I tried to install aokp 38 and got assert failed..
I follow the guide but it doesnt work.
Help please..
Sent from my Galaxy Nexus using XDA
A simple search would help. Try flashing glitch kernel first, and it should work once you reboot into its recovery.
Sent from my SGH-I897
I deleted assert lines in update-script file, its working now.
Sent from my Galaxy Nexus using XDA
Related
i am new to this. i downloaded cm10 and put that into my sd card. next i rooted the phone using superoneclick. i checked the root status using an app. it showed successful rooting. next i wiped all the data as i was instructed. then i chose update from sd card and selected the cm10.zip file.
some installation process initiated and then aborted again giving the following error:
E:Error in /tmp/sideloadpackage.zip (status 7)
any way around this?
You have to have cwm installed to flash custom roms
Sent from my GT-S5570 using xda premium
apklike18 said:
You have to have cwm installed to flash custom roms
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Follow this thread:
http://forum.xda-developers.com/showthread.php?t=1342190
What?I need to go to that thread:?
Sent from my GT-S5570 using xda premium
apklike18 said:
What?I need to go to that thread:?
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Not u, the op...
Sent from my GT-S5570 using xda app-developers app
Lol, hilarious!
Lol OK
Sent from my GT-S5570 using xda premium
khurram6050 said:
i am new to this. i downloaded cm10 and put that into my sd card. next i rooted the phone using superoneclick. i checked the root status using an app. it showed successful rooting. next i wiped all the data as i was instructed. then i chose update from sd card and selected the cm10.zip file.
some installation process initiated and then aborted again giving the following error:
E:Error in /tmp/sideloadpackage.zip (status 7)
any way around this?
Click to expand...
Click to collapse
Either it is the problem of CWM or the downloaded file plzz redownload the file......:good:
I never face dis type of problem on any phone....??
lol
pratyush369 said:
Either it is the problem of CWM or the downloaded file plzz redownload the file......:good:
I never face dis type of problem on any phone....??
Click to expand...
Click to collapse
Oh please... I bet he was flashing through stock recovery...
used the instruction in the Cyanogenmod wiki and I'm stock - i could install any rom - not cm10, 9.1 or 7.2. The error i get is this :
Code:
Installing update...
assert failed: getprop("ro.product.device") == galaxys" || getprop("ro.build.product") == "galaxys" ||
and so forth..
I tried installing it under Windows 7 at first, but zadig.exe crashed every time i tried enabling "List all devices", so i tried running it under Ubuntu - and the process worked. Yet, under CWM recovery - the installation failed.
:crying:
I guess your CWM is rather old. You can download the latest version at the Android Development thread or try something else like TWRP.
Sent from my GT-I9001 using xda app-developers app
nabilimran said:
I guess your CWM is rather old. You can download the latest version at the Android Development thread or try something else like TWRP.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
i would rather use what i know - which is CWM - could you link me with an updated version i could load to the phone the way it's written in Cyanogenmod wiki? (heimdall flash..)
thanks
I'm not really a CWM user and I'm using a Galaxy S Plus I9001. In the I9001 Development Thread, someone ported CWM and update it to be usable for the S Plus since CWM does not provide the recovery for S Plus users.
To be on the safe side, here's the link
http://www.clockworkmod.com/rommanager.
Sent from my GT-I9001 using xda app-developers app
iv looked for it here and tried many different ways of googleing it and i get to links but the download is dead. can anyone post it or tell me how to find it please. tryin to flash cm10 or any cm lol and just incase im on the cdma ver of the galaxy tab. thanks in advace
Cwm comes with a kernel.
Why do you need to it, may I ask?
You can use cwm4, then when you flash, say cm10, you get cwm6 anyway.
So what is the goal you have in mind?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Cwm comes with a kernel.
Why do you need to it, may I ask?
You can use cwm4, then when you flash, say cm10, you get cwm6 anyway.
So what is the goal you have in mind?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
whats going on youre the one who always helps me and im very thankful for that. sorry for the crazy questions i havent been on this fourm since i got my gs2 way back when. and now i put everything into my lg optiums g. i just wanna get to the most stable build of cm9 or 10. i have energy rom right now and cwm4. just came from sock. from what i read and i could be mistaking cuz i feel like i read endless thread containing different info that i need ext4 witch i have the zip and cwm5. i try and flash cm10 cuz i know the recovery lays in the zimage but it gives me a status 7 and aborted.
Maybe people expect me to reply first.
Haha.
Well, cm install takes care of the ext4.
Yes the assert error is known.
You need to edit the updater script to remove the line.
But make sure you download cm for p1c and not other.
Please see this thread
http://forum.xda-developers.com/sho...ighlight=updater-script+meta-inf#post37595824
Sent from my GT-P1000 using xda app-developers app
priyana said:
Maybe people expect me to reply first.
Haha.
Well, cm install takes care of the ext4.
Yes the assert error is known.
You need to edit the updater script to remove the line.
But make sure you download cm for p1c and not other.
Please see this thread
http://forum.xda-developers.com/sho...ighlight=updater-script+meta-inf#post37595824
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thank you. i havve the right files so all i have to erase is assert(getprop from, assert(getprop("ro.product.device") == "galaxytab" || getprop("ro.build.product") == "galaxytab" ||
getprop("ro.product.device") == "GT-P1000" || getprop("ro.build.product") == "GT-P1000"); ?
i know mine may not look the same im just using yours as an example. also i just tried this and im getting and error again with tryin to edit im on windows 8
Did you do it in 7zip? You can't extract all and rezip. Windows can't handle case sensitive filename.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Did you do it in 7zip? You can't extract all and rezip. Windows can't handle case sensitive filename.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
well i dont have 7zip since im on windows 8 im just using the windows one on 8.
Have you tried Galaxy Cube 3 or Energy Rom?
http://forum.xda-developers.com/showthread.php?p=21715469
It "should" has CWM 5 in it.
I am not 100% sure.
priyana said:
Have you tried Galaxy Cube 3 or Energy Rom?
http://forum.xda-developers.com/showthread.php?p=21715469
It "should" has CWM 5 in it.
I am not 100% sure.
Click to expand...
Click to collapse
Cube3 has CWM4. Don't know about energy.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
Cube3 has CWM4. Don't know about energy.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
sorry iv ben away in killington vt for a few days. back to work lol im running energy now and that and cubed have cwm 4. i cant get cwm5 on here at all iv been read and tring to download i always end up at a dead end. any other ideas?
so after digging around on my old hard drive i found the .tar file from awhile ago before i had to revert. if anyone come across this pm me and ill get it to you. thanks to everyone who helped me with this problem
Hi there.
So what is the tar file? Stock ROM or cwm5?
Sent from my GT-P1000 using xda app-developers app
Its a .tar file containing cwm5 but i think its only for cdma tabs.
Sent from my LG-LS970 using xda app-developers app
Hello everyone I was porting SlimBean From the Haeuwei Asccend to Ace but there was a set_per status 7 error while installing the rom. I have made a patch to fix the camera bug.This rom would just run great on Ace if anyone of you would help me to modify the updater script.
I followed this guide http://forum.xda-developers.com/showthread.php?t=1908008
LINK TO BASE updater-script http://www.mediafire.com/?z7fg674bob87sj3
LINK TO PORT updater-script http://www.mediafire.com/?85nhqc35pvkzskb
just use cm10.1 update script
Sent from my S500 using xda app-developers app
Did you ever get this to work, I have tried a few times, and haven't had success yet.
Thanks.
Hardly,as he is suspended from forum
Sent from my P760 using xda app-developers app
Tried to edit post as I saw the account was disabled - had to wait five minutes. Thanks for the quick snark!
Hello guys, I've been stuck with this for a couple of hours now, I try to install cynanogenmod in my GT-P1000 follow the guide as usual everything was normal but when it came time to use the device it's not taking any input not on the touch screen nor in the physical buttons.
Can someone give me a hint on how to repair this? I've been looking at similar thread but the recomend downgrading the firmware if someone can point me out how to do it it would be a big Help!!
Thanks
Maybe you flash P1000 rom on a P1000L or N
Or the other way round.
Sent from my GT-N7100 using xda app-developers app
I try to use the P1000N but it was rejecting, I don't want to try it with CDMA because AFAIK it can turn my phone into a brick. So Yes I beleive I have the P1000 l(GSM). Any other advice
The L and the normal P1000 differs exactly that. The touch screen.
Just flash a L or N rom again.
Sent from my GT-N7100 using xda app-developers app
Even if in the back of my Tab specificly saids: Modelo:
GT-P1000N I try with N but it does not even pass the assert of
getprop("ro.product.device") == "galaxytab" || getprop("ro.build.product") == "GT-P1000N"……
priyana said:
The L and the normal P1000 differs exactly that. The touch screen.
Just flash a L or N rom again.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
You can remove the assert line if you are sure that is your model.
Search this forum.
For example
http://forum.xda-developers.com/showpost.php?p=31519426&postcount=186
A bit of note. If you are using windows, it doesn't understand the case sensitive file names within the zip. So don't try to unzip, edit, rezip. That will break the zip.
One way is to use 7zip, drag out the updater script. Edit it, then drag back in.
Sent from my GT-P1000 using xda app-developers app
priyana said:
You can remove the assert line if you are sure that is your model.
Search this forum.
For example
http://forum.xda-developers.com/showpost.php?p=31519426&postcount=186
A bit of note. If you are using windows, it doesn't understand the case sensitive file names within the zip. So don't try to unzip, edit, rezip. That will break the zip.
One way is to use 7zip, drag out the updater script. Edit it, then drag back in.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
If I do that I get a Installation aborted every time I must be doing something very wrong
I have it in stock GT-P1000N again can someone point me out a good guide to do it I was trying to do it with:
http://theunlockr.com/2012/05/07/ho...-on-the-galaxy-tab-p1000-running-gingerbread/
And the official cynanogenmod
http://oldwiki.cyanogenmod.org/wiki/Samsung_Galaxy_Tab_(P1000N):_Full_Update_Guide
My problem with this one was the fatc that wenever I install CWM it was unable o pass the boot screen of galaxy, I could entered the CW mode but whenever I try to install something it would just not posssible
necronet said:
If I do that I get a Installation aborted every time I must be doing something very wrong
Click to expand...
Click to collapse
You sure you modify the updater and drag it back , not unzip the whole thing and rezip?
When you fail to install, what is the new error.
Can't be assertion error again after removing those lines.
Sent from my GT-P1000 using xda app-developers app
Then I did it wrong I just rezip the whole thing, what do you mean drag it back?
priyana said:
You sure you modify the updater and drag it back , not unzip the whole thing and rezip?
When you fail to install, what is the new error.
Can't be assertion error again after removing those lines.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Use 7zip to open the zip. Literally use the mouse to drag the updater script out to desktop. Edit as per Alroger's post.
Save.
Then while still having the 7zip opening the zip, drag back the updater script into the Rom.
Btw, make sure you have the original zip.
The one you have molested earlier is bad already.
Sent from my GT-N7100 using xda app-developers app