Database Develop

One Click to stock wont work

I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!

Are you starting up Odin before you put the phone into download mode?
I've had Odin stop at various places before. The method that works for me is having Odin up and running, power off phone, remove battery & sim, hold vol up and down, put battery in, plug in usb.
Check this out for more suggestions, http://forum.xda-developers.com/showthread.php?t=819105

darcjrt said:
I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!
Click to expand...
Click to collapse
This is normal behavior, you need to let the blue/purple screen go, it will eventually reboot and you will be fine.

[Q] HELP! Att logo keeps popping up. not starting

Ok. I tried to flash with odin3. And in the middle of it, it just stopped on refresh(in blue) , then the battery kept popping up. But it never showed how much battery just the loading sign in it. and when i took the cord out and tried to turn it on the at&t logo just started doing the same thing. It just pops up over and over agian. I dont know if i bricked my phone or what. Can Some one please help
Oh and its not letting me get into download mode and my computer isnt even identifing it

foxxxx said:
Ok. I tried to flash with odin3. And in the middle of it, it just stopped on refresh(in blue) , then the battery kept popping up. But it never showed how much battery just the loading sign in it. and when i took the cord out and tried to turn it on the at&t logo just started doing the same thing. It just pops up over and over agian. I dont know if i bricked my phone or what. Can Some one please help
Click to expand...
Click to collapse
Put the phone in DL mode and reflash stock rom

Its not going into Dl mode

foxxxx said:
Its not going into Dl mode
Click to expand...
Click to collapse
How are you trying to put it into DL mode? Did you try using Odin to put it into DL mode?

zelendel said:
How are you trying to put it into DL mode? Did you try using Odin to put it into DL mode?
Click to expand...
Click to collapse
Here is the message i go before it happened if that helps
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
ANd i pressed the volume up and down button and insers the usb. I tried all the buttons then plugging in the usb cord to. Nothing works. my computer doenst even recognize it

foxxxx said:
Here is the message i go before it happened if that helps
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
ANd i pressed the volume up and down button and insers the usb. I tried all the buttons then plugging in the usb cord to. Nothing works. my computer doenst even recognize it
Click to expand...
Click to collapse
Hmm that is normal as then it reboots into recovery and then loads the update zip. Might need to look into making a jig for it

Bricked after using odin3

First of all I'm a beginner in android world .
Kernal: 2.6.32.9
[email protected] #1
The problem is:
I was trying to root my Galaxy S I9000 following the steps of [GUIDE] And then there was ROOT !
Everything was great until this step:
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
Odin gave me a red flag with " Failed " and I got this message:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I unpulged my device and turned it off, when I turned it on a device-!- computer screen appered, after many tries I took off the battery and put it then I pressed the three combo button, finally I managed to get to download mode.
Now:
-My computer recognizes the device but Kies doesn't ( although it's the latest version and I tried to reinstall the drivers.)
-Odin keeps giving me the same error, and sometimes it stay stop at <ID:0/009> SetupConnection.. ( I tried XWKDD_insecure.tar & KE2_original.zip )
-I'm stuck in download mode.
Please help me get my phone to work (I prefer to return to the same firmware if it's possible).

https://www.wuala.com/Samsung Galax...and Odin/Original Firmwares/?key=AfzUZSU4SpKU
Download your original firmware from here and flash it in odin.
E: Btw are you using latest odin?

I got same problem when i m newb so calm down first go to www.samfirware.com and select ur phone download latest europen rom it is JVR and then flash them via odin by putting file respectively
Sent from my GT-I9000 using XDA App

[Q] Odin not working - Is phone completely dead?

I was trying to install CM7 from Apex10 and ran the bootloaders and something went wrong.. phone was completely off (nothing just blank, no key combinations worked)
I went to download mode using JIG and tried to go to stock and it kept stuck at this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I tried many times, it just stops at this point or later.. but never succeeds..
is this totally gone?
any solution pls?
Thanks.

Try a different usb port , check if ur running odin as admin, try different odin vs. and if it's still a no go try another calbe. It's not totally gone 'till it boots up

Its just stopping at this point:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> factoryfs.rfs
Its almost 30min..
Any more ideas...

I had the same thing happening to my phone a lil while back. I've got pass that issue by pulling the cable and the battery, restarting odin and connecting usb to the port that worked in the past (com4 in my case).

Thanks for sticking with me.. I tried another laptop and I was able to get the stock.. Now am more confident to play with this toy..with JIG in hand

Woot +1 on the JIG

Woot for unbrickable mod
Sent from my unbrickable cappy *bam*

ohh yahh me 2!!!!

[Q]

Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?

lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it

lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first

zacthespack said:
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
Click to expand...
Click to collapse
yes odin said it was successfull..
vijai2011 said:
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
Click to expand...
Click to collapse
yes.. where can i get such an older stock gb rom?

lol4it said:
yes odin said it was successfull..
yes.. where can i get such an older stock gb rom?
Click to expand...
Click to collapse
They in development section.Its a sticky thread.BTW if you dont bother about loosing your sd-card data and about binary counter,flash darkyrom 3.4-RE.Since it repartitions your phone,you must be fine...

i dont care about dat data... backuped everthing..
i just want my phone to work..

lol4it said:
i dont care about dat data... backuped everthing..
i just want my phone to work..
Click to expand...
Click to collapse
Ok thn better flash darkyrom_note 3.4 RE.Its in development section.But it will increase the counter and give yellow triangle for sure...

where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/

lol4it said:
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
Click to expand...
Click to collapse
Yeah thats the one...

Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
theres written in blue RESET in odin.. what shall i do?
EDIT:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
ok finished but my screen is still black Oo
EDIT 2:
said nothing.. i love u dude and i dont care about dat triangle..