Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution
I recently got my XT894, Droid 4 in the mail, and hooked it up to Rogers Wireless in Canada.
When I was receiving phone calls, the built in dialer would tell me that "Pay Phone" is calling, the solution to contact the Rogers Customer Care, and have them remove the "Name Display" option.
Rogers has 2 services for call display:
Name Display (which does a phonebook lookup from Roger's Side)
Call Display (the number of the dialer who is trying to dial you)
Most motorola radios don't actually support these 2 features together, so Blur reads it as "Pay Phone". After contacting Customer Service, have them remove ONLY "Name Display". I restarted my phone then everything started working properly again.
I hope this helps someone!
First off, I wanted to say that I'm on the leak 6.16.206
I also got mobile hotspot working on Rogers (this solution may apply to other rooted users running on different providers).
I added the APN settings as defined originally here: http://forum.xda-developers.com/showpost.php?p=20366961&postcount=2
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: dun
otherwise, any other fields are showing as <not set> OR None
When I tried to add dun to the apn type, the moto UI told me only providers could add DUN types, so I went into SQLite Editor -> Phone/Messaging Storage -> telephony.db -> carriers -> Located the last APN which I added manually, scrolled over to "type" then long pressed that field, chose "edit field" and added dun. Once completed, I restarted my phone. I now have the stock mobile hotspot app working (I had to also disable the entitlement check earlier) on Rogers!
Now wait, you got a Droid 4 working on Rogers????
bean1975 said:
Now wait, you got a Droid 4 working on Rogers????
Click to expand...
Click to collapse
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
I can confirm that the Droid 4 works on Rogers. Took a week of fiddling, but it works.
Received the Droid 4 with 2.3.4 installed. Did the over-the-air updates to 4.0.4. Rooted it, installed SafeStrap 3, and installed Olegfusion's CM10/JB ROM (4.1.2), and was off to the races. Shows "E", "3G", and "H" when accessing the Internet.
have you ever try with stock kernel?
I wonder not to update to CM10 right now. I have a problem, it seems to connect, 3G/H letter, bu no tranmition. I have an old jaj, Droid3 working perfectly with same APN records.
Any thing that could help me??
danifunker said:
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
heymon79 said:
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
Click to expand...
Click to collapse
LTE on this phone is not compatible with the Rogers network. If you want a Rogers LTE phone, pickup the Motorola RAZR HD. The phone will operate on 3G or 3.5G, although we in Canada consider HSPA+ to be "4G".
LTE can give you rates of up to 100mbps usually gives you about 25-30mbps
HSPA+ can give you rates up to 12-15mbps I usually get 4-5mbps
I hope that helps!
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
imeem said:
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
Click to expand...
Click to collapse
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
danifunker said:
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
Click to expand...
Click to collapse
so you're saying that all droid 4 are already unlocked?
Yes. They are still blocked against US GSM carriers but will work fine everywhere else, no locks.
Sent from my DROID4 using Tapatalk
Maybe someone can help me, I'm on Rogers. I have this same issue on Stock ICS .217 and on CM10. I can make phone calls and send text messages, but I cannot receive either. When I put my sim card in to another phone, I start getting my text messages. Any ideas on how to remedy this?
Have you tried another SIM card in your phone? Sounds like you have something wired. I would also check to make sure you are in global mode on the phone.
Sent from my XT894 running CM10
BTW where did u guys get your droid 4 if you're from canada? from ebay?
imeem said:
BTW where did u guys get your droid 4 if you're from canada? from ebay?
Click to expand...
Click to collapse
I got mine from xda but now that's closed...
Sent from my XT894 running CM10
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Terrible Reception on Telus (stock 217, -100dBm)
bean1975 said:
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Click to expand...
Click to collapse
I went through the process today and got my stock Verizon 217 Droid 4 working on Telus. I verified the Telus APN settings, went through forcing GSM/UMTS and UMTS-only mode, but still have terrible reception: 1-2 bars, -100dbM. Any thoughts for getting better signal?
[SOLVED] DROID 4 Canada SMS/voice only, no data on Rogers/Fido - help!
SOLVED! see below.
Droid 4 from Ebay, $135 or something + shipping. Replacing my string of bad luck with i927's from smartphone_wholesale (aka Cell Phone Forever) on ebay (tho the 1st one they sent was great til i lost it).
SMS/Voice is fine but cannot do any cell data on it. Following all settings on fido's site for APNs the fido-core-appl1.apn doesnt work. Had to manually put it in (APN list was blank). Tried my wife's Roger's sim, it populated the APN list itself (4 of them, all combos of internet w or w/o MMS, and rogers +/- 'internet' in the name). None of them work either (they match what's in the fora here and on the rogers site, rogers-core-appl1.apn etc).
Im a bit of a newb: is my phone not unlocked properly or something? What gives? Radio is set to global or GSM/UMTS (CDMA doenst work of course). What's the solution here?
System version: 98.72.18.XT894.Verizon.en.US
Android Version: 4.1.2
Baseband Version: CMDA_N_05.25.00R LTEDC_UI_09.1D.00
Kernel: 3.0.8-g473e586
Build #: 9.8.20-72_VZW-18 Feb 8 13:11:57 2013
yes mobile data is on (and roaming set to yes but phone states it's not roaming now)
every time i've added apn's and saved i've rebooted (and rebooted twice with wife's SIM in too, in case settings had to go sim -> phone + reboot, etc). No luck any way ive tried.
Thanks for help.
[UPDATE]
belay that request cadet!
Ok I just removed the wife's sim and put mine in, rebooted, and this sim (fido) doesnt populate the APN list. I was in the middle of inputting settings for it, hadn't finished and a buncha text+ came in and wifi is off (I saw I was on Edge, big blue E on status bar). Then before I could even react I had hit save, and data turned off.
Yep, removing "internet" from the APN 'type' works fine. Leave it blank.
W t f. Maybe someone can explain that shiz to me.
Related
Hey, I'm in Australia (GSM) and I purchased a Motorola Droid 3 (XT862) from America a few months ago.
Should I have bought the XT860 (GSM version)?
I was with Optus but because they don't support the 850mhz network I switched to Vodafone because they had it. So now I atleast have data working on my phone after those months of not having it, but vodafone sucks, especially on this phone (text messages sometimes don't send/signal cuts out all the time) but the 3G is very good.
The phone I previously had before the Droid 3 was a HTC Tmobile G2 which I had also bought from America, and everything worked perfectly.
If I buy the XT860 will it fix everything?
On the Motorola website it says the XT862 and XT860 have the same networks... but the XT680 is supposed to be used on GSM, so would it work fine?
Sorry if I confused anyone, I'm really baked.
Thanks in advance for anyone trying to help
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
i have XT 862, on GSM and it works perfectly. More than that, I use also vodafone
The xt860 (and xt883) would not be any better; all they (along with the xt862) support UTMS 850/1900/2100mHz. Thus, you probably didn't get a lot of 3G on the Optus network (which uses 900/2100mHz). The main Vodafone 3G network in Aus is 900/2100mHz, but they are in the process of rolling out an 850mHz network.
Telstra Next-G uses 850mHz (and they have 2100mHz as well, but only in cities I believe)
Anyway, in brief: If you're willing to switch to Telstra, you should get great results. If not, Vodafone is the next best option.
I have xt862 on optus in Austraia. I just stay in global mode. I did experiment around with some of the custom roms but found weirdnesses like my calls not coming thru. I went back to stock and now im going to stay on stock until cm9 reaches release. Im not having any issues on stock.
Hope this helps
Sent from my DROID3 using xda premium
MrObvious said:
Maybe you could try the T-MOBILE AT&T hack?
Sent from my XT862 using XDA
Click to expand...
Click to collapse
Just did it, I suppose it improved the situation a tiny bit, but i'm not sure.
I will do some tests on the Telstra network, see if it's better than Vodafone.
Im using the phone in Global mode atm and I'm getting a decent 3-4 bars instead of the 1 or 2 i'd normally get which excites me
And the network type is displaying HSPA.
But I cannot send text messages, everytime, it just says "Text message not sent" which is very annoying. Anyone know anything about this? When I swapped over to Vodafone from Optus I could send texts but after a point it just stopped working...
Anyone know anything about this?
thanks
So does the droid 3 bought from usa connect to data services with optus at all?
How fast is data transfer in "global" mode?
late reply i know, but I'm on TPG [Optus network] in Qld, Aus with the droid 3 XT862.
from memory, all i've done is done the 'hack' to show actual reception, rather than 1 bar. I run the phone on the global setting.
I just ran a speedtest.net check, got an internode server in Sydney. ping 139ms, DL 5241kbps, UL 1202kbps.
OP, when you were with Optus, did you go through your account settings and make sure you had 3G data turned on for your phone, etc? I'm not trying to patronise or anything, but it always helps to start with the basics when fault finding.
Regards,
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
cevad said:
Hi All,
Im also in Australia, with Vodafone, and am looking at getting myself a Droid 3 as well.
Since the phones aren't released here, what happens about software updates? Im assuming they won't happen via OTA?
Im leaning towards the XT860, rather than the XT862, any particular reason to go for either?
Thanks,
cevad
Click to expand...
Click to collapse
No difference between them but the xt860 has more dedicated roms here. Both are the same phone and just build.prop edits are needed to get the phones up and running in 5 mins. OTA updates will still work anywhere tho if you root and mod your phone don't use use the OTA feature as you will screw your phone.
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Best place to find your APN is here:
http://ausdroid.net/apns/
Sent from my LT26i using xda premium
somemadcaaant said:
All you need to do select wcdma/gsm mode and manually put in your service provider APNs to get 3G. Find this on the Voda site.
Click to expand...
Click to collapse
I managed to get a xt862, but I cant get data working on optus? (live connected)
calls/text works - tried global mode, tried GSM/UMTS mode, tried manually selecting optus 3g network, made sure the data setting was enabled which is actually under "battery & data manager". Already manually input the optus apn.
what am I missing?
Do you have to do the tmobile at&t hack? running everything stock from factory; or will rooting the phone/install ics help?
I have the one bar reception bug which I read on another thread if that makes a difference.
nvm, got it to work, for some reason manually inputting an APN didnt work, had to find the optus site and send it via sms.
Speed isnt too bad.
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
jjabrams said:
The next problem now though is wireless hotspot. It connects but no data goes through for some reason
Click to expand...
Click to collapse
If the xt862 is the verizon version, I have read that verizon have blocked the hotspot stuff from working.
So I have ICS (AOKP) on my p1000 that I originally bought from AT&T. Since then I flashed the modem and use a prepaid T-Mobile sim card for phone calls. For the next couple months I need a data plan and have thought about using my original AT&T sim that came with the tablet to activate their $15/250mb per month plan. Since it's for such a short time, I would just leave my T-Mobile in for calls, and put the AT&T sim in if I need to check my email.
When I take out the T-Mobile sim and insert the one from AT&T, it says I need to reboot to connect to the network.
Upon reboot, I go into Settings > Wireless & Networks > More > Mobile Networks > Network Operators. At this point it searches for available networks. I see both AT&T and T-Mobile as choices. When I chose AT&T, however, it says "Unable to connect to this network at this time"
Is there something I need to do in order to enable a data service through AT&T? I haven't signed up for the plan yet, because I'm not able to connect to the network.
Thanks in advance.
I should also note that I've gone to APN settings and tried 2 different approaches I've found through these forums:
-The one for "Broadband" as described here: http://forum.xda-developers.com/showthread.php?t=1474419
-This one which is similar: http://forum.xda-developers.com/showthread.php?t=1083173
-The one for wap.cingular as described here: http://forum.xda-developers.com/showthread.php?t=1259249&highlight=wap+cingular
I've also tried the T-Mobile modem and the JK3.
I have "Data Enabled" checked and "Data Roaming".
After trying all of these settings, I'm still having the same issue when I go into Network Operators, and selecting at&t: "unable to connect to this network at this time"
Edit: I'd also love to know if, once this is working, I will have to flash the modem since I will be using data only from AT&T
I wonder if its the SIM card itself.
Do you have any other phones you could test it with or grab someone else's AT&T phone?
lollavid said:
I should also note that I've gone to APN settings and tried 2 different approaches I've found through these forums:
-The one for "Broadband" as described here: http://forum.xda-developers.com/showthread.php?t=1474419
-This one which is similar: http://forum.xda-developers.com/showthread.php?t=1083173
-The one for wap.cingular as described here: http://forum.xda-developers.com/showthread.php?t=1259249&highlight=wap+cingular
I've also tried the T-Mobile modem and the JK3.
I have "Data Enabled" checked and "Data Roaming".
After trying all of these settings, I'm still having the same issue when I go into Network Operators, and selecting at&t: "unable to connect to this network at this time"
Edit: I'd also love to know if, once this is working, I will have to flash the modem since I will be using data only from AT&T
Click to expand...
Click to collapse
I hadn't thought of that. Is this anything AT&T could diagnose? I remember when I first got my tab and popped it in that it worked.
Edit: Just called AT&T- the sim expires after 30 days. :-(
I have a rogers tablet. Same model as the at&t? Could i use this with wind mobile, as its the same frequency as T-Mobile?
Sent from my GT-P1000 using Tapatalk 2 Beta-4
Yes, as you know, you need to unlock it from your network. I prefer Helroz unlock app free in the market. You will only get EDGE speed data.
So i can use this rogers tablet on wind? Just as a 2nd clarification?
Sent from my GT-P1000 using Tapatalk 2 Beta-5
I bought a b-mobile Chameleon SIM(Japan) at this trip and I want use it on My Droid4.
But I have tried any thing what I can do, it still can't get the data connection.
My Droid4 has flashed ICS leak 219 and the voice call and data connection work prefect in taiwan's GSM/UTMS SIM card.
I also modified the username/password at /system/etc/ppp/peers/pppd-ril.options but it still didn't work.
My milestone 3 can work correctly with b-mobile U300 SIM after mod /system/etc/ppp/peers/pppd-ril.options in previous trip.
I have tried 4 device and 6 system with Chameleon SIM, only one device and one system can get connection successfully.
This is devices list:
HTC HD2(WM6.5/ICS4.04)
HTC Sensation (2.36)
HTC Sensation XL(4.03)
Droid4 (ICS leak 219 4.04/hashcode's CM9)
Only HD2 with WM6.5 can get the connection,all the Android got fail result.
But the HD2's Wifi Tether only can work in adhoc mode(WM6.5).
My Droid4 can find my HD2, but HTC Sensation XL(4.03) didn't.
I also contact with b-mobile, they say the record shows that username or password error cause connection fail.
Does any PPP connection logs on Android?
I want to check which username/password my Droid4 use to make connection.
If anyone ever get connection successful with Chameleon SIM, please tell me which settings at your device.
chowtom said:
I bought a b-mobile Chameleon SIM(Japan) at this trip and I want use it on My Droid4.
But I have tried any thing what I can do, it still can't get the data connection.
My Droid4 has flashed ICS leak 219 and the voice call and data connection work prefect in taiwan's GSM/UTMS SIM card.
I also modified the username/password at /system/etc/ppp/peers/pppd-ril.options but it still didn't work.
My milestone 3 can work correctly with b-mobile U300 SIM after mod /system/etc/ppp/peers/pppd-ril.options in previous trip.
I have tried 4 device and 6 system with Chameleon SIM, only one device and one system can get connection successfully.
This is devices list:
HTC HD2(WM6.5/ICS4.04)
HTC Sensation (2.36)
HTC Sensation XL(4.03)
Droid4 (ICS leak 219 4.04/hashcode's CM9)
Only HD2 with WM6.5 can get the connection,all the Android got fail result.
But the HD2's Wifi Tether only can work in adhoc mode(WM6.5).
My Droid4 can find my HD2, but HTC Sensation XL(4.03) didn't.
I also contact with b-mobile, they say the record shows that username or password error cause connection fail.
Does any PPP connection logs on Android?
I want to check which username/password my Droid4 use to make connection.
If anyone ever get connection successful with Chameleon SIM, please tell me which settings at your device.
Click to expand...
Click to collapse
This sounds very similar to the problem I'm having with Vodafone NL actually. But the major difference is that your problem occurs on all Android devices (except Milestone 3), and mine does not.
Do you also get the message "Sorry, this SIM is not supported. Please contact your wireless service provider" when you start or reboot the Droid 4? Or do you get a message like "unknown SIM"?
Do you have the username/password in both your APN settings and the pppd-ril.options file? Can you post the contents of the pppd-ril.options file here?
Also, which provider did you try in Taiwan? FarEasTone, Chungwa, Vibo? I hope Vibo works because that's my Taiwanese provider and I'll be back there later this year!
Sjaakbanaan said:
This sounds very similar to the problem I'm having with Vodafone NL actually. But the major difference is that your problem occurs on all Android devices (except Milestone 3), and mine does not.
Do you also get the message "Sorry, this SIM is not supported. Please contact your wireless service provider" when you start or reboot the Droid 4? Or do you get a message like "unknown SIM"?
Do you have the username/password in both your APN settings and the pppd-ril.options file? Can you post the contents of the pppd-ril.options file here?
Also, which provider did you try in Taiwan? FarEasTone, Chungwa, Vibo? I hope Vibo works because that's my Taiwanese provider and I'll be back there later this year!
Click to expand...
Click to collapse
No,I have sold my milestone3 before this trip.
And I test "bmobile U300" with milestone3 in previous trip, not "bmobile chameleon SIM" in this trip.
The U300 is 3G SIM, Chameleon SIM is 4G.(but the manual said it can support 3G/UTMS)
I didn't see unknown SIM message in CM9 and leak ICS.
My provider is Chungwa telecom.
I have tried set both APN settings and pppd-ril.options file or just in pppd-ril.options file.
It still can't get connection.
And I only modify the username and password in pppd-ril.options:
user [email protected]
password bmobile
chowtom said:
No,I have sold my milestone3 before this trip.
And I test "bmobile U300" with milestone3 in previous trip, not "bmobile chameleon SIM" in this trip.
The U300 is 3G SIM, Chameleon SIM is 4G.(but the manual said it can support 3G/UTMS)
I didn't see unknown SIM message in CM9 and leak ICS.
My provider is Chungwa telecom.
I have tried set both APN settings and pppd-ril.options file or just in pppd-ril.options file.
It still can't get connection.
And I only modify the username and password in pppd-ril.options:
user [email protected]
password bmobile
Click to expand...
Click to collapse
Right now I have 2 ideas in mind:
Have you tried forcing the phone to UMTS? My Vibo SIM in Taiwan refuses any connection if I try running it in 2G, it's 3G exclusive. This Chameleon SIM could be 3G/4G only.
After some searching, I found that this Chameleon SIM possibly only supports UMTS on the 2100 MHz band: http://www.japanmobiletech.com/2012/05/b-mobile-amazon-lte-4g-data-sim.html. It is not exactly clear which UMTS bands are supported by the Droid 4. It looks like people expect the 2100 MHz band to be supported for UMTS though. Also you mention the same problem on your HD2 except when WM6.5 is installed, so that doesn't point to a hardware issue for the HD2. But for the Droid 4, it still could be.
I found a related thread (with no replies yet) about this: http://forum.xda-developers.com/showthread.php?t=1704264
If only 1 out of your 6 configurations can get a connection, it looks to me more like something wrong with the SIM card / provider settings than with the actual phones. But I can't really find more information online because I don't understand Japanese
Have you tried changing PAP/CHAP settings? That did it for me. Had to manually set encryption to CHAP (I think PAP is default). Otherwise no connection. Also had to type "default" for internet type connection.
Sjaakbanaan said:
Right now I have 2 ideas in mind:
Have you tried forcing the phone to UMTS? My Vibo SIM in Taiwan refuses any connection if I try running it in 2G, it's 3G exclusive. This Chameleon SIM could be 3G/4G only.
After some searching, I found that this Chameleon SIM possibly only supports UMTS on the 2100 MHz band: http://www.japanmobiletech.com/2012/05/b-mobile-amazon-lte-4g-data-sim.html. It is not exactly clear which UMTS bands are supported by the Droid 4. It looks like people expect the 2100 MHz band to be supported for UMTS though. Also you mention the same problem on your HD2 except when WM6.5 is installed, so that doesn't point to a hardware issue for the HD2. But for the Droid 4, it still could be.
I found a related thread (with no replies yet) about this: http://forum.xda-developers.com/showthread.php?t=1704264
If only 1 out of your 6 configurations can get a connection, it looks to me more like something wrong with the SIM card / provider settings than with the actual phones. But I can't really find more information online because I don't understand Japanese
Click to expand...
Click to collapse
I forgot to say something:
At previous trip, the U300 SIM can get data connection with all device:
HTC HD2(WM6.5)
HTC Sensation (2.36)
HTC Sensation XL(2.36)
Milestone 3(2.36)
With the same settings, all Android system fail to get connection in this time.
I can see the NTT DOCOMO network shows in my Droid4(CM9), but it can't get connection.
So I think my Droid4 has successfully register to NTT's network, but fail to make data connection.
It maybe something different in 3G and 4G 's data connection certification.
I think the problem is:What username and password Android sent to NTT in make connection process and how does NTT respond Android?
If there has detail logs in get connection process, maybe I cant find what problem is.
Does any APP can do this?
Die Bruine said:
Have you tried changing PAP/CHAP settings? That did it for me. Had to manually set encryption to CHAP (I think PAP is default). Otherwise no connection. Also had to type "default" for internet type connection.
Click to expand...
Click to collapse
Thanks for your suggest, I set it to PAP or CHAP before.(Users manual said that)
I have tried "CHAP" and "default" after looking your suggest, but it still can't get connection.
chowtom said:
I think the problem is:What username and password Android sent to NTT in make connection process and how does NTT respond Android?
If there has detail logs in get connection process, maybe I cant find what problem is.
Does any APP can do this?
Click to expand...
Click to collapse
Yes, but it shows a lot of other logging as well: you can download "aLogCat" from Google Play. It's a wrapper app around the built-in logcat command in Android, which can be used to show / filter the system log. I used this as well to investigate my data issue (but no luck). Hope you have better luck!
i got the same problem with bmobile - free data SUMAHO
i use this apn settings:
apn: bmobile.ne.jp
user: [email protected]
pass: bmobile
auth: pap or chap
when i check the log with logcat -b radio i get issues with USER_AUTHENTIFACTION and so one
i tried it with the stock-rom, cm 11 with and without GSM-fixes.
i can also get SMS and make phone calls, but data connection fails.
in my iphone 3gs the sim works fine.
are there any news or fixes?
maybe i can use another way to make a connection instead with the RIL-framework?
i actually got it working!
i install "PPP widget" and use this to connect :victory:
i use as (serial)port ttyUSB4
but i think its not the best way, but maybe the only possible
I've tried doing everything in this thread: http://forum.xda-developers.com/showthread.php?t=1591949
and I'm still not able to get data to work over GSM. I have data enabled in ##PROGRAM and all data options are enabled in settings and build.prop has verizon network set to 0.
Any ideas?
Droid 3 GSM Australia
Hi,
I'm in a similar situation to you. I assume you are able to make and receive calls?
I'm currently using a Droid 3 (from Verizon, XT862) in Australia.
I'm assuming it is already GSM unlocked, as I just put my SIM card into it and was able to make and receive phone calls and SMSs.
However, I am unable to get any sort of mobile data connection (besides WIFI).
I have tried tweaking the mobile network settings to use GSM/UMTS instead of Global network mode, but when I set up the APN...nothing happens.
I haven't tried I anything from that link from the other thread.
How do you go about changing the build. prop and adding
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
?
Thanks.
Yes I can make and receive calls fine.
also - in *#*#4636#*#*
Ping test: All failed Signal Strength: -51 dBm 31 asu GSM Service: In service GPRS service: Connecting Network Type: HSPA Radio Resets: 0 Data Attempts/Successes: 0
(If default APN)
GSM Disconnects: Data State: DcInactiveState disconnected with last try at 7:59AM fail because No Error
(If using selected APN)
GSM Disconnects: Data State: DcActivatingState is connecting to [ApnSettingV2] hk, 53, 45400, hkcsl,,,,,,-1,true,-1,0,0,*,IP,IP
Located in Hong Kong
Menu-Settings-Wireless&networks-mobile networks-access point names. Is points?
dinan said:
I've tried doing everything in this thread: http://forum.xda-developers.com/showthread.php?t=1591949
and I'm still not able to get data to work over GSM. I have data enabled in ##PROGRAM and all data options are enabled in settings and build.prop has verizon network set to 0.
Any ideas?
Click to expand...
Click to collapse
Gsm data is controlled via the apns under mobile networks. Ensure you are in gsm/umts mode and verify the correct apn is selected for your carrier. If there are no apns, hit menu > add apn and supply proper settings, they are either preloaded on the sim or listed on the carrier site. A quick google will also provide the correct info.
Also under data management, ensure data is enabled over mobile network. ##program ONLY changes cdma programming.
I've checked those and.the proper APNs are there. Also in UMTS mode.
Skreelink said:
Gsm data is controlled via the apns under mobile networks. Ensure you are in gsm/umts mode and verify the correct apn is selected for your carrier. If there are no apns, hit menu > add apn and supply proper settings, they are either preloaded on the sim or listed on the carrier site. A quick google will also provide the correct info.
Also under data management, ensure data is enabled over mobile network. ##program ONLY changes cdma programming.
Click to expand...
Click to collapse
Droid 3 GSM Australia
dinan said:
I've checked those and.the proper APNs are there. Also in UMTS mode.
Click to expand...
Click to collapse
How did you change the build.prop setting?
When I use a selected APN I get the same as you:
GSM Disconnects: Data State: DcInactiveState disconnected with last try at 9:59AM fail because No Error
Do you think it could be a problem with the radio?
If we flashed the XT883 radio, would that solve anything? or is it just an APN problem?
---
Edited the build.prop file. Not working either.
Droid 3 GSM Australia
dinan said:
I've checked those and.the proper APNs are there. Also in UMTS mode.
Click to expand...
Click to collapse
Have you tried flashing the XT883 radio.img onto it?
Apparently that one works sometimes
http://forum.xda-developers.com/showthread.php?t=1406812&page=21
There should be absolutely no problem with GSM/UMTS data connection and MMS with unlocked xt862, just enter apn manually and go.
My personal butthurt is EV-DO with non-Verizon CDMA networks as it's really the issue even if you try to hack as the phones with the same Qualcomm chipsets like Droid 2 Global.
I've became real expert in flashing CDMA settings and real guru in tweaking props and rils. But it doesn't help.
I say no Moto and no Android anymore. I'm going to buy WP8 handset as soon as it become available with CDMA. F**k Moto and Google, long live Microsoft which never disappointed me with WM handsets.
Sent from my DROID3 using Tapatalk 2
Theri0n said:
There should be absolutely no problem with GSM/UMTS data connection and MMS with unlocked xt862, just enter apn manually and go.
My personal butthurt is EV-DO with non-Verizon CDMA networks as it's really the issue even if you try to hack as the phones with the same Qualcomm chipsets like Droid 2 Global.
I've became real expert in flashing CDMA settings and real guru in tweaking props and rils. But it doesn't help.
I say no Moto and no Android anymore. I'm going to buy WP8 handset as soon as it become available with CDMA. F**k Moto and Google, long live Microsoft which never disappointed me with WM handsets.
Sent from my DROID3 using Tapatalk 2
Click to expand...
Click to collapse
there should not but there is
i also have this problem
the phone is new (or refurb i dont know it was a warranty replacement)
i supplied APN (correctly of course)
3g comes for a second and the it goes away
in my case its notrooted and STOCK
i would SBF the phone but there is no SBF for the latest version i
---------- Post added at 11:31 AM ---------- Previous post was at 11:29 AM ----------
toggle between CDMA and GSM
and in GSM between 2g and 3g
im going to try that and that have worked for me in the past (but with old retired mine & not this new one)
I have the same problem after reflashing phone with STOCK firmware. Motorola and Android is bull****, i will never buy them anymore.
contracara said:
Hi,
I'm in a similar situation to you. I assume you are able to make and receive calls?
I'm currently using a Droid 3 (from Verizon, XT862) in Australia.
I'm assuming it is already GSM unlocked, as I just put my SIM card into it and was able to make and receive phone calls and SMSs.
However, I am unable to get any sort of mobile data connection (besides WIFI).
I have tried tweaking the mobile network settings to use GSM/UMTS instead of Global network mode, but when I set up the APN...nothing happens.
I haven't tried I anything from that link from the other thread.
How do you go about changing the build. prop and adding
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
?
Thanks.
Click to expand...
Click to collapse
have you or any of you solved this problem with the data conection in gsm networks for the droid 3?
Anyone else on AT&T unable to get LTE? The APN settings that auto-downloaded are correct according to AT&T's documentation, but I'm only getting H+.
Your GPRS could be disconnected. I'd you use app advanced signal status you can look at settings Beyer to see if your set up correctly
MasterBrick SCH-I545 Galaxy S4, XdA mobile app...
I had to use my girlfriends IMEI for her Nexus 5 for it to pick up LTE. Before that, I was only getting H+. Try to get an IMEI of another ATT LTE Android phone and it should do the trick!
Can't get LTE to work
I need some help. I have the new, unlocked, Sony Xperia Z3 Compact and I can't get on the AT&T LTE network as well. Here are the steps I have taken:
The Setup
I have a Samsung Galaxy S4 that is on the LTE network with no problem
My AT&T account had a Lumia 820 device tied to my account (and old device of mine) and it worked fine for LTE on all of my future pones, including my S4
I purchased an unlocked D5803 Z3c from Handtec
My Activate Attempt
Went to the AT&T store to pick up a new nano sim card
I gave my new (Sony) IMEI number to the AT&T rep (stupid move, clearly) and they loaded it under my account
With the new sim, my Z3c could place calls and send/receive text messages
Data would not work
My Resolution Steps
I looked up APN settings online and tried several different variations
The HSPA+ Cingular APN settings worked, but left me without LTE service
I could not get the mobile.att.net APN and LTE settings to work
Reading Android Central and XDA, I discovered that others had this issue as well
Using forum advice, I called AT&T
The AT&T rep did confirm that my Sony IMEI number was registering as a "2G" phone, which is why I did not get LTE access
I put one of my extra LTE device IMEI numbers on my account
My phone still won't connect to the LTE network
I notice that even though they registered an LTE phone (and they confirmed it came up LTE), my AT&T account page shows an old flip phone silhouette
The rep noted that there was nothing else they can do...so I basically have to deal with it
I'm posting on XDA to leverage the wisdom of this crowd
I remain confident that this will get resolved, yet frustrated at the same time
I'm at a loss and wonder if I have to activate this nano sim in another supporting device or the like. Thoughts?
Thanks in advance for your help.
No clue, but AT&T tech support confirmed that my IMEI is registered and my previous two devices were all LTE devices. I have no idea what's going on either.
lolstebbo said:
No clue, but AT&T tech support confirmed that my IMEI is registered and my previous two devices were all LTE devices. I have no idea what's going on either.
Click to expand...
Click to collapse
Are you having the same issue? Do you see the cartoon sketch of a flip phone in your account as well?
What you have to do is give them the imei of an LTE capable phone. It absolutely does not matter that you will not actually be using that phone.
If you already have an LTE phone, just switch your SIM to your z3 when it arrives. It is absolutely unnecessary to call AT&T with your new IMEI. Anything AT&T tells you to the contrary is flat out wrong.
Issue resolved!
Bottom line...do not give these clowns your Xperia IMEI number.
When they entered the IMEI number it flipped my data plan from a grandfathered unlimited plan to a pay-per-use plan with no LTE (why they couldn't figures this out last night, it beats me). He was talking about my wife's plan and her unlimited data. I then noted "mine is unlimited too" and then said it wasn't. You can only imagine how things went from there.
The unrecognized IMEI number automatically switched me off of my plan.
They have me on a temporary 3GB plan, as the support rep couldn't get me back on the unlimited plan. They have to send the change to their back office team and it will take a week to get it back.
My phone now has the 4G icon versus H+.
Sent from my D5803 using XDA Free mobile app
ktcred said:
Are you having the same issue? Do you see the cartoon sketch of a flip phone in your account as well?
Click to expand...
Click to collapse
Nope, it actually still shows my previous LTE-capable phone.
I actually also initially had this issue ; I was sitting in the AT&T &T store on the phone with tech support until the sales rep realized my phone wasn't showing up in the system as an LTE device. He input a bogus LTE IMEI for me, after which I restarted my phone. It's been working for me since then
Whelp, I guess I'll go to the AT&T store again later, then.
So everything that is claiming to have LTE ----> Do you have a 4G icon on your phone or LTE? I am in US, went to ATT store ---they entered an imei of a Samsung Galaxy S5 and now it shows 4G. If you go into mobile networks preferred network mode it says 4G preferred/wcdma/gsm. I am assuming this is just due to the UK software version not being the same as US...
macklobell said:
So everything that is claiming to have LTE ----> Do you have a 4G icon on your phone or LTE? I am in US, went to ATT store ---they entered an imei of a Samsung Galaxy S5 and now it shows 4G. If you go into mobile networks preferred network mode it says 4G preferred/wcdma/gsm. I am assuming this is just due to the UK software version not being the same as US...
Click to expand...
Click to collapse
Says 4G. I think we are good
Sent from my D5803 using XDA Free mobile app
IMEI problem rectified, they reverted it to my previous phone's IMEI. Now displaying 4G. Sweeeeeetness.
It's just silly that AT&Ts LTE is tied to the IMEI in their system and not simply having an LTE capable phone.
I ported a line to use with my Z3c and gave them the IMEI of an AT&T HTC One so that LTE would work, but they would only send me a micro sim because according to the IMEI that's the sim I need. Tried to tell them I need a nano sim but the gal on the phone said she couldn't send one, I'd have to go to a store pick one up.
If you are going from an LTE phone that uses a nano SIM card to the Sony Xperia Z3 compact, it is not necessary to contact AT&T. You will need to manually add the APN settings on your Sony Xperia Z3 compact. Here is the path to get to the APN settings..
Settings > More > Mobile networks > Access Point Names > press + to add a new APN
Enter in the following settings listed below
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC http://mmsc.mobile.att.net
MMS proxy proxy.mobile.att.net
MMS port 80
MCC 310
MNC 410
Authentication Type None
APN type default,mms,supl,hipri
APN protocol IPv4
Bearer Unspecified
Save the changes you made, select the APN you just created and reboot the phone. Everything should be working from there.
Here is where I got the information from: http://www.att.com/esupport/article.jsp?sid=KB424489&cv=820&_requestid=838329#fbid=ecLfo9YLvXa
So I do have the 4g icon in my status bar. Does this mean that LTE is working fine?
The only reason I am asking is because on the MY ATT page I do only see the silhouette of a flip phone.
Edit: My phone automatically downloaded internet and MMS settings when I first booted it up. Is this what others are doing?
Alex2x3 said:
So I do have the 4g icon in my status bar. Does this mean that LTE is working fine?
The only reason I am asking is because on the MY ATT page I do only see the silhouette of a flip phone.
Edit: My phone automatically downloaded internet and MMS settings when I first booted it up. Is this what others are doing?
Click to expand...
Click to collapse
Yes, you are getting LTE on your phone
LTE = 4G in Europe
4G = H+ in Europe
3G
etc
If you do a speed test, you will see that you are getting LTE speeds on your phone
Problem here too. I just went in to get a nano sim. The guy hooked up my number from a note 2. Does not show data. He said I needed to put in my IMEI number from the box. I didn't from recommendations on here. The problem is that I didnt have a rebutle sp? Because I really don't know how it works. He said if my note 2 was lte, it should work. I don't know what the heck to do
Notchr302 said:
Problem here too. I just went in to get a nano sim. The guy hooked up my number from a note 2. Does not show data. He said I needed to put in my IMEI number from the box. I didn't from recommendations on here. The problem is that I didnt have a rebutle sp? Because I really don't know how it works. He said if my note 2 was lte, it should work. I don't know what the heck to do
Click to expand...
Click to collapse
I would try again, maybe try to get a different service rep. The IMEI from an AT&T Note 2 should work.