+ threads I have read about this issue with the note, I have tried damn near all of them, and got somethings that weren't working in CWM to work, like the format thing, now I am on to flashing. If someone has a link to the stock kernel that would help greatly, as for the stock rom I am using,
N7000XXLA4_N7000OXALA4_DBT.zip
This is the one I have tried flashing, but I get installation aborted. I have tried doing it with the name above as well as renaming it update.zip
The Abyss Kernel I am using right now claims to be compatible with stock roms.
keep in mind that this thing wont boot into anything other than the splash screen for the kernel (This has only happened because I flashed the Abyss Kernel) when the screen comes up it will say Abyss bla bla bla, then at the bottom will say Loading.... I think it is safe to say there is no OS on this Note.
Now I know this phone is far from dead, I just need to know if anyone has had this same problem that has a fix that might work for this.... As I have said I have been through a hundred threads or so about bricked Notes, as well as I have tried threads that were not intended for bricked phones. I have been up for the past 3 days trying to figure this out. and have crashed my computer 2x from all of the threads I have had open in Google chrome.
I know this can be fixed, I just have to find the right one.... right Now I am at a loss.... I will keep updating this as I try new things until some one responds (Hopefully quickly). If you have any questions for me post them and I will do my best to provide good answers
sorry for the long post, I am also sorry if it is confusing I am VERY tired and just want this damned thing to freaking work!

http://forum.xda-developers.com/showthread.php?t=1667886Most stuck at factory thing are hardbricked and need mobo replacement :-(
There is thread on how fix that but its difficult. Try that
Sent from my GT-N7000 using Tapatalk 2

Hey so I checked out that thread, which I used the PIT files that he had, then I stumbled on to Asylum ICS, used the kernel that worked for the ROM installed the rom and now I am back in business.... For some reason I still cannot flash a stock rom onto the phone but I really don't care at this point.
My friend realizes that he is damned lucky that Antiochasylum's rom flashed in the first place. I will edit my first post and put his name and a link to his rom in there for recognition, not because he intentionally provided a fix but because his rom solely pulled this Galaxy Note out of the graveyard...
I also want to thank you Baz77, for replying, because honestly if you hadn't I would have just given up. Your post is what lead me to search just a LITTLE bit more for a fix...
I would change the title to say solved, but 1 I don't know how to and 2 it was a lucky fix in the first place Thank you again for your reply, I like happy endings

Glad I could help.
Sent from my GT-N7000 using Tapatalk 2

Same here. Always good to bring a note back.

Great going mate!! Happy rooting!!
KitsuKun said:
This has a happy ending even though it is a whopping 3 posts long lmao!
I would like to give Antiochasylum some recognition. His rom solely pulled this Galaxy Note out of a HardBrick! Thank you for providing this rom
This is the rom that was used!
[ROM][KANG][ICS][AOSP/CM9]Asylum ICS 08[5-31-2012]
http://forum.xda-developers.com/showthread.php?t=1650413
Kernel: Abyss Note Kernel 42CWT Touch Custom Logo
Firmware: None (There is a folder in the root of the phone for firmware but nothing is in it, I am using the Recovery Aroma File Manager)
Model: GT-N7000 (Not the AT&T version)
CWM Version: 5.8.1.5 Touch (Thanks to the Abyss Kernel)
I guess this info would also be good, The Yellow triangle shows at boot logo, as well as in Download mode the custom binary count is at 5
(Since I can't get the phone to boot into anything other than download mode and CWM the only thing I have tried is to ODIN param.tar) which gets me to the android with the weird wireframe hexagon looking thing and a load bar, then fails and spits me into CWM.
I have also tried download mode using PC ODIN 1.3, 1.87, and 3.95
When I ODIN the boot loader + Pit file it reboots into the logo and that is it
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When I ODIN the Pit + Bootloader + Rom (From what I have read you put the single file into PDA, which is what I did)It hangs on Factoryfs for ever.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> factoryfs.img
So I have a Bricked Galaxy Note GT-N7000.
Here is what happened,
My friend tried downgrading from KingDroid, to a older version for stability.
anyhow when he was in CWM he tried wiping the cache and it got stuck at the logo screen.
When I went into CWM and tried to mount or unmount /system, /data, /emmc, /cache, It would tell me failure to mount all of them.... So after tinkering with it, I was able to get everything to mount and unmount, I flashed the newest abyss kernel.
Now I am able to preform a full wipe/factory reset. Wipe the cache. and everything works in CWM now as far as wiping stuff and mounting it (I was basically having the problem of the phone not recognizing /system or any of the rest).
The only thing I get to now is,
Installing: /sdcard/update.zip (This is the stock rom from sammobile or whatever the website is called, I also tried without renaming it to update.zip)
finding update package...
opening update package...
installing update...
installation aborted.
I have searched MANY MANY ways to get this thing back to life, and through various little fix's I was able to get it to where I can preform everything but recovery and flashing the rom apparently....
He made no recovery so, that is not an option.
I have also been looking for the stock kernel which I was unable to find, probably from my own stupidity, but this is where I need help. From the 100+ threads I have read about this issue with the note, I have tried damn near all of them, and got somethings that weren't working in CWM to work, like the format thing, now I am on to flashing. If someone has a link to the stock kernel that would help greatly, as for the stock rom I am using,
N7000XXLA4_N7000OXALA4_DBT.zip
This is the one I have tried flashing, but I get installation aborted. I have tried doing it with the name above as well as renaming it update.zip
The Abyss Kernel I am using right now claims to be compatible with stock roms.
keep in mind that this thing wont boot into anything other than the splash screen for the kernel (This has only happened because I flashed the Abyss Kernel) when the screen comes up it will say Abyss bla bla bla, then at the bottom will say Loading.... I think it is safe to say there is no OS on this Note.
Now I know this phone is far from dead, I just need to know if anyone has had this same problem that has a fix that might work for this.... As I have said I have been through a hundred threads or so about bricked Notes, as well as I have tried threads that were not intended for bricked phones. I have been up for the past 3 days trying to figure this out. and have crashed my computer 2x from all of the threads I have had open in Google chrome.
I know this can be fixed, I just have to find the right one.... right Now I am at a loss.... I will keep updating this as I try new things until some one responds (Hopefully quickly). If you have any questions for me post them and I will do my best to provide good answers
sorry for the long post, I am also sorry if it is confusing I am VERY tired and just want this damned thing to freaking work!
Click to expand...
Click to collapse

Related

Odin Stuck, Barely Got to Download Mode

Hey all,
I've softbricked my Captivate and back to download mode using a JIG. It took me awhile to get it there as well. Anyhow, my phone is connected to the PC and is recognized by the OS and Odin3 3 Button Fix v1.81. It is not detected by Odin 1 click. When I attempt to flash back to stock, Odin REALLY enjoys to "setupconnection" with my phone. So much so it stays there for 10+ mins. I've heard people say that the PDA check box causes this issue. I've flashed to stock before and it hasn't been an issue until now. I was wondering if I can leave out the PDA.zip just to get back to stock 2.1. Would there be many ill effects? Especially if I'm just going to flash to a custom ROM?
I was on CM7 Nightly build 14. I attempted to recover back to Phoenix Ultimate using CWM. It failed when installing something that had to do with boot. Should I also add a bootloader file to the Odin install?
Thanks!
Just restart your PC and try one click odin...if Odin 1.8 is detecting then one click odin should also detect IMO...
I am not 100% sure but you do need PDA to flash to stock...try Icezar's package, its safest way to flash to stock..
Not really an answer to your question, but did you have repartition checked when you used odin? To return stock?
Sent from my GT-I9000 using XDA App
I did have re-partition clicked. I got the same results with and without it clicked. I had it showing up in Odin 1 click, but that got stuck with file analysis or the like. Now I have the Phone ! PC screen and I'm not sure how to proceed.
EDIT: Sorry for lying, back in download.
EDIT: Using Icezar's Package
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So, Odin was flashing and the battery fell out. /cry
JIG now opens Phone ! PC screen and the Odin won't recognize it. I've had Odin opened first and loaded all information before hand. No luck so far.
Any tips?
EDIT: New Captivate coming from ATT. Thanks for the help everyone!

[Q] Galaxy Note bricked? No. Problem solved.

This is the situation:
Windows XP 32bit
Galaxy Note with LA4
Odin V1.85
KIES latest version
Latest Android SDK
I tried today to downgrade to a directly rootable stock ROM. It failed?
My Note stucks on the bootscreen.
I can put the Note in the downloadmode. When I start Odin, I see a yellow box under ID:COM with 0:[COM7], so my computer sees the Note. I want to flash the rootable stock ROM as described in many threads, especially following Dr. Ketans Guide
But it fails, it stucks at Initialzation..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
I tried the LA4 stock ROM, same problem.
After this I have putted the Note in recovery mode and this is what I see:
"E:failed to mount /sdcard (Unknown error: 0)"
"E:install_application_for_customer:Can't mount /sdcard"
" your storage not prepared yet. please use UI menu for format and reboot actions."
"copy application failed"
In the recovery mode I tried Factory reset and Wipe cache...no effect.
Since 4pm I have tried many things, read threads and posts, but nothing has solved my problem. By the way I have not seen a problem as described above no where. Is there a genius who can solve this/my problem?
Or is my Note bricked?
The only thing i can see is that it can't mount the SD. Other than that, i don't know. And you know i had my own problems yesterday, so i'm not in the position to know what might be wrong. But one thing is sure, it's not bricked since you can enter download mode.
I know it's frustrating, but you'll have to wait for somebody that knows some things about Odin. I used it myself for the first time yesterday since the Note is my first Samsung device.
Sent from my iPad GT-N7000 using xda premium
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
dnyc said:
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
Click to expand...
Click to collapse
Connect to Kies and see if your phone is beeing recognized. If not reinstall the usb drivers. Reboot the phone and pc afterwards and try again. ENABLE USB DEBUGGING in settings also.
Hope it helps
I think this is related to SD card.(Internal)
Have you try using repartition?
I think it may work, NOTE THIS is just my thinking, I can't take any guarranty, you may use at your own risk, if other measures failed
Flash with repartition selected, n selecting pit file
here attached it (extract before use)for note 16GB (routine, not for 32GB)
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
dnyc said:
see if you can turn off the note. press and hold volume + power and home to get to cwm.. do a data factory reset. then flash with odin in download mode. also make sure you put the correct files in odin when flashing. i had the same problem with my sg2 a few months back when i was fresh with android os. i spent 4 hours figuring it out when it only took 5 mins to fix lol.
Click to expand...
Click to collapse
As you can read I did trie data factory reset, after flash with Odin it didn't work. Thanks for your help.
gee2012 said:
Connect to Kies and see if your phone is beeing recognized. If not reinstall the usb drivers. Reboot the phone and pc afterwards and try again. ENABLE USB DEBUGGING in settings also.
Hope it helps
Click to expand...
Click to collapse
As you can read I can't ENABLE USB DEBUGGING, because I can't start my Note up normally. Thanks for your help.
Loftus said:
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Thanks, but no effect.
dr.ketan said:
I think this is related to SD card.(Internal)
Have you try using repartition?
I think it may work, NOTE THIS is just my thinking, I can't take any guarranty, you may use at your own risk, if other measures failed
Flash with repartition selected, n selecting pit file
here attached it (extract before use)for note 16GB (routine, not for 32GB)
Click to expand...
Click to collapse
With the pit-file it showed PASS!:
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
<ID:0/006> Added!!
At my screen the following:
Firmware upgrade encountered an isseu.
Please select recovery mode in Kies & try again
If I open Kies to select recevory mode it asks for a recovery code. I tried some codes like 0000,1234 and others, but no good...
Then, I entered the download mode of the Note and tried a flash with KK9 (one file) it shows PASS:
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
<ID:0/006> zImage
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
....and it works now for me!!! I thought it was wipe, but I have now with KK9 the same apps and configuration as before on the LA4. Weird but good for me!
All of you thanks for your help, especially dr.Ketan
Note not bricked.
Problem solved.
And the problem was?
Sent from my GT-N7000 using xda premium
Read my first post...
got the same problem, did all you did, but get "fail" after is starts working.
any suggest?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
thanks
Caesarea038 said:
With the pit-file it showed PASS!:
....and it works now for me!!! I thought it was wipe, but I have now with KK9 the same apps and configuration as before on the LA4. Weird but good for me!
All of you thanks for your help, especially dr.Ketan
Click to expand...
Click to collapse
Really glad to hear.
It is really painful when some one say bricked lovely device.
its ok now, congratulation.
it is advisable once you format internal SD card. Not in hurry, but at least before next update.
Sent from my GT-N7000 using xda premium
shaharda said:
got the same problem, did all you did, but get "fail" after is starts working.
any suggest?
<ID:0/005> Added!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
...........................
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
thanks
Click to expand...
Click to collapse
Can you tell me exactly the problem and what you did step by step?
Loftus said:
Reflash stock rom with a different usb port and cable
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Today I figured something out:
If you encounter problems with rooting/flashing try another or original USB cable, maybe a different USB port....
My problem as described in my first post was a combination of a fail USB cable and a software problem.
thanks for the help.
i'll try to replace my cable and try a new port.
what i did is trues to flash xxla4 from criskelo with Odin.
while doing that yhe action was breaked an since than i get the massege "an issue encountered...".
i tried almost everything (all i knew and mange to find in the net): tried again with odin, tried to flash 5 different roms from the list in dr.ketan thread.
tries to boot into recovery (no success), tried to recover with kies (it is not being identified by it).
now the battary won't charge. need to send it to the Lab.
thanks anyway. (i'll as them what they did)
shaharda said:
thanks for the help.
i'll try to replace my cable and try a new port.
what i did is trues to flash xxla4 from criskelo with Odin.
while doing that yhe action was breaked an since than i get the massege "an issue encountered...".
i tried almost everything (all i knew and mange to find in the net): tried again with odin, tried to flash 5 different roms from the list in dr.ketan thread.
tries to boot into recovery (no success), tried to recover with kies (it is not being identified by it).
Click to expand...
Click to collapse
Can you enter DOWNLOAD MODE?

[Q] Unable to do Data factory reset....

Hi Guys,
Don't know what happened, and now I am unable to do
Data data factory reset through CWM
Unable to install rom through Odin
Unable to install rom through CWM
Unable to restore my Backup (its giving error while restoring data)
Anybody please help me...
hakimkkb4u said:
Hi Guys,
Don't know what happened, and now I am unable to do
Data data factory reset through CWM
Unable to install rom through Odin
Unable to install rom through CWM
Unable to restore my Backup (its giving error while restoring data)
Anybody please help me...
Click to expand...
Click to collapse
Please share how you tried flashing ROM using Odin.. because if none of the above doesn't work , as least PC Odin flash should work for sure..
I tried via odin but it stuck on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
hakimkkb4u said:
I tried via odin but it stuck on
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
Click to expand...
Click to collapse
Are you attaching PIT file?? If not try different version of Odin.. or a different ROM. it should work.
ranjan.alva said:
Are you attaching PIT file?? If not try different version of Odin.. or a different ROM. it should work.
Click to expand...
Click to collapse
the same here, only download, odin stuck on nand write.
Ok let me try....
OK let me try any other stock Rom...
I tried different rom, different version of odin but same result...
again stuck on...
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
install the attached file with odin....
extract the file first you should get a tar file;....
flash it with odin in the PDA...
after completion...
remove battery for 30 seconds put battery in
hold home + vol up.... boot in recovery then try factory reset...
Thanks for your help....
I tried but having same problem...
able to enter in CWM but unable to do data factory reset...
while entering in CWM I am Getting this error
E:can't mount/cache/recovery/command
E:can't mount/cache/recovery/log
E:can't open/cache/recovery/log
E:can't mount/cache/recovery/last_log
E:can't open/cache/recovery/last_log
Ok Seems like you messed up your partition...
I attached new files
use the correct one based on your phone factory memory...
most likely its the 16GB but I include both just incase
Boot In Download Mode
Open Odin and load file in PIT
reboot...
Book Back in Download and load previous file I supplied
Reboot.....
the boot in recovery then Factory Reset......
antiguangenius said:
Ok Seems like you messed up your partition...
I attached new files
use the correct one based on your phone factory memory...
most likely its the 16GB but I include both just incase
Boot In Download Mode
Open Odin and load file in PIT
reboot...
Book Back in Download and load previous file I supplied
Reboot.....
the boot in recovery then Factory Reset......
Click to expand...
Click to collapse
Tnx for this. I was able to boot into recovery and did a Factory Reset. Weird, it took so long to format data.
I am now trying to flash my ROM. Hope it will work.
Cheers!
armic said:
Tnx for this. I was able to boot into recovery and did a Factory Reset. Weird, it took so long to format data.
I am now trying to flash my ROM. Hope it will work.
Cheers!
Click to expand...
Click to collapse
good luck buddy..... I'm glad you got further.......
antiguangenius said:
good luck buddy..... I'm glad you got further.......
Click to expand...
Click to collapse
Got /System error when trying to restore my NAND BACKUP...
Tried to Flash ROM from ZIP. Finished but took so long.
Rebooted and got stuck in SAMSUNG GALAXY Note logo...
Any suggestions?
antiguangenius said:
install the attached file with odin....
extract the file first you should get a tar file;....
flash it with odin in the PDA...
after completion...
remove battery for 30 seconds put battery in
hold home + vol up.... boot in recovery then try factory reset...
Click to expand...
Click to collapse
Are you aware, you are advising will raise flash counter?
armic said:
Got /System error when trying to restore my NAND BACKUP...
Tried to Flash ROM from ZIP. Finished but took so long.
Rebooted and got stuck in SAMSUNG GALAXY Note logo...
Any suggestions?
Click to expand...
Click to collapse
are you sure you're the correct rom??
whats the exact model of your device???
---------- Post added at 03:27 AM ---------- Previous post was at 03:25 AM ----------
dr.ketan said:
Are you aware, you are advising will raise flash counter?
Click to expand...
Click to collapse
yes I do but am sure he already raised it before.... the chap is stuck, i'm guessing anything that works he will be happy with... he did have a custom rom before.... so that flag has been up long time...
mine seems to be stuck at set partition was i rigght in leaving re partition in odin to on
unbale to do restore factory setting after root my cell
hi frnds plz help me..yesterday i rooted my phone mmx a70..i flashed cwm recovery..bt when i tried to make back up of existing rom my cell jst boot n stuck at logo..i removed battry turnd my phone on its working..then i tried to restore factory setting bt same thing happend phone stuck at logo ntnhg happens.help me guyzz..i m also not able to go to the boot screen....
Flash Abyss kernel and try it.. should be ok..
Just download abyss kernel and flash it via cwm and then use redpill recovery to do all your stuff.. it worked for me.. even data can be restored pretty easily.. or even backed up...
sudhanshu124 said:
hi frnds plz help me..yesterday i rooted my phone mmx a70..i flashed cwm recovery..bt when i tried to make back up of existing rom my cell jst boot n stuck at logo..i removed battry turnd my phone on its working..then i tried to restore factory setting bt same thing happend phone stuck at logo ntnhg happens.help me guyzz..i m also not able to go to the boot screen....
Click to expand...
Click to collapse
antiguangenius said:
Ok Seems like you messed up your partition...
I attached new files
use the correct one based on your phone factory memory...
most likely its the 16GB but I include both just incase
Boot In Download Mode
Open Odin and load file in PIT
reboot...
Book Back in Download and load previous file I supplied
Reboot.....
the boot in recovery then Factory Reset......
Click to expand...
Click to collapse
Bro....
Can you help me on this?
I download your file and put in PIT and start...
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
it stuck here.
any suggestion?
I think I have same problem o S4 L720
antiguangenius said:
Ok Seems like you messed up your partition...
I attached new files
use the correct one based on your phone factory memory...
most likely its the 16GB but I include both just incase
Boot In Download Mode
Open Odin and load file in PIT
reboot...
Book Back in Download and load previous file I supplied
Reboot.....
the boot in recovery then Factory Reset......
Click to expand...
Click to collapse
Hi xda, I have A sprint S4 flashed to Boost Mobile . I rooted (twrp) it using odin ,and I was trying to get the free Hot Spot . I was told to download two files to my sd card and rename them in the system file and them to copy and paste them in from my sd to the system file . When I tried to do that ( I did multi select ) only one file pasted but it didn't past in systems not sure where it went . I checked the sd and one was missing so I powered it off and replaced the one that was missing . When I started my phone up it froze on the yellow Sprint screen , I did some research and im not sure what I tried in odin but when it rebooted it's now stuck on the Samsung Galaxy Screen ! I tried odin to go back stock and I tried the unbrick methods and it keep failing . I've tried all the trouble shooting methods I could find .I tried factory reset , wipes and nothing worked for me .I also stop all Kies services from task manager, And when odin fails it says :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720TVPUAMK5_L720TSPTAMK5_L720TVPUAMK5_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I think I need a pit file for S4 L720 Thanks!!

[Q] What happened to my Note? Revival ideas?

Hi guys, I am desperate and in need of help ...apparently my Note decided to die on me and I think I just made it worse. Please whoever has any suggestions please help me.
For a good while now I had been running Paranoid Android without any problems whatsoever until last friday my phone woke up stuck on the start screen (the one that says GT-N7000). Please note that NO changes were made to the system nor were any new apps installed. Rebooting the phone resulted in the same situation.
After noticing that it was stuck, I figured I would go into recovery and try clearing cache as that sometimes will help, to my surprise the phone was unable to go into recovery, it would just present a blank screen.
I could still go into download mode, so I thought I would go back to stock through ODIN eand re-root and re-flash, when i tried this ODIN hanged at this point:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
I tried several GB and two JB stock ROMs, both ended up with the same results. I also tried flashing this through ODIN 1.83, 1.85 and 3.07 with no luck.
Then I got worried that my phone had somehow gotten bricked (overnight with no change which I know does not make sense), and I found forest1971 thread on how to revive a bricked Note. Following this thread I tried all PIT files from 2.0 up to 2.5 and ODIN hanged at this point:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
After this I got really desperate, so I went ahead and tried the manual method, and tried flashing Speedmod kernel in order to be able to access recovery again as is instructed in the thread. ODIN hangs during this process as well, thus not installing the Kernel but it did give me the yellow triangle and increased my binary flash count. I had managed to avoid this throughout my whole 10 months of owning the phone by doing things correctly, and now I cannot send it to Samsung even though I would still have 2 months worth of warranty eliminating the possibility of sending it back to them.
So in summary I can't access recovery, I can't flash a stock ROM, I can't flash kernels and now I have the yellow triangle. Please also note that I have tried with several USB cables, updated drivers and several PCs.
What can I do about this? Is there still some sort of hope for my phone? Can the triangle be somehow removed without access to recovery or the ROM? and finally how on earth could my phone do this from one night to the other without me installing or doing anything to it?
Thank you very much, any ideas will be greatly appreciated.

[Q] Root Problem

Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x

Categories

Resources