First of all I'm a beginner in android world .
Kernal: 2.6.32.9
[email protected] #1
The problem is:
I was trying to root my Galaxy S I9000 following the steps of [GUIDE] And then there was ROOT !
Everything was great until this step:
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
Odin gave me a red flag with " Failed " and I got this message:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I unpulged my device and turned it off, when I turned it on a device-!- computer screen appered, after many tries I took off the battery and put it then I pressed the three combo button, finally I managed to get to download mode.
Now:
-My computer recognizes the device but Kies doesn't ( although it's the latest version and I tried to reinstall the drivers.)
-Odin keeps giving me the same error, and sometimes it stay stop at <ID:0/009> SetupConnection.. ( I tried XWKDD_insecure.tar & KE2_original.zip )
-I'm stuck in download mode.
Please help me get my phone to work (I prefer to return to the same firmware if it's possible).
https://www.wuala.com/Samsung Galax...and Odin/Original Firmwares/?key=AfzUZSU4SpKU
Download your original firmware from here and flash it in odin.
E: Btw are you using latest odin?
I got same problem when i m newb so calm down first go to www.samfirware.com and select ur phone download latest europen rom it is JVR and then flash them via odin by putting file respectively
Sent from my GT-I9000 using XDA App
Related
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
balishared said:
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
Click to expand...
Click to collapse
i had this happen one day on my work computer when every USB device shut down for a split second during the flash....
I just had the same thing happen. I was using odin 1.3 by following this sites directions, which were the most descriptive that I could have found. I was using odin 1.3.
For the record I am using a vibrant. I was certainly nervous of unplugging my phone in the middle of a flash, which turned to a green screen, but it worked. I reran the flash process and it worked fine the second time.
Thanks for the previous post for giving me the confidence to do it.
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
i got a blackberry data cable and had no issues since. be carefull bb cable doesnt stay put BUT data rate is very fast
i had that and then had dead phone...got it replaced from ATT
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
thanku thanku...will try this. this happened yest, orange ,green, yellow screens now even 3 button not working. i even filed insurance claim. u gave me hope, will go home today, restart everythin n try.
Sorry to bump an old thread but having this issue as well.
Trying to flash back form MIUI 1.6.10.
It either does the color thing or gets stuck at factory.rfs.
EDIT: Solved by using a diff USB cable! Le fffuuuuu....
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
dohboy15 said:
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
Click to expand...
Click to collapse
Similar happened to me on an 1104 build, where did you get stuck at in Odin?
And yes mine was hard bricked, no saving she was a goner.
happened to me today
removed battery
pressed keyboard buttons to drain ALL power
with battery removed held power and 1 while plugging phone in
BAM! Download mode.
ODIN'd to victory.
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
I get this with the nice random choice of colors my screen tosses at me. is there something going on? it just sits at this for minutes on end. how long should it take before rebooting?
thanks. jom
Serena like a connection issue.
check this thread for trouble shooting tips.
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
sammusashi said:
I'm having a bit of trouble flashing froyo with Odin (it sucks that neither Samsung nor AT&T will just release an official build). My phone is rooted, and I have installed the proper Samsung and USB drivers. I run Odin as administrator and connect my phone via USB, putting it in download mode. When I hit "start" Odin gives me a bit of progress, but the phone simply sits there. I've tried multiple times and have had it sitting here for close to 30 minutes, stuck on the downloading screen. Any suggestions?
Here is all I get from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Don't waste your time with this, come see us over at Phoenix.
http://forum.xda-developers.com/showthread.php?t=892973
Click the link in my signature to see more.
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
maybe this will help
GabrielAK89 said:
Hello.
I do not know if the title is good. I will explain here what happened.
my Galaxy S was android 2.3.4 jvq. I wanted to intall a newer one, a android 4.4.x
I followed a thread about how to do that.
I tryed to root the phone uing Odin and cf-root, but it failed it. After that when i powered on the phone i get some error with phone to computer and a yellow triangle in the middle.
I founded a program on internet to "unbrick" that, but now i can only enter in download mode using the 3 buttons, and dont start in normal or recovery mode.
I tryed to flah it again uing odin with cf-root but failed every time.
the odin log says this :
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know any solution to my problem?
Thx.
Click to expand...
Click to collapse
Hi
did you already try to get back to 100% stock ROM??
-
-
i can not yet post links but if you google "galaxy s stock rom" and than the first link.
take a look here for the stock ROMS
http://www.sammobile.com/firmwares/database/GT-I9000/
it warked with another version...strange thow.
Thx.
I will try now to put again the 4.4.x
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it ( i.imgsafe.org/ce3bada933 .jpg) remove space before .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
..
Got the same problem after latest update of my note 5 SM-N9208 from Philippines.
yogiexp said:
blue screen error with chinese text i.imgsafe.org/ce3bada933 .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
Click to expand...
Click to collapse
Tried it but doesn't work.
yogiexp said:
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
Click to expand...
Click to collapse
Just found a way to get TWRP back on my note 5.
I flashed with odin the Chainfire autoroot Auto-Root-noblelte-nobleltextc-smn9208.tar.md5
Your phone will get stuck on boot screen and it will say in left upper corner "seandroid not enforcing".
Push volume down + home + on/off, to get back in download mode.
Flash with odin the TWRP file.
Now you will have working TWRP (i rooted my phone directly)
It worked for me, let me know if it worked for you.
Regards,
Pr4d0
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
dhonzik said:
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
Click to expand...
Click to collapse
thanks i think its the issue with crom unlock, but i see warning everywhere it will knockout knox! i was trying to have twrp without rooting or disable knox, but i guess i dont have choice with my model.
Dear All,
It's my first time converting from iPhones to Android. Happy to join this community to learn and share.
It was my first amateur experience flashing my Galaxy Note 9.
Basically, I flashed an incorrect BL file at Odin after OEM Unlock. Phone was running Android 9 and it was a N960N (Korean Model).
I downloaded the BL file from another forum that was apparently supposedly to be only flashed inside TWRP.
I was stupid enough to change that zip file into a .tar file.
After a successful flash at BL, the phone seems to be bricked. It is unable to go into recovery or download mode.
I've tried
1. (vol down + bixby + power)
2. (vol up + bixby + power)
3. (vol down + bixby)
Whenever I do this, the following message just keeps getting prompted "KERNEL REV. CHECK FAIL DEVICE:3 BINARY: 2 (BOOT)
The computer can't detect the phone anymore....
I was stupid. Please advise me. Could it be that on the hardware volume down button is faulty? I was having a hard time bringing it to download mode at the beginning. I used recovery mode to boot into download mode and then made this big mistake.
I brought it to a repair shop, they said the volume down button is working so its more likely software problem.......
Any solution?
Thank you in advance.
This is the Odin Log
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 8 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cm.bin
<ID:0/009> keystorage.bin
<ID:0/009> sboot.bin
<ID:0/009> up_param.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Seems like that the OS installed correctly on your device. What is the issue you are having?
For download mode , try vol down + Bixby and insert usb.
https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960N
chick this site to download the room compatible with your phone
for download mode
1. (vol down + bixby + power) and Connect the mobile phone to the charging cable at the same time