Database Develop

Nexus one froze, so I pulled battery.. now its broken.

Hi so I have cm7 7.0.2 on my nexus one. Today it froze on the unlock screen, as it has a few times before since I put cm7 on my phone, so I did a battery pull, and then it wouldn't turn on. I plugged it into my charger, and now it turns on, but just goes to the colored X screen, and then reboots in a loop, over and over again.
Any suggestions?
Thanks a lot!

Use something like RUU to go back to stock then root your phone and if you have a backup on your recovery select that once you are done setting it back to stock.
Sent from my SCH-I500 using XDA Premium App

Did you do OEM UNLOCK? if you didyou can simply boot into the bootloader and then choose recovery and from there you can re flash your rom

this is exactly what happen to my phone. say good bye to our nexus one my friend, i don't think we can fix it. it's been a week.

rheza02 said:
this is exactly what happen to my phone. say good bye to our nexus one my friend, i don't think we can fix it. it's been a week.
Click to expand...
Click to collapse
I wouldn't bet on it, if it's simply in a boot loop then it's perfectly fixable. Go into the bootloader by holding the volume button while turning on the phone. Navigate to the recovery option using the volume buttons and confirm using the power button. From here you can wipe/restore nandroid/flash CM7 again. Also, you don't need to unlock the bootloader to do any of this.

Hollow.Droid said:
I wouldn't bet on it, if it's simply in a boot loop then it's perfectly fixable. Go into the bootloader by holding the volume button while turning on the phone. Navigate to the recovery option using the volume buttons and confirm using the power button. From here you can wipe/restore nandroid/flash CM7 again. Also, you don't need to unlock the bootloader to do any of this.
Click to expand...
Click to collapse
thanks, but that's what i do, when i can't boot. it's stuck on x when i try boot to recovery, and flash boot, recovery, system, not changed the situation.

ok, i am not an expert, but just brainstorming here based on what i understood while flashing mine..
download a recovery image to your PC
get into bootloader mode on the nexus, connect it to ur pc, select the fastboot usb option on ur fone
open windows console
type:
fastboot flash recovery <image file path> and press enter.
fastboot can be located inside android-sdk. so make sure you have your present working directory set to the path of "fastboot.exe"(e.g. c:\android\android-sdk\tools)

rheza02 said:
thanks, but that's what i do, when i can't boot. it's stuck on x when i try boot to recovery, and flash boot, recovery, system, not changed the situation.
Click to expand...
Click to collapse
You will either have to run PASSIMG.zip (The forums have good guides on this) or unlock your bootloader and flash the individual .img files through bootloader/fastboot.

Hollow.Droid said:
You will either have to run PASSIMG.zip (The forums have good guides on this) or unlock your bootloader and flash the individual .img files through bootloader/fastboot.
Click to expand...
Click to collapse
it didn't changed the situation, it just stuck on X or reboot loop.

rheza02 said:
it didn't changed the situation, it just stuck on X or reboot loop.
Click to expand...
Click to collapse
Did you try he fastboot erase commands first? I'm not at my computer to write a quick guide but if you still need it in a few hours ill write it up. If it still gets stuck in a bootloop after that then your device is probably bricked

Hollow.Droid said:
Did you try he fastboot erase commands first? I'm not at my computer to write a quick guide but if you still need it in a few hours ill write it up. If it still gets stuck in a bootloop after that then your device is probably bricked
Click to expand...
Click to collapse
yeah man, i already do all of that, and it still in a boot loop.
thanks for your help.

nexus one not rebooting after the battery drained
I am currently in the same situation. In my case the battery drained completely. I removed the battery and disconnected the charger. In the past this worked. Now what I get is the colorful X.
What I can do:
Fastboot via power and the "pearl"
Go into the boot menu via volume down and power
No matter what I chose after that I get to the same X. While this seemed promising none of the following worked:
reflashing recovery
Reflashing back to stock of radio/recovery/system/boot/
replacing battery
Any other thoughts?

Before wipe all your data on your phone in the recovery and reinstall passimg.zip
Sent from my Nexus One using XDA App

Need help installing Recovery Missing on Dell Streak 7

I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.

chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.

chipis said:
I looked everywhere and tried everything but i have not find the solution.
I bought this Dell Streak 7" at the Discount Wed site used.
And it already had the Rom manager Pre Installed, Superuser, ect.
The Weird thing is that i tried to flash a recovery within the Rom Manager and when i wanted to Boot onto recovery theres was none.
I need some one please that had the same issue like me to help to this process of flashing a recovery.
Click to expand...
Click to collapse
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2

cdzo72 said:
Wish you would do a search here in the forum
If you did then you'd find a custom Clockwork Mod for your Streak but you're gonna have to not be lazy and learn to flash it with fastboot commands
And.even then you can't boot directly into Clockwork Mod. You have to go through stock recovery first
You have some reading to do
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Well thanks for the help, but somehow it dont boot into stock recovery
and now it has bootloops for trying many things and dont work for me.
Bad thing i not good on commands and dont know how to flash it that way.

datfat said:
Rom manager cannot boot your device into recovery( at least not for me)
you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery.
I would suggest that you start over completely which will wipe the whole system. And use a rooted stock or custom rom from this forum. There is substantial amount of information on doing this in this forum and you will have to read, research before doing anything.
You can achieve this by reading the second post in general forum and skip to post 10.
Click to expand...
Click to collapse
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?

chipis said:
Thanks Your Help Is very appreciated, I just did that and dont do nothing just reboots normally. No Stock Recovery. OR iam dong it wrong
I press Vol + and then power and goes through the dell light color ect.
Well through all the normal reboot
Here another thing that i cant used the devised because now it has bootloops, I tried SaveMode and the device runs great that way, but when i go to settings to Factory restore it reboots but then again with the bootloops.
So in another words i have to flash a recovery and another Rom or theres another easy way besides Commands?
Click to expand...
Click to collapse
Well I have some possibly bad news for you....
Unfortunately most that have tried to do a Factory Reset from within Android end up with their Streak 7 in what is called Read Only mode for which the only fix is sending it to Dell.
To boot recovery you have to hold BOTH the Volume + and Power buttons at the same time until its in recovery.
From stock recovery you then choose factory reset. I would recommend you do nothing more than that until you learn fastboot and adb commands. Like I told you earlier, you have a lot of reading to do
Sent from my cm_tenderloin using Tapatalk 2

Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.

chipis said:
Ok Finally, at least got to Flash A Recovery but When i go press Vol + and power at the same time it does not go thru the recovery mode.
I have to flash a stock recovery ? If so can some one provide me the link that great.
I tried the APX fastboot and the Tablet recognize the command thru command promt.
Click to expand...
Click to collapse
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.

giveen said:
First, APX and Fastboot are two completely separate systems.
Second, Press Volume+ and Power, then chose the section option there that says "Install a package" that should take you into recovery.
Click to expand...
Click to collapse
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.

chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
You have to hold the buttons until it actually boots into recovery
Sent from my cm_tenderloin using Tapatalk 2

chipis said:
Ok this what i did, I installed the drivers. and ones it installed i looked at the Device Manager and it saids ADB Thats when the Tablet its on Fastboot ( Where the Red letters and white )
Then I went to the Command Manager and This Type in "fastboot flash recovery NAME-OF-RECOVERY-IMAGE.img
And The Command Promt actually Flashes Sucessfully.
Something its wrong, or i not pressing the right buttons to getting to Recovery.
Vol + and power then The Dell Logo flashes follow by the Dell Animation With Kind Blue Flash But it goes straight to normal reboot.
Click to expand...
Click to collapse
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"

giveen said:
For fastboot , press and HOLD (Volume Down) and (Power), press and hold till its at a black screen with red text.
Then in device manager install the Dell Streak 7 Bootloader (we call them fastboot) drivers.
Command will NOT flash, and be done
It will say something like this
"reading recovery.....OKAY
writing recovery.....OKAY
completed in xxxx seconds"
Click to expand...
Click to collapse
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?

chipis said:
ok Thats exactly what i have on my computer.
So what the best way, because i cant boot into recovery mode it goes straight to the normal boot, some how its not installed the recovery mode i guess.?
Click to expand...
Click to collapse
ok how do i installed recovery. I follow the step but iam kind of noob on this.?

Stuck after data factory reset.

I'm running streak droid honeycomb. I did a factory data reset through the settings menu and the device reboooted, appeared to be resetting but no I'm stuck on a screen with the android character and a triangle with a red exclamation.
I rooted and installed this so long ago that I'm lost. I mostly mess around with my phone. Any help is appreciated. Thanks

Did you try to get into recovery after charging it? You could reflash that way or nvflash it again.
But WHY THE RUM?!!!

Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.

joeaux said:
Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.
Click to expand...
Click to collapse
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline

JacquiG said:
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline
Click to expand...
Click to collapse
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7

wptski said:
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7
Click to expand...
Click to collapse
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui

JacquiG said:
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui
Click to expand...
Click to collapse
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.

wptski said:
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.
Click to expand...
Click to collapse
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.

JacquiG said:
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.
Click to expand...
Click to collapse
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?

wptski said:
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?
Click to expand...
Click to collapse
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful

JacquiG said:
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful
Click to expand...
Click to collapse
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.

wptski said:
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.
Click to expand...
Click to collapse
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Another thought: would moving to a linux machine open up more possibilities?

JacquiG said:
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Click to expand...
Click to collapse
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.

wptski said:
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.
Click to expand...
Click to collapse
no sound when turned off and plugged into usb

JacquiG said:
no sound when turned off and plugged into usb
Click to expand...
Click to collapse
Only one last suggestion is to redownload 2.2 and flash again.

wptski said:
Only one last suggestion is to redownload 2.2 and flash again.
Click to expand...
Click to collapse
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!

JacquiG said:
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!
Click to expand...
Click to collapse
I can put my copy in DropBox and give you the link if you want?
Here's a link to my copy: https://dl.dropboxusercontent.com/u/21386595/Restore to 2.2.rar

[CLOSED] Stuck in bootloop - Cant load a recovery

Hello,
I tried to flash Slim ROM on my TMo HTC One and I accidentally soft-bricked it.
First, I unlocked the bootloader, put the zip folder in storage and then went straight for flashing a ROM.
Since then, I am stuck in a bootloop even when I try to run recovery - I flashed TWRP.
Can anoyone help?

nonaresu said:
Hello,
I tried to flash Slim ROM on my TMo HTC One and I accidentally soft-bricked it.
First, I unlocked the bootloader, put the zip folder in storage and then went straight for flashing a ROM.
Since then, I am stuck in a bootloop even when I try to run recovery - I flashed TWRP.
Can anoyone help?
Click to expand...
Click to collapse
yes, this is pretty simple:
You can boot into your bootloader by pressing the power button for a long time and if the display turns off, press the volume down button and hope you jump into your bootloader.. try this out until you manage to get into your bootloader. If this doesn't work, you should hold your phone below a bright light so the sensor recognizes it.. then play around with your power button and volume buttons and you should be able to boot into your bootloader. Then connect your phone to the PC and use this fastbootcommand after you navigated to fastboot on your phone:
Code:
fastboot erase chache
Now you should be able to boot into your recovery..
If it helped, hit the thanksbutton or ask other questions by quoting my post so I get notified and I can answer
If you managed to enter the recovery, say it, I write further instructions... Because if I write it now and the steps above didn't work... I wrote it for no reason and yeah... just say it

LibertyMarine said:
yes, this is pretty simple:
You can boot into your bootloader by pressing the power button for a long time and if the display turns off, press the volume down button and hope you jump into your bootloader.. try this out until you manage to get into your bootloader. If this doesn't work, you should hold your phone below a bright light so the sensor recognizes it.. then play around with your power button and volume buttons and you should be able to boot into your bootloader. Then connect your phone to the PC and use this fastbootcommand after you navigated to fastboot on your phone:
Code:
fastboot erase chache
Now you should be able to boot into your recovery..
If it helped, hit the thanksbutton or ask other questions by quoting my post so I get notified and I can answer
Click to expand...
Click to collapse
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself

nonaresu said:
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself
Click to expand...
Click to collapse
I would simply reflash recovery (maybe a different one) to make sure it's not the file you have

nonaresu said:
thank you for your quick response, unfortunately, after erasing cache before and I still got stuck in bootloop (didnt work this time either).
Entering Recovery... appears on top of a screen and nothing happens for a long time before the phone reboots itself
Click to expand...
Click to collapse
ok.. in that case we have to do some other stuff..
Download the TWRP recovery, it's know to work better than CWM at it's current state, you can download the file for your HTC One here:
http://techerrata.com/browse/twrp2/m7 (credits to: http://teamw.in/ thanks for your awesome work!)
Then when you are in the fastboot mode, use this command:
Code:
fastboot flash recovery "C:\pathToYourRecovery\recoveryname.img"
Then boot into recovery... and if this doesn't work too, try this command:
Code:
fastboot boot "C:\pathToYourRecovery\recoveryname.img"
If you were able to get into the recovery, or if you were not able, pls answer

!! :good: It worked and I got successfully booted the recovery, I think I was flashing a wrong version of twrp before

Please help me I feel so frustrated.

My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something

Is your volume down button is working ??
please help me 12 said:
My device is Mi Max 2 today I tried flashing some custom rom which is because yesterday it was normal but it suddenly restarted when I tried booting it up it went to recovery mode btw my recovery mode is TWRP so I tried to just flash a rom again but after its done flashing It keeps booting into TWRP so I was searching online and decided to go back to stock I used the Miflash but after it successfully flashing again This time I can no longer access bootloader my volume up does not work anymore only down and power and im back to stock recovery mode tried accessing MiPcSuite but to still no avail. Please help im seriosly sad like frustrated beacuse I have been trying to find for a fix since yesterday.
Is my volume up broken? is it the reason why I can't access the bootloader. everything went south since yesterday.
I would like to add that the power and the volume buttons where acting funny yeterday when it was doing just fine could it be my volume button but why does it keep booting on TWRP Thinking about it I was getting out of the bath could have damage the volume buttons or something
Click to expand...
Click to collapse
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions

beingtejas said:
By using volume down and power you can boot to fastboot and then try flashing the Rom using fastboot method
Second if you find other max 2 , you can restore the partition from other max 2, partition you have to restore are boot , system, system image, cust ( dont restore efs ,firmware partitions
Click to expand...
Click to collapse
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery

Did you unlocked the bootloader
please help me 12 said:
Sorry for late reply Im stuck at the Mi-Recovery 3.0 I cant access fastboot. only recovery
Click to expand...
Click to collapse
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)

beingtejas said:
Did you tried volume - and power button to get into fastboot.
If your device boots you can also try adb method to boot into bootloader ( fastboot)
Click to expand...
Click to collapse
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode

If it boots into fastboot mode you can use commands to flash stock miui rom from ther
please help me 12 said:
I did but it just boots me up into fastboot mode btw I got this into service center and they tried using EDL and flash a rom but after flashing it still only boots into recovery mode
Click to expand...
Click to collapse
I have the whole detailed process before , you will find if you search the thread..

beingtejas said:
I have the whole detailed process before , you will find if you search the thread..
Click to expand...
Click to collapse
Well the thing is after flashing the official rom it still boots back into recovery mode.

Then you have to try flashing again
please help me 12 said:
Well the thing is after flashing the official rom it still boots back into recovery mode.
Click to expand...
Click to collapse
If you can.. tell one thing , do your device is able to boot in fastboot ??

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
heres an update I was somehow able to boot into fastboot mode and installed TWRP and then I tried to flash ROM's into it it says sucessfully but it boots me right into TWRP again.

beingtejas said:
If you can.. tell one thing , do your device is able to boot in fastboot ??
Click to expand...
Click to collapse
is there somewhere we can chat?

https://chat.stackexchange.com/rooms/94776/discussion-on-question-by-need-help-mi-max-2-soft-bricked check this up theres also one guy whos helping if you want to help just use this.