I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the help, but somehow it dont boot into stock recovery
and now it has bootloops for trying many things and dont work for me.
Bad thing i not good on commands and dont know how to flash it that way.
datfat said:
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
Click to expand...
Click to collapse
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
chipis said:
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
Click to expand...
Click to collapse
Well I have some possibly bad news for you....
Unfortunately most that have tried to do a Factory Reset from within Android end up with their Streak 7 in what is called Read Only mode for which the only fix is sending it to Dell.
To boot recovery you have to hold BOTH the Volume + and Power buttons at the same time until its in recovery.
From stock recovery you then choose factory reset. I would recommend you do nothing more than that until you learn fastboot and adb commands. Like I told you earlier, you have a lot of reading to do
Sent from my cm_tenderloin using Tapatalk 2
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
chipis said:
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
Click to expand...
Click to collapse
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
giveen said:
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
Click to expand...
Click to collapse
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
You have to hold the buttons until it actually boots into recovery
Sent from my cm_tenderloin using Tapatalk 2
chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
giveen said:
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
Click to expand...
Click to collapse
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
chipis said:
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
Click to expand...
Click to collapse
ok how do i installed recovery. I follow the step but iam kind of noob on this.?
Related
<!-- MODS! Please sticky this! -->
Devs:
We need a concise guide on how to to this. I believe that we would all benefit from such a guide (less in-the-dark-n00bs messing up and more time for devs to dev and not have to answer questions.)
I know there are devs out there with VASTLY more experience then us middle of the road devs, and we would like to share in this knowledge.
DJ-Steve and the other noted devs: this is an open invitation to you. I'll modify/delete this post to include your (generous) contributions if you'd only take the time to make them.
-One user on this forum noted the DS7 sub is sort of shabby; let's work to change that so that we can all start doing what we love to - rip ROMs to bits and build 'em to out liking in true open-source fassion!
Flash CWM via ADB fastboot then flash the rom through CWM on the device itself, it isnt all that hard to do... Then again I guess the lack of basic knowledge has something to do with how often people stuff up the most basic of tasks
Nocturnal_50 said:
Flash CWM via ADB fastboot then flash the rom through CWM on the device itself, it isnt all that hard to do... Then again I guess the lack of basic knowledge has something to do with how often people stuff up the most basic of tasks
Click to expand...
Click to collapse
Man iam having trouble flashing a recovery mode, how did you do it?
chipis said:
Man iam having trouble flashing a recovery mode, how did you do it?
Click to expand...
Click to collapse
see post 2 of this guide
Honestly it isnt all that hard to root the device
Nocturnal_50 said:
see post 2 of this guide
Honestly it isnt all that hard to root the device
Click to expand...
Click to collapse
well bro,
now it reboots every time i want to go recovery mode and then bootloops. Some how it saids that flashes successfully using fastboot but when i press VOL + and POWER at the same time it reboot... i have to let it go when the DELL logo flashes or when the buttons?
chipis said:
well bro,
now it reboots every time i want to go recovery mode and then bootloops. Some how it saids that flashes successfully using fastboot but when i press VOL + and POWER at the same time it reboot... i have to let it go when the DELL logo flashes or when the buttons?
Click to expand...
Click to collapse
You have to continue to hold the buttons in after the buttons light up till the menu appears on the screen a few seconds later.
wptski said:
You have to continue to hold the buttons in after the buttons light up till the menu appears on the screen a few seconds later.
Click to expand...
Click to collapse
Man i did it so many times that my danm thumb finger hurts.
It did flashes the image recovery over fastboot and it saids secessfully
flashed.
Bro, I did every thing on the steps.
What i think is that may be the buttons switch or something because it does not go to recovery as the steps saids.
It possible to flash a ROM over fastboot using commands prompt and how?
Iam asking because it reboots the tablet every 10 seconds, i switch to safemode and it would not reboots.
chipis said:
Man i did it so many times that my danm thumb finger hurts.
It did flashes the image recovery over fastboot and it saids secessfully
flashed.
Bro, I did every thing on the steps.
What i think is that may be the buttons switch or something because it does not go to recovery as the steps saids.
It possible to flash a ROM over fastboot using commands prompt and how?
Iam asking because it reboots the tablet every 10 seconds, i switch to safemode and it would not reboots.
Click to expand...
Click to collapse
Not sure what you mean by "safemode".
I'm not sure how or where the different modes that use the buttons are or how they are loaded. Meaning are they protected memory areas that normally don't get written over or what?
Can you enter NVflash mode? Can only suggest starting there with a ROM of your choice.
wptski said:
Not sure what you mean by "safemode".
I'm not sure how or where the different modes that use the buttons are or how they are loaded. Meaning are they protected memory areas that normally don't get written over or what?
Can you enter NVflash mode? Can only suggest starting there with a ROM of your choice.
Click to expand...
Click to collapse
Man i need a serious help.
Safe mode comes when i press VOL - and power.
But limited on apps ( i can not used all the apps int the tablet )
how do i enters NVflash?
Can i installad any rom or recovery using NVflash mode, even if i dont have stock or custom recovery?
chipis said:
Man i need a serious help.
Safe mode comes when i press VOL - and power.
But limited on apps ( i can not used all the apps int the tablet )
how do i enters NVflash?
Can i installad any rom or recovery using NVflash mode, even if i dont have stock or custom recovery?
Click to expand...
Click to collapse
That is normally refered to as the Fastboot mode.
To enter NVflash you depress both Vol - and Vol + and plug into your PC. You should hear a beep and APX device will appear in your device manager.
Not all ROM are installed using NVflash mode but the first build uses NVflash and thereafter CWM is used to install newer versions. Most if not all NVflash come with a recovery mode some with CWM and even rooted as well with Superuser7.
Take a look at these videos by user "giveen" for help: http://www.youtube.com/playlist?list=PLB99FAE280F618B12
This may help also: http://forum.xda-developers.com/wiki/Dell_Streak_7#Official
Hi so I have cm7 7.0.2 on my nexus one. Today it froze on the unlock screen, as it has a few times before since I put cm7 on my phone, so I did a battery pull, and then it wouldn't turn on. I plugged it into my charger, and now it turns on, but just goes to the colored X screen, and then reboots in a loop, over and over again.
Any suggestions?
Thanks a lot!
Use something like RUU to go back to stock then root your phone and if you have a backup on your recovery select that once you are done setting it back to stock.
Sent from my SCH-I500 using XDA Premium App
Did you do OEM UNLOCK? if you didyou can simply boot into the bootloader and then choose recovery and from there you can re flash your rom
this is exactly what happen to my phone. say good bye to our nexus one my friend, i don't think we can fix it. it's been a week.
rheza02 said:
this is exactly what happen to my phone. say good bye to our nexus one my friend, i don't think we can fix it. it's been a week.
Click to expand...
Click to collapse
I wouldn't bet on it, if it's simply in a boot loop then it's perfectly fixable. Go into the bootloader by holding the volume button while turning on the phone. Navigate to the recovery option using the volume buttons and confirm using the power button. From here you can wipe/restore nandroid/flash CM7 again. Also, you don't need to unlock the bootloader to do any of this.
Hollow.Droid said:
I wouldn't bet on it, if it's simply in a boot loop then it's perfectly fixable. Go into the bootloader by holding the volume button while turning on the phone. Navigate to the recovery option using the volume buttons and confirm using the power button. From here you can wipe/restore nandroid/flash CM7 again. Also, you don't need to unlock the bootloader to do any of this.
Click to expand...
Click to collapse
thanks, but that's what i do, when i can't boot. it's stuck on x when i try boot to recovery, and flash boot, recovery, system, not changed the situation.
ok, i am not an expert, but just brainstorming here based on what i understood while flashing mine..
download a recovery image to your PC
get into bootloader mode on the nexus, connect it to ur pc, select the fastboot usb option on ur fone
open windows console
type:
fastboot flash recovery <image file path> and press enter.
fastboot can be located inside android-sdk. so make sure you have your present working directory set to the path of "fastboot.exe"(e.g. c:\android\android-sdk\tools)
rheza02 said:
thanks, but that's what i do, when i can't boot. it's stuck on x when i try boot to recovery, and flash boot, recovery, system, not changed the situation.
Click to expand...
Click to collapse
You will either have to run PASSIMG.zip (The forums have good guides on this) or unlock your bootloader and flash the individual .img files through bootloader/fastboot.
Hollow.Droid said:
You will either have to run PASSIMG.zip (The forums have good guides on this) or unlock your bootloader and flash the individual .img files through bootloader/fastboot.
Click to expand...
Click to collapse
it didn't changed the situation, it just stuck on X or reboot loop.
rheza02 said:
it didn't changed the situation, it just stuck on X or reboot loop.
Click to expand...
Click to collapse
Did you try he fastboot erase commands first? I'm not at my computer to write a quick guide but if you still need it in a few hours ill write it up. If it still gets stuck in a bootloop after that then your device is probably bricked
Hollow.Droid said:
Did you try he fastboot erase commands first? I'm not at my computer to write a quick guide but if you still need it in a few hours ill write it up. If it still gets stuck in a bootloop after that then your device is probably bricked
Click to expand...
Click to collapse
yeah man, i already do all of that, and it still in a boot loop.
thanks for your help.
nexus one not rebooting after the battery drained
I am currently in the same situation. In my case the battery drained completely. I removed the battery and disconnected the charger. In the past this worked. Now what I get is the colorful X.
What I can do:
Fastboot via power and the "pearl"
Go into the boot menu via volume down and power
No matter what I chose after that I get to the same X. While this seemed promising none of the following worked:
reflashing recovery
Reflashing back to stock of radio/recovery/system/boot/
replacing battery
Any other thoughts?
Before wipe all your data on your phone in the recovery and reinstall passimg.zip
Sent from my Nexus One using XDA App
Hello there,
a few days ago i got a lot of problems with my wifi connections, and in a german forum they told me to check if a custom rom could work for me. So i installed the "Minimal ADB and Fastboot" tools to install the cwm and so on. After i flashed the recovery.img, my tablet restarted and now i am stucked in a boot loop.
The big problem is, I am not able to reach the menu for RCK and so on again with VOL- and Power Button. Just restarting and restarting and restarting... i can not connect via adb or fastboot. The only thing i can do is VOL+ and Power, Windows 8 then gives a signal of a connection, but i don't know what to do with this - cause I only have a black screen!
I hope, somebody is able to help me, to solve this issue.
Thanks and Regards
(sry for my bad english)
What version of stock Rom was it on the tablet when you flashed cwm and which version cwm did you flash
We recommended the latest Asus firmware and the latest working recovery is 6.0.4.7
Sent from my Note II using XDA Premium 4 mobile app
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
I also had a bootloop before, I think I hold both volume and power to power down. Then wait 5 minutes then vol - and power to get into fastboot
Sent from my Note II using XDA Premium 4 mobile app
Hey! My version was the official 4.3 Update WW_10_26_1_18.
I wanted to install the Asus Stock Modded Deodexd Rom (10.26.1.18 JB 4.3) for root.
After I used this tutorial droidbasement.com/db-blog/?p=3223 for installing cwm, my device started to begin his loop. I am not able to Use Vol- / power! I also waited for several minutes
What happens if you just keep holding vol- and power without releasing
Sent from my Note II using XDA Premium 4 mobile app
All you have to do is power and vol +/- then flash back the stock recovery via fastboot.
Then wipe. Then boot in as normal (you will have to re-set up). If wipe does not restore you, grab 10.26.1.18 for your SKU from asus , rename the .zip inside to T4_SDUPATE, place on an microsd, pop it in, enter boot loader and enter RCK. Then it will flash it.
You should fastboot boot to ensure you are ok before permanent flashing, when putting a new recovery on.
Your bootloader must be on 10.26.1.18 to use anything on DB.
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
You have to be fast. When.the screen goes black hold vol +/- (hold them both) and it will enter fastboot when it cycles since I doubt u can fully power off in that state. Leave USB plugged in.
also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?
pershoot said:
also, reply back with how exactly you flashed recovery (the command). did you do a fastboot flash recovery recovery.img or a fastboot flash boot recovery.img?
Click to expand...
Click to collapse
that's a good question. I mean, i did exactly what is written in that post from droidbasement.
Then you should have no issue as long as you are on the appropriate boot loader. Hundreds if not thousands of users are using it at this point.
Power and hitting both vol + and - at same time should get it back in to fastboot. Please make sure you time it right.
Good luck.
Zkaface said:
The Problem is, i have no fastboot connection anymore! The loop is going and going, vol- / pow does not work! It is still looping the asus logo and that's it!
Click to expand...
Click to collapse
Hey Zkaface,
Did you manage to solve your problem or you still have a bootloop with asus logo? I have the similar problem, no fastboot available yet. Also, no any buttons combination. as -&+ & power. helping..
Pls reply if you have any idea / related news how to fix it.
Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((
Dggo said:
Hello!
I have the same problem. After installing recovery.
When the screen is off transformer is in APX mode.
But as I understand for Tegra 4 still does not work. (((
Click to expand...
Click to collapse
Correct. There is no wheelie/nvflash/bricksafe for this tablet.
You need to provide more information how you got into this situation.
Can you boot into fastboot?
berndblb said:
Can you boot into fastboot?
Click to expand...
Click to collapse
No, tried everything (vol-&power...).
berndblb said:
You need to provide more information how you got into this situation.
Click to expand...
Click to collapse
Did unlock, flashed recovery (accordance with the instructions 4pda.ru)
After reboot got android belly up.
And after the second reboot got endless bootloop(((
Exit from it turns out only by pressing vol+
I apologize for Google translator
Asus help is needed
Hello ASUS !!!
You have to HELP us, in order to keep your consumer with you. Other vice people will start to think that your ASUS brand is not a trustful brand anymore. Using such tricks as providing consumer with possibility to open a "Pandora's box" with bootloader unlock, and after you pushing consumer to pay about 300 $ for "motherboard replacing".
Following such kind of policy you will collect some money but definitely you will loose much more.
Sincerely,
Stream1313
PS: I was started to use the "unlock" etc not because I do not have other business t do but because of the serious problem in your DEFAULT STOCK software.
To: Moderator - please do not delete this post, hopefully some ASUS people will read it.
I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).
krosettli said:
I have the same problem after trying to install OTA from SDcard and then erasing data from power+(vol-)-menu. It's looping all the time and I've tried everything. Only APX works if I use naked drivers (transformer APX-drivers).
Click to expand...
Click to collapse
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.
berndblb said:
You cannot get into fastboot?
How about ADB while it is looping?
You will have to provide more info: What do you have installed?
Bootloader version
ROM
Recovery
What exactly did you do?
APX is useless at this point as there is no way use nvflash on the Tegra4 yet.
Click to expand...
Click to collapse
no, no chance to get into fastboot or using adb. the only thing that works is APX after pressing volume+ for about 10sec.
what did I do: I tried to install clockworkmod recovery and flashed recovery.img from fastboot. Then I restarted my device. I was sure I did every OTA-update because I checked almost every day for new updates. BUT starting up the tablet I saw my bootloader wasn't 10.26.1.18 (required for CWM). So I went to ASUS-website and downloaded WW_epaduser_10_26_1_18_UpdateLauncher and tried to update. But this did not work. So I rebooted pressing power and volume- ... then wiped data or whatever the third option was ... after that my looping started.
I've copied T4_SDUPDATE to my microSD and tried almost everything... charging, apx and looping is the only things that work at this moment
Sorry mate, but you hardbricked your tablet.
You installed a recovery that is incompatible with your bootloader, which is not good but fixable.
Then you used 'Wipe Data' from the bootloader which is pretty much a recipe for disaster with an incompatible recovery installed.
With no fastboot or adb access there is no way to get it back.
[emoji24]
so nothing I could do over APX, microSD and the 3 buttons? no chance, even in future?
Hi there i am relatively new to android modding and rooting etc. I recently tried to install Cyanogenmod to my phone and I succeeded, but the next day my phone began to restart itself, turns out that the power button is broken. We tried to repair it but ended up burning down the processors internal i/o (latch or whatever structure it has) with a faulty multimeter . Now i have to turn on my phone with a dock cable (with 1kohm res) which wakes up the phone, i can access the Download mode by plugging in the dock, and pressing home+down, but the recovery needs the power button signal too.
I can access the recovery by using adb commands, but i need to boot in. If i install a new recovery like CWM, i am stuck in a bootloop and i don't know if i can use the adb commands. Is there any other way to get into recovery mode, besides home+power+up, or adb commands?
Can i install CM onto the phone under these circumstances?
Thanks for any help given!
Not sure how you are going to select options in recovery as you need the power button unless you have Touch Recovery or TWRP recovery. Anyway use this app to boot to recovery http://forum.xda-developers.com/showthread.php?t=1423071
pryerlee said:
Not sure how you are going to select options in recovery as you need the power button unless you have Touch Recovery or TWRP recovery.
Click to expand...
Click to collapse
Well , the home button does the trick, i think i tried it on the stock recovery mode.
Anyway use this app to boot to recovery http://forum.xda-developers.com/showthread.php?t=1423071
Click to expand...
Click to collapse
With the adb commands i can do that... but if i get into a bootloop i cant use this app, can i?
Sorry i miss understood you, so you are in a recovery bootloop?
pryerlee said:
Sorry i miss understood you, so you are in a recovery bootloop?
Click to expand...
Click to collapse
Well if i install a new recovery mod like clockworkmod then i'll be in one. That is why it is necessary to reboot in it so i can install the ROM.
Rather get your power button replaced.
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
nemesis101x said:
After downloading CM11 and GApps, I put it in my SD card and went into my recovery cwm9 by using an app. I got in and tried to flash my zips but I couldn't find them. Before I actually tried to flash them I did this first:
Wipe cache ( only required on first installation )
Wipe Dalcik cache ( only required on first installation )
Format /system and optionally /data ( Only necessary if coming from stock or a different ROM )
So when I rebooted I was greeted by getting stuck at the T-mobile boot splash.
I don't know how to get into recovery manually. I can't try to use download mode because I used fastboot. When I get into fastboot I tried using ADB to boot into recovery but device is not found when I'm in fastboot.
Please help me, I literally just got this phone and wanted to flash a custom rom because the LG stock is disgusting.
Click to expand...
Click to collapse
See FAQ thread for getting into recovery.
[SIZE=+1]Q14: I've flashed a custom recovery but what are the key combos to get there?[/SIZE]
Power off the device
Press and hold Power + Volume down
When the LG logo appears on the screen, quickly release the Power button, still holding the Volume down button, and press and hold Power again until the "Factory Reset" screen appears. Don't worry, this won't reset the device.
Use the volume keys to navigate up and down and Power to select. Scroll down and select "Yes" and repeat once more. It may take up to 10 seconds for the device to boot to recovery.
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
nemesis101x said:
I've now gotten into the recovery and installed both cyanogenmod and GApps. I've actually had to change the rom found here:
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-11-lg-l90-lg-d415-t2871371
I've had to change the updater script that contained "w7" to "w7ds" because it said my device wasn't w7 and that it was w7ds.
I've rebooted and now it's just stuck on the cyanogenmod boot screen.
What do?
Click to expand...
Click to collapse
You've got an older recovery it seems. Download Philz-Touch from my thread, the link you posted, or get TWRP from this thread
Since you're having booting issues, use fastboot to flash the recovery.
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Edit: I formatted everything again and tried to reinstall the cyanogenmod and GApps. Seems like I just had to wait for the boot screen.
nemesis101x said:
Thing is when I'm in fastboot, ADB won't detect my device. I've only gotten it to detect my device once and that's when I was unlocking my bootloader. I don't know how to do it again.
So what do I do? BTW, thanks for helping me.
Click to expand...
Click to collapse
Put device in fastboot mode. ADB can't detect the device when it's in fastboot mode.
Type:
Code:
fastboot devices
You should see a listing similar to "adb devices" output.
Copy recovery image to the same folder fastboot is in. Then type:
Code:
fastboot flash recovery recovery.img
or
Code:
fastboot boot recovery.img
First one will only write the recovery image to the device. The second on will write the image to the device and should then boot the device to the recovery.
EDIT:
Yes, the first boot takes a couple minutes.
Seems I just had to wait for bootscreen.
How do I turn data on and off?
nemesis101x said:
Seems I just had to wait for bootscreen.
How do I turn data on and off?
Click to expand...
Click to collapse
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
There are several ways. I'm guessing you're new to CyanogenMod ROMs?
shinobisoft said:
easiest way to explain. Go to Settings and toggle Mobile Networks off/on.
Click to expand...
Click to collapse
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
nemesis101x said:
Well, yeah, but a faster way. Like in LG in the notification bar there was a button that would turn data on and off. Does cyanogenmod have anything like that similarly?
Click to expand...
Click to collapse
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
shinobisoft said:
Quick Tiles. Pull down statusbar and press upper right corner image. There should be a tile already there for data
Sent from my LG-D415 using Tapatalk
Click to expand...
Click to collapse
Yeah, I got it.
Thank you for all your help!