Hello!
I've got an annoying Problem with my xda2.
If it's in standby mode for a longer time than 5-10 minutes, there comes no Sound at incoming call/sms/mail anymore. If i go into the sound settings, the phone doesn't play the sound of the ringtones, but vibration works well.
I can only solve this problem,if i reboot the phone.
I turned on wakeuponsms,but this didn't work-after some time in standby mode no sound...
I did a hard reset today morning and didn't use any tweak and the problem came back.
Does anyone got an idea to solve this?My friend got same phone and got the same problem.
Now i turned of Sound for incoming mail, for testing, if this could be a problem,but i suspect this won't work.
thanks a lot & greets
Sandra
Hi
I had this problem, I think the issue is caused by the phone not having enough time to play the sound before it is goes back to standby.
I used the Advanced Configuration tweaker and changed the value under "Battery resuming from suspend timeout" to 10 seconds, which seems to have fixed it.
Regards
Phil
Hi PhilipL.
Thanks for your solution.
Any suggestion for problem with indicating light that blink only for 1 or 2 minutes and after stop (when Topaz is in stand by mode for more trhan 10-15 minutes)?
I would like that light continue to blink up to I will read the sms or e-mail arrived...
Thank you!
I did a new install and now everything works fine.
I don't know, if it's one software i didn't installed again or something else...
Related
Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433
Hi all,
I've searched high and low for a solution to this and am desperate to have a resolution. My problem is when a text message comes in my phone wakes up and doesn't go back to sleep/standby (even though its set to shut off after 1 minute of inactivity). I have disabled all notifications when an SMS arrives, but still the phone ignores this and wakes up the screen and doesn't disable it again (quickly draining the battery).
Does anyone have a solution for this? A registry tweak/software package?
this should not be happening. Do you have any third party software like phonealarm configuring your notifications.
If not, you may need to do a hard reset to fix this because it should not happen. You can also try downloading memaid (full version needs to be purchased), which has a tool to clear the notification queue.
I'll check out what I have installed that might be causing this....
Sounds like it might need a hardware reset (sigh)
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
mackerman said:
I have had my Diamond for about 5 days now. The other day I noticed it will get stuck in a constant weak vibrate. It seems that a vibe event will cause it to start, like the phone doesn't know to stop vibrating.
I call it weak, because while it is doing this, I can go to volume settings, select Vibrate and the much stronger vibrate even occurs. It seems if I shake the phone or move it around a bit the weak vibrating will stop.
Also shaking the phone sometimes causes this weak vibrating to begin.
Sounds like a mechanical issue ? I have installed some apps like GSen & SensorLock. A couple others like Advanced Config and done some of the registry tweaks.
Any suggestions would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Un install sensor lock and test. i had this issue with an old version ofthat application.
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Just giving an update. The phone has stopped doing this strange vibrate action. Not sure if it was related to the program un-installation or not. As stated above it continued to do the vibrating action after the program was uninstalled, but definitely less frequently.
I had something very similar the other day. I'm using the swift ROM.
Its never happened before, and i've been using this same rom a for a while now.
ya i have the sprint diamond and mine did that the one time when i took it off the charger. it would vibrate pulses and the phone was like frozen. So i plugged it back in the charger and uninstalled sensorlock and its fine now
mackerman said:
I have uninstalled both GSen (Since it wouldn't rotate SMS for me on Sprint Diamond) and Sensor Lock. The device is still doing this strange vibrate.
I noticed even when I hold the power button and turn it off (soft reboot?) it continues the odd vibrate. The vibrate will however stop when I remove the battery.
Click to expand...
Click to collapse
Somewhat off topic but did you find anything that rotates in SMS on the Sprint Diamond?
Don't blame it on Sensor Lock. I don't have that program installed & mine started vibrating non stop the other day. I couldn't get it to stop & finally did a hard reset. It still continued to vibrate all the way to the point where it got to the green Windows Mobile screen. It stopped, after that & it hasn't happened again since (this was on Saturday). I had done some of the reg tweaks for TF3D performance & nothing else.
sensor lock was the only program i had installed so it was the reason for me. as far as i know only way to rotate SMS with sprint diamond is the long press key
I have also done some of the reg key tweaks on my diamond. It did happen again last night, but before that it's been a few days. I had GSen installed, and it wasn't rotating on SMS, I think I read it wouldn't work with the Sprint Diamond.
What is the long key press method?
Hi everyone,
some days ago, I've got a new display into my phone. It is working fine and everything is running good except two things:
- The phone app does hang during an outgoing call. I cannot hang up the call, because there is a black screen, or the phone does not accept input either. When the screen keeps black, I can go back to the home screen pressing the middle button. But in the "system tray" there is no phone symbol. The behavior is changing from call to call. Sometimes the process crashes.
- When the phone is not used for some seconds or minutes it takes up to ten seconds to see someting after pressing the middle button. An interesting aspect is that when the mp3 player is running, there is no delay. Whenn I press the middle button the screen comes back immedialtely.
I have the Firmware 2.2.1 running and executed a hardware reset two times.
Has someone an idea what I can do to bring the phone app to work properly and to decrease the delay when I want to get the from out of the "sleeping mode".
Please excuse my bad english, I hope you got me right
What do you mean by a new Display...I assume you mean a new ROM or kernel and not actually replacing the screen.
Are you using any sort of app that controls or underclocks the CPU such as SetCPU? I used that app for a while to underclock the CPU while the screen was off and it caused the sort of hanging when answering calls that you described.
Also if this is a new kernel confirm that is is not underclocking or using UV to lower the voltage.
Thank you for your reply.
I replaced the display for hardware damage reason. No new kernel or something like that.
I've done 2 hardware resets. So I just have some standard apps on my phone.
Is there some app wich dispays the voltage and frequency of the cpu?
Ok guys, the problem is "solved".
I thought, that I would have to live with my delay und phone problems forever
But this weekend, my phone decided to workl properly as before. There is no delay when bringing back the screen from sleep and no process hanging up anymore. I did not invest more energy to solve that problem.
I dont know what happened internally, but I am extremly happy now
I noticed the vibration just stops working, no matter if it's haptic feedback or a notification. After a while, it starts working again. Reboot doesn't always help.
"But... sometimes I can type one, maybe two words and it disappears, sometimes I can write long e-mail and it works fine. If haptic vibration disappears it comes back after 1 - 2 minutes with screen off. Really strange. Just checked it again. It turned vibrations off when I started to type very fast.
I did "Diagnostics / vibrations" test before trying to reproduce this error. Vibrations were working fine. After haptic feedback disappeared vibrations in diagnostics stopped working too. Left the phone with screen off for two minutes. Vibration came back.
What's more funny. Sometimes haptic disappears and few words later it starts working again."
See over here http://talk.sonymobile.com/t5/Xperia-Z1/Vibration-issue/m-p/410459#M2706
I'm on a rooted stock 1.534 firmware with locked bootloader.
Does anybody else have this problem?
EXPERIENCED this in my z1 but my z1 more than you expected, at first the problem is like yours, but after that it working for about 2 aec and it gone again. i restart, reboot, factory data settings, the vibration is not working anymore. even when you start up the phone from the power button. can anyone HELP and figure this out??
My Z1(C6902) vibration doesn't work also, anyone can help?
i have also problem with the vibration sometimes....when lay down for example....and i type something it just stops suddenly..and i dont feel the vibration anymore...but when moving the phone some directions..it seems the vibration comes back...also some keys have stronger vibration than other keys
Andy_27 said:
i have also problem with the vibration sometimes....when lay down for example....and i type something it just stops suddenly..and i dont feel the vibration anymore...but when moving the phone some directions..it seems the vibration comes back...also some keys have stronger vibration than other keys
Click to expand...
Click to collapse
mine is not strong enough when receiving notifications
Mine working just fine but I will reccomend few things:
Check in Settings > Sound if everything in selected, Vibrate on Touch, Vibrate when Ringing..
Turn-off the vibration on touch, it consume battery. Select only sound on touch and Set-up vibration only for Alarms and Notifications.
Sometime the feeling of the vibration can be confused, with long press will be vibrate more and vice-versa.
It's your choice.
I have this problem to please someone fix I'm on rooted 257 locked bootloader
Really annoying always late replying to messages I receive because the phone just does not vibrate most of the time..
Sent from my C6903 using Tapatalk
sorry guys to revive this thread, but I am facing this problem too... someone that had this problem found a fix? or the only way is send it to sony?
Got the same ****
I have this problem too!
I'm in the same boat with mine. Considering sending it in for repairs under warranty.
Has anyone done this? Any success?