Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x
Related
First of all I'm a beginner in android world .
Kernal: 2.6.32.9
[email protected] #1
The problem is:
I was trying to root my Galaxy S I9000 following the steps of [GUIDE] And then there was ROOT !
Everything was great until this step:
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
Odin gave me a red flag with " Failed " and I got this message:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I unpulged my device and turned it off, when I turned it on a device-!- computer screen appered, after many tries I took off the battery and put it then I pressed the three combo button, finally I managed to get to download mode.
Now:
-My computer recognizes the device but Kies doesn't ( although it's the latest version and I tried to reinstall the drivers.)
-Odin keeps giving me the same error, and sometimes it stay stop at <ID:0/009> SetupConnection.. ( I tried XWKDD_insecure.tar & KE2_original.zip )
-I'm stuck in download mode.
Please help me get my phone to work (I prefer to return to the same firmware if it's possible).
https://www.wuala.com/Samsung Galax...and Odin/Original Firmwares/?key=AfzUZSU4SpKU
Download your original firmware from here and flash it in odin.
E: Btw are you using latest odin?
I got same problem when i m newb so calm down first go to www.samfirware.com and select ur phone download latest europen rom it is JVR and then flash them via odin by putting file respectively
Sent from my GT-I9000 using XDA App
This has a happy ending even though it is a whopping 3 posts long lmao!
I would like to give Antiochasylum some recognition. His rom solely pulled this Galaxy Note out of a HardBrick! Thank you for providing this rom
This is the rom that was used!
[ROM][KANG][ICS][AOSP/CM9]Asylum ICS 08[5-31-2012]
http://forum.xda-developers.com/showthread.php?t=1650413
Kernel: Abyss Note Kernel 42CWT Touch Custom Logo
Firmware: None (There is a folder in the root of the phone for firmware but nothing is in it, I am using the Recovery Aroma File Manager)
Model: GT-N7000 (Not the AT&T version)
CWM Version: 5.8.1.5 Touch (Thanks to the Abyss Kernel)
I guess this info would also be good, The Yellow triangle shows at boot logo, as well as in Download mode the custom binary count is at 5
(Since I can't get the phone to boot into anything other than download mode and CWM the only thing I have tried is to ODIN param.tar) which gets me to the android with the weird wireframe hexagon looking thing and a load bar, then fails and spits me into CWM.
I have also tried download mode using PC ODIN 1.3, 1.87, and 3.95
When I ODIN the boot loader + Pit file it reboots into the logo and that is it
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When I ODIN the Pit + Bootloader + Rom (From what I have read you put the single file into PDA, which is what I did)It hangs on Factoryfs for ever.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> factoryfs.img
So I have a Bricked Galaxy Note GT-N7000.
Here is what happened,
My friend tried downgrading from KingDroid, to a older version for stability.
anyhow when he was in CWM he tried wiping the cache and it got stuck at the logo screen.
When I went into CWM and tried to mount or unmount /system, /data, /emmc, /cache, It would tell me failure to mount all of them.... So after tinkering with it, I was able to get everything to mount and unmount, I flashed the newest abyss kernel.
Now I am able to preform a full wipe/factory reset. Wipe the cache. and everything works in CWM now as far as wiping stuff and mounting it (I was basically having the problem of the phone not recognizing /system or any of the rest).
The only thing I get to now is,
Installing: /sdcard/update.zip (This is the stock rom from sammobile or whatever the website is called, I also tried without renaming it to update.zip)
finding update package...
opening update package...
installing update...
installation aborted.
I have searched MANY MANY ways to get this thing back to life, and through various little fix's I was able to get it to where I can preform everything but recovery and flashing the rom apparently....
He made no recovery so, that is not an option.
I have also been looking for the stock kernel which I was unable to find, probably from my own stupidity, but this is where I need help. From the 100+ threads I have read about this issue with the note, I have tried damn near all of them, and got somethings that weren't working in CWM to work, like the format thing, now I am on to flashing. If someone has a link to the stock kernel that would help greatly, as for the stock rom I am using,
N7000XXLA4_N7000OXALA4_DBT.zip
This is the one I have tried flashing, but I get installation aborted. I have tried doing it with the name above as well as renaming it update.zip
The Abyss Kernel I am using right now claims to be compatible with stock roms.
keep in mind that this thing wont boot into anything other than the splash screen for the kernel (This has only happened because I flashed the Abyss Kernel) when the screen comes up it will say Abyss bla bla bla, then at the bottom will say Loading.... I think it is safe to say there is no OS on this Note.
Now I know this phone is far from dead, I just need to know if anyone has had this same problem that has a fix that might work for this.... As I have said I have been through a hundred threads or so about bricked Notes, as well as I have tried threads that were not intended for bricked phones. I have been up for the past 3 days trying to figure this out. and have crashed my computer 2x from all of the threads I have had open in Google chrome.
I know this can be fixed, I just have to find the right one.... right Now I am at a loss.... I will keep updating this as I try new things until some one responds (Hopefully quickly). If you have any questions for me post them and I will do my best to provide good answers
sorry for the long post, I am also sorry if it is confusing I am VERY tired and just want this damned thing to freaking work!
http://forum.xda-developers.com/showthread.php?t=1667886Most stuck at factory thing are hardbricked and need mobo replacement :-(
There is thread on how fix that but its difficult. Try that
Sent from my GT-N7000 using Tapatalk 2
Hey so I checked out that thread, which I used the PIT files that he had, then I stumbled on to Asylum ICS, used the kernel that worked for the ROM installed the rom and now I am back in business.... For some reason I still cannot flash a stock rom onto the phone but I really don't care at this point.
My friend realizes that he is damned lucky that Antiochasylum's rom flashed in the first place. I will edit my first post and put his name and a link to his rom in there for recognition, not because he intentionally provided a fix but because his rom solely pulled this Galaxy Note out of the graveyard...
I also want to thank you Baz77, for replying, because honestly if you hadn't I would have just given up. Your post is what lead me to search just a LITTLE bit more for a fix...
I would change the title to say solved, but 1 I don't know how to and 2 it was a lucky fix in the first place Thank you again for your reply, I like happy endings
Glad I could help.
Sent from my GT-N7000 using Tapatalk 2
Same here. Always good to bring a note back.
Great going mate!! Happy rooting!!
KitsuKun said:
This has a happy ending even though it is a whopping 3 posts long lmao!
I would like to give Antiochasylum some recognition. His rom solely pulled this Galaxy Note out of a HardBrick! Thank you for providing this rom
This is the rom that was used!
[ROM][KANG][ICS][AOSP/CM9]Asylum ICS 08[5-31-2012]
http://forum.xda-developers.com/showthread.php?t=1650413
Kernel: Abyss Note Kernel 42CWT Touch Custom Logo
Firmware: None (There is a folder in the root of the phone for firmware but nothing is in it, I am using the Recovery Aroma File Manager)
Model: GT-N7000 (Not the AT&T version)
CWM Version: 5.8.1.5 Touch (Thanks to the Abyss Kernel)
I guess this info would also be good, The Yellow triangle shows at boot logo, as well as in Download mode the custom binary count is at 5
(Since I can't get the phone to boot into anything other than download mode and CWM the only thing I have tried is to ODIN param.tar) which gets me to the android with the weird wireframe hexagon looking thing and a load bar, then fails and spits me into CWM.
I have also tried download mode using PC ODIN 1.3, 1.87, and 3.95
When I ODIN the boot loader + Pit file it reboots into the logo and that is it
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When I ODIN the Pit + Bootloader + Rom (From what I have read you put the single file into PDA, which is what I did)It hangs on Factoryfs for ever.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> Sbl.bin
<ID:0/005> factoryfs.img
So I have a Bricked Galaxy Note GT-N7000.
Here is what happened,
My friend tried downgrading from KingDroid, to a older version for stability.
anyhow when he was in CWM he tried wiping the cache and it got stuck at the logo screen.
When I went into CWM and tried to mount or unmount /system, /data, /emmc, /cache, It would tell me failure to mount all of them.... So after tinkering with it, I was able to get everything to mount and unmount, I flashed the newest abyss kernel.
Now I am able to preform a full wipe/factory reset. Wipe the cache. and everything works in CWM now as far as wiping stuff and mounting it (I was basically having the problem of the phone not recognizing /system or any of the rest).
The only thing I get to now is,
Installing: /sdcard/update.zip (This is the stock rom from sammobile or whatever the website is called, I also tried without renaming it to update.zip)
finding update package...
opening update package...
installing update...
installation aborted.
I have searched MANY MANY ways to get this thing back to life, and through various little fix's I was able to get it to where I can preform everything but recovery and flashing the rom apparently....
He made no recovery so, that is not an option.
I have also been looking for the stock kernel which I was unable to find, probably from my own stupidity, but this is where I need help. From the 100+ threads I have read about this issue with the note, I have tried damn near all of them, and got somethings that weren't working in CWM to work, like the format thing, now I am on to flashing. If someone has a link to the stock kernel that would help greatly, as for the stock rom I am using,
N7000XXLA4_N7000OXALA4_DBT.zip
This is the one I have tried flashing, but I get installation aborted. I have tried doing it with the name above as well as renaming it update.zip
The Abyss Kernel I am using right now claims to be compatible with stock roms.
keep in mind that this thing wont boot into anything other than the splash screen for the kernel (This has only happened because I flashed the Abyss Kernel) when the screen comes up it will say Abyss bla bla bla, then at the bottom will say Loading.... I think it is safe to say there is no OS on this Note.
Now I know this phone is far from dead, I just need to know if anyone has had this same problem that has a fix that might work for this.... As I have said I have been through a hundred threads or so about bricked Notes, as well as I have tried threads that were not intended for bricked phones. I have been up for the past 3 days trying to figure this out. and have crashed my computer 2x from all of the threads I have had open in Google chrome.
I know this can be fixed, I just have to find the right one.... right Now I am at a loss.... I will keep updating this as I try new things until some one responds (Hopefully quickly). If you have any questions for me post them and I will do my best to provide good answers
sorry for the long post, I am also sorry if it is confusing I am VERY tired and just want this damned thing to freaking work!
Click to expand...
Click to collapse
I have the device s3 mini i8190. Ordered a device from abroad CSC was Unlocked. Now flashed the modem through the CWM and now he turns 3 seconds. hanging inscription Samsung Mini i8190 and reboots constantly. He is now in the CWM comes and mode dowloading it too. Odin stitched single-file firmware but no result so sews through CWM on кастомы but also without result. PARAM_I8190 and WIPE_I8190 not help. Service firmware from the pit file not stitched and issues
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
odenhal said:
I have the device s3 mini i8190. Ordered a device from abroad CSC was Unlocked. Now flashed the modem through the CWM and now he turns 3 seconds. hanging inscription Samsung Mini i8190 and reboots constantly. He is now in the CWM comes and mode dowloading it too. Odin stitched single-file firmware but no result so sews through CWM on кастомы but also without result. PARAM_I8190 and WIPE_I8190 not help. Service firmware from the pit file not stitched and issues
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This you manage to solve it?
I have the same error from ODIN3 3.07, though the phone is booting.
I had also a few problems with Odin3 3.07.
Using version 1.85 solved it for me.
Perhaps you give it a try...:fingers-crossed:
HI all,
Been keeping upto date with the latest X note rom for a few months now. The process was simple every time, but this one.
I had to flash in odin the AP and BL for MJ5(4.3 I believe) to get my phone to boot into safe strap . Then I would wipe clean and install new rom.
Then I had to flash the AP and BL files for the MGL version (4.4.2I believe ) for it to book back up inti kit kat.
This time though aftr my wipe, the file wouldn't flash. it froze on the screen for about 30 mins with no update on the flashing status bar...I had no choice but to upplug in. Now when I go to turn it on there is no system.
I have nandroid backups I did in safe strap but are the useless unless I can flash those safestrap??? correct? or is there a way to odin flash the system,recovery,data,cache, TAR files etc that i have from backing up in the TWRP version on safe strap.? I have been searching for hours now for a srock firmweare image that I could flash with odin and still haven't gotten even close to anything . I even tried using N900AUCECMLG_OneClickBin and the odin would flash but never reboot . I am currently digging for other options now
Thank you in advance for your help. As of now I don't have a functioning phone so if I screwed up too badly , please feel free to tell me that without sugar coating it so I can head down to at&t and buy another one.
Thank you
I also tried 900AUCUBMI9_OneClickBin.exe and I get the following error
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
and on the phone it reads the following after the error in download mode and the exe described above executed.
UDC START
SW REV CHECK FAIL:[SBL1]Fused 2 >Binary 1
No one?
There has to be an easy way to Odin stock firmware andnreset the whole device. There is only one way this phone back to working and that's going to be through this forum.. Please any advice or help would be huge
DiegoSRT8 said:
I also tried 900AUCUBMI9_OneClickBin.exe and I get the following error
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004>
<ID:0/004>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
and on the phone it reads the following after the error in download mode and the exe described above executed.
UDC START
SW REV CHECK FAIL:[SBL1]Fused 2 >Binary 1
Click to expand...
Click to collapse
I was in a similar situation yesterday, was trying to flash Knoxraid JB ROM from Kitkat ROM and screwed up, the phone stuck on boot logo, tried 900AUCUBMI9_OneClickBin.exe too but failed for several times, then I rebooted my computer and changed another USB port and it worked!
Were you on mj5 before tgis happened?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 10:45 PM ---------- Previous post was at 10:40 PM ----------
Check out the restore mj5 thread might help you out
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Hay gays.
I buy samsung galaxy s3 lte but phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?
Ask a moderator to move your post to the q&a section for the i9305 for an answer.
pleps123 said:
Hay gays.
I buy samsung galaxy s3 lte and phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?
Click to expand...
Click to collapse
what are the roms that you tried to install with odin?
what is the installed rom in your device?
"what are the roms that you tried to install with odin?"
I tried flash stock 4.4.4 xeo ,4.3,4.1.2 for GT-I9305
"what is the installed rom in your device?"
I do not know , but probably stock 4.4.4 because from what I see in download mode ,I have knox bootloader.
Try pit file with 4.4.4 stock Ron.
Unfortunately it did not help
Try with mobile Odin pro
I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12
pleps123 said:
I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12
Click to expand...
Click to collapse
If you have Knox Bootloader you can not go down to 4.1.2 Jellybean.
Choose a Sammy based original Firmware 4.3 or 4.4.
Can you got to Recovery Mode?
I had your same problem
Try to install PHILZZ recovery with odin
then go to mount and storage
select mount usb storage (you must have an sd card inside phone)
connect to your computer
put sammy rom or similar (it take some time) try not to touch usb cable
when finished flash rom!!!!!!!!