Hi,
My screen doesn't sleep after 15 seconds, the problem appeared after ICS update. Do you know a solution to this problem ?
Thanks
This might sound trivial but have you tried setting it to higher value, lock/unlock and then set it back to 15 seconds ? I've recently noticed that some settings are not properly carried over after an update.
unfortunately still the same problem
Related
Hello!
I've got an annoying Problem with my xda2.
If it's in standby mode for a longer time than 5-10 minutes, there comes no Sound at incoming call/sms/mail anymore. If i go into the sound settings, the phone doesn't play the sound of the ringtones, but vibration works well.
I can only solve this problem,if i reboot the phone.
I turned on wakeuponsms,but this didn't work-after some time in standby mode no sound...
I did a hard reset today morning and didn't use any tweak and the problem came back.
Does anyone got an idea to solve this?My friend got same phone and got the same problem.
Now i turned of Sound for incoming mail, for testing, if this could be a problem,but i suspect this won't work.
thanks a lot & greets
Sandra
Hi
I had this problem, I think the issue is caused by the phone not having enough time to play the sound before it is goes back to standby.
I used the Advanced Configuration tweaker and changed the value under "Battery resuming from suspend timeout" to 10 seconds, which seems to have fixed it.
Regards
Phil
Hi PhilipL.
Thanks for your solution.
Any suggestion for problem with indicating light that blink only for 1 or 2 minutes and after stop (when Topaz is in stand by mode for more trhan 10-15 minutes)?
I would like that light continue to blink up to I will read the sms or e-mail arrived...
Thank you!
I did a new install and now everything works fine.
I don't know, if it's one software i didn't installed again or something else...
Hi everyone,
some days ago, I've got a new display into my phone. It is working fine and everything is running good except two things:
- The phone app does hang during an outgoing call. I cannot hang up the call, because there is a black screen, or the phone does not accept input either. When the screen keeps black, I can go back to the home screen pressing the middle button. But in the "system tray" there is no phone symbol. The behavior is changing from call to call. Sometimes the process crashes.
- When the phone is not used for some seconds or minutes it takes up to ten seconds to see someting after pressing the middle button. An interesting aspect is that when the mp3 player is running, there is no delay. Whenn I press the middle button the screen comes back immedialtely.
I have the Firmware 2.2.1 running and executed a hardware reset two times.
Has someone an idea what I can do to bring the phone app to work properly and to decrease the delay when I want to get the from out of the "sleeping mode".
Please excuse my bad english, I hope you got me right
What do you mean by a new Display...I assume you mean a new ROM or kernel and not actually replacing the screen.
Are you using any sort of app that controls or underclocks the CPU such as SetCPU? I used that app for a while to underclock the CPU while the screen was off and it caused the sort of hanging when answering calls that you described.
Also if this is a new kernel confirm that is is not underclocking or using UV to lower the voltage.
Thank you for your reply.
I replaced the display for hardware damage reason. No new kernel or something like that.
I've done 2 hardware resets. So I just have some standard apps on my phone.
Is there some app wich dispays the voltage and frequency of the cpu?
Ok guys, the problem is "solved".
I thought, that I would have to live with my delay und phone problems forever
But this weekend, my phone decided to workl properly as before. There is no delay when bringing back the screen from sleep and no process hanging up anymore. I did not invest more energy to solve that problem.
I dont know what happened internally, but I am extremly happy now
Hi again. I'm having a very weird issue, and I thought it was related to my camera problem [now partially solved] because this started happening after the camera incident. The screen will suddenly and randomly turn off, or switch to the highest brightness. To fix it, I have to lock the screen, then unlock it.
I searched and this thread showed up. It's exactly my problem, but I can't do what he did, since I'm not in Brazil. I'm running Kang's CM7.
Is the latest fix important? I haven't installed it because I'd have to wipe everything [again] and I'll need a whole weekend to get my stuff together once more, but if this is key to fix the screen, I'll do it.
I have the same problem, I havent found a solution. Have you found a solution?
Same for me
Same problem for me... the screen suddenly set to highest brightness (only sometimes) and after a few seconds, the screen turn off itself. Sometimes turn on itself in 10-20 seconds but already times, I need lock it (with power butom) and unlock again.
I was testing with a bounch of ROMs (CM7, GB, ICS, etc), but problem always is present. I was cleaned the usb port pins (see that solution from other post) and nothing happen.
...sorry for my english
You can try to reflash the stock rom from www.samfirmware.com based on your region..
hello.. I have a problem with my s3mini i8190N.my display is ligthing up with no reason.after i push the power buton to block the screen he lights up 3-4 times and then stays black..if i leave it like this he lights up again in 10-50 minutes again and so on.like it is alive). can anyone tell me what is wrong.i instaled stock rom(many roms from december - august) and still display lights up.i instaled 4.2.2 (cm10.1,pac,aopc) and same problem. only on cm10 4.1.2 the problem disapared.it is a software problem or what?is something disabled or not present in cm 10 that makes display act normal?
many thanks if someoane can give me a hint at least.
Hi,
I have a problem, one day I noticed that when I increase the screen brightness at certain point the screen would set to 0% brightness, I tried rebooting but I noticed that the brightness continued in 0% when showing the huawei logo, and also in recovery, I also tried upgrading to Nougat but that didn't solved the issue, so I was wondering I someone has the same problem and a possible solution. Thank you in advance.