Database Develop

[Q] no 4g or lte on stock or custom rom

So I've had this phone for almost a week now and I used to he able to get 4g LTE. But ever since I rooted it, I no longer get more than 3g. I now have bananacakes Holiraider 1.6 but I still don't get any higher than 3g. So my question is how do I get 4g and 4g lte. Oh and if anyone is using that custom Rom, is it possible to get faster than 1512? In his thread it shows you can clock it to 1566. Thanks a bunch I'm kinda new to this!

try dialing *#*#4636#*#* and see what your modem is set to, it should be GSM/WCDMA/LTE auto
you also may have an APN issue, verifiy that your APN is correct, perhaps contact your carrier for the correct APN settings for you phone and plan.

Well I'm now running a custom ROM. The apn is the same as other users and it does say the above. And yes I am in a 4G LTE area
Sent from my HTC Raider X710e using XDA App

Try doing the above and change to LTE only.
Then once you have 4G change it back. It should stay on 4G. I had to do this to get 4G on official rom.

Ok I just tried that but it wouldn't let me to switch it to LTE only. When I did, it switched it back to GSM/WCDMA/LTE auto. I'm just gonna relock my phone and set it back to the original stock rom and format my phone (yes I have the apps and stuff backed up). Because my actual mobile connection fluctuates on and off as well

the phone should be locked into the GSM/WCDMA/LTE setting. If you try to change it from that setting it just returns back. The phone will get instructions from the carrier's base station to tell it whether to be on LTE or just 4G/3G. Using *#*#4636#*#* under phone information, what is listed as the Network type?
bangorang said:
Ok I just tried that but it wouldn't let me to switch it to LTE only. When I did, it switched it back to GSM/WCDMA/LTE auto. I'm just gonna relock my phone and set it back to the original stock rom and format my phone (yes I have the apps and stuff backed up). Because my actual mobile connection fluctuates on and off as well
Click to expand...
Click to collapse

It is locked in GSM/WCDM/LTE auto.

above that option it should tell you the network type. it is about half way between the "run ping test" button and the "Set Preferred Network type" option. Need to know what it says there.

Oh ok I see what you mean, it says HSDPA

make sure that you are in a active LTE area. toggle the radio off and on. the network type should change to LTE if it is available. remember that if you make a phone call your phone will drop back to just 4g/3g and it might take a second for it to switch back to LTE.

I live in Los Angeles so I'm like in the center of the LTE center in Southern California. But for some reason my phone won't get anything higher than 3G, and my actual cellphone reception toggles on and off randomly too.

It worked before. For the first 3 days atleast. And now all of the sudden it wouldn't work, so I rooted it and installed a custom ROM

Try one of WildChilds custom ROMS. LTE works on both and they're tailored to US users.
Sent from my HTC PH39100 using xda premium

if the problem arised before you rooted and rom'd the phone I doubt the rom is the problem. there is always the chance that you have a bad radio.

rft3ch said:
if the problem arised before you rooted and rom'd the phone I doubt the rom is the problem. there is always the chance that you have a bad radio.
Click to expand...
Click to collapse
That's what I'm thinking... What would I do about this?

i would verify your sim with another 4gLTE phone and vice versa.

Hrm... So it could be a Sim card problem eh? Unfortunately there are no other LTE devices for me to get a hold of... Would this be the only way?

it could be. i hope you have pulled battery/sim and then rebooted already. you can verify your phone with a known good sim and verify your sim with a known good phone. I would try your local at&t store. they might be able to help.
bangorang said:
Hrm... So it could be a Sim card problem eh? Unfortunately there are no other LTE devices for me to get a hold of... Would this be the only way?
Click to expand...
Click to collapse

rft3ch said:
it could be. i hope you have pulled battery/sim and then rebooted already. you can verify your phone with a known good sim and verify your sim with a known good phone. I would try your local at&t store. they might be able to help.
Click to expand...
Click to collapse
I have done it many times . Yeah I'm actually going to head over to the at&t store in a few minutes, I'll keep you posted. Thank you so much for your help! rft3ch!

I will be replacing my phone. I replaced the sim card and that wasn't the problem . The rep said that someone else came in with the same problem as well.

[Q] Worth buying Droid 4 as GSM phone?

I thinking about buying D4 as my prime phone. I already find out that It supports GSM and how to unlock this feature. But is it worth to buy this phone to work on GSM? I noticed that there are many issues with it:
- not working callout on 3G on Android 2.3
- Verizon lockscreen that wants to activate phone
- problems with APNs
etc.

zwierzak said:
I thinking about buying D4 as my prime phone. I already find out that It supports GSM and how to unlock this feature. But is it worth to buy this phone to work on GSM? I noticed that there are many issues with it:
- not working callout on 3G on Android 2.3
- Verizon lockscreen that wants to activate phone
- problems with APNs
etc.
Click to expand...
Click to collapse
Yes! It's definately worth it!
The 3g callout problem is a temporarily thing, I'm sure of it. We're still playing with settings and drivers to fix that. In the mean time I use my phone on 2g for voice and 3g for iinternet. With one press of a button I can switch between 2g and 3g (There's an app for that )
The verizon lock screen pops up only once. Once you skip it, it doesn't return until you reset your phone to factory defaults.
Problems with apn's? Depends on your provider. I didn't have any problems at all.My apn settings were transferred automatically to my D4 when my provider detected that I was using a new phone. Even after installing different roms.
I'm using my D4 a couple of weeks and everything still works like a charm.

vmu said:
Yes! It's definately worth it!
The 3g callout problem is a temporarily thing, I'm sure of it. We're still playing with settings and drivers to fix that. In the mean time I use my phone on 2g for voice and 3g for iinternet. With one press of a button I can switch between 2g and 3g (There's an app for that )
Click to expand...
Click to collapse
Mainly I work on 2G because of battery saving (it last for much longer!). But bug with callout has been patch in leaked ICS and what I heard it don't have Verizon stuff installed. I can't wait that some CFW ICS would use its libraries and kernel.
Unfortunately for now I can't afford on buying it because last 10 days jump over 10% according to my currency so it, when previously it had very good price then now it isn't.

I love it. I'm in Canada on Bell Mobility and everything works perfectly on Gingerbread, including outgoing calls on 3G. I think the voice issue is only affecting those within the USA on other carriers such as AT&T.
Sent from my DROID4 using xda premium

Whats the difference in using 2G or 3G for voice calls?
Isn't it the same?
Also, I wanted to use this phone on AT&T in the US. I just have voice and texting. Will this phone work for me?

Rick#2 said:
I love it. I'm in Canada on Bell Mobility and everything works perfectly on Gingerbread, including outgoing calls on 3G. I think the voice issue is only affecting those within the USA on other carriers such as AT&T.
Sent from my DROID4 using xda premium
Click to expand...
Click to collapse
Hi there,
did you have the chance of direct comparison to the Droid 3's signal quality, 3g speeds and call quality? I may consider importing it, but still not sure.
THANKS

It seems to work just as well as my Droid 3 did. The only issue I have is that the Droid 4 seems to underreport the signal it is receiving in the status indicator, the highest signal I've been able to see is 3/5 bars but it still seems to perform as if it were at 5/5.
I'm sure it is just tampering by Verizon and doesn't hinder the device's operation at all. I haven't tried any of the AOKP ROMs yet but will report back once I get a chance to install one.

Thanks for the reply!
Thats interesting, it's like the Droid 3 cheating on us that the GSM Signal would be very poor. Would you please have a look in the build.prop if there is a value ro.mot.phonemode.vzwglobalphone and set it to 0? Then prove if the signal gets better?
News about Droid 4 GSM unlocking this summer:
http://www.droid-life.com/2012/05/2...er/?utm_source=twitterfeed&utm_medium=twitter

Interestingly enough, in the ICS build just leaked that has global support enabled by default, that value is set to 0 in the build.prop.
I am in the US and a VZW user, so I can't test the GSM radio performance on the D4 because they have disabled it for US carriers via another band lock or other mechanism.
I have been dumping and comparing the NVM of the various builds to try and isolate any critical differences to find the key. It may not, in fact, be in the NVM at all, but elsewhere in the radio image.
Just an FYI.

gtmaster303 said:
Whats the difference in using 2G or 3G for voice calls?
Click to expand...
Click to collapse
There is difference in voice codec (on 3G you should get better quality, but it also depends on the second side). Also at 3G you can use front cam for video conferences.

Rotkaeqpchen said:
Thanks for the reply!
Thats interesting, it's like the Droid 3 cheating on us that the GSM Signal would be very poor. Would you please have a look in the build.prop if there is a value ro.mot.phonemode.vzwglobalphone and set it to 0? Then prove if the signal gets better?
News about Droid 4 GSM unlocking this summer:
http://www.droid-life.com/2012/05/2...er/?utm_source=twitterfeed&utm_medium=twitter
Click to expand...
Click to collapse
Yeah, the first thing I did once I could was look at the build.prop settings but I noticed that ro.mot.phonemode.vzwglobalphone is already set to 0, with a note in the comments above it that "the definition moved to cdma_maserati.mk to support different config for factory", which suggests that maybe their tampering is a little more hard-coded into the Blur interface.

Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution

Droid 4 On Rogers Wireless (Canada) - Incoming "Pay Phone" caller ID Solution
I recently got my XT894, Droid 4 in the mail, and hooked it up to Rogers Wireless in Canada.
When I was receiving phone calls, the built in dialer would tell me that "Pay Phone" is calling, the solution to contact the Rogers Customer Care, and have them remove the "Name Display" option.
Rogers has 2 services for call display:
Name Display (which does a phonebook lookup from Roger's Side)
Call Display (the number of the dialer who is trying to dial you)
Most motorola radios don't actually support these 2 features together, so Blur reads it as "Pay Phone". After contacting Customer Service, have them remove ONLY "Name Display". I restarted my phone then everything started working properly again.
I hope this helps someone!

First off, I wanted to say that I'm on the leak 6.16.206
I also got mobile hotspot working on Rogers (this solution may apply to other rooted users running on different providers).
I added the APN settings as defined originally here: http://forum.xda-developers.com/showpost.php?p=20366961&postcount=2
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: dun
otherwise, any other fields are showing as <not set> OR None
When I tried to add dun to the apn type, the moto UI told me only providers could add DUN types, so I went into SQLite Editor -> Phone/Messaging Storage -> telephony.db -> carriers -> Located the last APN which I added manually, scrolled over to "type" then long pressed that field, chose "edit field" and added dun. Once completed, I restarted my phone. I now have the stock mobile hotspot app working (I had to also disable the entitlement check earlier) on Rogers!

Now wait, you got a Droid 4 working on Rogers????

bean1975 said:
Now wait, you got a Droid 4 working on Rogers????
Click to expand...
Click to collapse
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS

I can confirm that the Droid 4 works on Rogers. Took a week of fiddling, but it works.
Received the Droid 4 with 2.3.4 installed. Did the over-the-air updates to 4.0.4. Rooted it, installed SafeStrap 3, and installed Olegfusion's CM10/JB ROM (4.1.2), and was off to the races. Shows "E", "3G", and "H" when accessing the Internet.

have you ever try with stock kernel?
I wonder not to update to CM10 right now. I have a problem, it seems to connect, 3G/H letter, bu no tranmition. I have an old jaj, Droid3 working perfectly with same APN records.
Any thing that could help me??

danifunker said:
Yup, no LTE though, just GSM HSPA
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Please help... What does that mean?????
(I'm an imbecile about this stuff!)

heymon79 said:
Please help... What does that mean?????
(I'm an imbecile about this stuff!)
Click to expand...
Click to collapse
LTE on this phone is not compatible with the Rogers network. If you want a Rogers LTE phone, pickup the Motorola RAZR HD. The phone will operate on 3G or 3.5G, although we in Canada consider HSPA+ to be "4G".
LTE can give you rates of up to 100mbps usually gives you about 25-30mbps
HSPA+ can give you rates up to 12-15mbps I usually get 4-5mbps
I hope that helps!

how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?

imeem said:
how hard is it to get Droid 4 to work with Canada (Rogers)?
Do u have to have unlock it and then update to ICS, and then you're all set?
Click to expand...
Click to collapse
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html

danifunker said:
The phone comes unlocked, you just have to load up ICS and throw on the Rogers APN (rogers-core-appl1.apn) and you're good. If you want to do some of the advanced features like setting up wireless tethering and stuff along those lines, you'll need root. I created a full Rogers how-to on droidforums.net, you can view it here :
http://www.droidforums.net/forum/droid-4-general-discussion/224932-help-using-droid-4-canada.html
Click to expand...
Click to collapse
so you're saying that all droid 4 are already unlocked?

Yes. They are still blocked against US GSM carriers but will work fine everywhere else, no locks.
Sent from my DROID4 using Tapatalk

Maybe someone can help me, I'm on Rogers. I have this same issue on Stock ICS .217 and on CM10. I can make phone calls and send text messages, but I cannot receive either. When I put my sim card in to another phone, I start getting my text messages. Any ideas on how to remedy this?

Have you tried another SIM card in your phone? Sounds like you have something wired. I would also check to make sure you are in global mode on the phone.
Sent from my XT894 running CM10

BTW where did u guys get your droid 4 if you're from canada? from ebay?

imeem said:
BTW where did u guys get your droid 4 if you're from canada? from ebay?
Click to expand...
Click to collapse
I got mine from xda but now that's closed...
Sent from my XT894 running CM10

eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.

Terrible Reception on Telus (stock 217, -100dBm)
bean1975 said:
eBay, yes.I got mine as "bad ESN" from a liquidator, it was quite a good deal. Obviously, by now you can find clean ESN versions for below $250.
Anyways, I am on Koodo/Telus. Under Mobile Networks Settings / Network Mode set GSM/UMTS and Select Network must be UTMS only, the default finds GSM which is weird because Telus AFAIK does not even have a GSM network! It has CDMA, HSPA+, LTE even iDEN but not GSM. Before I forced UMTS, phone calls worked more or less but mobile data rarely. Since I forced UMTS I get mobile data everywhere, inside buildings, all that -- I had lots of reception problems with Wind Mobile, Telus is infinitely better.
Click to expand...
Click to collapse
I went through the process today and got my stock Verizon 217 Droid 4 working on Telus. I verified the Telus APN settings, went through forcing GSM/UMTS and UMTS-only mode, but still have terrible reception: 1-2 bars, -100dbM. Any thoughts for getting better signal?

[SOLVED] DROID 4 Canada SMS/voice only, no data on Rogers/Fido - help!
SOLVED! see below.
Droid 4 from Ebay, $135 or something + shipping. Replacing my string of bad luck with i927's from smartphone_wholesale (aka Cell Phone Forever) on ebay (tho the 1st one they sent was great til i lost it).
SMS/Voice is fine but cannot do any cell data on it. Following all settings on fido's site for APNs the fido-core-appl1.apn doesnt work. Had to manually put it in (APN list was blank). Tried my wife's Roger's sim, it populated the APN list itself (4 of them, all combos of internet w or w/o MMS, and rogers +/- 'internet' in the name). None of them work either (they match what's in the fora here and on the rogers site, rogers-core-appl1.apn etc).
Im a bit of a newb: is my phone not unlocked properly or something? What gives? Radio is set to global or GSM/UMTS (CDMA doenst work of course). What's the solution here?
System version: 98.72.18.XT894.Verizon.en.US
Android Version: 4.1.2
Baseband Version: CMDA_N_05.25.00R LTEDC_UI_09.1D.00
Kernel: 3.0.8-g473e586
Build #: 9.8.20-72_VZW-18 Feb 8 13:11:57 2013
yes mobile data is on (and roaming set to yes but phone states it's not roaming now)
every time i've added apn's and saved i've rebooted (and rebooted twice with wife's SIM in too, in case settings had to go sim -> phone + reboot, etc). No luck any way ive tried.
Thanks for help.
[UPDATE]
belay that request cadet!
Ok I just removed the wife's sim and put mine in, rebooted, and this sim (fido) doesnt populate the APN list. I was in the middle of inputting settings for it, hadn't finished and a buncha text+ came in and wifi is off (I saw I was on Edge, big blue E on status bar). Then before I could even react I had hit save, and data turned off.
Yep, removing "internet" from the APN 'type' works fine. Leave it blank.
W t f. Maybe someone can explain that shiz to me.

Problems applying gsm unlock

Hi,
i have a verizon droid 3, i live in Argentina and im trying to get the 3g running...
I applied the radio flash described here. 3g is still not working, but now Swype is also not working.
When I try to use it it says something about the license and it doesnt work.
I first tried it with the build.prop with the model=xt883, then changed it to droid3 but still no luck.
Anyone knows how to fix, at least my scrybe issues? And if anyone else can help me with the 3g would be awesome
Thanks!

What exactly is it not doing. And swype is probably another issue entirely.
Sent from my XT883 using XDA

axel.isr said:
Hi,
i have a verizon droid 3, i live in Argentina and im trying to get the 3g running...
I applied the radio flash described here. 3g is still not working, but now Swype is also not working.
When I try to use it it says something about the license and it doesnt work.
I first tried it with the build.prop with the model=xt883, then changed it to droid3 but still no luck.
Anyone knows how to fix, at least my scrybe issues? And if anyone else can help me with the 3g would be awesome
Thanks!
Click to expand...
Click to collapse
Huh? You changed the model in build.prop to Droid 3? Pretty sure its supposed to be xt883 in the first place, your supposed to use the build.prop in the thread
And I thought the droid 3 was a global phone anyway, even the verizon version

Swype doesnt work at all, its activated but not working.
I changed the model in the build.prop just to see if this was the problem, but apparently something in the radio.img has broken my swype. Is that possible?
Btw, droid3 isnt global. Here in latin america is known as milestone 3, and apparently verizon's droid 3 is a pain in the ass if you want to use 3g here...
Sent from my DROID3 using xda app-developers app

Any ideas... ?
Sent from my DROID3 using xda app-developers app

If you are using this device is South America then why are you trying to band unlock it? The band unlock was designed for use with AT&T & T-Mobile inside the US. If you are using outside of the US you do not need to perform this procedure.
You probably should flash your device back to stock, make sure you sim unlock it and setup your APN settings.
After flashing back to stock reboot in recovery(hold x then press and hold power, then volume up & down once you see the android!) and perform a factory data reset. Hopefully this will solve your swype issue as well.

DevicesNow said:
If you are using this device is South America then why are you trying to band unlock it? The band unlock was designed for use with AT&T & T-Mobile inside the US. If you are using outside of the US you do not need to perform this procedure.
You probably should flash your device back to stock, make sure you sim unlock it and setup your APN settings.
After flashing back to stock reboot in recovery(hold x then press and hold power, then volume up & down once you see the android!) and perform a factory data reset. Hopefully this will solve your swype issue as well.
Click to expand...
Click to collapse
what he said
the GSM BANDLOCK is only to prevent the phone to connect to USA networks but in southamerica as long as you have the 850 band it should work! (ATT, TELCEL MX, Others)
you should flash the stock mentioned by devicesnow
(link in my signature if you have/had version xt862 v 5.6.890 or before if you had version 5.7.90X then there are other SBFs that would help)
once in stock change to GSM mode and add APNs if you are on an 850 network it should give 3g and in an 800 (like t-mobile in USA) network should give you edge
also check you are SIM-unlocked (different from band unlocked) so you can detect sims different to verizon.

What a coincidence, I bought my Droid to DevicesNow in eBay haha
When I first received it, it never worked in 3G... I have the APN set up and everything, but still not working...
I'm now using a non-Verizon sim for calls and sms, so the phone is sim-unlocked right?
I'll try applying the sbf, but since it never worked frm the first minute.. I don't think it wil now.
Thanks for your help.

axel.isr said:
What a coincidence, I bought my Droid to DevicesNow in eBay haha
When I first received it, it never worked in 3G... I have the APN set up and everything, but still not working...
I'm now using a non-Verizon sim for calls and sms, so the phone is sim-unlocked right?
I'll try applying the sbf, but since it never worked frm the first minute.. I don't think it wil now.
Thanks for your help.
Click to expand...
Click to collapse
Hello axel.isr,
The Motorola Droid 3 works on 3G Networks HSDPA 850 / 1900 / 2100. Claro, Personal & Movistar all support 850/1900.
Yes the device is sim unlocked if you are using already for voice and sms. If it wasn't sim unlocked you would be promoted to enter a sim pin code upon powering up the device with your non network sim card installed.
Which device were you using prior to the D3? Do you have a data plan associated with your sim card? Which carrier exactly are you using and what APN settings have you entered into the device?
You can download an app that automatically enters your carriers APN settings for you called tweakker here.

So.. I went back to stock with the sbf, wiped data and everything but still no 3G.
I tried using my sim card in a ZTE N720 and I get 3g connection.
I've tried a lot of apn settings but none of them worked, I also tried Tweake with standard and alternative settigns but still no luck...
Should I have to change the radio, baseband or something? I already have the radio set up to work on GSM auto (prl).
Sent from my DROID3 using xda app-developers app

Maybe you could try the 883 radio and build.prop?
Sent from my xt862 using xda app-developers app

What APN are you using?
Try turning off airplane mode then turning it on again

SuperbigextremeFacepalm for me!
I called my carrier to get the apn setting again, changed it and now I at least get Edge connection
If I want to get 3G instead of Edge is there something I can change in my D3 settings or it has something to do with the 3g coverage in my area?
Btw, thanks a lot to everyone for helping me out. Specially to DevicesNow for my awesome D3, I totally love it <3
Sent from my DROID3 using xda app-developers app

Glad to see your up and running.
3G will work when in coverage areas and there isn't anything that would need to be done to enable this.

[Q] Can Lumia 928 be used overseas ?

Hello all- I have not found a definitive answer so will post my question here as well. I have a chance to get a Lumia 928 (Verizon) but would like to know if I can use it in New Zealand with my Vodafone SIM. I am not sure if there will be limitations such as maps, etc.. not working.
Cheers for any help, LL13- :victory:

LTE will not work in any country besides the US. Aside from that the 928 shouldn't have any issues with taking a different SIM, as all 928s are SIM unlocked when they shipped from the factory. Before you leave though, I highly recommend you download access point via sysapp pusher in the marketplace/store. Sysapp will check for any and all OEM apps that need updating.

thals1992 said:
LTE will not work in any country besides the US. Aside from that the 928 shouldn't have any issues with taking a different SIM, as all 928s are SIM unlocked when they shipped from the factory. Before you leave though, I highly recommend you download access point via sysapp pusher in the marketplace/store. Sysapp will check for any and all OEM apps that need updating.
Click to expand...
Click to collapse
Thank you for your help thals.... !
OK that good to know. Will take of that then !!!!
Cheers, LL13- :good: :good:

lamplighter13 said:
Thank you for your help thals.... !
OK that good to know. Will take of that then !!!!
Cheers, LL13- :good: :good:
Click to expand...
Click to collapse
The one warning I would give you with the 928 is that the APN settings are a little messed up, and you may need to play around with it a bit to get them to work. My experience (using the 928 on AT&T and T-Mobile in the US) is that you need to manually set the APN settings, even when Nokia Access Point says that the SIM settings are activated. You can usually get data fine, but MMS's don't work properly if you don't manually set the APN
If possible, avoid doing it with Nokia Access Point, because if you do you will lose the ability to use LTE when you get back on Verizon until you do a hard reset (you can't recover the appropriate Verizon LTE APN settings - it will only connect to CDMA 3g). Now that GDR2 is out, you can seemingly manually set the APN's in the Cellular menu of settings, so try using that first and if it fails, copy the correct APN settings into a new Access Point APN, then manually activate it. This has fixed my issue every time, but again, necessitated a hard reset / wipe of the phone to use on Verizon's LTE network.

Cheers for that information AR...
I can enter those settings manually, I've got them memorised :silly:
Cheers again, LL13- :good:

Wow very confusing topic, I mean the process of finding out whether data/mms will work outside of Verizon US, it seems it can not. Too bad as it's a beauty of a phone.
Cheers, LL13-

lamplighter13 said:
Wow very confusing topic, I mean the process of finding out whether data/mms will work outside of Verizon US, it seems it can not. Too bad as it's a beauty of a phone.
Cheers, LL13-
Click to expand...
Click to collapse
Its not that quite confusing.
LTE is only good for the country it was released in. The international LTE bandplan is different for every country, none of them match up. For using a CDMA carrier, switching to them will require a SIM (there isn't any way to flash the settings onto the phone yet for those providers who don't yet have LTE without it being official from Nokia) so its kinda a dead end.
If your going to a GSM provider, just insert your SIM and manually add the settings for data and mms. You can use Access Point if you don't intend on using Verizon's LTE.
Sent from my RM-860 (Lumia 928) using the OFFICIAL Tapatalk app.

thals1992 said:
Its not that quite confusing.
LTE is only good for the country it was released in. The international LTE bandplan is different for every country, none of them match up. For using a CDMA carrier, switching to them will require a SIM (there isn't any way to flash the settings onto the phone yet for those providers who don't yet have LTE without it being official from Nokia) so its kinda a dead end.
If your going to a GSM provider, just insert your SIM and manually add the settings for data and mms. You can use Access Point if you don't intend on using Verizon's LTE.
Sent from my RM-860 (Lumia 928) using the OFFICIAL Tapatalk app.
Click to expand...
Click to collapse
That makes me a bit more comfortable, cheers for that information thals1992 !!
It seems that the main issue would be with the LTE which would not be a problem since I am not even sure what it is !! I believe it may have to do with 4G or fast download speeds but there is no 4G in my town anyway.
I saw one post on another forum saying that some 928's had no way to add/edit APN settings, etc...
Each post and person seems to have a different experience, but if I can simply get a 3G data connection and normal use I would be happy.
I may just go for it then.
Cheers again, LL13-

lamplighter13 said:
Wow very confusing topic, I mean the process of finding out whether data/mms will work outside of Verizon US, it seems it can not. Too bad as it's a beauty of a phone.
Cheers, LL13-
Click to expand...
Click to collapse
When you travel abroad and use the phone on a GSM carrier you will get data up to HSPA+, unless the carrier happens to share Verizons LTE band. The issue with Verizon LTE after you have used another APN is that Access Point won't deactivate all the APN settings,and since Verizon doesn't have dedicated APN data settings, it doesn't override properly and connect toVZW LTE properly without a hard reset.
The 928 has a CDMA radio as well as a fully unlocked GSM radio

Access Point App and Verizon LTE
AR2186 said:
When you travel abroad and use the phone on a GSM carrier you will get data up to HSPA+, unless the carrier happens to share Verizons LTE band. The issue with Verizon LTE after you have used another APN is that Access Point won't deactivate all the APN settings,and since Verizon doesn't have dedicated APN data settings, it doesn't override properly and connect toVZW LTE properly without a hard reset.
The 928 has a CDMA radio as well as a fully unlocked GSM radio
Click to expand...
Click to collapse
I have also experienced this loss of Verizon LTE after using the Nokia Access Point app and foreign SIM in Europe. Does anyone know if there is a way to get LTE back other then hard resetting the phone?

TrophyUser123 said:
I have also experienced this loss of Verizon LTE after using the Nokia Access Point app and foreign SIM in Europe. Does anyone know if there is a way to get LTE back other then hard resetting the phone?
Click to expand...
Click to collapse
a hard reset is required as the access point app changes the LTE settings and can't change it back completely.
Sent from my RM-860 using Tapatalk

I can get dataconnection in sweden, and i can install the nokia app for changing APN, and i can change the APN manually too, but i cannot get MMS to work, nor in or out.
any suggestions? i talked to my carrier and they helped me with the right info, but nada.

agazza said:
I can get dataconnection in sweden, and i can install the nokia app for changing APN, and i can change the APN manually too, but i cannot get MMS to work, nor in or out.
any suggestions? i talked to my carrier and they helped me with the right info, but nada.
Click to expand...
Click to collapse
Try limiting the connection to 3G or 2G. T-Mobile users reported this as a workaround.
Sent from my Lumia 928 (RM-860) using Tapatalk

thals1992 said:
Try limiting the connection to 3G or 2G. T-Mobile users reported this as a workaround.
Sent from my Lumia 928 (RM-860) using Tapatalk
Click to expand...
Click to collapse
this Doesnt work either :/