Dear All,
It's my first time converting from iPhones to Android. Happy to join this community to learn and share.
It was my first amateur experience flashing my Galaxy Note 9.
Basically, I flashed an incorrect BL file at Odin after OEM Unlock. Phone was running Android 9 and it was a N960N (Korean Model).
I downloaded the BL file from another forum that was apparently supposedly to be only flashed inside TWRP.
I was stupid enough to change that zip file into a .tar file.
After a successful flash at BL, the phone seems to be bricked. It is unable to go into recovery or download mode.
I've tried
1. (vol down + bixby + power)
2. (vol up + bixby + power)
3. (vol down + bixby)
Whenever I do this, the following message just keeps getting prompted "KERNEL REV. CHECK FAIL DEVICE:3 BINARY: 2 (BOOT)
The computer can't detect the phone anymore....
I was stupid. Please advise me. Could it be that on the hardware volume down button is faulty? I was having a hard time bringing it to download mode at the beginning. I used recovery mode to boot into download mode and then made this big mistake.
I brought it to a repair shop, they said the volume down button is working so its more likely software problem.......
Any solution?
Thank you in advance.
This is the Odin Log
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 8 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cm.bin
<ID:0/009> keystorage.bin
<ID:0/009> sboot.bin
<ID:0/009> up_param.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
<ID:0/009> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Seems like that the OS installed correctly on your device. What is the issue you are having?
For download mode , try vol down + Bixby and insert usb.
https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960N
chick this site to download the room compatible with your phone
for download mode
1. (vol down + bixby + power) and Connect the mobile phone to the charging cable at the same time
Related
My galaxy was flashed with the latest beta of Android 2.2 then I applied the root, since then my download mode stopped working and my galaxy get frozen after I turn it ON at the Galaxy S black and white screen... The only two mode that I was able to bring up is FORCED UPLOAD by KEY PRESSING and UNKNOWN MODE...
This is what I did to get the download mode and I double checked it twice that his method works before I posted here:
btw: my OS is Windows 7 and I installed the Windows 7 drivers the filename is "Windows 7&Vista x64 USB Driver.zip"
file required are the firmware that I don't have I used again Android 2.2 I don't know what firmware to put I would like to know what firmware was on the original Bell i9000M if someone can tell me it's appreciated.
The other required file is Odin3 v1.30
I did the following first I right clicked the Odin3 and UNBLOCK it and change the compatible mod to XP
Here are the STEPS:
1- disconnect the cable from the phone.
2- launch Odin3 v1.30
3- Put your phone into FORCED UPLOAD by KEY PRESSING
4- Connect the USB cable to your phone (Odin3 should display "Added!!"
5- Select your file PIT, PDA, PHONE and CSC then click on START
6- Your Odin will stop on "SetupConnection.." (if you use the older version of Odin it will stop at "File analysis.." and I don`t know if it works with the older version.
7. Now when you see the "SetupConnection.." Press Volume down + Home + Power and KEEP HOLDING IT UNTIL YOU SEE the DOWNLOAD MODE
This is the LOG of my Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.rfs
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
If you have noticed after you see "SetupConnection.." your phone will be disconnected from Odin3 then it will reconnect then BINGO you will get the download mode.
I hope this will help all ppl who are stuck at the boot screen without having access to the download mode.
Now I need a favor I dont know when to get the original firmware of bell I wanna bring back my phone to the original state.
Thanks
DeCoDish
Update: I've installed Kies the latest version I thought I can get the original firmware using Kies so I decided to bring the download mode using the above procedure then I was surprised the I could not get to the download mode again!!! Hmmm.... I uninstalled Kies then I tried again with no luck... I re-installed the driver "Windows 7&Vista x64 USB Driver.zip" then I repeated the above steps then the download mode is back.... Weird isn't??? It looks like the Kies override the driver with another driver... So in order to get my procedure working make sure you UNINSTALL completely KIES from your system and install the drivers that I mentioned... Also notice that adb.exe detects my device and it wasn't before... Now I have the Downloading mode but I don't know what to load Hope that anyone can point me where I can download the original firmware that comes with Bell i9000M model...
DeCoDish
OUTCH!!!! What is that file s1_odin_20100512.pit ???????
I loaded only this file using repartition option without selecting the PDA, MODEM and CSC the I flashed the pit file the phone rebooted then BLACK SCREEN OF DEATH the PHONE DOES NOT TURN ON!!!! Anyone knows why??
DeCoDish
I have the same problem flashed to jp3 my i9000m loosed its recovery and download mode. Work hard to get it now easily lost
Hi DeCoDish,
Thanks - you revived my device from bricked state.
You can find almost all official firmware version on www samfirmware com (sorry not allowed to post full url as I am a new user and still waits to be verified by moderator).
/Anders
How long should keep pressing that combo for download mode, cuz when I'm keep pressing it it just shows recharge screen and i realy need download mode.
DeCoDish said:
OUTCH!!!! What is that file s1_odin_20100512.pit ???????
I loaded only this file using repartition option without selecting the PDA, MODEM and CSC the I flashed the pit file the phone rebooted then BLACK SCREEN OF DEATH the PHONE DOES NOT TURN ON!!!! Anyone knows why??
DeCoDish
Click to expand...
Click to collapse
So you just randomly flashed a file to your phone, not even knowing what it is or does?
Just for the fun of it?
And you're wondering why your phone is now fked?
Do a full reflash with PIT, CSC, MODEM and PDA.
FFS...
DeCoDish said:
My galaxy was flashed with the latest beta of Android 2.2 then I applied the root, since then my download mode stopped working and my galaxy get frozen after I turn it ON at the Galaxy S black and white screen... The only two mode that I was able to bring up is FORCED UPLOAD by KEY PRESSING and UNKNOWN MODE...
This is what I did to get the download mode and I double checked it twice that his method works before I posted here:
btw: my OS is Windows 7 and I installed the Windows 7 drivers the filename is "Windows 7&Vista x64 USB Driver.zip"
file required are the firmware that I don't have I used again Android 2.2 I don't know what firmware to put I would like to know what firmware was on the original Bell i9000M if someone can tell me it's appreciated.
The other required file is Odin3 v1.30
I did the following first I right clicked the Odin3 and UNBLOCK it and change the compatible mod to XP
Here are the STEPS:
1- disconnect the cable from the phone.
2- launch Odin3 v1.30
3- Put your phone into FORCED UPLOAD by KEY PRESSING
4- Connect the USB cable to your phone (Odin3 should display "Added!!"
5- Select your file PIT, PDA, PHONE and CSC then click on START
6- Your Odin will stop on "SetupConnection.." (if you use the older version of Odin it will stop at "File analysis.." and I don`t know if it works with the older version.
7. Now when you see the "SetupConnection.." Press Volume down + Home + Power and KEEP HOLDING IT UNTIL YOU SEE the DOWNLOAD MODE
This is the LOG of my Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.rfs
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> zImage
<ID:0/005> modem.bin
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Removed!!
If you have noticed after you see "SetupConnection.." your phone will be disconnected from Odin3 then it will reconnect then BINGO you will get the download mode.
I hope this will help all ppl who are stuck at the boot screen without having access to the download mode.
Now I need a favor I dont know when to get the original firmware of bell I wanna bring back my phone to the original state.
Thanks
DeCoDish
Update: I've installed Kies the latest version I thought I can get the original firmware using Kies so I decided to bring the download mode using the above procedure then I was surprised the I could not get to the download mode again!!! Hmmm.... I uninstalled Kies then I tried again with no luck... I re-installed the driver "Windows 7&Vista x64 USB Driver.zip" then I repeated the above steps then the download mode is back.... Weird isn't??? It looks like the Kies override the driver with another driver... So in order to get my procedure working make sure you UNINSTALL completely KIES from your system and install the drivers that I mentioned... Also notice that adb.exe detects my device and it wasn't before... Now I have the Downloading mode but I don't know what to load Hope that anyone can point me where I can download the original firmware that comes with Bell i9000M model...
DeCoDish
Click to expand...
Click to collapse
I did everything step by step...
but now my phone doesn't even starts, it's like it died litterally...
any ideas...???
ANYONE...?????
xero2002 said:
So you just randomly flashed a file to your phone, not even knowing what it is or does?
Just for the fun of it?
And you're wondering why your phone is now fked?
Do a full reflash with PIT, CSC, MODEM and PDA.
FFS...
Click to expand...
Click to collapse
how do we do this since the phone does not even starts...
not even with the key combination...
SOLVED
You need to hold the power, vol down and home key down and then put the battery in.
"5- Select your file PIT, PDA, PHONE and CSC then click on START"
Where can i get these files? I got my phone into this state through some ****ty app, i dont need to be told how dumb i am, if you can help this is greatly appreciated.
Can anyone please share the file Windows 7&Vista x64 USB Driver.zip ?
Thanks
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
balishared said:
i put my phone into download mode, odin one-click was open already, press start then:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
and a green screen on my phone
whats next?
i google :"odin green screen android" noting came up
10:42am update:
i close odin, unplug usb, remove battery. open odin, restart download mode (ye!!!!) :
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
<ID:0/009> boot.bin
<ID:0/009> cache.rfs
<ID:0/009> dbdata.rfs
<ID:0/009> factoryfs.rfs
<ID:0/009> param.lfs
<ID:0/009> zImage
<ID:0/009> modem.bin
<ID:0/009> cache.rfs
<ID:0/009> Removed!!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
back to stock !!!!!
Click to expand...
Click to collapse
i had this happen one day on my work computer when every USB device shut down for a split second during the flash....
I just had the same thing happen. I was using odin 1.3 by following this sites directions, which were the most descriptive that I could have found. I was using odin 1.3.
For the record I am using a vibrant. I was certainly nervous of unplugging my phone in the middle of a flash, which turned to a green screen, but it worked. I reran the flash process and it worked fine the second time.
Thanks for the previous post for giving me the confidence to do it.
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
i got a blackberry data cable and had no issues since. be carefull bb cable doesnt stay put BUT data rate is very fast
i had that and then had dead phone...got it replaced from ATT
oxlong27 said:
that happened to me as well I kept trying and trying I was fetting green screens blue pink purple orange etc I then tried plugging my cable in a different usb port on my cpu and it worked first try and has never failed me since. Not sure why it worked but give that a try
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
thanku thanku...will try this. this happened yest, orange ,green, yellow screens now even 3 button not working. i even filed insurance claim. u gave me hope, will go home today, restart everythin n try.
Sorry to bump an old thread but having this issue as well.
Trying to flash back form MIUI 1.6.10.
It either does the color thing or gets stuck at factory.rfs.
EDIT: Solved by using a diff USB cable! Le fffuuuuu....
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
dohboy15 said:
i got a purple screen during an odin flash for about 15 minutes, so i unplugged, now nothing happens. no download mode, homemade jig doesn't work, vol+ vol- doesn't work, does this mean its hard bricked?
Click to expand...
Click to collapse
Similar happened to me on an 1104 build, where did you get stuck at in Odin?
And yes mine was hard bricked, no saving she was a goner.
happened to me today
removed battery
pressed keyboard buttons to drain ALL power
with battery removed held power and 1 while plugging phone in
BAM! Download mode.
ODIN'd to victory.
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
I get this with the nice random choice of colors my screen tosses at me. is there something going on? it just sits at this for minutes on end. how long should it take before rebooting?
thanks. jom
Serena like a connection issue.
check this thread for trouble shooting tips.
First of all I'm a beginner in android world .
Kernal: 2.6.32.9
[email protected] #1
The problem is:
I was trying to root my Galaxy S I9000 following the steps of [GUIDE] And then there was ROOT !
Everything was great until this step:
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
Odin gave me a red flag with " Failed " and I got this message:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> zImage
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I unpulged my device and turned it off, when I turned it on a device-!- computer screen appered, after many tries I took off the battery and put it then I pressed the three combo button, finally I managed to get to download mode.
Now:
-My computer recognizes the device but Kies doesn't ( although it's the latest version and I tried to reinstall the drivers.)
-Odin keeps giving me the same error, and sometimes it stay stop at <ID:0/009> SetupConnection.. ( I tried XWKDD_insecure.tar & KE2_original.zip )
-I'm stuck in download mode.
Please help me get my phone to work (I prefer to return to the same firmware if it's possible).
https://www.wuala.com/Samsung Galax...and Odin/Original Firmwares/?key=AfzUZSU4SpKU
Download your original firmware from here and flash it in odin.
E: Btw are you using latest odin?
I got same problem when i m newb so calm down first go to www.samfirware.com and select ur phone download latest europen rom it is JVR and then flash them via odin by putting file respectively
Sent from my GT-I9000 using XDA App
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it ( i.imgsafe.org/ce3bada933 .jpg) remove space before .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
..
Got the same problem after latest update of my note 5 SM-N9208 from Philippines.
yogiexp said:
blue screen error with chinese text i.imgsafe.org/ce3bada933 .jpg
guide i used stechguide.com/install-twrp-recovery-on-samsung-galaxy-note-5
Click to expand...
Click to collapse
Tried it but doesn't work.
yogiexp said:
HI friends
I have note 5 duos SM-9208 brought in Taiwan, Its completely official with latest updates running on 6.1 marshmallow
I want to have just TWRP recovery on my phone no rooting for now, as i want to have my official stock rom backup as soon as i get twrp on my phone, later i can go for rooting
did oem unlock, usb debug on , connected on download mode and tried to flash twrp file (twrp-3.0.2-1-nobleltezt.img.tar)
the box turned green but no pass and then i get blue screen with white exclamation mark screen and chinese text on it
nothing happens in ODIN too it says RQT close!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> recovery.img
<ID:0/010> RQT_CLOSE !!
I don't understand whats happening with that blue screen as everything is in chinese,
it didnt work as explained in that link, please help me guys any guys from taiwan if they can explain what it says and how to install twrp successfully here
thanks
Click to expand...
Click to collapse
Just found a way to get TWRP back on my note 5.
I flashed with odin the Chainfire autoroot Auto-Root-noblelte-nobleltextc-smn9208.tar.md5
Your phone will get stuck on boot screen and it will say in left upper corner "seandroid not enforcing".
Push volume down + home + on/off, to get back in download mode.
Flash with odin the TWRP file.
Now you will have working TWRP (i rooted my phone directly)
It worked for me, let me know if it worked for you.
Regards,
Pr4d0
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
dhonzik said:
Did you run the CROM Service app to unlock the bootloader? You will not be able to flash anything until you unlock the bootloader. My girlfriend has the same phone and you are in luck that I still have the CROM Service app, you can download load it from here
https://1drv.ms/u/s!AumjSD0UEAABgpkxvUZZgxs0UAum5g
Click to expand...
Click to collapse
thanks i think its the issue with crom unlock, but i see warning everywhere it will knockout knox! i was trying to have twrp without rooting or disable knox, but i guess i dont have choice with my model.
Hi there. I have a Galaxy A6 with broken screen. I don't know if touchscreen works, but all I see is a permanently white screen.
All I want is to recover my files from in there, but obviously all I see on PC is an empty device because the phone is not unlocked. I stupidly didn't set a Samsung account in the device, so unlocking it with find my device is not an option. There's no USB debugging or OEM unlocking done either. Here's what I already tried:
1. Rebooting in recovery mode and trying to get into ADB: nope, stock recovery ROM apparently doesn't allow that.
2. Rebooting in download mode and flashing TWRP with Odin to get a recovery with adb and disk mounting enabled: Odin sees the device and start flashing, but then fails. This is the output:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 25 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3. Trying to flash stuff with adb and fastboot while in download mode: adb and fastboot don't see the device at all in any mode (tried normal boot, recovery and download). In windows device manager, the device is seen, in download mode, as "Samsung Mobile USB Modem". Yes, I have installed the Samsung drivers.
Does anyone have a clue about what can I do? Thanks for the help!