Ok. I tried to flash with odin3. And in the middle of it, it just stopped on refresh(in blue) , then the battery kept popping up. But it never showed how much battery just the loading sign in it. and when i took the cord out and tried to turn it on the at&t logo just started doing the same thing. It just pops up over and over agian. I dont know if i bricked my phone or what. Can Some one please help
Oh and its not letting me get into download mode and my computer isnt even identifing it
foxxxx said:
Ok. I tried to flash with odin3. And in the middle of it, it just stopped on refresh(in blue) , then the battery kept popping up. But it never showed how much battery just the loading sign in it. and when i took the cord out and tried to turn it on the at&t logo just started doing the same thing. It just pops up over and over agian. I dont know if i bricked my phone or what. Can Some one please help
Click to expand...
Click to collapse
Put the phone in DL mode and reflash stock rom
Its not going into Dl mode
foxxxx said:
Its not going into Dl mode
Click to expand...
Click to collapse
How are you trying to put it into DL mode? Did you try using Odin to put it into DL mode?
zelendel said:
How are you trying to put it into DL mode? Did you try using Odin to put it into DL mode?
Click to expand...
Click to collapse
Here is the message i go before it happened if that helps
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
ANd i pressed the volume up and down button and insers the usb. I tried all the buttons then plugging in the usb cord to. Nothing works. my computer doenst even recognize it
foxxxx said:
Here is the message i go before it happened if that helps
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
ANd i pressed the volume up and down button and insers the usb. I tried all the buttons then plugging in the usb cord to. Nothing works. my computer doenst even recognize it
Click to expand...
Click to collapse
Hmm that is normal as then it reboots into recovery and then loads the update zip. Might need to look into making a jig for it
Related
I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!
Are you starting up Odin before you put the phone into download mode?
I've had Odin stop at various places before. The method that works for me is having Odin up and running, power off phone, remove battery & sim, hold vol up and down, put battery in, plug in usb.
Check this out for more suggestions, http://forum.xda-developers.com/showthread.php?t=819105
darcjrt said:
I need help PLS!!
I get to download mode but Odin wont get stock here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> factoryfs.rfs
Then the screen turns blue or purple. Cant boot into recovery because I have the 3e with no power button.
PlS THX!
Click to expand...
Click to collapse
This is normal behavior, you need to let the blue/purple screen go, it will eventually reboot and you will be fine.
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
balishared said:
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
Click to expand...
Click to collapse
i had this happen one day on my work computer when every USB device shut down for a split second during the flash....
I just had the same thing happen. I was using odin 1.3 by following this sites directions, which were the most descriptive that I could have found. I was using odin 1.3.
For the record I am using a vibrant. I was certainly nervous of unplugging my phone in the middle of a flash, which turned to a green screen, but it worked. I reran the flash process and it worked fine the second time.
Thanks for the previous post for giving me the confidence to do it.
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
i got a blackberry data cable and had no issues since. be carefull bb cable doesnt stay put BUT data rate is very fast
i had that and then had dead phone...got it replaced from ATT
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
thanku thanku...will try this. this happened yest, orange ,green, yellow screens now even 3 button not working. i even filed insurance claim. u gave me hope, will go home today, restart everythin n try.
Sorry to bump an old thread but having this issue as well.
Trying to flash back form MIUI 1.6.10.
It either does the color thing or gets stuck at factory.rfs.
EDIT: Solved by using a diff USB cable! Le fffuuuuu....
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
dohboy15 said:
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
Click to expand...
Click to collapse
Similar happened to me on an 1104 build, where did you get stuck at in Odin?
And yes mine was hard bricked, no saving she was a goner.
happened to me today
removed battery
pressed keyboard buttons to drain ALL power
with battery removed held power and 1 while plugging phone in
BAM! Download mode.
ODIN'd to victory.
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
I get this with the nice random choice of colors my screen tosses at me. is there something going on? it just sits at this for minutes on end. how long should it take before rebooting?
thanks. jom
Serena like a connection issue.
check this thread for trouble shooting tips.
Captivate
Eclair 2.1, rooted
1012 REV0.4
Ran Odin for the first time:
Opened Odin, turned phone to download mode, plugged phone in, started odin.
at that point odin didn't see any issues with my phone and ran unhindered.
upon reboot it got stuck in the now infamous world phone loop.
At first I couldn't get back into download mode => so I made a plug in jig(now getting in d/l mode is easy)
Tried to run odin again and it just ran perfectly like before and upon my phone's reboot... it goes back into the boot loop.
Did this little dance around 10x now...
my computer does not recognize the device but odin does...
Help would be appreciated seeing as how this is a common occurrence through out the forum from my observation.
kang0saur said:
Captivate
Eclair 2.1, rooted
1012 REV0.4
Ran Odin for the first time:
Opened Odin, turned phone to download mode, plugged phone in, started odin.
at that point odin didn't see any issues with my phone and ran unhindered.
upon reboot it got stuck in the now infamous world phone loop.
At first I couldn't get back into download mode => so I made a plug in jig(now getting in d/l mode is easy)
Tried to run odin again and it just ran perfectly like before and upon my phone's reboot... it goes back into the boot loop.
Did this little dance around 10x now...
my computer does not recognize the device but odin does...
Help would be appreciated seeing as how this is a common occurrence through out the forum from my observation.
Click to expand...
Click to collapse
What did you flash with odin?
sorry i should have clarified
it was I897UCJF6-final-OCD-REVO
Odin3Excecution v1.00
Windows XP - Laptop
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
Happened to me too. I suspect you have a 1010 or higher build phone.
I think you need the 2.2 (Froyo) version of Odin.
It's here http://forum.xda-developers.com/showthread.php?t=797282
Get to download, flash with that and you should be good to go.
kang0saur said:
sorry i should have clarified
it was I897UCJF6-final-OCD-REVO
Odin3Excecution v1.00
Windows XP - Laptop
here's the message script if there's anything weird:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Sbl.bin
<ID:0/008> boot.bin
<ID:0/008> cache.rfs
<ID:0/008> dbdata.rfs
<ID:0/008> factoryfs.rfs
<ID:0/008> param.lfs
<ID:0/008> zImage
<ID:0/008> modem.bin
<ID:0/008> cache.rfs
<ID:0/008> Removed!!
Click to expand...
Click to collapse
This is the leaked version of froyo. It worked for me just fine but this was back in August and I have an older phone. As mxracer said, it may be due to you having a newer phone and the version DG posted might work for you. Check and make note of your phones build number for foture reference as some things may not work on your phone. This number is located under the battery. (Four digits, starts with 10xx)
You should really check us out over at Phoenix if you want some real kick azz froyo 2.2.1
This stuff is kinda outdated.
Go here http://forum.xda-developers.com/showthread.php?t=892973
Also click the link in my signature.
mxracer101 said:
Happened to me too. I suspect you have a 1010 or higher build phone.
I think you need the 2.2 (Froyo) version of Odin.
It's here http://forum.xda-developers.com/showthread.php?t=797282
Get to download, flash with that and you should be good to go.
Click to expand...
Click to collapse
THANK YOU VERY MUCH SIR!
all I needed was a new version of Odin for the 1010+ builds
hopefully this helps other ppl out too who r stuck
I was trying to install CM7 from Apex10 and ran the bootloaders and something went wrong.. phone was completely off (nothing just blank, no key combinations worked)
I went to download mode using JIG and tried to go to stock and it kept stuck at this
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
I tried many times, it just stops at this point or later.. but never succeeds..
is this totally gone?
any solution pls?
Thanks.
Try a different usb port , check if ur running odin as admin, try different odin vs. and if it's still a no go try another calbe. It's not totally gone 'till it boots up
Its just stopping at this point:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> Sbl.bin
<ID:0/004> boot.bin
<ID:0/004> cache.rfs
<ID:0/004> factoryfs.rfs
Its almost 30min..
Any more ideas...
I had the same thing happening to my phone a lil while back. I've got pass that issue by pulling the cable and the battery, restarting odin and connecting usb to the port that worked in the past (com4 in my case).
Thanks for sticking with me.. I tried another laptop and I was able to get the stock.. Now am more confident to play with this toy..with JIG in hand
Woot +1 on the JIG
Woot for unbrickable mod
Sent from my unbrickable cappy *bam*
ohh yahh me 2!!!!
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
zacthespack said:
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
Click to expand...
Click to collapse
yes odin said it was successfull..
vijai2011 said:
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
Click to expand...
Click to collapse
yes.. where can i get such an older stock gb rom?
lol4it said:
yes odin said it was successfull..
yes.. where can i get such an older stock gb rom?
Click to expand...
Click to collapse
They in development section.Its a sticky thread.BTW if you dont bother about loosing your sd-card data and about binary counter,flash darkyrom 3.4-RE.Since it repartitions your phone,you must be fine...
i dont care about dat data... backuped everthing..
i just want my phone to work..
lol4it said:
i dont care about dat data... backuped everthing..
i just want my phone to work..
Click to expand...
Click to collapse
Ok thn better flash darkyrom_note 3.4 RE.Its in development section.But it will increase the counter and give yellow triangle for sure...
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
lol4it said:
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
Click to expand...
Click to collapse
Yeah thats the one...
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
theres written in blue RESET in odin.. what shall i do?
EDIT:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
ok finished but my screen is still black Oo
EDIT 2:
said nothing.. i love u dude and i dont care about dat triangle..